How to run the Quick Repair in Uninstall a Program from the command line

Hello everyone.  Right now we're manually going onto machines and opening Control Panel, Uninstall a Program, then doing a Change on our Office 365 2013 installs to run the Quick Repair option.  Is there a better way to do this with a command line
command (that only references local files on the machines), or just issues the same exact command that our manual intervention described above does? 
We have the click to run version installed also if that matters.

Hi,
To run a Quick Repair for 64-bit operating systems:
“C:\program files\Microsoft Office 15\ClientX64\integratedoffice.exe” RUNMODE RERUNMODE modetorun repair
To run a Quick Repair for 32-bit operating systems:
“C:\program files\Microsoft Office 15\ClientX86\integratedoffice.exe” RUNMODE RERUNMODE modetorun repair
Note: The above commands need to be run from an elevated command prompt.
For more information, please refer:
http://blogs.technet.com/b/office_resource_kit/archive/2013/06/17/automating-quick-repairs-in-office-365-proplus.aspx
Hope this helps.
Regards,
Steve Fan
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Similar Messages

  • How can hide the command line of a t.code in the portal

    Dear Experts.
    I have the following doubt:
    How can hide the Command Line of a Report that is called with a T.Code in the portal?
    Attach Image:
    [Image T.Code|http://www.freeimagehosting.net/uploads/eab3b6a03c.jpg]
    When I created a service using the T.Code SICF for the T.Code , I can hide buttons and the filed command line  using
    ~webgui_simple_toolbar
    ~singletransaction
    ~NOHEADEROKCODE
    With notes 1010519, "SAP GUI for HTML: Simplified Title Area Without Menu and OK Code" and 959417.
    But the problem is that when I create the service in the T.Code SICF, I also have that create an Iview IAC in the portal.
    The Question is : How can hide this fields and buttons if I want Publish the T.code using an Iview Transaction in the portal?
    In this moment I have used the two options:
    1 option) I created a service using the t.Code SICF for my Transaction and I also created an Iview IAC in the portal for call the service.
    RESULT:
    SAP Web Application Server
             500 Connection timed out
            Error: -5
           Version: 7000
           Component: ICM
           Date/Time: Sat Jun 12 20:26:39 2010 
           Module: icxxthr_mt.c
           Line: 2698
           Server: xyxab...
    Error Tag: {-}
    Detail: Connection to partner timed out after 60s
    2)  created an Iview Transaction  in the portal and  call my transaction.
    RESULT.
    [Image T.Code|http://www.freeimagehosting.net/uploads/eab3b6a03c.jpg]
    But not can hide the field Command Line and other buttons.
    I think that the command :
    ~webgui_simple_toolbar
    ~singletransaction
    ~NOHEADEROKCODE
    Only can be used if I create a service using the T.Code SICF .
    Best Regards
    Carmen.

    Hi Carmen,
    The bottom line is that this cannot be done for transaction iviews without modifying the standard webgui service in SICF, which is probably not a good idea (since it affects everyone using SAP GUI for HTML). (You could hack the appintegrator to add the ~webgui_simple_toolbar parameter to the transaction URL template in the portal, but again its not a recommended thing to do ...). Better to create an IAC service in SICF with ~webgui=1 where you set the required appearance using an appropriate value for ~webgui_simple_toolbar, and then create an IAC iview to point at this service.
    You can even override the ~transaction value configured in the new service in individual IAC iviews by entering the appropriate value in the application parameter of the iview, for example:
    ~okcode=/nSU01
    And you can pass parameters in the same way:
    ~okcode=/nSU01 USR02-BNAME=xyz;USREFUS-USERALIAS=abc;
    By the way, it would not be recommended to create a URL iview to access an IAC, since you are likely to encounter session management issues in this scenario - better to use an IAC iview.
    Regards, Rory

  • How to break the command line in SAP scripts

    Hi,
      Can any one Please guide me how to continue the command line( /: ) of SAP SCPRIPT into multiple lines.
    Regards
    Kiran

    Hi Kiran,
    U can continue in the same line itself by pressing SHIFT+F8
    If u want it in the next line then u can give space in the tag column.
    Thanks,
    Vinod.

  • How To Parse The Command Line?

    Hello,dear. When I writing a C/S mode application,which performing download and upload files between the FTP server and the clients, I encountered the problem of parsing the command line.
    I intend to download file from the server side ,using this following format ,which is composed by four arguments:
    ftp>receive server's IPaddress portnumber filename
    The problem is I don't know how to parse the command line and store them to some objects and using it.
    I'm right here waiting for the nice problem-shooter.
    Thanks for reading my poor expression.

    In your console application main class
    public static void main(String[] args)
    // code
    args is a sting array with the command
    line itemsI think you missed the point or forgot the ":-)". This is the "Socket", not the "New to Java" forum.

  • How to hide the command line arguments from solaris process

    Hi All,
    When I execute a JAR application from a java file using the Runtime.getRuntime, the command line arguments (user ID and Password details) which I passed for executing the application displayed on Solaris process (ps -ef).
    Could anybody please help me, how can I hide either the process or the command line arguments from the Solaris process?
    I cannot pass any asterix or any special character in place of password, because the executing application doesn't have any functionality to retreive the password which send as asterix characters.
    Please help me
    SumodeV

    Thanks for all the response.
    I have created a design and implement the functionality which executes the JAR application in Solaris environment without showing any details in the process details.
    I have used the Java Reflection method, which invokes the JAR application. I am sharing the details here for all those who looking for it.
    1, Inside the Customer application [Jar File is running for it], collect the necessary session details [Using System.get property method]
    2, Create an independent Java file, which should be used to invoke the JAR application
    3, Create the ProcessBuilder object and use a command - execute the Java file [a wrapper code] using normal Java command
    4, Pass the necessary session details to the ProcessBuilder using the environment() function.
    5. Collect the environment values in the independent Java file (Which was invoked by ProcessBuilder) and set details for its environment using System.setProperty.
    6, Use reflection technique to invoke the JAR plugin [which you want to run]. You can use the standard Java functionality to read the MANIFEST file of JAR and load the main class using URLClassLoader.
    7, Invoke the main method of the JAR file, which run the JAR application in Solaris window
    This solution will make sure that the process cannot display any session details in the Solaris Environment.
    Note: Use String[] array while create the command. Otherwise the JAR application cannot pop-up.
    Regards
    Sumode

  • How to get the command line interface for WRT160NL router

    hi,
    How can I get the command line interface for WRT160NL router. please suggest.

    If you’re trying to access the web-based interface of your router, just use its default IP address (192.168.1.1). The Username is left blank and the Password is "admin". Here’s a quick link on how to do that.

  • Can't run java .class programs from Windows command line!

    I have tried to get a program that I wrote with the JDK to run from the Windows command line, but it is not working. I typed:
    java HelloWorld
    Where my .class was HelloWorld.class, a compiled java program. I spelled the name correctly (and I am in the correct directory), yet I get the following error:
    Exception in thread "main" java.lang.NoClassDefFoundError: HelloWorld
    I think something is screwy with windows, but that's just me. Any ideas??

    Likely a CLASSPATH issue - try
    java -classpath . HelloWorldGood Luck
    Lee

  • My safari browser seems to have been taken over by a malicious program called only-search.  Does any one know how to uninstall this program from safari?  I am running osX 10.10.

    My safari browser seems to have been taken over by a malicious program called only-search.  Does any one know how to uninstall this program from safari?  I am running osX 10.10.

    There is no need to download anything to solve this problem.
    You may have installed the "VSearch" trojan. Remove it as follows.
    Malware is always changing to get around the defenses against it. These instructions are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
    Back up all data before proceeding.
    Step 1
    From the Safari menu bar, select
              Safari ▹ Preferences... ▹ Extensions
    Uninstall any extensions you don't know you need, including any that have the word "Spigot," "Trovi," or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
    Reset the home page and default search engine in all the browsers, if it was changed.
    Step 2
    Triple-click anywhere in the line below on this page to select it:
    /Library/LaunchAgents/com.vsearch.agent.plist
    Right-click or control-click the line and select
              Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.* A folder should open with an item named "com.vsearch.agent.plist" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
    Repeat with each of these lines:
    /Library/LaunchDaemons/com.vsearch.daemon.plist
    /Library/LaunchDaemons/com.vsearch.helper.plist
    Restart the computer and empty the Trash. Then delete the following items in the same way:
    /Library/Application Support/VSearch
    /System/Library/Frameworks/VSearch.framework
    ~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
    Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
    The problem may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
    This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow.
    You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the Internet criminal behind VSearch has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

  • How to run the form that is only installed on a PC and not using a server?

    Hi
    I am new to Oracle and have taken the forms class. But I do not understand how to run the form from my PC using XP windows. (Do not have access to a server).
    I have started the OC4J, made sure the listener was started, compiled the form and then when I run it, it automatically goes to the HTTP:
    ERROR: res://ieframe.dll/acr_depnx_error.htm#,http://kevin:8889/forms/frmservle
    I connected to the database correctly. I can process a report and it does nor try to access the internet. My only issue is running the form. I verified it compiled.
    Sorry for a basic question. Could someone please help, I tried reviewing other questions, but not sure if they are connecting to a server or not.
    I see webutil but is it required if I don't have a server? Thank you in advance.

    Regardless of the version, it appears that you may not have configured the Builder. Do the following:
    1. Open the Builder
    2. From the menu, select Edit > Preferences > Runtime
    3. In the box labeled "Application Server URL:", enter a local URL needed to run a form OR click the button labeled "Reset to Default". If you decide to manually enter a value, it would looks something like this:
    http://localhost:8889/forms/frmservlet
    4. In the field labeled "Web Browser Location:", enter the path and executable to your preferred browser. So for example if IE is your browser of choice the entry would most likely look like this:
    C:\Program Files\Internet Explorer\IEXPLORE.EXE
    5. Click on OK and retest.
    By the way, you can manually enter a URL in the browser. Clicking the RunForm button from the Builder is strictly optional. To run the "test" form directly from the browser enter the following into the browser's address field:
    http://localhost:8889/forms/frmservlet?form=test
    More information about Forms can be found on OTN:
    http://www.oracle.com/technology/products/forms/index.html

  • How to run the ejb project in j2ee server

    How to run the EJB project.
    I give like
    java conveterClient converterClient.jar
    here conveterClient is class file name and converterClient.jar is deployed file
    like wise i give some exception is come
    give some help pls friends

    Navigate to the "DBOrders" module in the catalog, right click on the "ORDERS" database below and click "Export Schema Stucture". That will produce a file containing the DML needed to create the database

  • HOw to run the Applet in dos mode

    how to run the applet in Command Prompt(DOS).
    I have save this in directory D/vijay/javap/A.java and my JDK is in C drive.
    Plz send me reply as soon as possible.
    My code is :-
    import java.applet.*;
    import java.awt.*;
    public class A extends Applet
    private int w, h;
    public void init( )
         w = 45;
         h = 50;
    public void paint(Graphics g)
         g.drawRect(w, h, 20, 80);
    }

    import java.applet.*;
    import java.awt.*;
    public class A extends Applet
    private int w, h;
    public void init( )
    w = 45;
    h = 50;
    public void paint(Graphics g)
    g.drawRect(w, h, 20, 80);
    <applet class="A" height="200" width="200" code="A.class">
    </applet>
    */And in command prompt
    javac A.java
    appletviewer A.java
    Message was edited by:
    passion_for_java

  • How to run the programes in NetBeans

    any body know how to run the java progarm in NetBeans.
    can u please guide me?
    Advance in thanks

    thanks for ur reply.
    this is my code.
    public class sample11 {
    /** Creates a new instance of sample11 */
    public sample11() {
    public static void main(String args[])
    System.out.println("nithya");
    i did watever u told. but i don't have o/p. wat can i do? how to it display the o/p?

  • How to run the query in  screen painter

    i am using the patch 36 in business one so pls give information  about 
       how to run the query in  screen painter 
    regard
      sandip adhav

    Hope u have reached Screen painter interface,
    1. Click 'Add Grid' from tool bar.
    2. Go to 'Collections' tab in 'Properties' window.
    3. Choose 'Data Tables' from the Drop down list.
    4. Click 'New' found at the bottom of the Properties Window(same window)
    5. U'll find the place to insert ur query.
    6. U can rename the table name from 'DT_0'
    7. Choose type as 'Query'
    8. Clear content from box 'Query'
    9. Enter ur query there. Dont forget to Click 'SET'
    10. Go to Preview option from tool bar.
    now ur query will be displayed as table format.
    Note: First try with simple query b4 going for linking option.
    Regards,
    Dhana.

  • How to run the smsserver in xp

    hi friends,
    May i know, how to run the smsserver in windows xp...

    What smsserver?
    Please ask detailed questions.

  • How to run the Invoices in different groups within the batch in AP

    Need to know that how to run the Invoices in different groups within the batch. This will be of very helpful when we deal with lot of lines under one batch. (e.g) like somewhere we issued a Corporate Card to all the employees Via Bank Of America. Every Month they will send the complete details of all the employees who ever swiped the corporate provided BOA. Accordding to Natco all those lines should be loaded as One Invoice so that a Single Payment can be provided to BOA and it will also makes their life easier. This standard program sometimes it works normal sometimes it will run like a TORTOISE. So thats why in the manual they suggested to use GROUP ID to split the Invoice Load.
    So plz tell me how we can run it
    plz give me the solution
    thanks

    can you give me some material or document on that so that i can read actuaaly i need to make doc on it..

Maybe you are looking for