How to run Pro Tools 7.4 LE and Logic Studio 8.0.2, simultaneously..

My setup: single Quad Core 2.8GHz 8GB of RAM, running Logic Studio 8.0.2 (projectmix)
Single 1.8 GHz G5 running Pro Tools LE 7.4 (digi 002 rack)
I want to set up Logic (as master) as my main sequencer, to run Pro Tools for audio.
What's the best setup?
1. Midi the two interfaces together, sync by MTC, or Midi Clock….if so, what are the settings, as I had an unsuccesful run at it using MTC...
or
2. Run both programs on my Quad Core - is there a way to have Logic run Pro Tools on the same machine - with two different interfaces on separate firewire ports?
Any info would be appreciative.
Thanks

Monster Mash wrote:
My setup: single Quad Core 2.8GHz 8GB of RAM, running Logic Studio 8.0.2 (projectmix)
Single 1.8 GHz G5 running Pro Tools LE 7.4 (digi 002 rack)
I want to set up Logic (as master) as my main sequencer, to run Pro Tools for audio.
What's the best setup?
1. Midi the two interfaces together, sync by MTC, or Midi Clock….if so, what are the settings, as I had an unsuccesful run at it using MTC...
or
2. Run both programs on my Quad Core - is there a way to have Logic run Pro Tools on the same machine - with two different interfaces on separate firewire ports?
Any info would be appreciative.
Thanks
I did the following:
Set up the audio output for the Logic to be the internal sound card, and hook up this via Digital lightpipe to the Digi002 rack lightpipe inputs, set them to SPDIF in the hardware setup page. You'll need a special adaptor to go out of the headphone outs of your mac to turnit into digital signal. Check your Mac's manual for that.
Then set up an IAC buss for the midi, inside the AudioMidiSetup software,and tell ProTools to send MTC to this IAC buss, while telling Logic to receive MTC via the same IAC buss. Make SURE you ahve the same exact SMPTE and MTC flavor on both amchnes, and also the right sample rate (match it on both)
Then, set an Aux input in ProTools Le to accept the incoming SPDIF stereo signal from Logic, press play, and they both now synch perfectly.
Cheers

Similar Messages

Pro tools 8 m-powered and logic studio 8

HI gang....newbie here..i want to have the best of both world of daw on my macbook pro laptop...which i just got...here is the question...i want to have both logic studio 8 and pro tools 8 m-powered on the same machine...the question is i heard that pro tools has a digi audio core driver that it installs when u install the program...i know that logic uses and has its own audio core driver..the first question is..which program to install first so there is no conflict...or wont there be a conflict?..i dont want logic to crash if i install pro tools..second question is...how many of u out there have both programs on the same puter and does it conflict with logic?..third question is.are there any concerns i should have with these 2 programs on my laptop..will i have to update anything?..as i said i would like to learn both and have both programs n the same computer..thank u all

Hi bjp1,
I work with both on the same comp, first I worked with Logic and next I've installed ProTools M-Powered and updated PT to PT 8.
I've noticed that there are no conflict and I can work with both at the same time.
My PT works with Lightbridge and Logic with MOTU. You can use M-Audio interface with Logic as well.
Cheers

How to run Crypto Tools for SSO Enabling

Hi Friends,
How to run Crypto tools for SSO enabling. If any body knows please help me...
Thanks

Hi ;
what is the script for windows Environment...

How to run a remote windows dll files and the drivers of the system using j

Dear Friends,
I need some valuable info regd how to run a remote windows dll files and the drivers of the system using java
reply regd thanking you

Please don't make duplicate posts like this.

Since upgrading to OS X Yosemite I can't run pro tools LE

I up graded my i Mac to run on OS X Yosemite 10.10.2.
Since uploading I have discovered that my pro tools LE is not compatible with this new operating system.
How can I address this?
Can I uninstall OS X? If so, how do I uninstall?
Cheers,
Shaughno

Have you checked for an update to the program?
Do a backup, preferably 2 separate ones on 2 separate drives.
Revert to a Previous OS X - Yosemite
Revert to former OS from Mavericks
Revert to Snow Leopard
Revert Yosemite to Mavericks
If you do revert, I'd use Setup Assistant to restore your data. This process takes a while, so do it when you won't need the computer for several hours, based on my experience.

How to run Pro*C application with Instant Client in Oracle 10g

i am try to run but Pro*C application give error orasql10.dll
i have downlod Instant Client in Oracle 10g from site. i have unzip and maked environmental virable in PC.
but application not run. given error orasql10.dll .......
my problem is thrat i want to run Pro*C application with Instant Client in Oracle 10g .....
oracle say that run but how........

According to this thread, it does not work on Windows:
Does Instant Client 10.1.0.4 for Windows 32 support ProC ?

Running Pro Tools and Logic Simultaneously

I've been using Logic and Pro Tools together for a while now. I pretty much only use Logic as a Virtual Synth Rack and records the audio into Pro Tools. I use the CoreAudio of my computer with Logic and plug the output of my computer right into the Digi003 rack that I use for Pro Tools. Recently I started running into an issue where I can't use Pro Tools with any other audio/soft synth program. When I do the secondary program starts to make noise as if a MIDI note is being sent to it. It only happens when I have Pro Tools open. It happens when I open Logic, Garagband, MainStage, and any Standalone VSTs. It's frustrating because I'm not able to use Logic the way I used to. Whatever patch I have open, Pro Tools will force it to start playing a low pitch drone which I haven'tbeen able to stop.
I'm currently using Pro Tools LE 8.0.4 and Logic Pro 9.1.5

Logic makes this easy with a command under the File menu to export regions as files (works with midi tracks, too) and another one to export all tracks as audio files (or similar - not at my Mac now).
Once exported, they're easy to import into Protools. This is easier than OMF, but probably not as complete. At least you don't have to buy Digitranslator to do it this way.

IMac will not run Pro Tools 9 - Some will not run CS5.5 Production Premium and some will?

So i have 6 imacs in my computer lab at this time - I recently created a new image for all of our lab computers using snow leopard OS, Pro Tools 9.0, and Adobe CS5.5 Production Premium - this image works fine on our MacPro's and Pro Tools has no problems opening or CS5.5, but when I imaged the same image onto the imacs - CS5.5 only works on two of the machines and Pro Tools 9.0 will not open on any imac ( i keep getting the message "Can not find playback device: I thought you didnt need one for Pro Tools 9?) and i cant figure out why. The imacs that have problems with CS5.5 and Pro Tools are the 20" early 2006 versions, and the imacs that run CS5.5 but not Pro Tools are 20" late 2006 versions. Are they just too old? Why would it let me image on the late 2006 version of imac but not the early 2006? Do i need to create an image on the imac itself and then farm it out to the others?
Thanks for your comments,
Kyle

I know this is a very late answer for you, but it may help others out.
Try holding down the "N" key on your keyboard while loading the Pro Tools application.
This will eventually open up a dialog box with a drop down menu for selecting your interface.
In the case where you're not using an interface (like the lab), within this dialog box, just select Built-in Output and plug in your headphones in the back of the iMac.
I'm running several rooms with iMacs and PTLE 9.0.6 on Snow Leopard 10.6.8 and this is the only hiccup I've run into. Hopefully, holding down the "N" key works for you.

I use Logic 9.1.3 with Reason/Record and Pro Tools,after updating to Pro tools LE 8.0.5,Logic 9 can't open Rewire application,how is that?

It seams like I got myself into some trouble after updating Pro Tools LE to version 8.0.5, now my Logic 9.1.3 can't open Propellerheads
Reason neither Record in my latest project. Any idea how can I fix it?
Thanx
serbas

Ok I'll check that, Thanks. I'm asking some help from Propellerheads support as well. Hope to find a solution soon...

How to run mapdefinition tool

hi all
could any one plz tell me how do you run mapdefinition tool
thanx in advance

Download beta version of mapdefinition tool from otn site.
double click on mapdef.bat file.
Connect to it using username/password and you will see user interface to create styles, themes and maps.

No sound--- Logic Studio 9.0.2 Pro tools 8.0.1 and apogee DA and AD 16x

I can't get sound out of Digi core audio manager---I can hear it through speaker in computer if I select that option, but I can't get sound from apogees. Spoke with apple and digidesign, ---I can't get it to work. Pro tools works fine---When I look at Digi core audio window the hardware settings window is grey and not accessible. I think I need a window like the I/O window on PT--Does anyone have a remedy or any ideas, or has anyone experienced this-----Mac Pro 2.8 quad intel w 8 gig ram

Hi,
the Digidesign CoreAudio driver supports only the first 8 I/O of your first (main) interface.
You will be able to open the "Digidesign Hardware Setup" from within the "Digidesign CoreAudio Manager", if no application is up and running that is using this CoreAudio driver.
Best,
21th

Pro Tools won't open and strange Warning message

I have been using Pro Tools 11.3 successfully for about a month. I just did an OS X update a week or so ago. I also did a Pro Tools update about a week ago (to 11.3.1). I went to open PT and the app opened, but my top menu never came up. It was just the normal Finder menu, but with my Pro Tools interface open where I could see all the tracks, etc. Clicking to desktop and back to PT several times did nothing.
I closed PT and did a Disk Utility "Repair Permissions". As the repair started up, the progress text gave me the warning below. I'm trying to figure out what it means. If it is a Mac thing or a Pro Tools issue. If someone can help me I would sincerely appreciate it.
<<<<<< Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.>>>>>>>>>>
The repair progress continues with this:
<<<<<<Group differs on “Library/Printers/InstalledPrinters.plist”; should be 80; group is 0.Permissions differ on “Library/Printers/InstalledPrinters.plist”; should be -rw-rw-rw- ; they are -rw-r--r-- .Repaired “Library/Printers/InstalledPrinters.plist”User differs on “private/var/db/displaypolicyd”; should be 0; user is 244.Group differs on “private/var/db/displaypolicyd”; should be 0; group is 244.Repaired “private/var/db/displaypolicyd”>>>>>>>>>>>>
I've never seen this message before and wonder it is part of the problem or signals what the problem is. I have downloaded a few free Pro Tools plugins. If anyone can help, I would sincerely appreciate it.
Thank you,
Leonard

Thanks apostol13,
You need to make SURE the Digidesign Core Audio Manager software, which Logic and iTunes use to "talk" to Digi hardware, is NOT running. if ti IS, turn it off.
Then PT will start up.
Cheers

How to run mass activity for DS 0FC_INVDOC_00 and activate 2710 event

Hi,
I am trying to extract data from DS 0FC_INVDOC_00 it gets me 0 records.I read in the form that to get the records i have to run the Mass Activity type 2620 and for daily processing of invoicing, you have to activate 2710 event.Can anyone please let me know how to do this?
Thanks,

Thanks Denis, I did initialization on Bi side and now trying to extract data (FULL) in rsa3 thats when it gets me 0 records.Is there any other step i need to do to extract records?? According to the postiong in the SDN (Refre to the following link) there are activities which need to be done for getting the data.This where i am stuck.
Re: 0FC_INVDOC_00 FICA Extraction of Invoicing Document Data
Thanks,

How to run Mass Activity for DS 0FC_INVDOC_00 and activate 2710 event in R3

Hi,
I am trying to extract data from DS 0FC_INVDOC_00 it gets me 0 records.I read in the form that to get the records i have to run the Mass Activity type 2620 and for daily processing of invoicing, you have to activate 2710 event.Can anyone please let me know how to do this?
Can anyone please help me on this??
Thanks,

Thanks Denis, I did initialization on Bi side and now trying to extract data (FULL) in rsa3 thats when it gets me 0 records.Is there any other step i need to do to extract records?? According to the postiong in the SDN (Refre to the following link) there are activities which need to be done for getting the data.This where i am stuck.
Re: 0FC_INVDOC_00 FICA Extraction of Invoicing Document Data
Thanks,

Mac Book Pro going to keep up with Logic Studio

I am looking at purchasing a mac book pro 17" and would like to know if it is sufficient for Logic Studio use or if I should budget for a Pro Mac tower configuration.

Simon, I think you should fess up that the comparison here is made gainst a G5 running ProToolsLE, which is the same as filling up a Toyota Corolla's boot (trunk, for those in the other world), with concrete and driving it up the biggest hill you can find... with the air conditioner on.
I have Logic running on a G5 2x2 and a MacbookPro 2.2. Both are comparable with the same sessions, though the screen redraws on the MBPro are a fair bit snappier. The video card would adequately account for that, as the G5's card is 64meg and the MBPro is 128meg and a whole lot newer.. I believe Simons is actually 256meg.
The video performance doesn't effect audio performance at all.

How to run Pro Tools 7.4 LE and Logic Studio 8.0.2, simultaneously..

Similar Messages

Maybe you are looking for