How to run Wired WRTG54G2 V1 in same subnet as my broadband router?

Hi,
I have a linksys broadband router E2000 and a cable running from it to another location where I have a linksys WRTG2 V1.
I would like the WRTG2 to be running in the same subnet as the E2000, but I seem not be able to get this done.
Appreciate any assitance. Is what I'm trying to do (briding I guess?) supported?
regards
Osama Salah

So what you want to do is have these two routers in the same network, right? The WRT54G2 does not have a bridge mode option but this type of setup can easily be done. You simply have to cascade the routers LAN to LAN. For more details, check out this article: Cascading (Connecting) a Linksys router to another router.

Similar Messages

  • How to run two query  in the same preparedStatement

    Hi all,
    Please tell me how to run two queries in the same preparedStatement object ?
    In my module I have to run two queries and I don't want to make two methods for running two different queries.
    I just want to call this method for both of my queries.
    methodName(long param)
    Connection conn=null;
    PreparedStatement pstmt=null;
    //////////////// some coding
    Please Help !
    Thanks in advance
    amitindia

        public void foo()
            Connection connection = null;
            PreparedStatement stmt = null;
            try {
                connection = ...get from pool...;
                stmt = connection.prepareStatement("...");
                ...fetch results...;
                stmt.close();
                stmt = null; // So the finally statement works if there is an exception
                stmt = connection.prepareStatement("...");
                ...fetch results...;
            } finally {
                if (stmt != null) ..close it...;
                if (connection != null) ..return it to pool...;
        }

  • How to run two icalenders on the same computer?

    How can i run two separate icalenders on the same computer? I have my own icalender with work, home, etc, and it's totally full. I am now running an artists collective and will publish the collectives icalender on the web. I don't, however, want to mix what will be a pretty busy calender with my own already too full one. Is it possible to run two totally separate calenders on the same computer?
    macbook   Mac OS X (10.4.8)  

    trsv,
    Welcome to Apple Discussions.
    Create two Groups...
    Calendar 1:
    Work
    Home
    etc
    Calendar 2:
    Collective Calendar
    You can then switch which groups you wish to display by activating/deactivating the check mark in the Calendar source window.
    That will also allow you to selectively publish the Collective Calendar.
    ;~)

  • How to run QT and Photoshop at same time?

    Hi there, does anyone know how I can keep BOTH my Photoshop file windows AND a Quicktime movie open and running at the same time. I am trying to follow a set of QT tutorial movies that I downloaded from a podcast (and I've also tried using a Photoshop Tutorial CD adn same thing happens). The problem is when I try to follow along by having a Photoshop file open, the minute I click on the QT all my extra Photoshop windows (layers, brushes, history, etc) disappear, leaving just the file. This is no good because what I'm trying to do with the tutorial is to duplicate what they are doing in those windows. Of course when I click back into Photoshop they reappear but by this time the QT movie has raced ahead and the minute I go to pause it .... Photoshop goes again ... is there a way to keep all windows to both applications visible ?

    Short of using a second monitor (mirror) there are a few tricks you could try.
    Open the QT file and shrink the display size. You can do this by dragging the "grow" window (lower right corner) or using keyboard shortcut Command-0 (half size).
    Adjust the Photoshop window to a smaller size and arrange the toolbars so you can "view" the underlying QT file.
    Next is to keep your hands off the mouse (except in Photoshop).
    The spacebar will start and stop playback of the QT file. Use the arrow keys (right and left) to "step" through frames.
    Your workflow might be something like this:
    Begin the QT file and pause it using the spacebar. Command-Tab (tab key) to switch to PS. Review the work and switch again via Command-Tab.
    It will take some patience and practice to get the right combinations.
    You can also gain some screen "real estate" by setting your display size to the highest possible settings. System Preferences/Displays is where you'll find these options.

  • How to run report from multiple user same time

    Hi,
    We are using oracle database 11g R2
    Oracle Forms & reports : 11.1.2
    O.S : Windows & Professional
    We have install oracle database, Oracle forms & reports in server. Near about 25 users are accessing that database, forms & reports from server through browser.
    I have one problem, when users runs a report there report goes in queue and runs one by one in FIFO manner.
    If one user has a report that take long time other users has to wait for that time.
    Can it is possible to run reports in multitasking manner, i.e multiple report can be run simultaneously.
    http://servername:7001/reports/rwservlet/showjobs?
    Using above url am able to see jobs in queue.
    Thanks in advance.

    Hi Denie,
    I am new to it and don't know how to add engines to server.conf , can you please tell me how to add engine to it.
    I search server.conf file but i did't found it.
    Please help..
    Thanks in advance.

  • How to run a servlet  at the same time when server started

    we are using tomcat server pls tell me clearly it's urgent

    Clearly you're also annoying. Fourth thread, same topic.
    http://forum.java.sun.com/thread.jspa?threadID=724541&messageID=4176289#4176289

  • How to install wired printer via rj45 on Extender RE2000 connected to router EA6700

    Hi,
    I´ve installed a new network at home but I´ve problem when trying to connect my printer to my RE2000.
    Someone who know how to do?
    // Kent

    If you have not setup the extender yet, you typically connect it a computer first and configure. 
    FAQ for RE2000
    3. How can I set up the RE2000 to connect to my router or access point?
    There are three (3) ways to set up the RE2000:
    i.  By running the Setup CD that comes with the device.  For instructions, click here.
    NOTE:  If you do not have the Setup CD, you can download the setup software from the Linksys Support Site.
    ii.  By using the Wi-Fi Protected Setup™ (WPS) button on the range extender if your router also supports this feature.  To learn how to connect devices using this feature, click here.
    iii.  By configuring the device through the web-based setup page.  To learn how, click here.
    You will most likely want to assign the printer/extender a DHCP lease/reservation.  Will make printing to it later faster and more consident for mutliepl different OS (Win/OSX/Linux/BSD/iOS/...).   Otherwise the computer printing will have to query the network to find it.  You can get by without it, just little easier.

  • FAQ Broken: How do I upgrade the firmware on a WRT54G Wireless-G Broadband Router?

    I tried to view the above question in the FAQ, but it goes to the answer for a different question.
    I then tried "How do I upgrade the firmware on my router?" a little further down,
    but it acts like I'm not authenticated, and won't accept my Linksys Forums e-mail address
    and password. When I try the password recovery, it says my e-mail address is invalid.
    Can someone please point me to instructions for upgrading the firmware on my WRT54G?
    Specifically, someone told me that the router needs to be listening on the default 192.168.1.1
    IP address, but mine is listening on 10.1.1.2. Do I need to change this just to flash new
    firmware, because that will be a little painful.
    Thanks,

    Go to website linksysbycisco.com/downloads.........insert model no of your router in serach tab......select proper version of your router........download the firmware file......save that file on desktop
    Follow these steps to upgrade the firmware on the device : -
    Open an Internet Explorer browser page on a computer hard wired to the router...
    In the address bar type - "Default Gateway of Your Router"...Leave the Username blank & in Password use admin in lower case...
    Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...
    Wait for few seconds until it shows that "Upgrade is successful"  After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
    Now reset your router :
    Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
    **To Check the Default Gateway of the router...Click Start >> All Programs >> Accessories >> Command Prompt...A black box will appear(Command Prompt)...In the Command Prompt window type ipconfig and press 'Enter'...Look for Ethernet Adapter Local Area Connection IP Address , Subnet Mask and Default Gateway...
    **To all the above setting using the wired computer.

  • How to set up a password or security using wireless g broadband router wrt54g

    Hello Everyone I have had my router for a while and a friend mentioned I should password protect my connection so other people can't lech off of my wireless connection. My roter is installed and connected to my main office computer and I only bought it so i could use my laptop around the house. Everytime I go to profile then secuirty settings and try to imput any password and hit ok. Well after I connect to my wireless profile it comes up with my router has no secuirty turned on at this point. Yet I read from many sites that my router which is model wrt54g has secuirty features. Could someone please help me figure out how to password protect my wireless connection. THank you

    Hit there exiledone1!
    If there'd be any computer which is working through the router, you could get into the router's User Interface without any problems then. You need to get to this page so that you'd be able to do necessary changes on it's wireless settings.
    http://192.168.1.1 would be the address, type this on the Address Bar of your Internet Explorer browser or Mozilla Firefox browser. If you'll be prompted for a login page, simply leave the username blank (or don't write anything on it) and your password would be admin. You'll be able to see the Wireless Tab once you'll be inside the page and below the Wireless Tab would be subtabs and one of them is Wireless Security. Just click on Wireless Security and you can choose WPA for your Security Mode. Just type in anything right on the WPA Pre-shared key field and this will then serve as your wireless password (a.k.a network key). Just make sure the length of the key would not be less than the count of 8 characters.

  • How to disable wireless for Version 4 G LTE Broadband Router with Voice?

    How can I disable wireless on the Version 4 G LTE Broadband Router with Voice?

        Gothcha! Thanks so much for following up and providing this information, James2014. I've provided a link with the instructions to turn off the wireless radio on the device. Check it out here, http://vz.to/VEHZt0
    YosefT_VZW
    Follow us on Twitter @VZWSupport

  • How to run a SQL manually with the same SQL_ID

    I want to know how to run a SQL which comes from application side manually so that same SQL_ID is generated. I am aware that even if there is a small change in the sql(even a space) the sql_id gets changed. CURSOR_SHARING_PARAMETER is similar in my DB.
    Thanks
    Rudresh

    I think you really want is the execution plan (plan_hash_value), what about outlines ?
    HTH
    Antonio NAVARRO

  • How to run two versions of dreamweaver at the same time

    How to run two versions of any dreamweaver at the same time?
    There must be a way to do this.

    east99 wrote:
    > How to run two versions of any dreamweaver at the same
    time?
    > There must be a way to do this.
    Yes, there is: on two separate computers.
    You cannot run two versions of Dreamweaver simultaneously on
    the same
    computer. They can coexist side by side, but the operating
    system will
    not let you run them together.
    David Powers, Adobe Community Expert
    Author, "The Essential Guide to Dreamweaver CS3" (friends of
    ED)
    Author, "PHP Solutions" (friends of ED)
    http://foundationphp.com/

  • How to run the two events at the same time by using event structure

    In my project, I have to run two stepper motor which can run both forward and reverse direction by changing the control in front panel so I am using event structure. In front panel I gave two separate controls for both stepper motor such as forward,reverse and stop. I would like to do motor1 will rotate alone, motor2 will rotate alone and both motor will rotate at the same time when user click the control in front panel. My doubt is how to run a motor2 while motor1 is running at the same time please tell me the suggestion for this problem
    Attachments:
    motor.png ‏192 KB

    How do you control your motors?
    Most motion control systems do supply two modes:
    a) position based motion: The motion axis has a positioning system (most often some kind of encoder system) which enables the motion control to know where the axis is currently located. Passing the target location to the controller will result in the axis to move to that location. This is, for most applications, the recommended approach. It does require some sort of motion controller device.
    b) direction based motion: This essentially tells the periphery device for the motor to move at a certain speed into a certain direction. As it does not stop at a dedicated location, it induces great risks for many applications if there are no kill- and/or end-switches. Depending on the setup, this can be either done with motion controllers or pure by software control (e.g. "controlling" the voltage level for the motor).
    If you go for a), there is not much preventing parallelism as you request.
    Option b) depends on the setup. If you have a control loop in the software itself, you have to move to an architecture like the producer/consumer. Please note that this does not incorporate any security measures for the external devices.
    hope this helps,
    Norbert
    CEO: What exactly is stopping us from doing this?
    Expert: Geometry
    Marketing Manager: Just ignore it.

  • How to create reports servers with the same name in two nodes in Reports

    Greetings
    We are migrating Oracle Application Server 10g (9.0.4) to a better hardware infrastructure with high availability. We want to provide 2 new Oracle Application Server 10g (9.0.4) in High availability and we want to avoid modify the existing forms and reports code, but the code is looking for a specific reports server name when calling reports, but I couldn't create the same reports server name in the both oas machines, I could create the reports server in only one node. I want to create a reports server with the same name in both nodes but it is not possible. I know that there is a procedure to do that in 10.1,2 (Note 437228.1, How to Create Two Reports Servers With the Same Name in the Same Subnet) but I couldn't find the equivalent procedure in 9.0.4.
    Anybody kwows how to create a reports server with the same name in two nodes using 10g (9.0.4)
    Thanks
    Ramiro Ortiz.

    Hello.
    I applied the patch 4092150 on my oas 9.0.4.2 and I modified my rwnetwork.conf file changing the port to 14022 by following the note "How to Create Two Reports Servers With the Same Name in the Same Subnet? [ID 437228.1]" but I am facing the same error rep-56040 "server already exists in the network".
    When I run osfind command I get the following information (My reports server is senarep and I want to create it on SNMMBOGOAS10):
    osfind: Found 2 agents at port 14000
    HOST: SNMVBOGOAS10.sena.red
    HOST: SNMVBOGOAS09.sena.red
    osfind: There are no OADs running on in your domain.
    osfind: There are no Object Implementations registered with OADs.
    osfind: Following are the list of Implementations started manually.
    HOST: SNMVBOGOAS10.sena.red
    REPOSITORY ID: IDL:oracle/reports/server/EngineComm:1.0
    OBJECT NAME: senarep2
    REPOSITORY ID: IDL:oracle/reports/server/ServerClass:1.0
    OBJECT NAME: senarep2
    HOST: SNMVBOGOAS09.sena.red
    REPOSITORY ID: IDL:oracle/reports/server/EngineComm:1.0
    OBJECT NAME: senarep
    REPOSITORY ID: IDL:oracle/reports/server/ServerClass:1.0
    OBJECT NAME: senarep
    Any Ideas?

  • How to run the PioneerCyclingJSP and MotorPriseJSP modules at a time

    Guys,
    I would like to run the PioneerCyclingJSP and MotorPriseJSP modules at a time.
    Could you please suggest me the steps to run both servers at same time on JBOSS 5.0 with ORACLE.
    How to run a more that one server instance...
    Thank you

    You should be able to include both modules when building your ear file. Then both the module's war files will be created in the ear file. Access both the applications with their respective /PioneerCycling or /motorprise ( look for context root in application.xml)
    If you want to run each application on different server, then
    1. create 1 individual instances of jboss server for pioneer and another for motorprise
    2. create additional dynamo server using command makeDynamoServer.bat motorprise 8861 8851
    3. deploy each one on respective server folders in jboss
    Use the appropriate ports to access ( say for ex:)
    localhost:8860/pioneer
    or
    localhost:8861/motorprise
    -karthik

Maybe you are looking for