How to run the set-up program with a brand new X200?

I bought a brand new X200 from TigerDirect. As their guidance of shipping, I tested it within very short time. When I turned on the machine, a program was automatically run to have me to make some necessary configuration roughly ASAP so that the shipping boy could get my receipt. Now I wanna run it again to refine the configuration but found out that I don't know how to manually run it again. Another confusion is I didn't find the recovery disc in the box. Why? Do you think there's some problems? And more, even I got the disc, after I upgraded the OS from Vista Business to Windows 7, if the the disc would be available for the new system? Or I have to order a new one for Windows 7?

If I'm reading your note correctly, you had to open the package and boot in the presence of the delivery driver to generate a document before the driver could leave.
If that is the case, this isn't a Lenovo function and unlikely to be restored by any Lenovo Repair / Recovery.
Tiger Direct is your resource to restore the system to that point in time.
A good tip, every new computer should be imaged as a slave drive or with a proven boot stick / boot CD and archived before powered into the included MBR and OS, archive the image to a DVD and another DVD or reliable source and youll always have a pristineimage of your laptop at "zero day"
Those images are helpful at resale and often coveted by buyers of used gear in the Thinkpad community.
Don't just sit there, take a second and use the Kudo's button to compliment the people who help you.

Similar Messages

How to run the AVReaderWriterOSX demo program?

When I build and run the AVReaderWriterOSX demo program, it does not do anything. I eventually have to kill it because there is no way to interact with it. What is the proper way to run the AVReaderWriterOSX program?

Doh, I just realized the AVReaderWriter app has a toolbar at the top of the screen, where I can interact with it. I am able to get it to process a movie now, thanks!

How to run a standalone java program with JRC to display/run a report

Hi All,
I am new to this forum.
I am trying to run a java program developed using JRC to run a report created using Crystal Report XI. I stucked because not knowing how to run that java program.
Can anyone help me? or
can give a simple java code to do the same.
Thanks in advance.
Saravanakumar.

Hi Saravana
For the steps to run a standalone application java program with JRC to display/run a report ,please refer the following link.
http://support.businessobjects.com/communityCS/TechnicalPapers/cr_xi_r2_jrc_deployment.pdf.asp
You can get the sample code for standalone/desktop applications from the following link.
http://support.businessobjects.com/communityCS/FilesAndUpdates/crxi_r2_jrc_desktop_samples.zip.asp
Please do revert in case of any queries.
Thanks
Soni

How to run the w120p.rex program in Solaris

Hi,
I'm new to Solaris, i want to run one .rex program from solaris. My program w120p.rex which is working fine in windows. I want to run the same from the Solaris. I dont know how to do in Solaris. Can any one help me in this?
Thanks in advance....

This forum is about Sun Studio C compiler and C programming in general. I suggest you ask on one of OpenSolaris forums - http://www.opensolaris.org/jive/index.jspa?categoryID=1
If I get it right and you are looking for Rexx interpreter, you'll need to download and install it first. Here are first two links I found myself:
http://nixbit.com/cat/programming/interpreters/regina-rexx-interpreter/
http://users.comlab.ox.ac.uk/ian.collier/Rexx/rexximc.html
If you are new to Unix in general, there are several subjects you need to cover before you proceed; one of places to start is again a Solaris forum - http://forums.sun.com/forum.jspa?forumID=863

How to run the exemple client program in win98

HI
I have installed weblogic server5.1 in windows 98 and while i try to run my client program from dos prompt it is not working.
i am calling my from the same m/c where i installed weblogic server like this:
This program is given in the weblogic example
c:\java examples.ejb.basic.statelessSession.Client
"t3://localhost:7001"
but it shows some error.so pls help me

aravanan wrote:
>
HI
I have installed weblogic server5.1 in windows 98 and while i try to run my client program from dos prompt it is not working.
i am calling my from the same m/c where i installed weblogic server like this:
This program is given in the weblogic example
c:\java examples.ejb.basic.statelessSession.Client
"t3://localhost:7001"
but it shows some error.so pls help mewhat error?
Post the stack trace here..
Kumar

Mini DisplayPort to VGA isn't working. It won't recognize any external monitor. It worked just fine with my older spring 2011 MacBook Pro running Snow Leopard, but now with my brand new 2012 MacBook Pro running Mountain Lion, it no longer works

I just bought a new MacBook Pro this summer and was all excited. But I'm very frustrated right now because I can't connect to any external monitors through VGA. My thunderbolt (DisplayPort Mini) to HDMI works just fine, but when I try with my other connector to go from Thunderbolt (DisplayPort Mini) to VGA, Nothing works. my screen goes blue and changes size like it recognized something but nothing is ever detected on the external moniter or projector. I'm not sure what is wrong but it's very frustrating. I'm just very depressed that it worked just fine with my 2-year-old MacBook Pro but isn't working now. I'm running OS X 10.8.2. I just upgraded yesterday from 10.8.1 but that upgrade did nothing to fix my problem. Can anyone help? Thanks

I am haveing this exact same issue. I have plugging in 3 monitors and tried two different VGA to mini displayport and nothing is working. I recently bought a Acer monitor and it work for an hour and now it back to doing the same thing.
When I plug the VGA adapter in to the monitor the monitor think its not connected to a computer then when disconnecting the VGA adapter the monitor thinks it is connected to a computer.
NEED SOME HELP!!! at the point of all my hair is pulled out.
^^^
that is the same problem i am having! if anyone can help that would be great i'm losing my mind over here

(UNBOXING) It is the time to revenge with my brand new AIO-PC AG240

I am a heavy computer user, and spend most of the time on my PC for browsing, working AND GAMING!!!!!! Recently, I was tired of my previous PC, not only the slow-processor but also the su...

it is a replaced motherboard
for now my 4670 sits on asus max 7 ranger and my g3258 sits on msi z97 gaming 5 (will upgrade it to broadwell)
I don't if what is the culprit, if it is bios glitch because in 4670k only the dimm 1 and dimm 2 or dimm 1-2 (t...

I'm trying to install iCloud on my PC running Windows Vista with Service Pack 2 and I get a message that the set up program is not a valid win32 file.

I'm trying to install iCloud on my PC running Windows Vista with Service Pack 2 and I get a message that the set up program is not a valid win32 file. Can anyone help me with this?

What is the exact error message?

How to run the Servlet program?

hi, all, I am new to servlet, and I want to know how to run the servlet program. I got the TomCat and Java JDK install in my computer, something else I need for create and run the servlet program?

no that is all u need to run servlets. u can try few of the servlets that come with tomcat

I need to configure a new hard disk as backup disk for time machine. The set up program is running and it says it will take 9 days to backup about 56 GB. Is it normal ?

I need to configure a new hard disk as backup disk for time machine.
The set up program is running since two hours and it says it will take 9 days to backup about 56 GB.
Is it normal ?

Roberto 17 wrote:
I started this morning at 12 and after 5 hours now the backup is about 6 GB up on 56 GB.
The new HD is a WD My Passport Edge 500 GB capacity
5 hours to do 6 GB of transfer is NOT normal, even for USB 2.0 so there's something wrong here. I'd say cancel it, wipe the drive and then test the integrity of the drive. Do some file transfers over to and see if it's behaving normally. It could be a bad USB cable, it could be a bad drive or bad enclosure. As it's new, I suspect you haven't really put it through its paces yet and it's important to do that first before commissioning it to serve as your "reliable backup."

How to use the set functions effectively in webi ,please let me know with detail

how to use the set functions effectively in webi ,please let me know with detail

Hi,
we use use set functions on heirarchies with aggregate functions mostly .
If you include member_set, Min returns the minimum value of the aggregated data for all members in the member set.
Member_set can include multiple sets separated by semicolons (;).
The list of member sets must be enclosed in {}.
If the member set expression does not specify a precise member or node, the hierarchy referenced must be present in the table, then the member set expression references the current member in the hierarchy in the table. If the hierarchy is not in the table, the function returns the message #MULTIVALUE.
Eg .
1)     Ancestor
=Sum([YTD] ; {Ancestor([Test Hierarchy];2)})
2)     IsLeaf
=[Test Hierarchy].IsLeaf
You can use this function when you want to show your Measure only at lower level .
3)     .Depth
=[Test Hierarchy].Depth
This is also function used with hierarchy to find Level of Members .
Follow this link for PDF reference .
Page 147
https://www.google.co.in/url?sa=t&rct=j&q=&esrc=s&source=web&cd=2&cad=rja&ved=0CDIQFjAB&url=https%3A%2F%2Fhelp.sap.com%2Fbusinessobject%2Fproduct_guides%2Fboexir4%2Fen%2Fxi4sp5_ffc_en.pdf&ei=nBAUU-iUM4WWrAeMuoCoDg&usg=AFQjCNHakXsEjd_yUk2y3lVdibf3PXpEOA&bvm=bv.61965928,d.bmk
search on SCN this question was discussed before also one those links .
http://scn.sap.com/thread/3183380
Hope this will help you .

How to run the package programs in eclipse ?

hi all,
how to run the package programs in eclipse ?
plz clarify...
regards
balakrishna.m

package source code is
package package1;
public class ClassaA
          public void displayA()
               System.out.println("class A");
     }java source code is import package1.ClassA;
     class Packagetest1
          public static void main(String args[])
               ClassA objectA = new ClassA();
               objectA.displayA();
     }if i write the notepad means its executing successfully..
but in eclips is not working..
plz help me..

[svn:bz-trunk] 18814: Add manual test for BLZ-594 with instructions on how to run the test.

Revision: 18814
Revision: 18814
Author:   [email protected]
Date:     2010-11-24 09:31:56 -0800 (Wed, 24 Nov 2010)
Log Message:
Add manual test for BLZ-594 with instructions on how to run the test.
Ticket Links:
    http://bugs.adobe.com/jira/browse/BLZ-594
Modified Paths:
    blazeds/trunk/qa/apps/qa-manual/WEB-INF/flex/remoting-config.mods.xml
Added Paths:
    blazeds/trunk/qa/apps/qa-manual/WEB-INF/src/test/
    blazeds/trunk/qa/apps/qa-manual/WEB-INF/src/test/RpcTest.java
    blazeds/trunk/qa/apps/qa-manual/bugs/BLZ-594/
    blazeds/trunk/qa/apps/qa-manual/bugs/BLZ-594/BLZ-594.mxml
    blazeds/trunk/qa/apps/qa-manual/bugs/BLZ-594/readme.txt

You do have a very complex looking site and may need several tables in mysql to handle all that data. If you knew to phpmysql I would suggest taking a look at this tutorial it will help get you started in understanding how to $_GET info from a database and also how to $_POST data to a database. I am no expert just learning myself and I found this very helpful. This is the link http://www.adobe.com/devnet/dreamweaver/articles/first_dynamic_site_pt1.html
There are also many tutorials on Youtube to help build a CMS Content Management Site I would suggest the following: -
http://www.youtube.com/user/phpacademy
http://www.youtube.com/user/betterphp
http://www.youtube.com/user/flashbuilding
And many more on my channel here
http://www.youtube.com/user/Whisperingonthewind
CMS's are easier to maintain, add edit and delete content.
I have also recently bought a Book by David Powers Training from the Source very helpful.
Anyway hope you get it sorted.

HT2477 Just bought a Mac book and the set up is with the Voice over key commands,how do you switch this off as it is painfull to use and use the scroll pad

Just bought a Mac book and the set up is with the Voice over key commands,how do you switch this off as it is painfull to use and use the scroll pad?

It's the button (key) that is labelled Control.
Each of the modifier keys and similar keys has its own symbol; this makes listing command keys easier to do. The Command key is usually the only key which has its symbol printed on the key. If you open Keyboard Viewer (in the Input menu, the one which displays the flag in the main menu bar), you can see what symbol refers to which key.

How to run the programes in NetBeans

any body know how to run the java progarm in NetBeans.
can u please guide me?
Advance in thanks

thanks for ur reply.
this is my code.
public class sample11 {
/** Creates a new instance of sample11 */
public sample11() {
public static void main(String args[])
System.out.println("nithya");
i did watever u told. but i don't have o/p. wat can i do? how to it display the o/p?

How to run the set-up program with a brand new X200?

Similar Messages

Maybe you are looking for