How to run the rmi security manager
how to run the rmi security manager
You need to make a special class, where you give all permissions or socket permissions, then in promt you just call this class with following:
java -Djava.security.all=all then package name, then Class name. All is the name og permission class.
Good luck!
Similar Messages
-
How to run OPatch against Node Manager from the admin server
How to run OPatch against Node Manager from the admin server
Hello,
I'm not sure what you meant by Opatch against nodemanager.You can check the below document about how to apply patches using Opatch
Oracle Fusion Middleware Patching with OPatch - 12c (12.1.2)
Refer the section " Common OPatch Commands When Patching an Oracle Fusion Middleware Oracle home"
/MR -
How to run the parameter form example report :pform_report.jsp
how to run the parameter form example report : pform_report.jsp ?
I got these error message:
Reports Error Page
Sat Oct 18 11:58:24 CST 2003
javax.servlet.jsp.JspException: rwlib-1: REP-6106: (, 4 L, XML 1h��/�� ' PI with the name 'xml' can occur only in the beginning of the document.'.
javax.servlet.jsp.JspException: rwlib-1: REP-6106: (, 4 L, XML 1h��/��
PI with the name 'xml' can occur only in the beginning of the document.'.
at oracle.reports.jsp.ObjectsTag.doEndTag(ObjectsTag.java:180)
at examples.tools._pform__report._jspService(_pform__report.java:79)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:302)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:407)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:330)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:336)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:66)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:283)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:539)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:285)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:771)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:152)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:72)
at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:796)
at java.lang.Thread.run(Thread.java:484)repost !
please help! -
Hi Experts,
I am trying to implement automatic cache purging every day at specified time and i created txt file with SApurge All cache() and created bat file with nqcmd -q Analyticsweb -u username -p password -s (txt file location).
Now i want to run this bat file daily at specified time with out executing manually may i know how to run the batch file at specified time .
Thanks,There is task type as command in workflow manager if you want you can go for that during the load
nqcmd -d "AnalyticsWeb" -u Administrator -p Administrator -s "D:\PowerCenter8.1.1\server\infa_shared\SrcFiles\1_BIPurgeCache.txt"
Check these urls
http://docs.oracle.com/cd/E12103_01/books/AnySched/AnySched_Scripts3.html
http://deliverbi.blogspot.com/2011/12/purge-all-cache-from-dashboard.html -
How to run the JNLP from Command Line
Hi All,
how to run the JNLP file from the remote machine from our command line. I have requirement to run this JNLP file in java 1.4.2 version. Can any one tell me the procedure or the steps that are needed to run this file at command prompt.
Regards,
Prasanna.
Edited by: VPrasanna on May 19, 2008 4:43 AM>
I am getting "**java.security.AccessControlException: access denied (java.net.SocketPermission wwwgate0.mot.com:1080 connect,resolve)**" when I start the Web Start Client. >This seems like a largely separate problem to running the JNLP from the command line. It might have been better to end this thread (assign the dukes) and start a new one.
>
..Can you help me in resolving this issue. >However, I suspect I can guess the problem.
If this app. is normally hosted on wwwgate0.mot.com then it can 'phone home' to the server without further permission, but if you are running it from the command line, that might not be the codebase anymore.
If you wish to do 'local testing' of such an app., I would recommend setting up a server like Tomcat on the local machine, and serving the test app. directly off that.
>
..Its urgent...>Sun offers a number of options for urgent matters, such as support tickets. Perhaps you should look into one of those. -
How to run the bw workspace in browser
Hi Folks,
Good Day!.
I have created bw workspace in bw system powered by hana and may iknow the option how to run the workspace in browser.
Please guide.
Thanks,
HariYou will need to install a JRE to take over the VM of your browser. JRE stands for Java Runtime Eviroment.
Do this, and you will be able to view applets using Swing in your browser. JRE can be found on the download page. About security concerns, I've got a Swing Applet to work with access to client clipboard so this is also possible. For some people however this does not seem to work. I dont know why but perhaps it could work for you. Check out the thread http://forum.java.sun.com/thread.jsp?forum=63&thread=197092 -
How to run the samplecode JMF20_guide.pdf provide?
The pdf document has a samplecode in page 100,but how to run the code?My code like this:
public static void main(String[] args)
CaptureAudio ca=new CaptureAudio();
ca.captureDevice();
//capture and play audio from a microphone
public void captureDevice()
Vector deviceList=CaptureDeviceManager.getDeviceList(new AudioFormat("linear",44100,16,2));
if(deviceList.size()>0)
di=(CaptureDeviceInfo)deviceList.firstElement();
else
System.exit(-1);
try
Player p=Manager.createPlayer(di.getLocator());
catch(IOException e)
catch(NoPlayerException e)
but sames not of my desired result,why?
I had a microphone on my computer,It sames the code could capture the device.
Another question,how could I capture the video device?
Vector deviceList=CaptureDeviceManager.getDeviceList(new VideoFormat("JPEG"));
Is this?1. The code you showed here isn't the complete one so you can see the whole picture. This code can be used in audio transmission ( example code can be found in AVTransmit2.java in the JMF/Solutions). For your current piece of code, if you want to see if you already got the capture device ready, Simply print out the deviceList to console.
2. If it still does not work, open Java registry app, and click capture device tab, then click the button: "detect capture device", which goes through a search/registration process.
3. If you tried to got all Audio/Video capture devices, simply use
deviceList = CaptureDeviceManager.getDeviceList(null); -
How to run the job using DBMS_SCHEDULER
How to run the job using DBMS_SCHEDULER
pleas give some sample Iam very new to DBMS_SCHEDULERHi
DBMS_SCHEDULER
In Oracle 10g the DBMS_JOB package is replaced by the DBMS_SCHEDULER package. The DBMS_JOB package is now depricated and in Oracle 10g it's only provided for backward compatibility. From Oracle 10g the DBMS_JOB package should not be used any more, because is could not exist in a future version of Oracle.
With DBMS_SCHEDULER Oracle procedures and functions can be executed. Also binary and shell-scripts can be scheduled.
Rights
If you have DBA rights you can do all the scheduling. For administering job scheduling you need the privileges belonging to the SCHEDULER_ADMIN role. To create and run jobs in your own schedule you need the 'CREATE JOB' privilege.
With DBMS_JOB you needed to set an initialization parameter to start a job coordinator background process. With Oracle 10g DBMS_SCHEDULER this is not needed any more.
If you want to user resource plans and/or consumer groups you need to set a system parameter:
ALTER SYSTEM SET RESOURCE_LIMIT = TRUE;
Baisc Parts: Job
A job instructs the scheduler to run a specific program at a specific time on a specific date.
Programs
A program contains the code (or reference to the code ) that needs to be run to accomplish a task. It also contains parameters that should be passed to the program at runtime. And it?s an independent object that can referenced by many jobs
Schedules
A schedule contains a start date, an optional end date, and repeat interval with these elements; an execution schedule can be calculated.
Windows
A window identifies a recurring block of time during which a specific resource plan should be enabled to govern resource allocation for the database.
Job groups
A job group is a logical method of classifying jobs with similar characteristics.
Window groups
A window groups is a logical method of grouping windows. They simplify the management of windows by allowing the members of the group to be manipulated as one object. Unlike job groups, window groups don?t set default characteristics for windows that belong to the group.
Using Job Scheduler
SQL> drop table emp;
SQL> Create table emp (eno int, esal int);
SQL > begin
dbms_scheduler.create_job (
job_name => 'test_abc',
job_type => 'PLSQL_BLOCK',
job_action => 'update emp set esal=esal*10 ;',
start_date => SYSDATE,
repeat_interval => 'FREQ=DAILY; INTERVAL=10',
comments => 'Iam tesing scheduler');
end;
PL/SQL procedure successfully completed.
Verification
To verify that job was created, the DBA | ALL | USER_SCHEDULER_JOBS view can be queried.
SQL> select job_name,enabled,run_count from user_scheduler_jobs;
JOB_NAME ENABL RUN_COUNT
TEST_abc FALSE 0
Note :
As you can see from the results, the job was indeed created, but is not enabled because the ENABLE attribute was not explicitly set in the CREATE_JOB procedure.
Run your job
SQL> begin
2 dbms_scheduler.run_job('TEST_abc',TRUE);
3* end;
SQL> /
PL/SQL procedure successfully completed.
SQL> select job_name,enabled,run_count from user_scheduler_jobs;
JOB_NAME ENABL RUN_COUNT
TEST_ABC FALSE 0
Copying Jobs
SQL> begin
2 dbms_scheduler.copy_job('TEST_ABC','NEW_TEST_ABC');
3 END;
4 /
PL/SQL procedure successfully completed. Hope it will help you upto some level..!!
Regards
K -
Revision: 18814
Revision: 18814
Author: [email protected]
Date: 2010-11-24 09:31:56 -0800 (Wed, 24 Nov 2010)
Log Message:
Add manual test for BLZ-594 with instructions on how to run the test.
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-594
Modified Paths:
blazeds/trunk/qa/apps/qa-manual/WEB-INF/flex/remoting-config.mods.xml
Added Paths:
blazeds/trunk/qa/apps/qa-manual/WEB-INF/src/test/
blazeds/trunk/qa/apps/qa-manual/WEB-INF/src/test/RpcTest.java
blazeds/trunk/qa/apps/qa-manual/bugs/BLZ-594/
blazeds/trunk/qa/apps/qa-manual/bugs/BLZ-594/BLZ-594.mxml
blazeds/trunk/qa/apps/qa-manual/bugs/BLZ-594/readme.txtYou do have a very complex looking site and may need several tables in mysql to handle all that data. If you knew to phpmysql I would suggest taking a look at this tutorial it will help get you started in understanding how to $_GET info from a database and also how to $_POST data to a database. I am no expert just learning myself and I found this very helpful. This is the link http://www.adobe.com/devnet/dreamweaver/articles/first_dynamic_site_pt1.html
There are also many tutorials on Youtube to help build a CMS Content Management Site I would suggest the following: -
http://www.youtube.com/user/phpacademy
http://www.youtube.com/user/betterphp
http://www.youtube.com/user/flashbuilding
And many more on my channel here
http://www.youtube.com/user/Whisperingonthewind
CMS's are easier to maintain, add edit and delete content.
I have also recently bought a Book by David Powers Training from the Source very helpful.
Anyway hope you get it sorted. -
How to run the form that is only installed on a PC and not using a server?
Hi
I am new to Oracle and have taken the forms class. But I do not understand how to run the form from my PC using XP windows. (Do not have access to a server).
I have started the OC4J, made sure the listener was started, compiled the form and then when I run it, it automatically goes to the HTTP:
ERROR: res://ieframe.dll/acr_depnx_error.htm#,http://kevin:8889/forms/frmservle
I connected to the database correctly. I can process a report and it does nor try to access the internet. My only issue is running the form. I verified it compiled.
Sorry for a basic question. Could someone please help, I tried reviewing other questions, but not sure if they are connecting to a server or not.
I see webutil but is it required if I don't have a server? Thank you in advance.Regardless of the version, it appears that you may not have configured the Builder. Do the following:
1. Open the Builder
2. From the menu, select Edit > Preferences > Runtime
3. In the box labeled "Application Server URL:", enter a local URL needed to run a form OR click the button labeled "Reset to Default". If you decide to manually enter a value, it would looks something like this:
http://localhost:8889/forms/frmservlet
4. In the field labeled "Web Browser Location:", enter the path and executable to your preferred browser. So for example if IE is your browser of choice the entry would most likely look like this:
C:\Program Files\Internet Explorer\IEXPLORE.EXE
5. Click on OK and retest.
By the way, you can manually enter a URL in the browser. Clicking the RunForm button from the Builder is strictly optional. To run the "test" form directly from the browser enter the following into the browser's address field:
http://localhost:8889/forms/frmservlet?form=test
More information about Forms can be found on OTN:
http://www.oracle.com/technology/products/forms/index.html -
How to run the ejb project in j2ee server
How to run the EJB project.
I give like
java conveterClient converterClient.jar
here conveterClient is class file name and converterClient.jar is deployed file
like wise i give some exception is come
give some help pls friendsNavigate to the "DBOrders" module in the catalog, right click on the "ORDERS" database below and click "Export Schema Stucture". That will produce a file containing the DML needed to create the database
-
HOw to run the Applet in dos mode
how to run the applet in Command Prompt(DOS).
I have save this in directory D/vijay/javap/A.java and my JDK is in C drive.
Plz send me reply as soon as possible.
My code is :-
import java.applet.*;
import java.awt.*;
public class A extends Applet
private int w, h;
public void init( )
w = 45;
h = 50;
public void paint(Graphics g)
g.drawRect(w, h, 20, 80);
}import java.applet.*;
import java.awt.*;
public class A extends Applet
private int w, h;
public void init( )
w = 45;
h = 50;
public void paint(Graphics g)
g.drawRect(w, h, 20, 80);
<applet class="A" height="200" width="200" code="A.class">
</applet>
*/And in command prompt
javac A.java
appletviewer A.java
Message was edited by:
passion_for_java -
How to run the programes in NetBeans
any body know how to run the java progarm in NetBeans.
can u please guide me?
Advance in thanksthanks for ur reply.
this is my code.
public class sample11 {
/** Creates a new instance of sample11 */
public sample11() {
public static void main(String args[])
System.out.println("nithya");
i did watever u told. but i don't have o/p. wat can i do? how to it display the o/p? -
How to run the query in screen painter
i am using the patch 36 in business one so pls give information about
how to run the query in screen painter
regard
sandip adhavHope u have reached Screen painter interface,
1. Click 'Add Grid' from tool bar.
2. Go to 'Collections' tab in 'Properties' window.
3. Choose 'Data Tables' from the Drop down list.
4. Click 'New' found at the bottom of the Properties Window(same window)
5. U'll find the place to insert ur query.
6. U can rename the table name from 'DT_0'
7. Choose type as 'Query'
8. Clear content from box 'Query'
9. Enter ur query there. Dont forget to Click 'SET'
10. Go to Preview option from tool bar.
now ur query will be displayed as table format.
Note: First try with simple query b4 going for linking option.
Regards,
Dhana. -
How to run the smsserver in xp
hi friends,
May i know, how to run the smsserver in windows xp...What smsserver?
Please ask detailed questions.
Maybe you are looking for
-
How to set value from one view to other view's context node attr b4 save
HI all, My requirement is as below: There are two views in component BP_CONT. BP_CONT/ContactDetails IMPL class BP_CONT/SalesEmployee SALESEMPLOYEE STRUCT.SALESEMPLOYEE I want to set value from first view to second view's context node's attri
-
My acer Aspire V7-481P touchscreen stopped working. I can no longer find the pen and touch settings on my computer, please help, I have tried to download all the drivers on the acer website and it is still not working. The touchscreen previously work
-
Getting Portal Runtime Error while accessing one link in Portal Page.
Hi, Can anyone tell why I am getting below error while accessing one of the portal page link: " Portal runtime error. An exception occurred while processing your request. Send the exception ID to your portal administrator. Exception ID: 01:19_27/02/0
-
Hp pavilion g6 laptop dvd drive issues
I have an hp g6-1c77nr laptop that is less than a year old and has been working fine until today. Suddenly my dvd drive isnt registering discs in the drive. I tried multiple discs, unistalling the drivers then reinstalling the drivers, checking fo
-
Hello, I am new in strans transaction, i have created a XSLT program with this tag, how can i make that this label not appear in the xml file if it the variable nmens is empty? <nmens> <xsl:apply-templates select="nmens"/> </nmens>