How to run the setup tables in CRM for 0CRM_LEAD_I datasource.

Hi all,
How to run the setup tables in CRM for 0CRM_LEAD_I datasource.
what is the tcode and steps to follow.
Thankyou.

you dont have to do set up tables for 0CRM_LEAD_I.
run the init infopack in BW and then subsequent delta's

Similar Messages

How to restrict the change access in CRM for OLTP orders

Hi Guru's,
Please let me know how to restrict the change access in CRM for the orders that are created in ECC. The ECC orders will only for display in CRM but not for change,
We have the orders that are created in ECC, it will flows to CRM and should restrict the access to get in to the change mode in CRM but as of now CRM system is allowing change mode for ECC orders and ending up with errors.
Is there any additional middleware parameter that needs to be added to SMOFPARSFA table to get this functionality! Please advice! Thank your for your help.
Regards
Suneel

Hi.
You can use the PFCG role to control if the user is able to create, change, delete or only display a business transaction type.
Regards.

How to initialize the setup table for GTMuFF08Global Trade ManagementuFF09?

hi experts,
I can find the datasource of GTM like 2LIS_46_SCL, 2LIS_46_ITM with rsa6.
But when I use rsa3 to do test it, nothing found. I try to initialize the setup table, but I can not find it under SBIW.
Please help me, many thanks.
Brgds/steve

Hi
These Data Sources are from LOGISTICS Try at Tcode.LBWE --Logistics **** Pit.
Here is LO Cockpit Step By Step
LO EXTRACTION
- Go to Transaction LBWE (LO Customizing Cockpit)
1). Select Logistics Application
       SD Sales BW
            Extract Structures
2). Select the desired Extract Structure and deactivate it first.
3). Give the Transport Request number and continue
4). Click on `Maintenance' to maintain such Extract Structure
       Select the fields of your choice and continue
             Maintain DataSource if needed
5). Activate the extract structure
6). Give the Transport Request number and continue
- Next step is to Delete the setup tables
7). Go to T-Code SBIW
8). Select Business Information Warehouse
i. Setting for Application-Specific Datasources
ii. Logistics
iii. Managing Extract Structures
iv. Initialization
v. Delete the content of Setup tables (T-Code LBWG)
vi. Select the application (01 u2013 Sales & Distribution) and Execute
- Now, Fill the Setup tables
9). Select Business Information Warehouse
i. Setting for Application-Specific Datasources
ii. Logistics
iii. Managing Extract Structures
iv. Initialization
v. Filling the Setup tables
vi. Application-Specific Setup of statistical data
vii. SD Sales Orders u2013 Perform Setup (T-Code OLI7BW)
        Specify a Run Name and time and Date (put future date)
             Execute
- Check the data in Setup tables at RSA3
- Replicate the DataSource
Use of setup tables:
You should fill the setup table in the R/3 system and extract the data to BW - the setup tables is in SBIW - after that you can do delta extractions by initialize the extractor.
Full loads are always taken from the setup tables
Hope it helps

How to find the data table sin CRM 4.0

Dear Guru's
I want to know where can i get all the data tables in crm 4.0 for example if i want to know the data table for the Reason in activity Management.with the help of data table only the ABAP people can work.....na
Points willbe given
With Best Regadrs
Sreeram Raghu

Hi Raghu,
There are many techniques in which you could find the database tables, few of them are given below:
- Place your cursor in the field for ex: reason in activity and press F1
- In F1 screen(performance assistant), Click on Technical Information (fourth button from left), you can find here the database table name.
Another Option:
- Go to transaction SE11
- In Database Table Field type few letters, for example to find all the activity table type * act * and then press F4, all the tables related to activity will be displayed
Wish this was useful to you
regards
Srikantan

How to run the same procedure in parallel for different parameter value.

Hi There,
I am currently working on extracting data in to flat file and I am able to do so for one revenue month (e.g. 200101) using PL/SQL procedure(get_rev_data). it takes almost 1 hour to execute the procedure completely and it generates 400 MB data file. Now I have to run this procedure for last 10 yrs of data (i.e. 120 revenue months) . my prolem here is to figure out a way/logic in such a way that I can run the procedure in parallel for each revenue month and at the same time it will write the data in respective data file for each revenue month. so the final result of this exercise would be 120 flat files, one for each revenue month with file names like
EXTRACT_00001001 to EXTRACT_00001120.
where
first five digits : 00001 will indicate the Extract run number and
last three digits : 001 will indicate the thread number for each run.
I am thinking of doing this by creating a table "RevMonth" with two values (revenue_month, thread_num) and calling the procedure in a simple select statement and passing revenue_month as parameter of the procedure like
SELECT get_rev_data(revenue_month, thread_num)
FROM REVMONTH;
But I am not sure if that will do the needful. Any idea on how to achieve this will be of great help. Thank you.

Hi Smit,
Thanks for the advise. I am not planning to run for all 120 months at once. actually I am planning to run like 1 year (12 revenue months at a time). I am not sure if that will work well but I was planning to run this through shell script (Unix) and will call the same procedure with different parameter (revenue_month and Thread_number) values and see what happens. I hope that will run in parallel for each revenue month.
Let me know if you have more knowledge about it. THanks a lot.
Thanks,
.

How to populate the condition tables of CRM 7.0

Hello Friends,
How to populate values in CND* tables , i assume these are the tables that hold the conditions.
Thanks and Regards,
Vasu

Hi,
if you refer to CND* tables those are tables involved in the condition master data exchange between ERP and CRM (on CRM side). Actual condition tables for pricing related condition records start with CNC*. In the help there is a documentation of the condition master data tables for pricing available: http://help.sap.com/saphelp_crm70/helpdata/EN/0e/91f9392486ce1ae10000000a114084/content.htm
Hope this helps.
Best Regards,
Michael

How do I re-run the Setup Assistant in iPhone 5?

Just got an iPhone 5 (Sprint is carrier). I backed up via iCloud the old phone iPhone 4s. Afterwards, I reset the iPhone 5, went through the motions but did not download the complete backup. So I re-set again and was able to retrieve the iTunes backup but now, I want the setup assistant so I can restore from iCloud
Already activated new phone 5 from iphone 4s. However, I don't know how to re-run the setup assistant in order for me to restore from iCloud backup. I also don't know where restore from iCloud backup is located at. Help! Don't know iPhone too well, this is my daughter's phone. Any help would be appreciated. Thanks.

You can restore a backup only by using the iOS Setup Assistant.
iOS: Back up and restore your iOS device with iCloud or iTunes

How to fix the finacial tables

Hi
How to fix the financial table using script, (for example see below table. i have fixed manually, my document having more than 50 tables)
%, ) are hang aligned.
$ are left aligned as like below.
Regards,
Velu

Hi,
You can find number of Postings in SDN, please search......
Re: Filling Setup Tables
Thanks
Reddy

How to fix the financial table using script

Hi All,
How to fix the financial table using script, (for example see below table. i have fixed manually, my document having more than 50 tables)
%, ) are hang aligned.
$ are left aligned as like below.
Regards,
Velu

Hi Velu
The quality of your screenshot came out pretty bad
Maybe send another higher resolution one which on a smaller part of the table and show the hidden characters

SETUP tables not filling for 2LIS_02_ITM

Hello all,
I am trying to run the SETUP process from OLI3BW for few Purchasing doc's
But I do not see any entries in the setup table 'MC02M_0ITMSETUP' after the SETUP run.
and Yes,I have DELETED setup tables data prior to running the Setup process.
I did make sure DS,Extract structure are active and also 2LIS_02_ITM is active in RSA7 .
I could not find any Info on this kind of issue in SDN.
Any help is much appreciated !
Thanks,
Jb

Yes, I did check RSA3,RSA6 and LBWE .
LBWE has active DS for Item/Hdr/Scl(with Green light) and RSA6 has active DS's
But RSA3 has 0 records since SETUP process itself did not run and no data in SETUP table to pull from RSA3.
I schedule the job in the back ground and seems the job runtime was too short with no proper log.
Here are the messages from the Job log.
11:51:49 Job started                          00           516          S
11:51:49 Step 001 started (program RMCENEUA, variant &0000000000016, user name   XXXXXX)   00           550          S
11:52:00 Job finished                                                                        00           517          S
I am confused as whats happening here,I did not encounter such problem before doing SETUP's for Billing etc.
Thanks,
Jb

Problem while filling the Setup Table for the DS 2LIS_02_SCL.

Hi All,
When I am trying to fill the Setup table for the DataSource 2LIS_02_SCL and only for one specific Purchase Order, it is showing me a message like
u201CDataSource 2LIS_02_ITM contains data still to be transferredu201D
I have deleted the Setup Table and I want to delete the entries from SM13, but I do not have Authorization.
Also, here I am trying to fill the Setup Table for 2LIS_02_SCL and not for 2LIS_02_ITM, but the message displayed above is showing as 2LIS_02_ITM DataSource. I think the Setup Table will be same for both the DataSources.
Waiting for your valuable inputs.
Thanks in Advance.

Hi,
When you want to fill the setup tables first you need to delete setup tables to avoid the duplicate entires in setup tables ( you can delete the setup tables by using t.code LBWG with application no is 02)
In your case, the data souce is 2LIS_02_SCL for purchasing.
when you want to delete the setup tables by using t.code LBWG with 02 application no it will delete all the purchasing related data from all the data sources like
2LIS_02_SCL
2LIS_02_ITM
Before the deletion of setup tables you need to clear the delta Queues and stop the V3 jobs, which loads the data to Delta Queues (RSA7) and Update tables(LBWQ).
you need to run the V3 jobs manually by using LBWE > Job control > and schedule the jobs until the delta queues will get 0 records. that means no data will be available in RSA7 and LBWQ
go to SM37 to see the jobs LIS-BW-VB_APPLICATION_02,
once the delta queues gets 0 records by running V3 Jobs manullay.
Then remove the released state jobs > remove from schedule means delete the jobs in LBWE > Go to job control > you can delete the released jobs.
Becuase No postings to be done in application tables, while running setuptable filling you should take some down time to fill the setup tables.( OLI*BW) *=Application number.
Once you clear the Queues and delete the v3 jobs, then you need to fill the setup tables after deletion of setup tables.
once you fill the setup tables , by running intialization to BW side the delta Queue is formed for the data source in R3 side
Now the postings can be done in R3 side, so you need schedule back the V3 jobs, which you already delted from LBWE to load the data from application tables to RSA7 or LBWQ.
I hope this may help yoou.
Regards.
Rambabu
Edited by: Rambabu velanati on Jun 9, 2010 4:41 PM
Edited by: Rambabu velanati on Jun 9, 2010 4:52 PM

Adding custom fields to the condition table in CRM

Hi all,
Our requirement is to download the sales conditions type from R3 to the CRM system. In one of the condition table we are trying to add shipping point( VSART ) and Special processing indicator (SDABW).
For that we have added the fields in the structure CND_MAPT_ACS_REM_CUST (Comm. Structure Condition Exchange Customer Exit R/3 Fields) and we have added the fields in the field catelog in transaction ( /SAPCND/CTCT - Maintain Condition Tables). Then we have mapped these fields in the view V_CND_MAP_CNVFLD.
Finally we run the adapter object of that particular table to download the details from R3, but the condition table in CRM is not getting activated, so the adapter object is giving the error.
Please help in this.
Thanks & Regards,
Raghuram.

Hello Raghuram,
I feel that your issue is similar what i have faced, refer to my post:
Link: [Issue in customer specific price;
For solving this you can refer to detailed steps in, Note 514952 - Download of customer-specific tables.
Also additionaly you may need to run the report /sapcnd/rv12n001, as i also had to do so.
If not solved then let me know the relevant message in SLG1
Regards

How to run the query in screen painter

i am using the patch 36 in business one so pls give information about
how to run the query in screen painter
regard
sandip adhav

Hope u have reached Screen painter interface,
1. Click 'Add Grid' from tool bar.
2. Go to 'Collections' tab in 'Properties' window.
3. Choose 'Data Tables' from the Drop down list.
4. Click 'New' found at the bottom of the Properties Window(same window)
5. U'll find the place to insert ur query.
6. U can rename the table name from 'DT_0'
7. Choose type as 'Query'
8. Clear content from box 'Query'
9. Enter ur query there. Dont forget to Click 'SET'
10. Go to Preview option from tool bar.
now ur query will be displayed as table format.
Note: First try with simple query b4 going for linking option.
Regards,
Dhana.

How to run the payroll in Quality server..Unable to exit the payroll record

HI Experts,
In my Quality server the current payroll period is 6 ---2006.
For testing purposes i want to run the payroll for next periods.
Here i am unable to exit the payroll.It is showing message that payroll has not been run successfully for all personnel numbers.I have struck up here.
How can run the payroll for the next period.
Please advice me to run the payroll for later periods...
Thanking U.
Sairam.

Hi Vicky,
That is ur master data and time data is not correct, the rejected personnel no. should with the correction flag.these personnel no are stored in too called matchcode W, so u have to change the master data and time data fot that perticular personnel no. and agian release for payroll.
if any changes required in customizing tables rather than ur infotypes then let me know.
Hope this will give u an idea
reward points if helpful
Srinivas

Problem in filling up the setup tables for 2LIS_11_VAHDR (All SD Data sources)

Hello All,
I have been trying to fillup the setup tables for SD datasources( Application-11 Ex:2LIS_11_VAHDR), but it was not allowing me to do that.
Below are the steps i have followed,
1.Deleted the setup tables using tcode-LBWG- Application-11
2.Cleared the queues in RSA7 and found 0 queues for 2LIS_11_VAHDR D.S by triggereing the I.P till it get zeroes.
3.Checked the data in RSA3-No data found.
4.Filling the setup tables using OLI7BW t-code, got a popu(Data for 2LIS_11_VAHDR has to still transfered)
Do i need clear all the queues for SD-Billings,Orders e.t.c since i have 8 data sources to be cleared apart from 2LIS_11_VAHDR .
Could you please suggest any other option to fillup the setup tables.
Regards,
Siva

Did you run the infopackage twice pertaining to 2lis_11_vahdr.One for delta and another time for repeat delta.As delta queue will hold the records in repeat delta mode as well.
Also in case of Direct Delta --Data is transferred to Base tables and delta queue (RSA7) at the same time.So extraction queue (LBWG )and update tables(SM13) does not come into the picture.
Regards,
AL

How to run the setup tables in CRM for 0CRM_LEAD_I datasource.

Similar Messages

Maybe you are looking for