How to run the variable exit without calling the variable selection screen?

Hi all
I have a query with 2 variables 0P_PRQUA (Previous Calendar Quarter (SAP Exit)) and ZCCDAT02.
ZCCDAT02 is a Key Date variable that is derived based on the last day of the quarter that is entered in 0P_PRQUA. The exit code works correctly when calling up the variable screen and ZCCDAT02 is derived properly.
The problem is that 0P_PRQUA is set to "Can be changed in query navigation". So if the user changes the value of the quarter the exit is not triggered and the value of ZCCDAT02 does not change.
Is it possible to trigger the exit or is there another way to do it? Ideas would be appreciated. I am trying to create a Web Template with a Dropbox box for the Quarter.
Query is written in BW 3.X.
Regards
Chami

Hi guys
Just to restate the requirement. I want the user to be able to change the value of the variable, WITHOUT calling the variable selection screen.
I want the user to be able to change the value of the quarter by using a dropdown box from within the web template. Once that is selected I want the value of ZCCDAT02 to be derived from the new value of the quarter.
Regards
Chami

Similar Messages

The user exit EXIT_RFEBBU10_001 calls (the transaction FEBAN)

Hi,
we are using FEBAN transaction. Some customization was required to modify FEBEP/FEBRE fields.
While implementing this in EXIT_RFEBBU10_001 it was noticed that this exit is called for all unprocessed lines from the bank statement, NOT only for the item we have chosen to post.
e.g.
the bank statement has unprocessed 20 lines and we would like to post only one of them. this exit is called 20 times in spite of the fact that we have choose posting only 1 line in the FEBAN.
I was not able to identify in this user exit the items we are actually posting with FEBAN and ignoring all other unprocessed items from the same bank statement.
the R_KUKEY is being passed to rfebbu00 and to the exit but I couldn't find where to get ESNUM of the item being posted?
Is it actually possible to do?
thanks
victor

Thanks, Martin!
but I am afraid I was not clear in my question.the EXIT_RFEBBU10_001 works less or more fine for us when called from the FEBAN. (the 2nd step, i.e. postprocessing after uploading) .
while doing unit testing I was only concerned that when a user is trying to post one line from the statement with FEBAN this exit is called for all unprocessed lines from the same statement and I was not able to identify the line the user is actually posting (which, in my opinion, may prevent posting the whole bank statement if the data in one line is not consistent with the logic programmed in the exit ).

I have an apple emac powerpc G4 which is running 10.3.9 software. I downloaded the 10.5 leopard software. Does anyone know how to install the 10.5 without using the dvd installer? In dummy terms please?

If any one could help me with this. i'd be enternally grateful as i'm getting nowhere on my own!
I have an apple emac powerpc G4 which is running 10.3.9 software. I downloaded the 10.5 leopard software. Does anyone know how to install the 10.5 without using the dvd installer? In dummy terms please

The only way to get 10.5 is to purchase it on CD. Such as http://www.amazon.com/Mac-OS-Leopard-10-5-10-51/dp/B0012RAVRC where is being sold for $179.99.
If your optical drive is broken, you will either need to replace it or get an external. There is no other way.
Why do wish to upgrade? As you can see it is going to be expensive, probably more the Mac is worth.
Allan

How do I cancel my annual membership within the first month without calling to their phone?

I want to cancel my annual membership during the first month, but I can not call to their phone. Anybody has a solution? Thanks.

Hi,
thanks, but their instructions lead you to contact them, and I can not call them.
Am 06-Nov-2014 12:42:38 +0100 schrieb [email protected]:
HOW DO I CANCEL MY ANNUAL MEMBERSHIP WITHIN THE FIRST MONTH WITHOUT CALLING TO THEIR PHONE?
created by Kartikay_Sharma in _Creative Cloud Download padding: 10px; margin-top: 20px;">
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6904898#6904898
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the STOP EMAIL NOTIFICATIONS LINK.
Start a new discussion in Creative Cloud Download & Install by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

How to delete confirmed schedule lines, without executing the ATP check?

Sales and Distribution: Concerning ATP (product allocation)
Situation:
Step 1: An order is created with priority low. Quantities are confirmed for line items.
Step 2: A second order is created with a higher priority. No confirmed quantities.
Rescheduling program (SDV03V02) is then executed. This selects and sorts the orders in the correct order.
The confirmed quantities for the first (low priority) order should now be freed up, to be able to allocate those quantities to the second (high priority) order.
The problem I am facing is that the confirmed quantities are NOT released.
We cannot use BAPI_SALESORDER_CHANGE or SD_SALESDOCUMENT_CHANGE to delete or modify the schedule lines, because these function modules execute the ATP check again. And when that happens, quantities are again confirmed and assigned.
How can we get rid of the confirmed schedule lines, without executing the ATP check?
Thanks,
Edwin.

Found a solution to the problem:
In the Rescheduling program we export a parameter to the memory, to make it possible to delete schedule lines without executing the ATP check.
Deleting of the schedule lines is done with a BAPI, which will call the ATP check automatically for ATP relevant materials. This we want to stop from happening (only when calling the BAPI).
After the BAPI has been called we FREE the MEMORY ID.
The parameter is imported again in Customer-Exit EXIT_SAPLATPC_001.
Transaction.. SMOD
Enhancement.. ATP00001
Component.... EXIT_SAPLATPC_001,
Include...... ZXATPU01.
The customer exit is used in function AVAILABILITY_CHECK_CONTROLLER, just before calling function 'AVAILABILITY_CHECK'.
Simply refreshing the ATP tables in the customer-exit, will prevent the ATP check from being executed (because we removed the list containing the materials for which the ATP check needs to be done). As a result, the function 'AVAILABILITY_CHECK' will not be processed.

I had creative cloud installed in a parallels deskto virtual machine on my mac, I delete the virtual machine without deactivate the creative cloud. after reinstall a new VM running windows 8.1. pro 64 bits, I downloaded the creative cloud installer but it

I had creative cloud installed in a parallels deskto virtual machine on my mac, I delete the virtual machine without deactivate the creative cloud. after reinstall a new VM running windows 8.1. pro 64 bits, I downloaded the creative cloud installer but it does not install ang give an Error code 72, it is assuming that I already are using the Creative cloud in 2 computer, but itis no the case, how to solve this situation?

Dave: I did the Microsoft Update two days before this happened, and rebooted as required. I just created a new restore point and lauched Creative Cloud. Now I get the famous white screen:
It just sits and spins (been 10 minutes now).
Fortunately, I saved away this command (which I've had to use 4 or 5 times already):
del %USERPROFILE%\AppData\Local\Adobe\OOBE\opm.db
Unfortunately now, I get this (even after closing the above window):
The process cannot access the file because it is being used by another process.
So I killed everything that said "Adobe" in the task manager and this time, the command succeeded.
Fortunately, the current apps seem to still work. I can't seem to find the "Creative Cloud" app in the applications on my system, but I launched Photoshop CC, told it to look for updates, and got a list of the 5 prgorams that need updates in the Adobe Application manager:
I will proceed with the updates, holding my breath.

How to launch a function/procedure without suspending the parent process?

Hi everybody,
I would like to know if I can define something as follows in PLSQL:
procedure master
begin
call a procedure_child;
End master;
I would like that the procedure master does not suspend the execution and wait that the procedure_child finishes in order to resume the executions with the further code.
Thanks a lot in advanced
Tomeu

In the future, please stick to posting in a single forum.
Re: How to launch a function/procedure without suspending the parent process?

I had a trial version of Pages for 30 days and then purchased the actual software without removing the trial. Now when I try to edit documents and save them it wont because it tells me I am using a trial version.... How can I remove the trial version?

I had a trial version of Pages for 30 days and then purchased the actual software without removing the trial. Now when I try to edit documents and save them it sometimes wont because it tells me I am using a trial version.... But sometimes it lets me!! How can I remove the trial version? I cannot tell which one I am using when I open it....

Question asked and answered quite once a week.
Go to my iDisk (address below)
and download :
For_iWork:iWork '09:uninstall iWork '09.zip
Run it then reinstall the purchased software.
Yvan KOENIG (VALLAURIS, France) vendredi 2 janvier 2011 16:21:41
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : <http://public.me.com/koenigyvan>
Please :
Search for questions similar to your own
before submitting them to the community

My Mac seems to be running slow, and what I call the rainbow wheel runs longer than I think it should.

My Mac seems to be running slow, and what I call the rainbow wheel, runs much longer than I think it should.

Step by Step to fix your Mac
Why is my computer slow?
Most commonly used backup methods
If you get pinwheels when off the Internet, it coudl be a failing boot drive or just a few bad sectors as it has a hard time reading from it.
This is a possible cure, it's a lot of work though.
Reducing bad sectors effect on hard drives
How to erase and install Snow Leopard 10.6

How to getFocus in a ComboBox without choosing the inside data?

How to getFocus in a ComboBox without choosing the inside data? Once I clicked on the ComboBox, I couldnt get the focus unless I choose the data inside. Although I had tried with many different types listeners, but still couldnt get it. Could anyone help me???

It is easier to work with the JComboBox in 1.4 for what you want to do.
But try this and see if it works for you. I added a FocusListener to all the other components on the panel, and had them close the combo box popup list. Now, if another component previously had the focus, it would take 2 clicks to have the combo box's list pop up. It's quite round-about, but it seems to work.
I also printed a message on the console.
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
import javax.swing.event.*;
public class ComboBoxPopupTest
   public static void main( String [] args )
      final JComboBox comboBox = new JComboBox( new Object [] { "one", "two",
                                       "three", "four" } );
      JButton button = new JButton( "huh" );
      JButton button2 = new JButton( "Yo, baby!" );
      final JPanel panel = new JPanel();
      final Runnable hidePopup =
         new Runnable()
            public void run()
               // This method is deprecated in 1.4.
               // But you won't need it in 1.4 anyway...
               Component comp = SwingUtilities.findFocusOwner(panel);
               if ( comp != null )
                  if ( comp.getClass().toString().indexOf("ComboBox") > -1 )
                     comboBox.setPopupVisible( false );
                     System.out.println( "helloooo comobox" );
         }; // end the Runnable
      FocusListener focusListener = new FocusAdapter() {
         public void focusLost( FocusEvent evt )
           SwingUtilities.invokeLater( hidePopup );
      // In Java 1.4, just add a focus listener to the combo box
      // instead of adding it to all the other components.
      button.addFocusListener( focusListener );
      button2.addFocusListener( focusListener );
      panel.add( comboBox );
      panel.add( button );
      panel.add( button2 );
      JFrame frame = new JFrame( "Hello" );
      frame.getContentPane().add( panel, BorderLayout.CENTER );
      frame.setSize( 400, 300 );
      frame.setDefaultCloseOperation( JFrame.EXIT_ON_CLOSE );
      frame.setVisible( true );
}Tell me if that works for you.

HT201240 I've forgotten my administrator password and can't download software. can anyone advise how to reset a new password without having the original?

I've forgotten my administrator password and can't download software. can anyone advise how to reset a new password without having the original?

Forgot Your Account Password
For Snow Leopard and earlier
     Mac OS X 10.6- If you forget your administrator password
For Lion/Mountain Lion
    Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     When the menubar appears select Terminal from the Utilities menu.
     Enter resetpassword at the prompt and press RETURN. Follow
     instructions in the dialog window that will appear.
     Or see Reset a Mac OS X 10.7 Lion Password and
     OS X Lion- Apple ID can be used to reset your user account password.
If you are unable to boot from an installer DVD:
(these will only work on Leopard or earlier)
1. Boot to Safe Mode by restarting and after the chime press and hold down
      the COMMAND-S keys until a black screen with white type appears.
2. At the prompt, type the following commands pressing return after each
      command line:
     /sbin/fsck -yf
     If you do not receive a "Filesystem OK" message then repeat this command
     until you do. If after seven tries you still do not receive a "Filesystem OK"
     message, then the system is corrupted and needs to be reinstalled.
     mount -uw /
     cd /private/var/db/netinfo
     mv local.nidb local.old
     rm ../.AppleSetupDone
     shutdown -r now
The second-to-last command above will cause OS X to think that the operating system is newly installed, and when the new owner starts up the computer it will send him/her to the startup wizard where he/she can start a new user without reinstalling.
This last method does not actually change a password. It simply removes the user accounts and lets you create an initial admin account as if the computer were new out of the box.
Reset Admin Password Using The Terminal
You can reset the password by printing out (or writing down) and carefully following these steps.
First, find the short name of the admin user on the machine. The easiest way of doing this is by looking at what the directory is called in the Users folder.
Now, start in Single-user Mode. It should boot into a command line.
Enter these exact lines. Press RETURN after each.
mount -uw /
ifconfig lo0 up
cd /var/db/netinfo
netinfod -s local
Now you'll need that short name. Enter "passwd", a space, and the short name of the admin. For example, if the admin was rather prosaically called "imadmin", you would enter "passwd imadmin".
The computer will now prompt you to change the password for "lmadmin" (or whatever the short name was). Go ahead and enter a new password.
Now, enter:
sync
reboot
and the machine will reboot. The admin password should now be changed.

I have three iPads and one iPod and one iPhone. How can I message between them without sending the message to all of them. You send the message to your email address but all of them are set up und one account.

I have three iPads and one iPod and one iPhone. How can I message between them without sending the message to all of them. You send the message to your email address but all of them are set up under one account.

You can have a different receiving email in the Messages app on each device : Settings > Messages > Receive At . I'm not sure that there is a different way to have the message only go to one device.

BPM Idoc collection without calling the mapping in BPM

Hi Expert,
I have an IDOC to file scenario in which source side I have to collect multiple IDOC and map it to a single file .I am achieving it through BPM . at present I am using one multimapping and calling this mapping in the BPM under transformation step its working fine but due to some constraint , Now I want to achieve it using BPM but without calling the Mapping in the BPM i.e I don't want to use Transformation step in the BPM. Is it possible ????
Regards,
Saurabh

Hi Saurabh,
If that is the case it is preferable to collect the IDocs in ECC and then send them to XI at one go.
Cheers !
Lokesh

I want to download an audiobook, but my daughter has a giftcard credit on the account. How can I download my audiobook without using the money from her giftcard?

I want to download an audiobook, but my daughter has a gift card on the account. How can I download my audiobook without using the money from her gift card?

go directly to your ibook app. and you're going to find it. it's only with ibooks app.
best
Olivier
<Edited by Host>

I have 2 ipod touches. I backed up the new one with old's info. The old one will not unlock with the password I had wrote down and I tried my new ones password. How can I reset the old ipod without affecting the new one and how can I unlock the old one?

I have 2 ipod touches. I backed up the new one with old's info. The old one will not unlock with the password I had wrote down and I tried my new ones password. How can I reset the old ipod without affecting the new one and how can I unlock the old one?

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software

How to run the variable exit without calling the variable selection screen?

Similar Messages

Maybe you are looking for