HOW TO RUN S/PDIF from MB To VIDEO CARD

I have a MSI MX8600GT Video card that supports sound over HDMI with a DVI to HDMI adapter if you run sound to the card from the MB. Im using a cable I made which will work but I dont want to mess up anything if I plug it up with the wrong polarity. Will it messs up something or not if it is pluged in backwards on the MB. Can it just be reversed if it does not pass sound? The motherboard is a MSI P6N Diamond. The 2 pin spdif plug does not appear to be Keyed in any way on the MB so as to only be able to be pluged in one way. Do I also have to do anything to tell the MB to output sound to this pin on the MB? Thanks for any help with this in advance.

Really shouldn't be a problem, just ensure '-' (gnd) on the MB and card are matched up and the data likewise and that should be all you need to do. I don't know much about sound settings in your Creative onboard audio but you would need to check if there is something extra you need to do to enable digital output.
It's not powered so shouldn't damage anything, it's simply a ground and data connection.
The connection on the card and MB are keyed if you use the factory supplied cable.

Similar Messages

How to run a report from oracle 10g form in .csv format

dear all,
how to run a report from oracle 10g form in .csv format? i've already run in pdf & excel format.
i'm using
SET_REPORT_OBJECT_PROPERTY (ro_report_id, report_desformat, 'PDF'); --for pdf
SET_REPORT_OBJECT_PROPERTY (ro_report_id, report_desformat, 'SPREADSHEET'); ---for excel
Please Help..

i have already tried.
but the report show in htm or html format. that file will not save into csv. please help.

How to run java program from website?

Hello
I'd like to know how to run java program from my web page.
I'd like to push some button in this web page so java program that would be on my server
would pop-up. Can it be done automaticaly upon running this web site? (without any buttons - I just enter website and program pops up).
Cheers

I rather thought about RMI. But I could try servlets. So how it would look like?.
I would make http request in browser (enter address) and program would show up in its window?. And I would not have to change anything in my program?. This program would run then on both boxes?. One remotely and one not?.
But I would have to learn some basics, I've never worked with servlets. Could you suggest some good sites about it?. With ready examples so I could tweak them to my purpose.
Message was edited by:
macmacmac

How to run ZAC CDP from a Linux Bundle

Hi all,
I am trying to work out how to run "ZAC CDP" from a Linux bundle. We have 330 Satelites that I need to force the replication of the TFTP folder too in one staggered process.
Is there any reason why this would not work? would a script do it and anyone have a sample?
cheers,
Trev.

I would imagine it's possible.
I'm assuming something (run as root user?)
#!/bin/bash
zac cdp
(you may have to put the absolute path in for the location of "zac")
I'm not a linux guru by any means, just that if you can script this via a cron job, I'm sure it can be done via ZCM Bundle.

How to run db.xml from ORPOS 13.4 version on standalone

Hi All,
How to run db.xml from ORPOS 13.4, We dont have ORBO.
Thanks & Regards
GM

Go to the location where your installer is residing and execute the following command:
install.cmd ant install-database
Regards,
Uttam Kumar

How to run batch file from oracle forms 9i

Hi everyone.
i have a data in csv file. i want to upload it to my database. i am using sql loader for it.
i have made a batch file which run the sql loader and transfer my data to database.
How to run batch file from oracle forms 9i.
when i press the button, nothing uploads in my database. (when i simply run the batch file it works).
here is my code
Begin
HOST('C:\temp\batchfile.bat');
message('done');
end;
Thanks in advance
regards
sajid

this is my log file, when i run manually.
SQL*Loader: Release 10.2.0.1.0 - Production on Thu Jul 1 23:27:53 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Control File: file_to_upload.ctl
There are 2 data files:
Data File: sk.csv
Bad File: sk.bad
Discard File: none specified
(Allow all discards)
Data File: sk1.csv
Bad File: sk1.bad
Discard File: none specified
(Allow all discards)
Number to load: ALL
Number to skip: 0
Errors allowed: 50
Bind array: 64 rows, maximum of 256000 bytes
Continuation: none specified
Path used: Conventional
Table KHAN, loaded from every logical record.
Insert option in effect for this table: APPEND
Column Name Position Len Term Encl Datatype
SR FIRST * , O(") CHARACTER
DATES NEXT * , O(") CHARACTER
AGENT NEXT * , O(") CHARACTER
COUNTRY NEXT * , O(") CHARACTER
TRANSACTIONS NEXT * , O(") CHARACTER
PKR NEXT * , O(") CHARACTER
USD NEXT * , O(") CHARACTER
BANK NEXT * , O(") CHARACTER
Table KHAN:
11088 Rows successfully loaded.
0 Rows not loaded due to data errors.
0 Rows not loaded because all WHEN clauses were failed.
0 Rows not loaded because all fields were null.
Space allocated for bind array: 132096 bytes(64 rows)
Read buffer bytes: 1048576
Total logical records skipped: 0
Total logical records read: 11088
Total logical records rejected: 0
Total logical records discarded: 0
Run began on Thu Jul 01 23:27:53 2010
Run ended on Thu Jul 01 23:27:54 2010
Elapsed time was: 00:00:00.63
CPU time was: 00:00:00.17

How do run my library from an external drive?

How do run my library from an external drive? I've tried changing destination locations but nothing seems to work. help please

You might find this article useful, there's a section in it on moving to an external drive:
iLounge - Transferring your iTunes Library to Another Drive

Imovie 09 How do I stop Imovie from auto importing video from iphoto

Imovie 09 How do I stop Imovie from auto importing video from iphoto.
Hi I've done a lot of searches on how to do this but no answers found.
Imovie is beginning to become really slow because of the large number of video's. It takes 3 minutes to startup. Editing is sometimes slow lot's of spinning beach balls e.t.c.
I would like to only import the video I want to edit and hopefully get a quicker Imovie in the process.
My Iphoto library is about 95 Gbyte in size.
My mac has 4 gb ram and I use the internal disk.
Any other ways to work with Imovie/Iphoto are also welcome.
regards

I won't get iMovie 9 till Tuesday, but based on what you said I may need to take some precautions. One reason I didn't like iMovie 8 is because it automatically imported everything in iPhoto library. What I'm going to do is create a new iPhoto library before importing the photos/videos from the camera. Or if you already have it in your main iPhoto library copy only the photos you'll use in your iMovie 9 project to the new library. Then start iPhoto while pressing the option key which will allow you to select the new iPhoto library you have created. Then I suppose that when you start iMovie 9 it will automatically import only the photos/videos from the new library.

How do I route audio from a YouTube video to AU Lab using SoundFlower so that I can capture the YouTube video's sound stream?

How do I route audio from a YouTube video to AU Lab using SoundFlower so that I can capture the YouTube video's sound stream?

Attach camera via USB or put card in card reader.
Go to FCP, and go to the Log and TRANSFER window.
If FCP recognizes the card, you will see your clips listed on the left.
You can view them, set Ins and Outs, and import just what you want.
Once you choose a section of video and import it, FCP converts (transcodes) from its original camera format to Apple ProRes422 - a more edit friendly video file.

How do I download pictures from my old sims card?

How do I download pictures from my old sims card?

You don't.
What pics are on your SIM card?
Iphone does not store to the SIM card.
You can import contacts from a SIM card ( if youor old phone stored to SIM).

How to run a report from WCF

hi,
I am trying to run a report from a WCF service application, and then render it in PDF Format to a caller WPF application. But I cant get it! In more detail, this is what my app should do
1. from WPF, call a web service procedure, pass a report name, report path and parameters. Report is store at the same server where Web Service is installed
2. WCF procedure loads report, set parameters, retrieve data from DB and renders it as an array of bytes
3. WPF gets the array, save it into a PDF file, then open it.
this is the code of the WCF procedure.
    Function DownloadCRReport(codEnte As String, connString As String, reportDir As String, reportName As String, Parameters As Dictionary(Of String, Object)) As Byte() Implements IGesiService.DownloadCRReport
        Try
            Dim bytes As Byte()
            Dim infile As BinaryReader
            Dim fs As FileStream
            Dim rep As New ReportDocument
            Dim RepAddress As String
            logPath = reportDir & "log\"
            sb = New StringBuilder()
            timestamp = Now.Year.ToString & Now.Month.ToString & Now.Day.ToString & Now.Hour.ToString & Now.Minute.ToString & Now.Second.ToString
            logFileName = timestamp & "_" & reportName & ".txt"
            logFile = New StreamWriter(logPath & logFileName, FileMode.CreateNew)
            logFile.WriteLine("----
Date and time: " & Now.ToString & " -
            If My.Computer.FileSystem.FileExists(reportDir & reportName & ".rpt") = False Then
                Throw New Exception("file RPT non found in: " & reportDir)
            End If
            RepAddress = reportDir & reportName & ".rpt"
            logFile.WriteLine("rep address: " & RepAddress)
            rep.Load(RepAddress, OpenReportMethod.OpenReportByDefault)
            logFile.WriteLine("load rep")
            If rep.DataSourceConnections.Count > 0 Then
                rep.DataSourceConnections.Item(0).SetLogon("usr", "pwd")
                logFile.WriteLine("data source connection")
            End If
            For Each i In Parameters
                rep.SetParameterValue(i.Key, i.Value)
                logFile.WriteLine("param: " & i.Key & " - " & i.Value)
            Next
            Try
                fs = rep.ExportToStream(ExportFormatType.PortableDocFormat)
                logFile.WriteLine("export to stream")
                infile = New BinaryReader(fs)
                logFile.WriteLine("created binaryreader")
                bytes = infile.ReadBytes(CInt(fs.Length))
                logFile.WriteLine("render pdf. fine")
                logFile.Close()
                Return bytes
            Catch ex As Exception
                logFile.WriteLine("vbCrLf & ex.Message & vbCrLf & ex.InnerException.Message)
                logFile.Close()
                Return Nothing
            End Try
        Catch ex As Exception
            logFile.WriteLine("vbCrLf & ex.Message & "-" & vbCrLf & ex.InnerException.Message)
            logFile.Close()
            Return Nothing
        End Try
    End Function
I detected that error occurs on rep.ExportToStream(ExportFormatType.PortableDocFormat). I should point out that the same procedure works under WPF application. In the WCF server I installed CR Runtime engine for .NET framework (13.0.9.1312) and CR version for Microsoft Visual Studio (same version). Moreover, all DB operations are stored into the report, so I should not pass any dataset, just parameters.
Anyway, just to begin, I tried to call a simple report with just two string parameters and no queries, but I alwais get error ("An exception of type 'System.NullReferenceException' occurred in MyApp... Object reference not set to an instance of an object)!
How can I make it work? thanks for help

hi Ludek,
Im trying to change DB connection info at runtime for all of the report tables. this is the code I used in my Web Service
          Function DownloadCRReport(...)
If rep.DataSourceConnections.Count > 0 Then
   Dim conn As New ConnectionInfo
   Dim tabLogon As TableLogOnInfo
   conn.ServerName = "10.10.15.90" 'IP address of DB server
   conn.DatabaseName = "MyDB"   'Database name as set in TNSNAMES.ORA
   conn.UserID = "newuser"
   conn.Password = "newpwd"
   For Each t As Table In rep.Database.Tables
      tabLogon = t.LogOnInfo
      tabLogon.ConnectionInfo = conn
      t.ApplyLogOnInfo(tabLogon)
      logFile.WriteLine("changed logon tab. " & t.Name)
   Next
   rep.Refresh()
   logFile.WriteLine("changed data source connection")
End If
'set parameters
If Not IsNothing(Parameters) Then
   For Each i In Parameters
      rep.SetParameterValue(i.Key, i.Value)
      logFile.WriteLine("set parameter" & i.Key & " - " & i.Value)
   Next
End If
fs = rep.ExportToStream(ExportFormatType.PortableDocFormat)
          End Function
that comes to an error on rep.ExportToStream: "Unable to access database".
Running web service in debug mode, I noticed that, after t.ApplyLogonInfo(tabLogon), the new ConnectionInfo has "password" property empty. Maybe this could cause the error, or is there some mistake in the new connectioninfo?

How to run an executable from command-line

I'm learning how to use the Terminal and I got stuck in a silly thing (I suppose it is). How can I run an executable file from command-line in Terminal?
For example: I have a file named "Hello" in the folder /sample. If I use the ls command (ls sample), I can see the file Hello. Then I move to the directory (cd /sample) and try to run the file Hello (typing "Hello") but I got "command not found" message.
If I drag the Hello file from Finder to Terminal and hit Return, it runs perfectly. And if I type the full path to the file (even if I'm already inside its directory), it also runs.
So, my doubt is if there is any command to run an executable from command-line.
Thanks

KJK555 wrote:
Hi VK:
Can you enlighten me on why it's neccessary to do the "./" thingy in OS X when in unix/linux
I never had to resort to doing that?
Kj
I took the trouble of reading *man bash* and it explains the issue. to add the current directory to PATH you need to add an empty path to PATH like this
PATH=$PATH::
you can add it to ~/.bash_profile so that it's executed automatically when you start bash. I suspect the linux system you are talking about had this set up by default or had it added to PATH in /etc/profile which defines PATH globally.

How to run .html file from .java file..?

Hi All,
I was just trying as mentioned in the subject of how to run an html file from a java file.We have runtime class which inturn is having exec method which returns process but it supports only .exe as an argument .Is there any way to do this???
Thanks in advance.

viswa07 wrote:
You mean to say Desktop class in java...???I'm so sorry, I thought you knew enough Java to look up the API.
[This link|http://java.sun.com/docs/books/tutorial/getStarted/cupojava/index.html] might be more at your level.
db

How to run the JNLP from Command Line

Hi All,
how to run the JNLP file from the remote machine from our command line. I have requirement to run this JNLP file in java 1.4.2 version. Can any one tell me the procedure or the steps that are needed to run this file at command prompt.
Regards,
Prasanna.
Edited by: VPrasanna on May 19, 2008 4:43 AM

>
I am getting "**java.security.AccessControlException: access denied (java.net.SocketPermission wwwgate0.mot.com:1080 connect,resolve)**" when I start the Web Start Client. >This seems like a largely separate problem to running the JNLP from the command line. It might have been better to end this thread (assign the dukes) and start a new one.
>
..Can you help me in resolving this issue. >However, I suspect I can guess the problem.
If this app. is normally hosted on wwwgate0.mot.com then it can 'phone home' to the server without further permission, but if you are running it from the command line, that might not be the codebase anymore.
If you wish to do 'local testing' of such an app., I would recommend setting up a server like Tomcat on the local machine, and serving the test app. directly off that.
>
..Its urgent...>Sun offers a number of options for urgent matters, such as support tickets. Perhaps you should look into one of those.

How to run two applications from same application server

hi,
i am working on oracle application server 10g , is it possible to run 2 applications from one application server by using different url ? but same report server name .
if i can do so plz tell me how ?
regards

hi,
offcourse,you can do this you.you can deploy n no of applications on a single application server.
and even you can run all the reports on a single report server
to the below location.
$ORACLE_HOME/forms/server
create a new enviroment file(for eg fd.env) using the default.env as follows and make the following FORM_PATH and REPORTS_PATH changes in the fd.env
FORMS_PATH=/oraApp/Ora_bi/forms:/oraApp/backup_29_11_2010_0.12/fd/pll:/oraApp/backup_29_11_2010_0.12/fd/forms
REPORTS_PATH=/oraApp/backup_29_11_2010_0.12/fd/reports
similarily create another env file (eg appr.env) and make the above changes in it.
Now make the following changes in formsweb.cfg
for example:
[xyz]
envFile=appr.env(env file name)
form=xyz.fmx(your start form)
lookandfeel=oracle
separateFrame=false
userid=appraisal/[email protected]
splashscreen=NO
logo=NO
background=NO
color=automatic
render=yes
archive=frmall.jar
archive_jini=frmall_jinit.jar,frmwebutil.jar,jacob.jar,ofasIcons.jar,icons.jar,OfasPrint.jar,newicons.jar(these jar file are the images files of your applications..needs to be stored in $ORACLE_HOME/forms/java.
imagebase=codebase
term=frmpcweb.res
baseHTML=webutilbase.htm
baseHTMLjinitiator=webutiljini.htm
baseHTMLjpi=webutiljpi.htm
WebUtilArchive=frmwebutil.jar,jacob.jar
[fd]
envFile=fd.env
form=fd.fmx
lookandfeel=oracle
separateFrame=true
userid=fdmmfsl/fdmmfsl@mmfdlive
splashscreen=NO
logo=NO
background=NO
color=automatic
render=yes
archive=frmall.jar
archive_jini=frmall_jinit.jar,frmwebutil.jar,jacob.jar,icons.jar
imagebase=codebase
term=frmpcweb.res
baseHTML=webutilbase.htm
baseHTMLjinitiator=webutiljini.htm
This depends on your application which your deploying
now for about accessing the seperate application then
use as follows
1st application
http://ip address:7778/forms/frmservlet?config=xyz
2nd application
http://ip address:7778/forms/frmservlet?config=fd
you can even deploy 2 war files on one application server...and you can even make these 2 war files to access the same report server
If you require any other help then do let me know
Regards
Fabian D'souza

HOW TO RUN S/PDIF from MB To VIDEO CARD

Similar Messages

Maybe you are looking for