How to run selected sequences/steps after the great-grandparent, the grandparent and the parent sequence ?
Hi,
I developped a sequence file with many levels of interlinked subsequences, and I want to be able to run selected subsequences/steps after the great-grandparent, the grandparent and the parent sequence.
Anyone know the best method to do this ?
Indeed, there was an little error in the sequence file. You can find the corrected file in attachment.
Run the selected step "Grandparent 2" doesn't do what I require because this run all sequences under "Grandparent 2", while I want to run "Parent 2.2" and "Child 2.2.2" under "Grandparent 2".
Attachments:
sample.seq 10 KB
Similar Messages
-
After taking a pix with my iPhone, it shows up in my Album. But when I select it to look at it or forward it, it disappears and the screen is blank. This doesn't happen with all of my pictures. I have the camera set on photo, with HDR off. How do I keep this from happening?
Not sure if this helps you, but I had the same issue. I inadvertently must have chosen a filter instead of none. Once I went and fixed this, my pictures were in my roll and I could see them. Hope this helps. I think you should be able to pick a filter and take a picture, but it worked for my phone.
-
How do i change my creative cloud id,as my adobe id is different and the signed in id is different?
how do i change my creative cloud id,as my adobe id is different and the signed in id is different?
Unfortunately, only Adobe customer service can assist you with your issue. These are user forums; you are not addressing Adobe here.
Click on the link below, and after that click on "Still need Help? Contact us."
Then on the next page, click Chat.
There is also a phone option. 1 (800) 833-6687
There's also a dedicated user forum at:
http://helpx.adobe.com/contact.html?step=PHXS_downloading-installing-setting-up_licensing- activation -
How do i fixed my problem with my ipad apps every time i open that apps it takes 10min. to play the games ant its getting LOST MODE and the ipad system is crashing
We are fellow users here on these user-to-user forums, you're not talking to iTunes Support nor Apple.
Have you tried closing all apps via the iPad's multitasking bar and then doing a soft-reset and seeing that helps ? To close all apps :
iOS 7: double-click the home button to open the taskbar, and then swipe or drag each app's screen from there up and off the top of the screen to close it, and click the home button to close the taskbar.
iOS 6 and below : from the home screen (i.e. not with any app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of each app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
Soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
How can I get a file to copy all of the files in a directory except itself and the source of the copy function will be the directory the final program is in? This application must be in Lab View 8.
you mean something like this (see below)?
Now you may have to implement code to check if the destination folder exists and to create it, etc. But if you use the Front Panel Control to select the destination folder, it should be okay.
Not the best implementation, mind you but you'll get the idea..
Message Edited by JoeLabView on 04-18-2007 03:43 PM
Attachments:
copy folder contents.PNG 10 KB -
Hello,
The resource filled his/her timesheet in PWA.
Now :
What are the differences between Turn in Final Timesheet
and the other option: Send Progress for Selected Tasks?
ThanksYou are partially correct and partially wrong.
Turn
in Final Timesheet sends
the timesheet to the Timesheet Manager for Approval
but task update always goes to Status manger of the task. Taks manager you can see in MPP(insert status manager field then check)
Yes
after approval progress will be available in MPP as well as in Projectweb app as % complete .
Send
Progress for Selected Tasks
Send progress of selected task to status manager after approval update will be available in both MPP and Projectweb
app as % complete.
In Send
Progress for Selected Tasks Timesheet
Manager doesn't receive anything in his Approval center
because all the update directly go to Status manager Approval center.
Here you have to understand
that there are two role Timesheet Manager(for timesheet approval) and Status manager(for task
actual approval)
kirtesh -
I go through the process of burning a DVD from a Premier Pro Project and at the end of the process I get an encoding error and the dvd does not start burning. How do I fix this?
adam@honestmusky wrote:
Yes I am using encore. I used to have no problem doing this, but I had to get a new computer and now something isn't working right.
How about some DETAILS?
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
Also describe the EXACT steps you take to go from Premiere Pro to Encore -
My screen freezes after a few seconds on my iphone 5c and the display fades slightly so you can see faint lines in the background. I'm not sure whether this is easily fixable or a major problem. Have reset the device, but this has worked. Any ideas?
To make sure that this is not software related, set it up as new device, explained in this article:
How to erase your iOS device and then set it up as a new device or restore it from backups -
after update.. i can not start the ipad, when i press agree in the terms ...it will freeze and the screen not working///help please
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
Cheers, Tom -
My Time Capsule has been backing up without any problems and all of a sudden it stops reading on my computer. The external hard drive beeps three times and the motter wont run within. The light that usually blinks while in use is no longer blinking and is on constant. What happened?
abailey46 wrote:
My Time Capsule has been backing up without any problems and all of a sudden it stops reading on my computer. The external hard drive beeps three times and the motter wont run within. The light that usually blinks while in use is no longer blinking and is on constant. What happened?
Sorry we are unclear as to the external hard drive and its connection to the TC..
For instance the light that blinks.. is that the TC or external hard disk or what.
Did you try just rebooting / restart the whole network in correct order.. modem.. router / TC.. external drive.. clients with 2min gap between each.
Are you actually running Snow Leopard as the profile states?
How old is the TC? -
When running an xml publisher report the xml output leads to 9 mb and the excel output file leads to 20 mb. The records contained in excel file is 4000 records. When taking the excel records and copy to new excel file the excel file size is 3.5 mb only.Why does the oracle software generates 20mb file?
Does any one knows the answer please advice?Hello,
This issue is because the Excel output from BI Publisher is MHTML (XML Publisher generates XHTML) not binary .xls.
MHTML and XHTML are more verbose formats than binary .xls.
It will be large because the current Excel output is just an HTML and not compressed like PDF. Please use the workaround (save it as .xls file). This is a known limitation of RTF layout templates.
BI Publisher Enterprise has a new feature True Excel Templates. The layouts generate binary Excel output.
Excel Output File Size Generated By BI Publisher is Very Large (Doc ID 760437.1)
Bogdan -
Wheb I try to update iTune I am getting a message "the site has not a valid signature" and the downloading is stopped. How can I fix IT?
I am using windows 7 64That suggests that the installer is getting damaged during the download.
I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer? -
i downgrad my iphone from ios5 to ios 4.3.3 and after restoring the ios 4.3.3 i fixed all itunes error but after that my i phone screen turned off and the apple logo didnt shows up any more what ever i did my iphone model 4 gsm and fyi i try all the ways to turn it on but it didnt sucsses
roaminggnome
thanks for helping but i didnt know that is the downgrade is forbidden and i ask for help and u didnt help me so i just want to thank u for telling me that is the downgrade is forbidden >>> but now i didnt have i phone any more so thank u so much again >>>> -
I've had my farm upgraded from SP2010 to SP2013 for over 6 months now and all is well, however, I was refreshing my staging environment from production and I noticed that one of the databases still shows these errors when I run test-spcontentdatabase:
Category : Configuration
Error : False
UpgradeBlocking : False
Message : The [SharePoint Web App] web application is configured with claims authentication mode however the content database you are trying to attach is intended to be used against
a windows classic authentication mode.
Remedy : There is an inconsistency between the authentication mode of target web application and the source web application. Ensure that the authentication mode setting in upgraded web application is the
same as what you had in previous SharePoint 2010 web application. Refer to the link "http://go.microsoft.com/fwlink/?LinkId=236865" for more information.
This doesn't make sense considering I converted the production web application to claims during the upgrade and then verified all sites were working with claims logins. I also verified that existing AD user identities were converted to claims by checking out
the database tables. Yet test-spcontentdatabase still thinks there is a mismatch here.
My farm is SP1 and no further CUs. The point of this particular refresh is so I can update to the November CUs in my test farm. Anyone else see this? Seems like it's a bug/safe to ignore because my stuff is working.
Thanks,
AaronSee:
http://thesharepointfarm.com/2014/11/test-spcontentdatabase-classic-to-claims-conversion/
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
after updating to iPhoto9.6 an error occurred and the iPhoto icon says it is downloading. The library seems ok
Perhaps you need to wait for the download to finish. If it's going on for a long time then cancel it (which you can do in Launchpad) and try again.
Maybe you are looking for
-
Why is it impossible to see an appointment "time" in ical/maverick OS on macbook air?
Why is it impossible to see an appointment "time" in ical/maverick? How could this be a good thing when looking at appointments at a glance in day view and you come to a screeching stop because the TIME is invisible, while in month view time isn't t
-
Scale values in Sales Rebate Agreements
Hi All We are trying to set up rebate agreement reporting for our client. They use both Purchase related rebates (MEB1) and Sales rebates(VBO1). In the purchase related rebate screen(MEB3) -> Business volume data allows a drill down into scale income
-
Ever since I installed Tiger on this computer, I am unable to FTP files to my ISP. I have tried various client software solutions (Dreamweaver, Fetch, Bullet Proof). They all act like the connection times out before the file is uploaded. I am able to
-
Hi I have an Intel-based Mac, it has Mac OS X 10.5.8 Leopard, but I want to install Mac OS X 10.6 Snow Leopard, or if it is possible directly to Mac OS X 10.10 Yosemite, my Mac is compatible with Yosemite, but how can I update to Mac OS X 10.6 or 10.
-
Ipod not showing in itunes or computer
What can I do to get my ipod shuffle to be recognized...Re-installing works when I first do it and then when I go into my library to check off some songs and back to look for my ipod--it is gone again!!