How to run two instances of WoW on a Mac?

So I am looking to run two windows/instances of WoW on my mac. Basically so I can use my mage on a seperate account to rush my lowbies through instances. It wont let me simply load the game twice like on a PC, does anyone have any ideas how I could do it?

I've never played WOW so I do not know how the settings are setup on a Mac but one way that you might be able to do it is to create a second account and try running it in both accounts. Go to System Preferences/Accounts and click on the plus to create a new account. Next click on Login Options and put a check in the box that says Enable Fast User Switching. Then from your Finder in the top right hand corner you will be able to switch between your 2 accounts.

Similar Messages

How do run two instances of a LabView program

Hi,
I have a LabView application that is used for RS-485 diagnostics with a 2-port PCMCIA card in a laptop. The application is written to access only one of these ports at a time, although the user interface does allow the user to choose which one. What I need to do is to run two instantiations of this application, accessing one port per application, yet keeping them completely independent. How do I do this?
So far, I have complied an executable application, but they don't seem to be independent. Could it be that opening one port interferes with the other. Also, renaming the app doesn't seem to work. It does seem clear that I have to run a compiled application because I can't run the same VI with the same subVI's independently within LabView.
Thanks,
Jason

Jason,
Here are a couple of things to think about:
To run within the LabVIEW environment you could make the subVIs reentrant. This creates a separate data space for each instance of the VI. It does, however, mean that you cannot use the subVI's front panel.
The built executables share the LV run time engine so there may be resource contention when you try to open the second port.
I think you should be able to write a program in LV using VIs without reentrancy that will do what you want. Try a simple program which opens Port 1 and then Port 2 using the standard communications VIs (VISA?) and checks for errors. Multiple port stuff is done all the time. Unless the PCMCIA card does not support it. If this works then you could put together a program which monitors both ports as a single port and the port number is a parameter.
Lynn

How to run two instances of weblogic server as an NT service on the same machine

I have to have two instances, one I want to use it for development(testing
purposes) and the other one I need to use it as a live one(Production)
So that I can test my applications independently without disturbing the live
application.
Thanks
Madhu

I can start one instance as an NT service, but the other instance, I have to
start with the command. I need to run as an NT service because I need to
use NTRealm
Security
I have created a new domain , server listening to different port.
Thanks
madhu
Bruce Blackshaw <[email protected]> wrote in message
news:[email protected]..
"m holur" <[email protected]> wrote in message
news:<3c0d2b66$[email protected]>...
I have to have two instances, one I want to use it fordevelopment(testing
purposes) and the other one I need to use it as a live one(Production)
So that I can test my applications independently without disturbing thelive
application.I would not recommend having development and production on the same
machine.
But if you wish to do so, you can create multiple domains under the
same installation, say one for dev and one for prod. On the same
machine make sure they listen on different ports. This, of course,
ties you to the same version for development and production - making
it impossible to upgrade just one.
You may be able to do two completely different installations (i.e.
different BEA HOMEs) on the same machine - I haven't tried this but it
looks possible. This would mean you could upgrade each separately. The
presence of BEAHOMELIST in the registry on NT seems to indicate this
should work.
Bruce Blackshaw
Free Java FTP Library
http://www.enterprisedt.com/downloads/ftp.html

Does anybody know how to run two independent instances of Calendar simultaneously?

I've enabled the Debug mode, and have 2 windows open at the same time but can't get them to operate independently. Anybody done this?
The situation is that I work for a music school that uses iCal to keep track of music lessons for multiple tutors in real time, which sync to relevant tutor's iphones. We've just opened a second premises and would like to use the same system, but be able to monitor everything from either school.
Debug mode will let me run two instances of Calendar simultaneously, but removing tutors' calendars from one of the Calendar windows removes them from the other.
Basically I need one Calendar window open for each school, and for them to be independent from each other.
Any takers?

How about creating a new "Calendar" with in the same Calendar app?
Calendar App---> File---> New Calendar
Name each Calendar for each business location. Example if the original location is on Main St, name that Calendar Main St and the second on Broadway, name that calendar Broadway.
The other solution could be the same as above, but File---> New Calendar subscription. But I have no idea how that works though.
KOT

Can we run two instances of solaris in 1 hardware (SunFire Server)

Hi,
There is a need for us to run two instance of Solaris in SunFire Server.
Because we need to install Domino Servers in a Single Hardware.
The hardware consist of Eight Processors.
How to allocate the resource in such a way that the Domino Server should take 4 Processor and other application should take other four.
Please be in more detail.
Regards,
C.Kumanan

"Sunfire" is a product line that includes many different computer designs
and many different capabilities. You will need to be more specific as to what model you actually have.
The Sun Fire Midrange Systems are hardware designs that can be configured
to run discrete domains in the same overall chassis.
So, for those systems the answer to your question would be "Yes".
For any Sun Fire computer syustem that is smaller than the Midrange systems,
the answer to your question would be "No".
So ... A Sun Fire 3800 with eight processors ??? "Yes"
However, a Sunfire V880 with eight processors ??? "No"
Any other configuration questions of the actual Solaris instance,
such as Zones or processor thread affinity are outside the scope of this forum.
Those issues would be discussed better in an OS forum.

How to run two query in the same preparedStatement

Hi all,
Please tell me how to run two queries in the same preparedStatement object ?
In my module I have to run two queries and I don't want to make two methods for running two different queries.
I just want to call this method for both of my queries.
methodName(long param)
Connection conn=null;
PreparedStatement pstmt=null;
//////////////// some coding
Please Help !
Thanks in advance
amitindia

    public void foo()
        Connection connection = null;
        PreparedStatement stmt = null;
        try {
            connection = ...get from pool...;
            stmt = connection.prepareStatement("...");
            ...fetch results...;
            stmt.close();
            stmt = null; // So the finally statement works if there is an exception
            stmt = connection.prepareStatement("...");
            ...fetch results...;
        } finally {
            if (stmt != null) ..close it...;
            if (connection != null) ..return it to pool...;
    }

How to run two versions of dreamweaver at the same time

How to run two versions of any dreamweaver at the same time?
There must be a way to do this.

east99 wrote:
> How to run two versions of any dreamweaver at the same
time?
> There must be a way to do this.
Yes, there is: on two separate computers.
You cannot run two versions of Dreamweaver simultaneously on
the same
computer. They can coexist side by side, but the operating
system will
not let you run them together.
David Powers, Adobe Community Expert
Author, "The Essential Guide to Dreamweaver CS3" (friends of
ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/

Running 2 Instances of Captivate 8 on Mac

I can run 2 instances of Captivate 6 on a PC, but at home I have 8 and I'm on a Mac. When trying to open Captivate again through the Spotlight Search, Captivate would not open again. I did not try opening it through the Applications folder. Is it possible to run 2 instances on a Mac? I'm trying to record a demo of me showing Captivate functions. Thanks!

Thanks for looking into this everybody! I found a solution for Mac users!
Open the Mac Terminal.
Type: open -n -a "Adobe Captivate"
Hit Return.
Type open -n -a "Adobe Captivate"
Hit Return.
The second return opens the second instance of Captivate.
However, it appears as though you may run into issues running 2 instances of Captivate on a Mac. I have not tested an actual recording but as I progress, I will post my results.

How can I run two instances of apache tomcat in the same machine.

Hi
Can I run 2 instances of apache tomcat in the same machine.If yes then how.?

Yes, you can. Just run 2 instances. Make sure that they run on different ports.

How to run two WebLogic server instances on the same machine

The setup is to run server instance A with all EJBs and server instance
B with all servlets.
I edited the weblogic.properties under myserver to include all EJBs and
create server2 under \weblogic parallel to myserver and put a new
weblogic.properties under server2 that has all the servlets aliases.
Is this the right way?
two server ran but I cannot hit the servlet.

The setup is to run server instance A with all EJBs and server instance
B with all servlets.
I edited the weblogic.properties under myserver to include all EJBs and
create server2 under \weblogic parallel to myserver and put a new
weblogic.properties under server2 that has all the servlets aliases.
Is this the right way?
two server ran but I cannot hit the servlet.

How to run two OEM?

Hi All,
I have two instances on one server, "orcl" and "clone"
"orcl" was the default one so Oracle Enterprise Manager is displaying for that instance.
How can I get another OEM for "clone" instance?
Thanks

sb92075 wrote:
How can I get another OEM for "clone" instance?To monitor and manage multiple DBs, you need to license & install GRID ControlTechnically, that is not true. While dbcontrol is designed to manage a single instance, there is nothing to prevent creation of multiple dbcontrols on a single box. I actually have two 10.2.0.4 EE instances on my laptop right now, each with its on dbcontrol. Each control runs on its own port and thus requries a separate url:port combination to reach the oem console.
A few months ago I even had my hands on a ML note describing how to increase the number of ports available for multiple dbcontrols from a default of 19. Poking around ML just now and I can't seem to dredge it back up.

How to run multiple Instances of wls5.1 under one instance

Hello forum,I want to make 3 instance of weblogic that runs under one instance,but
i don't know how.
for example I will like to have the following.
Weblogic is my main instance,so i will like to have more instances called web,db,batch
witch run on their own under.
Weblogic/web,db,batch,
I have made the 4 instance first weblogic has empty weblogic.properties file,
and the otheres 3 have their full weblogic.properties,my problem is how can I
refer eatch instance individually, that means the
subinstances like web,db,batch in my startweb.cmd,startdb.cmd,startbatch.cmd
I don't know how to start eatch instance alone.
HELP

To run more than 1 instance of Logic at the same time, you really need 2 copies as while the license allows you to install on 2 machines (1 laptop 1 desktop ideally), they can not run at the same time.
So, where now? Well there is a legitimate way around this, assuming you have a fast enough network between the 2 computers and that is to have 1 machine running as a Logic Node to share the work out. When I'm not 'Out and about' I could use the MacBook Pro as a node for my home setup (For example) running some of the soft synths for example.

How to run two icalenders on the same computer?

How can i run two separate icalenders on the same computer? I have my own icalender with work, home, etc, and it's totally full. I am now running an artists collective and will publish the collectives icalender on the web. I don't, however, want to mix what will be a pretty busy calender with my own already too full one. Is it possible to run two totally separate calenders on the same computer?
macbook Mac OS X (10.4.8)

trsv,
Welcome to Apple Discussions.
Create two Groups...
Calendar 1:
Work
Home
etc
Calendar 2:
Collective Calendar
You can then switch which groups you wish to display by activating/deactivating the check mark in the Calendar source window.
That will also allow you to selectively publish the Collective Calendar.
;~)

How to install two instance on one server

Dear Guru,
I want to install two instance on one server.
I have installed IDES server ( win 2k3 64 bit with SQL 2005 ECC 6.0)
Drive is
c: 20 GB for os
d: 5 gb swap
e: 5 gb swap
f: 450 GB database.
The same server i want to installed SOLMAN 4.0 with sql 2005.
Please suggest me how to installed without affcting IDES server.
Amol

Hi,
You only have to consider 2 things :
1. SAPTRANSHOST entry in hosts file will be the same for both systems
this mean that both systems will share the same transport directory
Regards,
Wojtek
This is not true. Your SAPTRANSHOST will remain the same, but you can (and should) specify independent trans directories with the DIR_TRANS and and EPS profile parameters to designate where the instance trans files should be located (i.e. /usr/sap/trans_SID). I recommend you make this change in the existing host first, and then clear out the trans directory. Let the 2nd instance install into it and then alter that one too (thereby moving the files to the new /usr/sap/trans_SID2).
Edited by: David Ingersoll on Jan 31, 2008 3:12 PM

How to run two libraries? [11.0.0]

Hey everyone. I've been using iTunes for a long time now, as it is a relatively good program for organizing my huge library> I don't use it to listen to music, but I often need to move files around and onto the appropriate devices for my family. Because of this, I got an external hard drive. From time to time, iTunes will forget that my library comes from my external. usually, this is after booting iTunes without having the external plugged in. This can be a nuisance, because iTunes then decides to fill up my laptop's free space with the large amounts of music I put on at once. It gets especially annoying when I need to consolidate files to ensure they are all on the hard drive because it will consolidate to the computer instead.
My question is, how do I set iTunes up so it will always look for my hard drive and use that as the library first? Then, and only then, if it cannot find my hard drive, it will use my computer's storage. Most important to solving my problem is that during those times it uses my computer's storage, it should automatically use my hard drive if present upon restarting iTunes.
I have figured out how to have two libraries, but I need to know how to put one on a higher priority and as a default that doesn't get changed.
To recap, If I run iTunes without my external hard drive, it changes the library location to my computer and does not put the setting back to how it was.

Aarowaim wrote:
how do I set iTunes up so it will always look for my hard drive and use that as the library first?
This is done by default, but it is up to the user to ensure the external or network drive is connected.
Aarowaim wrote:
Then, and only then, if it cannot find my hard drive, it will use my computer's storage.
Again, this is done by default.
If the user fails to connect the external drive before started iTunes the following steps should be taken.
Close iTunes.
Connect drive.
While holding SHIFT, launch iTunes.
When prompted to locate or create a new library, select locate and point iTunes to the external drive.
Is the iTunesLibrary.itl file actually on the external drive or is it on the C drive of the computer?

How to run two instances of WoW on a Mac?

Similar Messages

Maybe you are looking for