How to run swf's using Proscenium

I've followed the directions and downloaded Flash Builder along with the sample code. I've been able to compile the applications to swf files, however I can't get them to run. The instructions say to download the player from http://www.adobe.com/support/flashplayer/downloads.html however, those are all 10.x, and when using the Desktop player I get errors about not being able to call native functions, and when I try running in a browser with Flash Player 11 the movie does not load or run.
I'm using Windows 7 64-Bit.
What is the minimum player version required to run the demo's, and is there a Flash 11 Debug Desktop Player that can be used instead of running thru a browser?
The exact error I'm getting in the Desktop Player is:
"VerifyError: Error #1079: Native methods are not allowed in loaded code."
In a web browser with Flash Player 10.x or 11.x when I right-click I get:
"Movie not loaded..."

I'm attempting this process and noticed a couple things. Where you say "Flex Compiler" pane, for me it shows up as "ActionScript Compiler" pane, and the "-target-player=11" was already set, and I got an error when I added it again, and so removed that one and just left the one already there. Also when I tried using another specific sdk, I got an error that other arguments where unvalid, and so I specified Flex 4.5 as the other version hit apply, and then went back to 4.5.1 and said ok and everything seemed fine. Then I went to clean the project and got a bunch of errors, all the same error...
Description
Resource
Path
Location
Type
configuration variable 'compiler.library-path' value contains unknown token 'PLAYERGLOBAL'
ProsceniumTutorials
Unknown
Flex Problem
So now I'm trying to figure out if I need to add that back in.
...Just fiddled with this some more and found that some of the settings seem to still require closing/opening Flash Builder?
Select the "Flex Compiler" pane.
In the "Additional Compiler Arguments" text box add:
-target-player=11
To refresh the entire contents of the Flex SDK components choose "Use a specfic SDK" and then switch to a different SDK than 4.5.1 and click the "Apply Button"
then switch it back to 4.5.1 in that combo box, or to "Use Default SDK" if your default is 4.5.1
Click "OK"
P.S. This would be a WHOLE lot easier if there was 4.5.2 version of the Flash Builder that installed with the Flash 11 player, etc, etc.
Also why aren't there instructions and sample FLA's for using proscenium with Flash Professional?

Similar Messages

Urgent - How to Run a FM using CATT script tool,

Hi All,
How to Run a FM using CATT script tool,
Thanks in advance,
KSR

choose type as "Function module test" (if you are in release less than 6.4 abap) after entering into t.code SCAT.
Pl. refer to this documentation for creating function module test cases
<a href="http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCATTOL/CACATTOL.pdf">http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCATTOL/CACATTOL.pdf</a>
reward if it helps
Krishna

How to run the job using DBMS_SCHEDULER

How to run the job using DBMS_SCHEDULER
pleas give some sample Iam very new to DBMS_SCHEDULER

Hi
DBMS_SCHEDULER
In Oracle 10g the DBMS_JOB package is replaced by the DBMS_SCHEDULER package. The DBMS_JOB package is now depricated and in Oracle 10g it's only provided for backward compatibility. From Oracle 10g the DBMS_JOB package should not be used any more, because is could not exist in a future version of Oracle.
With DBMS_SCHEDULER Oracle procedures and functions can be executed. Also binary and shell-scripts can be scheduled.
Rights
If you have DBA rights you can do all the scheduling. For administering job scheduling you need the privileges belonging to the SCHEDULER_ADMIN role. To create and run jobs in your own schedule you need the 'CREATE JOB' privilege.
With DBMS_JOB you needed to set an initialization parameter to start a job coordinator background process. With Oracle 10g DBMS_SCHEDULER this is not needed any more.
If you want to user resource plans and/or consumer groups you need to set a system parameter:
ALTER SYSTEM SET RESOURCE_LIMIT = TRUE;
Baisc Parts: Job
A job instructs the scheduler to run a specific program at a specific time on a specific date.
Programs
A program contains the code (or reference to the code ) that needs to be run to accomplish a task. It also contains parameters that should be passed to the program at runtime. And it?s an independent object that can referenced by many jobs
Schedules
A schedule contains a start date, an optional end date, and repeat interval with these elements; an execution schedule can be calculated.
Windows
A window identifies a recurring block of time during which a specific resource plan should be enabled to govern resource allocation for the database.
Job groups
A job group is a logical method of classifying jobs with similar characteristics.
Window groups
A window groups is a logical method of grouping windows. They simplify the management of windows by allowing the members of the group to be manipulated as one object. Unlike job groups, window groups don?t set default characteristics for windows that belong to the group.
Using Job Scheduler
SQL> drop table emp;
SQL> Create table emp (eno int, esal int);
SQL > begin
dbms_scheduler.create_job (
job_name => 'test_abc',
job_type => 'PLSQL_BLOCK',
job_action => 'update emp set esal=esal*10 ;',
start_date => SYSDATE,
repeat_interval => 'FREQ=DAILY; INTERVAL=10',
comments => 'Iam tesing scheduler');
end;
PL/SQL procedure successfully completed.
Verification
To verify that job was created, the DBA | ALL | USER_SCHEDULER_JOBS view can be queried.
SQL> select job_name,enabled,run_count from user_scheduler_jobs;
JOB_NAME ENABL RUN_COUNT
TEST_abc FALSE 0
Note :
As you can see from the results, the job was indeed created, but is not enabled because the ENABLE attribute was not explicitly set in the CREATE_JOB procedure.
Run your job
SQL> begin
2 dbms_scheduler.run_job('TEST_abc',TRUE);
3* end;
SQL> /
PL/SQL procedure successfully completed.
SQL> select job_name,enabled,run_count from user_scheduler_jobs;
JOB_NAME ENABL RUN_COUNT
TEST_ABC FALSE 0
Copying Jobs
SQL> begin
2 dbms_scheduler.copy_job('TEST_ABC','NEW_TEST_ABC');
3 END;
4 /
PL/SQL procedure successfully completed. Hope it will help you upto some level..!!
Regards
K

How to run an Applet using the JDK1.3.1 platform?

I'm a beginner of Java Applet.
I've type in the sample program provided in the text book, and compiled it using the jdk1.3.1 platform.
Usually we run a java program using java [filename], right?
How about running an applet file?
What is appletviewer function?
Thanks!

I try to put it in a HTML page but it required me to download a Java Virtual Machine.
I've been searching sources for that but stil cannot get.
This is always what I get:
[We're sorry, you cannot view this page because it requires the Microsoft Java Virtual Machine (MSJVM). Your machine does not have the MSJVM installed. For more information please visit www.microsoft.com/java.]
I visit java.sun.com. On the right side of the page listed with the HOT DOWNLOADS.
I click on the Java VM but still cannot get anything...
Can u help me on that?
I've been trying for 2 days already.
Thanks!

How to run Excel Macros using JDBC-ODBC

Hi,
I want to run the excel macros in the excel file, after I connected to excel file, using JDBC-ODBC bridge.
How macros treated here?
Help needed please..........
- Ramesh

How to run Excel Macros using JDBC-ODBCYou don't.
As my fuzzy understanding goes.....
Macros (excel, word, etc) run via a "OLE" extension of the script host system.
So the only way to run them is via the OLE interface. That has nothing to do with ODBC. You can write your own JNI to do that, or you might get lucky and find that someone else has written a java library to do it for you.

How to run an applescript using unix command

Hi All,
Can any one help me in giving me the command for running an apple script thru postupgrade shell file in other words i wana run an apple script while running my new installer that will upgrade the old version of application but while installing i want to run an applescript so as i know ill have to give that applescript path in the postupgrade script but how to run it while installation and where to keep it (is it postupgrade). May be in short how can i run apple script thru unix command.

Use the osascript command.
In my installer, I use the DropDMG program to build my DMG disk image. It doesn't quit automatically, so I have to do the following:
osascript -e "tell application \"DropDMG\" to quit"
Type "man osascript" for more information.

How to run servlet by using main?

How can I use main to run servlet?
I cannot put request and response object into doGet(request, response) method
I want this because I want to run this servlet daily and I plan to put it in cron job
Calvin

Hi
Perhaps you cannot run servlet without using browser. But you can make that program as an application in order to run in Dos or Unix shell.
But still you can run servlet without using browser How?
You can debug servlets with the same jdb commands you use to debug an applet or an application. The JavaTM Servlet Development Kit (JSDK) provides a standalone program
called servletrunner that lets you run a servlet without a web browser. On most systems, this program simply runs the java sun.servlet.http.HttpServer command. You
can, therefore, start a jdb session with the HttpServer class.
A key point to remember when debugging servlets is that Java Web server and servletrunner achieve servlet loading and unloading by not including the servlets directory on
the CLASSPATH. This means the servlets are loaded using a custom classloader and not the default system classloader.
Running servletrunner in Debug Mode
Running Java Web ServerTM in Debug Mode
Running servletrunner in Debug Mode
In this example, the servlets examples directory is included on the CLASSPATH. You can configure the CLASSPATH for debug mode as follows:
Unix
$ export CLASSPATH=./lib/jsdk.jar:./examples:$CLASSPATH
Windows
$ set CLASSPATH=lib\jsdk.jar;examples;%classpath%
To start the servletrunner program you can either run the supplied startup script called servletrunner or just supply the servletrunner classes as a parameter to jdb. This
example uses the parameter to servletrunner.
$ jdb sun.servlet.http.HttpServer
Initializing jdb...
0xee2fa2f8:class(sun.servlet.http.HttpServer)
> stop in SnoopServlet.doGet
Breakpoint set in SnoopServlet.doGet
> run
run sun.servlet.http.HttpServer
running ...
main[1] servletrunner starting with settings:
port = 8080
backlog = 50
max handlers = 100
timeout = 5000
servlet dir = ./examples
document dir = ./examples
servlet propfile = ./examples/servlet.properties
To run SnoopServlet in debug mode, enter the following URL in a browser where yourmachine is the machine where you started servlet runner and 8080 is the port number
displayed in the settings output.
http://yourmachine:8080/servlet/SnoopServlet
In this example jdb stops at the first line of the servlet's doGet method. The browser will wait for a response from your servlet until a timeout is reached.
main[1] SnoopServlet: init
Breakpoint hit: SnoopServlet.doGet (SnoopServlet:45)
Thread-105[1]
We can use the list command to work out where jdb has stopped in the source.
Thread-105[1] list
41 throws ServletException, IOException
42 {
43 PrintWriter out;
44
45 => res.setContentType("text/html");
46 out = res.getWriter ();
47
48 out.println("<html>");
49 out.println("<head>
<title>Snoop Servlet
</title></head>");
Thread-105[1]
The servlet can continue using the cont command.
Thread-105[1] cont
Running Java Web Server in Debug Mode
The JSDK release does not contain classes available in the Java Web server and it also has its own special servlet configuration. If you cannot run your servlet from
servletrunner, then the other option is to run the Java Web server in debug mode.
To do this add the -debug flag for the first parameter after the java program. For example in the script bin/js change the JAVA line to look like the following. In releases prior
to the Java 2 platform release, you will also need to change the program pointed to by the variable $JAVA to java_g instead of java.
Before:
exec $JAVA $THREADS $JITCOMPILER $COMPILER $MS $MX \
After:
exec $JAVA -debug $THREADS $JITCOMPILER
$COMPILER $MS $MX \
Here is how to remotely connect to the Java Web Server. The agent password is generated on the standard output from the Java Web Server so it can be redirected into a file
somewhere. You can find out where by checking the Java Web Server startup scripts.
jdb -host localhost -password <the agent password>
The servlets are loaded by a separate classloader if they are contained in the servlets directory, which is not on the CLASSPATH used when starting the Java Web server.
Unfortunately, when debugging remotely with jdb, you cannot control the custom classloader and request it to load the servlet, so you have to either include the servlets
directory on the CLASSPATH for debugging or load the servlet by requesting it through a web browser and then placing a breakpoint once the servlet has run.
In this next example, the jdc.WebServer.PasswordServlet is included on the CLASSPATH when Java Web server starts. The example sets a breakpoint to stop in the service
method of this servlet, which is the main processing method of this servlet.
The Java Web Server standard output produces this message, which lets you proceed with the remote jdb session:
Agent password=3yg23k
$ jdb -host localhost -password 3yg23k
Initializing jdb...
> stop in jdc.WebServer.PasswordServlet:service
Breakpoint set in jdc.WebServer.PasswordServlet.service
> stop
Current breakpoints set:
jdc.WebServer.PasswordServlet:111
The second stop lists the current breakpoints in this session and shows the line number where the breakpoint is set. You can now call the servlet through your HTML page. In
this example, the servlet is run as a POST operation
<FORM METHOD="post" action="/servlet/PasswordServlet">
<INPUT TYPE=TEXT SIZE=15 Name="user" Value="">
<INPUT TYPE=SUBMIT Name="Submit" Value="Submit">
</FORM>
You get control of the Java Web Server thread when the breakpoint is reached, and you can continue debugging using the same techniques as used in the Remote Debugging
section.
Breakpoint hit: jdc.WebServer.PasswordServlet.service
(PasswordServlet:111) webpageservice Handler[1] where
[1] jdc.WebServer.PasswordServlet.service
(PasswordServlet:111)
[2] javax.servlet.http.HttpServlet.service
(HttpServlet:588)
[3] com.sun.server.ServletState.callService
(ServletState:204)
[4] com.sun.server.ServletManager.callServletService
(ServletManager:940)
[5] com.sun.server.http.InvokerServlet.service
(InvokerServlet:101)
A common problem when using the Java WebServer and other servlet environments is that Exceptions are thrown but are caught and handled outside the scope of your servlet.
The catch command allows you to trap all these exceptions.
webpageservice Handler[1] catch java.io.IOException
webpageservice Handler[1]
Exception: java.io.FileNotFoundException
at com.sun.server.http.FileServlet.sendResponse(
FileServlet.java:153)
at com.sun.server.http.FileServlet.service(
FileServlet.java:114)
at com.sun.server.webserver.FileServlet.service(
FileServlet.java:202)
at javax.servlet.http.HttpServlet.service(
HttpServlet.java:588)
at com.sun.server.ServletManager.callServletService(
ServletManager.java:936)
at com.sun.server.webserver.HttpServiceHandler
.handleRequest(HttpServiceHandler.java:416)
at com.sun.server.webserver.HttpServiceHandler
.handleRequest(HttpServiceHandler.java:246)
at com.sun.server.HandlerThread.run(
HandlerThread.java:154)
This simple example was generated when the file was not found, but this technique can be used for problems with posted data. Remember to use cont to allow the web server
to proceed. To clear this trap use the ignore command.
webpageservice Handler[1] ignore java.io.IOException
webpageservice Handler[1] catch
webpageservice Handler[1]
I hope this will help you.
Thanks
Bakrudeen

How to run exe files using peoplecode?

How to run .exe extension files using peoplecode. It should execute on clicking a button.can anyone provide sample peoplecode for the same.
where do i place the exe files ? Local workstation or Server or FTP?
can i use the same peoplecode if i'm using a button on grid.

1. You can use function Exec in PeopleCode to run any exe file
2. You can use ViewContentURL function in PeopleCode to view any .pdf or .doc documents
Jayaprakash Tedla

How to run dunning wizard using DIAPI

Dear Friends
In a requirement i have to run dunning wizard using DI API but i am unable to find any DI object.
Could you help me please !

Vinit,
This is currently not an option using the DI API.
Apologies,
Eddy

How to run the program using specific classpath

Recently I installed Javamail 1.2 and JAF1.0.1 on my NT Box and set up the classpath. I can compile my java email code by using: javac myEmail.java. But when I tried to run the code using java myEmail, it always gives the error: Exception in thread "main" java.lang.NoClassDefFoundError: myEmail.
when I use -verbose and found that it always goes to:
C:\Program Files\JavaSoft\JRE\1.3.1\lib\rt.jar to find classes even I use -cp option to point Javamail\mail.jar and activation.jar.
what is wrong with it? Thank you in advance!!!!!!

What does this have to do with JMS. I suggest that this should have been posted to the Java Programming forum where you would have gotten a quick response as this is a simple problem to diagnose.
The problem is that the class myEmail, which you created, is not on the class path so it cannot find it. It has nothing to do with the location of mail.jar and activation.jar, although this may cause problems later.
What you need to do is check the classpath in the environment variables section of the System dialog box. Make sure it refers to . (the current directory) as well as the locations of mail.jar and activation.jar. Also when you invoke myEmail ensure you are in the same directory.
Hope this helps

How to run shell script using External Process in Process Flow?

Hi,
We can run external process using Process flow.
I would like to run shell script as external process in Process flow.
Could any one please explain it?
Thanks and regards
Gowtham Sen.

HI,
As you said I tried this case. I got the following error. The script is running successfully while I tested at unix command prompt.
The error is as follows..
tarting Execution PFPS_SMPL_RUNSHELL
Starting Task PFPS_SMPL_RUNSHELL
Starting Task PFPS_SMPL_RUNSHELL:EXTERNALPROCESS
/SOURCE_FILES/CollectFiles.sh: line 1: ls: command not found
/SOURCE_FILES/CollectFiles.sh: line 1: wc: command not found
/SOURCE_FILES/CollectFiles.sh: line 1: ls: command not found
Completing Task PFPS_SMPL_RUNSHELL:EXTERNALPROCESS
Starting Task PFPS_SMPL_RUNSHELL:EXTERNALPROCESS_1
SQL*Plus: Release 10.1.0.2.0 - Production on Fri Sep 29 22:57:39 2006
Copyright (c) 1982, 2004, Oracle. All rights reserved.
ERROR:
ORA-12545: Connect failed because target host or object does not exist
Enter user-name: SP2-0306: Invalid option.
Usage: CONN[ECT] [logon] [AS {SYSDBA|SYSOPER}]
where <logon> ::= <username>[<password>][@<connect_identifier>] | /
Enter user-name: SP2-0306: Invalid option.
Usage: CONN[ECT] [logon] [AS {SYSDBA|SYSOPER}]
where <logon> ::= <username>[<password>][@<connect_identifier>] | /
SP2-0157: unable to CONNECT to ORACLE after 3 attempts, exiting SQL*Plus
Completing Task PFPS_SMPL_RUNSHELL:EXTERNALPROCESS_1
Completing Task PFPS_SMPL_RUNSHELL
Completing Execution PFPS_SMPL_RUNSHELL
My scenario is---
I am trying to return a file name from one shell script. I created a external process for that. After completion of this process, I am running another script which takes that file name and trying to create a external table. The both scripts are runnning successfully. But while I am trying to run using process flow, its not coming.
And I am not getting the way to catch the output of external process and pass it as parameter as another external process.
Any suggestions are welcome.
Thanks and regards
Gowtham Sen.

How to run a FM using wf-batch

Hi all,
We are having one function module for updating production order number in a Z-Table.
So whenever we save a production order this function module is automatically triggered using the user wf-batch and update the order number in the Z-Table.
But we dont know how the function module was triggered using wf-batch when we created production order( Because the fm was created on 1998 by another client)
How to find the link between FM(with wf-batch) and the production order?
Kind Regards
Kumar

Hi aditya,
Tnx for ur reply. But we are not using the WF module.
If i put where used list for that FM then a business object with name Z_2005PP is displayed. In this they are using one method which contains the FM name.
But if i put where used to that BO then no workflow template is available.
So how they triggered the FM using wf-batch whenever they create the production order?
Regards,
Kumar.

How to call Servlet from jsp page and how to run this app using tomcat..?

Hi ,
I wanted to call servlet from jsp action i.e. on submit button of JSP call LoginServlet.Java file.
Please tell me how to do this into jsp page..?
Also i wanted to execute this application using tomcat.
Please tell me how to do this...? what setting are required for this...? what will be url ..??
Thanks.

well....my problem is as follows:
whenever i type...... http://localhost:8080/appName/
i am getting 404 error.....it is not calling to login.jsp (default jsp)
but when i type......http://localhost:8080/appName/login.do........it executes servlet properly.
Basically this 'login.do' is form action (form action='/login.do').....and i wanted to execute this from login jsp only.(from submit button)
In short can anyone please tell me how to diaplay jsp page using tomcat 5.5
plz help me.

How to run ODI scenario using command prompt

Hi expets
Please let me know if we can run ODI scenario using command prompt or any way other than operator.
Regards
Janakiram

Go to <ODI_HOME>/oracledi/bin in command prompt and invoke startscen command with teh below parameters.
Edited by: Guru Sankar on Feb 28, 2011 4:19 PM

How to control SWF Video using JavaScript?

Hi,
I'm developing a web page which will use Flash Videos. I need
to control the video without using a typical skin. The current tool
I'm using to convert my wmv to SWF FLV is Coffee Cup. A hex edit
suggests this is a Version 8 SWF.
I am trying to write some javascript to control which Frame
is displayed. I have seen code such as movie.TGotoFrame(...); and
movie.GotoFrame, movie.StopPlay() etc. Unfortunately I cannot seem
to use these methods. Eventually I suspected that my SWF simply did
not make these methods available and when I run my video in my web
page a RightClick shows a Context Menu that has no Reverse,
Forward, Back options. Other SWF videos do have these options
(obviously). This seems to prove that nothing I could code would
make the GotoFrame work (ie no Forward (by one frame) option in
menu suggests it could never work from javascript).
Some Questions
Is there a tool to examine a SWF to see what methods are
available to javascript control? (expose the API) and is there a
setting required in the <object> setup to enable javascript
interaction?
Is there something about SWF V8 files that is the problem or
is likely that the CoffeeCup Web Video Player can only make
partially functioning SWF Videos?
What is the difference between GotoFrame and TGotoFrame and
have these perhaps been superceeded by something else (there is an
Adobe page which suggests they are only available up to Version 5
(not sure if that means Version 5 of SWF files or Version 5 of the
FlashPlayer - to add to my confusion).
I'm not currently a Flash type developer and have no tools to
speak off and don't know ActionScript. I'm thinking of heading in
the Flash direction but not sure how to move forward.
Cheers
Stuart

Thanks Alex,
quote:
You need to learn to move forward :)
I have a Greek friend who when I asked him how he was getting
on with his dissertation project stated "in Greece we have a saying
- every start is different".
In this case my start is to dip a toe in the Flash water and
not get scalded.
Anyhow,
One clarification from the CoffeeCup forum helped me to
understand that my SWF used an external FLV and that may explain
why the rightclick context menu did not have the more movie
specific Back, Forward etc. Sounds plausible. So assume external
FLV.
quote:
it is very easy to add a small script into the root timeline
of your SWF file
A little hand holding here would be appreciated. I have
downloaded the Flex SDK. Can I use this free tool to do what you
suggest? Using MXML and ActionScript. If so, a little bit more info
would help.
quote:
That's all, it should work. Of course, you can tell me that
your movie
already has an onEnterFrame() eventhandler at the root
timeline.
What's a problem? Just create an empty movieclip and add this
script
into its frame 1 (it maybe the only frame). But do not forget
to
change "this.xxxx" to "_root.xxxx" within such script.
Hhhmmm. A bit stumped. I've had a look at the SWF using
FlashDig. I noticed what appears to be Assembly Language (Push,
Pops, Jumps etc) and presumably in amongst all of that may be an
onEnterFrame. Perhaps linked to a DefineFunction2 node.
Unfortunately the SWF is very large (60K) and there is no
search/find tool so that makes finding functions a bit harder than
expected. Struggling a little with the concept of _root and Level0
etc.
I assume you are suggesting manually building a replacement
SWF (empty movieclip?) if the onEventHandler happens to be used for
something else. Presumably set/getVariables only interacts with
this function so if it is 'booked' in my SWF I would be in a spot
of bother with your suggested approach?
I wonder if you are assuming I have some sort of Flash tool.
Possibly like this one shown in this tutorial
WebWasp
Panorama tutorial
Note. The panorama is actually close to what I eventually
want to do except I intend to make a video of a scene by rotating
clockwise by 360 degrees. Then add buttons onto the SWF (or DHTML)
which communicates with the SWF to move forward or back through the
video. Moving forward would be like a clockwise rotation and moving
back would create anticlockwise rotation. This explains the need to
GotoFrame (or similar). From that perspective I don't need to
become a Flash guru (for now) and can't justify buying all the
expensive flash tools for this one (apparently) simple task: Frame
by Frame control of an external FLV via the SWF.
Note. I've started using SWFObject. Might this library help?
In summary.
How do I add the onEnterFrame ActionScript sample (or
something similar) into a SWF using only the Flex SDK command line
tools or similar in order to control an external FLV?
Cheers
Stuart

How to run swf's using Proscenium

Similar Messages

Maybe you are looking for