How to run VSAE MP simulator in my workstation

Hi there,
I would like to execute the MP simulator from my VSAE installed in my workstation. I think I should install some dll, but I can't find any information about that.
Thanks in advance.

Hi,
Simulator requires the Operations Manager agent to be installed on the workstation.
http://OpsMgr.ru/

Similar Messages

How to run the iOS simulator from the root account?

sh-3.2# /Applications/Xcode.app/Contents/MacOS/Xcode
com.apple.dt.instruments.backgroundinstruments: Already loaded
2012-05-20 21:57:32.871 Xcode[2538:107] ERROR: Failed to create an alert for ID "enabled" based on defaults: 1
2012-05-20 21:57:34.277 Xcode[2538:107] Error launching simulated application: Error Domain=DTiPhoneSimulatorErrorDomain Code=1 "iOS Simulator failed to install application." UserInfo=0x400e8b820 {NSLocalizedDescription=iOS Simulator failed to install application., DTiPhoneSimulatorUnderlyingErrorCodeKey=-1}
localhost:MacOS root# cd "/Applications/Xcode.app/Contents/Developer/Platforms/iPhoneSimulator.platform/ Developer/Applications/iPhone Simulator.app/Contents/MacOS"
localhost:MacOS root# ./iPhone\ Simulator
com.apple.iPhoneSimulator:com.apple.accountsd: Invalid argument
com.apple.iPhoneSimulator:com.apple.AddressBook: Invalid argument
com.apple.iPhoneSimulator:com.apple.appsupport.cplogd: Invalid argument
com.apple.iPhoneSimulator:com.apple.apsd: Invalid argument
com.apple.iPhoneSimulator:com.apple.aps.tcpdump.en0: Invalid argument
com.apple.iPhoneSimulator:com.apple.aps.tcpdump.pdp_ip0: Invalid argument
com.apple.iPhoneSimulator:com.apple.assetsd: Invalid argument
com.apple.iPhoneSimulator:com.apple.AXInspector: Invalid argument
com.apple.iPhoneSimulator:com.apple.BTServer: Invalid argument
com.apple.iPhoneSimulator:com.apple.calaccessd: Invalid argument
com.apple.iPhoneSimulator:com.apple.certui.relay: Invalid argument
com.apple.iPhoneSimulator:com.apple.dataaccess.dataaccessd: Invalid argument
com.apple.iPhoneSimulator:com.apple.gamed: Invalid argument
com.apple.iPhoneSimulator:com.apple.geod: Invalid argument
com.apple.iPhoneSimulator:com.apple.gmmd: Invalid argument
com.apple.iPhoneSimulator:com.apple.imtranscoderagent.plist: Invalid argument
com.apple.iPhoneSimulator:com.apple.imtransferagent: Invalid argument
com.apple.iPhoneSimulator:com.apple.itunescloudd: Invalid argument
com.apple.iPhoneSimulator:com.apple.itunesstored: Invalid argument
com.apple.iPhoneSimulator:com.apple.librariand: Invalid argument
com.apple.iPhoneSimulator:com.apple.locationd: Invalid argument
com.apple.iPhoneSimulator:com.apple.lsd: Invalid argument
com.apple.iPhoneSimulator:com.apple.managedconfiguration.mdmd: Invalid argument
com.apple.iPhoneSimulator:com.apple.managedconfiguration.profiled: Invalid argument
com.apple.iPhoneSimulator:com.apple.marcoagent: Invalid argument
com.apple.iPhoneSimulator:com.apple.mdt: Invalid argument
com.apple.iPhoneSimulator:com.apple.mediaremoted: Invalid argument
com.apple.iPhoneSimulator:com.apple.mediastream.mstreamd: Invalid argument
com.apple.iPhoneSimulator:com.apple.midiserver.sim: Invalid argument
com.apple.iPhoneSimulator:com.apple.mobile.installd: Invalid argument
com.apple.iPhoneSimulator:com.apple.mobile.profile_janitor: Invalid argument
com.apple.iPhoneSimulator:com.apple.mobileassetd: Invalid argument
com.apple.iPhoneSimulator:com.apple.printd: Invalid argument
com.apple.iPhoneSimulator:com.apple.search.appindexer: Invalid argument
com.apple.iPhoneSimulator:com.apple.searchd: Invalid argument
com.apple.iPhoneSimulator:com.apple.securityd: Invalid argument
com.apple.iPhoneSimulator:com.apple.syncdefaultsd: Invalid argument
com.apple.iPhoneSimulator:com.apple.twitter: Invalid argument
com.apple.iPhoneSimulator:com.apple.ubd: Invalid argument
com.apple.iPhoneSimulator:com.apple.UIKit.pasteboardd: Invalid argument
com.apple.iPhoneSimulator:com.apple.vibrationmanagerd: Invalid argument
com.apple.iPhoneSimulator:com.apple.webinspectord: Invalid argument
2012-05-20 22:10:44.477 SimulatorBridge[2603:fb03] CLSimulation: Couldn't clear simulated locations!
2012-05-20 22:10:44.479 SimulatorBridge[2603:fb03] CLSimulation: Couldn't append simulated locations!
2012-05-20 22:10:44.480 SimulatorBridge[2603:fb03] CLSimulation: Couldn't start location simulation!
com.apple.iPhoneSimulator:com.apple.accountsd: Invalid argument
com.apple.iPhoneSimulator:com.apple.AddressBook: Invalid argument
com.apple.iPhoneSimulator:com.apple.appsupport.cplogd: Invalid argument
com.apple.iPhoneSimulator:com.apple.apsd: Invalid argument
com.apple.iPhoneSimulator:com.apple.aps.tcpdump.en0: Invalid argument
com.apple.iPhoneSimulator:com.apple.aps.tcpdump.pdp_ip0: Invalid argument
com.apple.iPhoneSimulator:com.apple.assetsd: Invalid argument
com.apple.iPhoneSimulator:com.apple.AXInspector: Invalid argument
com.apple.iPhoneSimulator:com.apple.BTServer: Invalid argument
com.apple.iPhoneSimulator:com.apple.calaccessd: Invalid argument
com.apple.iPhoneSimulator:com.apple.certui.relay: Invalid argument
com.apple.iPhoneSimulator:com.apple.dataaccess.dataaccessd: Invalid argument
com.apple.iPhoneSimulator:com.apple.gamed: Invalid argument
com.apple.iPhoneSimulator:com.apple.geod: Invalid argument
com.apple.iPhoneSimulator:com.apple.gmmd: Invalid argument
com.apple.iPhoneSimulator:com.apple.imtranscoderagent.plist: Invalid argument
com.apple.iPhoneSimulator:com.apple.imtransferagent: Invalid argument
com.apple.iPhoneSimulator:com.apple.itunescloudd: Invalid argument
com.apple.iPhoneSimulator:com.apple.itunesstored: Invalid argument
com.apple.iPhoneSimulator:com.apple.librariand: Invalid argument
com.apple.iPhoneSimulator:com.apple.locationd: Invalid argument
com.apple.iPhoneSimulator:com.apple.lsd: Invalid argument
com.apple.iPhoneSimulator:com.apple.managedconfiguration.mdmd: Invalid argument
com.apple.iPhoneSimulator:com.apple.managedconfiguration.profiled: Invalid argument
com.apple.iPhoneSimulator:com.apple.marcoagent: Invalid argument
com.apple.iPhoneSimulator:com.apple.mdt: Invalid argument
com.apple.iPhoneSimulator:com.apple.mediaremoted: Invalid argument
com.apple.iPhoneSimulator:com.apple.mediastream.mstreamd: Invalid argument
com.apple.iPhoneSimulator:com.apple.midiserver.sim: Invalid argument
com.apple.iPhoneSimulator:com.apple.mobile.installd: Invalid argument
com.apple.iPhoneSimulator:com.apple.mobile.profile_janitor: Invalid argument
com.apple.iPhoneSimulator:com.apple.mobileassetd: Invalid argument
com.apple.iPhoneSimulator:com.apple.printd: Invalid argument
com.apple.iPhoneSimulator:com.apple.search.appindexer: Invalid argument
com.apple.iPhoneSimulator:com.apple.searchd: Invalid argument
com.apple.iPhoneSimulator:com.apple.securityd: Invalid argument
com.apple.iPhoneSimulator:com.apple.syncdefaultsd: Invalid argument
com.apple.iPhoneSimulator:com.apple.twitter: Invalid argument
com.apple.iPhoneSimulator:com.apple.ubd: Invalid argument
com.apple.iPhoneSimulator:com.apple.UIKit.pasteboardd: Invalid argument
com.apple.iPhoneSimulator:com.apple.vibrationmanagerd: Invalid argument
com.apple.iPhoneSimulator:com.apple.webinspectord: Invalid argument
2012-05-20 22:10:53.149 SimulatorBridge[2603:fb03] CLSimulation: Couldn't clear simulated locations!
2012-05-20 22:10:53.150 SimulatorBridge[2603:fb03] CLSimulation: Couldn't append simulated locations!
2012-05-20 22:10:53.150 SimulatorBridge[2603:fb03] CLSimulation: Couldn't start location simulation!

Why? It's neither necessary nor recommended.

How to run IOS Simulator without Starting XCode?

Hi,
I am trying to run the IOS simulator without first running XCode. If anyone knows the path to the application, please let me know.
Thanks!

This is for Xcode 4.3 Simulator... Start by locating Xcode in the /Applications Folder in the Finder....right/control click and select 'Show Package Contents', then drill down until you find it...good luck.

I need to install windows on my new Macbook pro for running my flight simulator software

Hi!
I'm new to the Mac world and I need to install windows on my new Macbook pro for running my flight simulator software which only runs on windows. I would like to purchase and download the windows 8.1 rather than buying the CD.
When i go to the microsoft store and click windows 8.1 it says it is only for who has windows xp or vista...
can you tell me where and how can i purchase the full installation 8.1 for download?
i will keep the ISO file on my flash drive.
Thanks!
<Re-Titled By Host>

it's likely an upgrade you are looking for and not a full install of windows
http://www.techrepublic.com/blog/windows-and-office/get-the-iso-you-need-to-crea te-your-own-windows-81-dvd/
if you get it as an iso file then you need to burn the iso file to a optical disc to install it

How to run two mobile application in netbeans

if I run the next main.fx ,netbeans execute the build.xml,
netbeans will clear and rebuild project,
when clear the project command error...
and if I run the project,one application is show ,and another can not show.
how install the fx mobile simulator?
in JavaFX Mobile 1.2 for Windows Mobile only a CAB file?

Hi!
You will find that and some other interesting stuff here
https://websmp206.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700001006302007E
The documents name is How-to Guide Framework Enhancements
rollo
Edited by: rollo on Aug 8, 2008 8:20 AM

How does digital I/O simulation work

Dug and looked but not finding how the digital I/O simulation of a board really works. (PCI-6229 in V8.0)
A simple example works fine (DIs toggle as 8-bit ports count up) but when I try to go across more than one VI level the base VI reports the initial condition (all 0 or false) repeatedly. Make the demonstration pretty boring and hard to tell what's working and not.
Tips, advice or references appreciated.

Hello Glen,
Every time a session (analog or digital) is started with a simulated board the data begins at an initial state. For digital ports, all lines will be low. You should be able to carry the current 'count' through multiple VI levels (sub VIs) without restarting at zero.
If you open the example "Read Dig Port.vi" under Help>>Find Examples you can test a few cases to see how the simulated device reacts:
1) If you run and stop, run and stop you will notice that each time the data begins at zero.
2) If you move the start and place a stop task into the loop, the data will continue to count up (within a single run). The data returns to zero when the task is cleared and a new task is created.
3) Create a blank VI and place a DAQmx Read inside. Create controls/indicators for the task in, task out and data. Add each of them to the connector pane and drag this VI as a sub-VI in the example. Place it in the loop between the read and the stop task (or the loop output if the stop is no longer there). You will notice that the values returned are consecutive. If the main VI reads 1, the sub VI will read 2, followed by 3 and 4 respectively in the following loop iteration.
I am guessing the reset is somehow happening in your code. If you cannot diagnose it with the above information, perhaps you could post a simplified version of your code which demonstrates the reset.
Hopefully this helps,
Jennifer O.

How does the Java Card simulator work? (Using NetBeans)

Hi,
I'm using NetBeans and am trying to simulate:
Someone powering up the card, saving a value, and powering down... And then they power it up again, get the value, and power down.
When I edit my APDU script to do the second part, the value I entered the first time is never stored, which probably means that when I 'run' my code, my application is loaded and everything is initialized again.
How do I edit NetBeans to not install the application every time I hit 'run'? And not to initialize the values, so that when i power it up again, I can get a value stored in a previous running of a script?
When I use powerup, powerdown and then powerup again, NetBeans doesn't powerup the simulator the second time. So understanding the Java Card Simulator would also help... where it is, how it runs, what options it runs with, etc.

Hi Shane,
I have not read anywhere else that the JC3 cards are not available, thank you so much for that tip! I am not doing it for research, but I am working on this alone and will have to deploy a card later on. I will be getting all the right versions now.
I'll ask the question then, using just the JCDK:
If I want to save a value on the card, and then need it at a later time, how do I go about it. Do I do the following?
(1) Install the application on the card. (I know how to do this)
(2) Run the simulator using -o "eeprom data filename"
(3) Save the value using the APDU calls and Java code on the card + close connection.
Code:
public class MyApp extends Applet {
    private static byte[] data = {0x00, 0x00, 0x00};
    // Install method, method to register, process method that can call saveData or recallData, etc
    public static void saveData()
       // code to change data
       data = {0x01, 0x01, 0x01};
    public static byte[] recallData()
       // code to return data
       return data;
}(4) Run the simulator using -i "eeprom data filename". get the value using recallData().
Will selecting the app not make data initialize to {0x00, 0x00, 0x00} again?
If I know this is the correct way of going about it, then I can work towards it getting done.
From other examples I can see that this is probably the way it should work, but my data array always returns as {0x00, 0x00, 0x00}.

How to run report SDRQCR21

hi all
how to run the report SDRQCR21.Can u explain me the steps.as i have read the Oss note -25444 but didnt understand it properly.If somebody can you explain me initial steps.
cheers
shalsa007..........

Dear,
Can you explain your requirement, in detail.
As, you may run the report in T. Code: SA38, with:
Transfer Option - It will regenearte Database for all the Items
Or
Comparison - Only for Simulation
etc...
Best Regards,
Amit
Note: For reference -
[How to run SDRQCR21|http://www.kowboyz.nl/blog/recovery-of-sd-requirements-for-mrp/]
[SDRQCR21|http://www.sap-img.com/production/md04-inconsistencies-after-pgi-sdrqcr21.htm]

HOW TO RUN ADOBE READER IN MACBOOK PRO

HOW TO RUN ADOBE READER IN MACBOOK PRO

Please stop using caps. It is considered shouting and rude.
You need to download the program. The reader runs when needed.
Barry

How to run 'Get-AssignedAccess' or 'Set-AssignedAccess' power shell commands in c# Application

Hi,
I have console application using which i am trying to run power shell command like 'Get-AssignedAccess' or 'Set-AssignedAccess'.
i am using below code for this it is throwing exception 'Get-AssignedAccess' doesn't exist in cmdlet which is correct because these commands belongs to function category.
using (PowerShell pwInstance = PowerShell.Create())
pwInstance .AddScript("Get-AssignedAccess");
var result = pwInstance .Invoke();
How can we execute this kind of command using c#?
Thanks,

Hi prakashlight,
Thank you for comming back and tell us the result. For more information about how to run PowerShell script in C# language, you can refer to this blogpost here:
Executing PowerShell scripts from C#
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Does anyone know How to run twin monitors on a MacBook Pro operating on a Windows Server 2008 R2 ?

Hi
Does anyone know How to run twin monitors on a MacBook Pro operating on a Windows Server 2008 R2 ?

I know this doesn't help you much, but, I think you have to see if your Mac pro does audio out via HDMI. I don't even know if mine does via DVI. I think it may have to do with the adapter. Try going into Audio MIDI and setting the digital out to multichannel
and using the toslink cable for now. Lemme see...apparently DVI does not carry audio at all. Hm. apparently monoprice could be helpful? If I understand what you're saying correctly: you want to take DVI and multichannel audio via the Toslink and have it all go out over HDMI, right? Whooo..... amazon...looks like it's about $100http://www.amazon.com/Audio-SPDIF-Toslink-Converter-Adapter/dp/B0015YYOQQ
just a shot in the dark
I'm probably wrong....or not
John B

How to run expdp from client ?

Hi All,
I tried searching google and forums for my issue but to no avail > How to run expdp from client side ....like in my laptop.
Because currently our PROD database server has no space for expdp dump file. So I want it directed to my laptop which has an extenal USB of 1TB harddisk...via client EXPDP
import data using impdp command
Posted on: 08-May-2012 11:36, by user: 841731 -- Relevance: 53% -- Show all results within this thread
below command is correct or not? if it is not correct could you please send me the correct command. impdp user/pass@databasename schemas=sourceschemaname remap_schema=sourceschemaname:destinationschemaname ...
System generated Index names different on target database after expdp/impdp
Posted on: 30-May-2012 11:58, by user: 895124 -- Relevance: 43% -- Show all results within this thread
After performing expdp/impdp to move data from one database (A) to another (B), the system name generated indexes has different ...
[ETL] TTS vs expdp/impdp vs ctas (dblink
Posted on: 08-May-2012 21:10, by user: 869578 -- Relevance: 39% -- Show all results within this thread
(table : 500 giga, index : 500 giga), how much faster is TTS (transportable tablespace) over expdp/impdp, and over ctas (dblink) ? As you know, the speed of etl depends on the hardware capacity. (io ...
Oracle Client
Posted on: 21-Jun-2012 22:47, by user: Sh**** -- Relevance: 32% -- Show all results within this thread
Hi Guys, Please can you guys elaborate the difference between Oracle Client and Oracle Instant Client. Also, please can you advise from where I can download the Oracle normal ...
Oracle 10g Client
Posted on: 05-Jun-2012 10:11, by user: dzm -- Relevance: 26% -- Show all results within this thread
to search at oracle site and this forum, but i wasn't able to find a link to download the oracle 10g client. I really need especificaly the 10g version. Anybody know the link or another way to download ...
9i client to access 11g database
Posted on: 22-Jun-2012 07:31, by user: kkrm333 -- Relevance: 24% -- Show all results within this thread
Hi, Can i access a 11g database using 9i client? Thanks,
SQLplus in Oracle Client
Posted on: 14-Jun-2012 00:36, by user: Tim B. -- Relevance: 24% -- Show all results within this thread
Hi, I tried to install an 11g oracle client in linux. As I've compared the files with the files when you install using the oracle instant ...
Re: Information on Oracle Client 11202-1.1.4-6
Posted on: 05-Jun-2012 03:33, by user: 898763 -- Relevance: 23% -- Show all results within this thread
Actually thats the client requirement
Analysing the performance of a single client
Posted on: 28-Mar-2012 02:05, by user: 880172 -- Relevance: 23% -- Show all results within this thread
timeouts even on some of the simplest queries. I want to try and get some data about how just this one client is performing and what it’s doing, but everything Google has thrown up so far is orientated around ...
to make client connection as sys
Posted on: 12-Jun-2012 22:04, by user: user11221081 -- Relevance: 23% -- Show all results within this thread
Dear gurus can i connect to my server from my client machine with sysdba without giving sys password i have connected in different ways as sys@abc ...Thanks a lot.

Though you can initiate the binary from your client side but for the file creation, there is no other way but to store it on the server side. So your best bet would be to get some space free on the server side of yours.
Aman....

How to run a Concurrent Program from the back end?

Hi,
How to run a Concurrent Program from the back end?
Is it Possible to see that Concuurent Request id which we run from the back end, in the front end?
If yes, then Please Give reply how to write the code
Thanks in Advance,
Bharathi.S

This is documented in Chapter 20 of the Application Developers Guide http://download.oracle.com/docs/cd/B53825_03/current/acrobat/121devg.pdf. These MOS Docs also have some information available
221542.1 - Sample Code for FND_SUBMIT and FND_REQUEST API's
235359.1 - How to Launch Planning Data Pull MSCPDP using FND_REQUEST.SUBMIT_REQUEST
HTH
Srini

How to run a report from oracle 10g form in .csv format

dear all,
how to run a report from oracle 10g form in .csv format? i've already run in pdf & excel format.
i'm using
SET_REPORT_OBJECT_PROPERTY (ro_report_id, report_desformat, 'PDF'); --for pdf
SET_REPORT_OBJECT_PROPERTY (ro_report_id, report_desformat, 'SPREADSHEET'); ---for excel
Please Help..

i have already tried.
but the report show in htm or html format. that file will not save into csv. please help.

How to run a script on Oracle server from isqlplus

Hi I am trying to run a script on my workstation from Oracle server through isqlplus workarea. I entered following command and get the following error. i have enabled isqlplus URL by editing web.xml file already. Can please someone help how to run the script?
@http://myaixserver.com:5560/scripts/Databasestartupstages.sql;
SP2-0920: HTTP error 'page not found (505)' on attempt to open URL

So far, you haven't specified your rdbms version and isqlplus behaved differently on a 9iR1, 9iR2 from the one release on 10gR1/R2. on 9i it was a servlet based on a JServ servlet executor machine, meanwhile on 10g it is a J2EE compliant application deployed on an OC4J container, so configuration is different.
You may want to take a look at these references -->
* Starting iSQL*Plus from a URL
* Creating Reports using iSQL*Plus
~ Madrid

How to run VSAE MP simulator in my workstation

Similar Messages

Maybe you are looking for