How to safe my hosting server
i am web developer design my website http://www.monicaoberoi.com/ in php and host on linux hosting ,someone try to hack my website . plz suggest me how can i do safe my website.
i am web developer design my website http://www.monicaoberoi.com/ in php and host on linux hosting ,someone try to hack my website . plz suggest me how can i do safe my website.
Similar Messages
-
How to email text from a text component in my applet on a the host server ?
How to email text from a text component in my applet on a the host server, back to my email address ?
Assuming I have Email Form on the host server.
Help will be appreciated.You can do like below
=REPLACE(Fields!Column.Value," " & Parameters!ParameterName.value & " ","<b>" & Parameters!ParameterName.value & "</b>")
The select the expression and right click and choose placeholder properties
Inside that set Markup type as HTML
then it will highlight the passed parameter value in bold within the full xml string
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs -
Help, how do i find out the host server for a website i have inherited
hi i inherited responcibilty for a website, simply because
there was noone else avalable. i have dreamweaver cs3, but only
about 2 weeks worth of knowledge and experience. I was given info
ie. ftp address and username etc, so have been able to download the
website to my home computer, and have been making updates, now
however i need to find out more about setting up a test server so i
can use dynamic pages, specifically for collecting form
information, collecting donations and selling art work. i will need
some information from the host server to start with, but am unsure
as how to identify and contact them, can anyone help me please. I
am sure it is rudimentary, but the information is essential.
also as a side note, could anyone tell me how to find out
where the websites domain name is regestered ( other than
contacting the original designer, as that seem quite impossible)
because i get the feeling that if all else fails i may be able to
move the website to another host ( not that i now how yet, or even
how to select or find a host) please let me know if any of my
assumptions are wrong.
Thanking you in advance
J
volunteer.Hi,
To find out about the host, go to register.com and look up
the domain name.
When it gives you results, it'll say that the name is already
taken, but it
will let you do a 'whois' on it.
Those results can give you some info such as the server DNS.
That may let
you figure out the host.
Sometimes the technical contact in the whois, is the host as
well.
"nsfwebnewbie" <[email protected]> wrote in
message
news:fmo8cf$3l5$[email protected]..
> hi i inherited responcibilty for a website, simply
because there was noone
> else
> avalable. i have dreamweaver cs3, but only about 2 weeks
worth of
> knowledge and
> experience. I was given info ie. ftp address and
username etc, so have
> been
> able to download the website to my home computer, and
have been making
> updates,
> now however i need to find out more about setting up a
test server so i
> can use
> dynamic pages, specifically for collecting form
information, collecting
> donations and selling art work. i will need some
information from the host
> server to start with, but am unsure as how to identify
and contact them,
> can
> anyone help me please. I am sure it is rudimentary, but
the information is
> essential.
> also as a side note, could anyone tell me how to find
out where the
> websites
> domain name is regestered ( other than contacting the
original designer,
> as
> that seem quite impossible) because i get the feeling
that if all else
> fails i
> may be able to move the website to another host ( not
that i now how yet,
> or
> even how to select or find a host) please let me know if
any of my
> assumptions
> are wrong.
>
>
> Thanking you in advance
>
> J
> volunteer.
>
> -
How to backup Hyper-V host server on DPM 2012 R2
Hi,
I'm about to backup my first Hyper-V host server using DPM 2012. I'm looking for a strategy to back up both the host server and virtual machines. Note: I'm not really interested in backing up all the virtual machines. Many are non-production
or for testing. How do you do it? I was thinking about selecting in the protection group:
- BMR and SS for the Hyper-V host
- The C: volume of the Hyper-V host
- Select the Child partition snapshots of the virtual machines I want to backup.
In my environment, Hyper-V role is installed on the C: drive, but the virtual machines are stored on E:, which I would not backup directly (volumes) since I'm backing up the VMs using Child partition snapshot.
Would I be able to restore my Hyper-V host and the selected VMs with a backup like this?
Anyone want to share how they setup their protection groups for Hyper-V?
Thanks.No, use full server backup (image) if VM config are stored at default storage (disk C).
Understanding where your virtual machine files are [Hyper-V]
Using this method to perform a full server backup is the recommended method because it captures more data than the other method.
Backing Up Hyper-V Virtual Machines
http://social.technet.microsoft.com/Forums/en-US/4592bad3-9f5d-4313-b9a0-9da6de7f43c2/restoring-vm-settings?forum=winserverhyperv
Have a nice day !!! -
How to specify Host Server for Replicated Virtual Desktops within RDVH Collection
My question about how to specify Host Server for Replicated Virtual Desktops within Collection.
I know there is a aswered thread on this, but that solution (wait a week) didn't work for me.
So i have 2 servers, RDS01 and RDS02 with both 15 Hyper-V VM's and replicating to eachother. That part works fine.
Now I wanted to make it easy for my users I build a Connection Broker: RDCB
All went fine in that setup, but when I want to add the existing VM's from RDS01 and RDS02 to the collection it just radomly adds running ones and replicated ones.
So both RDS01 and RDS02 have 15 VM's running and 15 replica's in stopped state, but when I look in my collection, it says RDS01 has 23 and RDS02 has 7 VM's. When I add them all, I see he wants to add a lot of stopped states replica's from RDS01 instead of
the running ones from RDS02.
How can I specify which one he should use? Or need I disable replication first, setup the whole RDCB collection thing, and then turn replication back on? Or does Hyper-V replication not work at all when used in a collection?
I hope someone can help out here. I'm googling and trying for 1,5 week now, but i can;t get it right.
Thanks in advance.Hi Robin,
Thanks for your patience.
After you removed Replication from 1 machine on both RDS01 and RDS02, please restart that machine. After that, please add this machine to the RD collection again to test how the issue goes.
As we know, Hyper-V Replica provides asynchronous replication of Hyper-V virtual machines between two hosting servers. It is simple to configure and does not require either shared storage or any particular storage hardware. Any server workload that can be
virtualized in Hyper-V can be replicated. Replication works over any ordinary IP-based network, and the replicated data can be encrypted during transmission. Hyper-V Replica works with standalone servers, failover clusters, or a mixture of both. The servers
can be physically co-located or widely separated geographically. The physical servers do not need to be in the same domain, or even joined to any domain at all.
Currently, would you please add only running state VMs to the RD CB collection? And would you please capture some screenshots of the error message? Thanks very much for your cooperation.
Best regards,
Sophia Sun
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
How to use Mac Mini as web hosting server?
Hi,
I would like to use my mac mini as a web hosting server.
I have a few domains that I want to host on my mac mini.
How do I configure/setup the mac mini?
Best,
Leoyes, a little. it's nice for people not used to setting up from source or doing tons of stuff in the command line. it installs like any other mac application & puts a nice control pane in system preferences. plus, you can set up for updates to keep everything current with patches.
I'm not sure how to handle the multiple domains, but whatever you find on apache that covers this should also or mostly apply to you too. -
My client has a website up and running. He had me redesign it in Muse. What do I need and how do I publish the new design to his host/server?
Hi Jefffrey
I believe your query is answered in live chat.
Please feel free to contact us again.
Thanks,
Sanjit -
How to connect a CVS server with remote Hosts(NWDS7.0)
Hi Frndz..
I installed CVSNT server in one machine n itz workiing fine with that NWDS in that machine , now i want make connect that CVS server from remote machines NWDS's to use that CVS server as a central repo'
Can anyone guide me how can i connect that server from remote machines thru NWDS.
Thnaks in Advance
Regards
Rajeshrajesh,
did u check this link
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d079e754-8c85-2b10-8b9a-b36db5262122
Thanks
Bala Duvvuri -
All aspx pages running locally via IIS or Visual studio inbuilt server can not be displayed in FF5. This problem has only occured since upgrading to FF5. The same sites/code worked fine with the previous version of FF.
When uploaded onto a hosting server the pages display fine. Pages all display ok on local IIS on IE, chrome, opera etc.
I do go through a proxy server, but so do the other browsers.
All this means i can't develop locally on FF. Help please!Maybe your application doesn't support "Send NTLMv2 response only. Refuse LM & NTLM".
https://support.software.dell.com/zh-cn/foglight/kb/133971 -
How do i delploy on hosted server which does not support crystal. Is RAS ?
have to put a solution on a public hosted server. it does not support crystal . cannot add to GAC
if i use RAS(or cr 2008 server) on another server . Web app works on public server but points to my RAS server. Do I still need components on the public server. if I do this will not work,
any ideas
Johnmany thanks. there is some tendancy to cloud hosts. all you get is ftp access and .net ompersonation.
just drop the webisite in. so no MSI use which also rules out merged modules
thanks
john -
I am need of some assistance please. I am a system admin and I am trying to create a script that will assist with the tedious tasks I have to do with disabling a user that no longer works for the company.
I have created a script so far that will reset the users passwords and remove them from all groups (minus domain users).
I am trying to make it where it will deny permissions to logon to Remote Desktop Session Host server as well as give full mailbox permission to the manager in Exchange Server 2010.
I know with Exchange 2010, I will need to add the Powershell snapin. Is there a way for this to be added into the script? I am thinking to add the code:
add-pssnapin Microsoft.exchange.management.powershell.e2010
Is there another way to do this? Any help or recommendations would be much appreciated.
$ou = Get-ADUser -SearchBase "<*OU info here*>" -Filter * |
Set-ADAccountPassword -Reset -NewPassword (ConvertTo-SecureString -AsPlainText "<*Password here*>" -Force)
foreach ($user in $ou) {
$UserDN = $user.DistinguishedName
Get-ADGroup -LDAPFilter "(member=$UserDN)" | foreach-object {
if ($_.name -ne "Domain Users") {remove-adgroupmember -identity $_.name -member $UserDN -Confirm:$False} }Why not just disable the account?Why are you searching an OU foro users when you just want to terminate one user?
You can remotely connect an exchange session and manipulate the mailbox permissions. You do not load a snap-in except on the Exchange server.
$Session=New-PSSession -ConfigurationName Microsoft.Exchange -ConnectionUri http://<FQDN of Exchange 2013 Client Access server>/PowerShell/
Import-PSSession $Session
# exchange commands here
\_(ツ)_/
We have a checklist we have to go through with the tasks listed. We have to keep to the account enabled until HR changes
the status which is usually 30-90 days depending. Managers sometimes need to access the accounts to retrieve information, etc. We put the users in an OU; once we are given permission from the manager we move forward in the removal. -
How can i access dmz server via public ip from inside?
hi all !
As shown in Figure,how can i access the server in dmz zone via public?
i can access it via private ip 192.168.1.1 now,but i can't access it via 101.100.1.2.
who can help me ?
thank you !Hi,
You would have to configure Static NAT from DMZ to INSIDE for the server in the same way you have done for DMZ to OUTSIDE.
Basically in the following way for example
object network DMZ-WEB
host 192.168.1.1
nat (dmz,inside) static 101.100.1.2
This would enable your users on the "inside" to access the "dmz" server with the public IP address. And naturally only with the public IP address after this NAT.
Hope this helps
Please do remember to mark a reply as the correct answer if it answered your question.
Feel free to ask more if needed
- Jouni -
How to resolve a host name from IP using JNDI/DNS service provider
Hi
I got two questions on JNDI/DNS service provider:
1) How to resolve a host name when i got an IP
I understand How I do it inverse.
Hashtable env = new Hashtable();
env.put(Context.INITIAL_CONTEXT_FACTORY, "com.sun.jndi.dns.DnsContextFactory");
env.put(Context.PROVIDER_URL, "dns://"+server+"/"+domain);
DirContext ictx = new InitialDirContext(env);
Attributes attrs1 = ictx.getAttributes(host, new String[] {"A"});
2) This example above works when I specify the domain in the provider url.
If I am not specifing a domain but only the dns server I got an NameNotFoundException.
What should I do if I don't got the domain?
get the availible domains and loop on them?Hi,
if your DNS server supports that, you can do a reverse DNS lookup. This works as follows:
String server = "your.dns.server";
String domain = "in-addr.arpa";
String ip = "4.3.2.1";
Hashtable env = new Hashtable();
env.put(Context.INITIAL_CONTEXT_FACTORY, "com.sun.jndi.dns.DnsContextFactory");
env.put(Context.PROVIDER_URL, "dns://" + server + "/" + domain);
DirContext ictx = new InitialDirContext(env);
Attributes attrs1 = ictx.getAttributes(ip, new String[] {"PTR"});1: Use the pseudo-domain in-addr.arpa
2: Use the reverse IP address for lookup, i.e. if your host has 1.2.3.4, use 4.3.2.1!!
3: Request the PTR attribute
see also [http://en.wikipedia.org/wiki/Reverse_DNS_lookup|http://en.wikipedia.org/wiki/Reverse_DNS_lookup]
Martin -
Hi,
When the page is submitted for approval by using SharePoint OOTB Page Approval Workflow, it takes quite long time and prompt error message as below.
"The form cannot be submitted to the Web server either because your computer is offline or because the host server is currently unavailable.
If this problem persists, contact your network administrator."
It only happens in Internet Explorer version 8 and 9. IE version below 8 is not used in environment.
But it is working in Firefox.
Please help me on how to fix this issue.
Thanks.Hi Htet,
Here are some articles with the same issue message, you can check the setting of Link Translation rule in the ISA from below.
http://sharepointontop.blogspot.com/2012/06/form-cannot-be-submitted-to-web-server.html
http://bytelab.blogspot.com/2008/03/problem-submitting-infopath-forms-using.html
http://social.msdn.microsoft.com/forums/en-IE/sharepointcustomizationprevious/thread/84be34b3-b806-49ce-a5c2-b5ad8a1ff09f
Thanks
Daniel Yang
TechNet Community Support -
The grace period for the Remote Desktop Session Host server has expired
<p>I'm running Windows Server 2012, we only have 1 server and it's a DC. I'm trying to RD to the server from my Windows 7 laptop. It was working fine on Friday but when I came in on Monday I got message saying that 'The remote session was disconnnected
because there are no Remote Desktop License Servers available to provide a license'
So after a bit of digging I found out my 'grace period' had expired, so ordered a new license which I got today, installed this all ok but still i cannot connect via RD I get the same message....went into the RD License Diagnoser and it said the problem
was as follows
'The grace period for the Remote Desktop Session Host server has expired, but the RD Session Host server has not been configured with any license servers. Connections to the RD Session Host server will be denied unless a license server is configured for
the RD Session Host server.'
Suggested Resolution as follows
Configure a license server for the Remote Desktop Session Host server. If you have an existing license server, specify that license server for the RD Session Host Server. Otherwise, install RD Licensing on a computer on your network and Configure RD Session
Host Server to use it.'
I cannot figure out how to do this as I cannot find the RD Session Host Server tool.
Can any of you lovely people help me pleaseHello,
Best option would be to assign the license server by using AD GPO. Youl will need to configure the following:
Computer Configuration\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Licensing
and define the settings for:
Use the specified Remote Desktop License Server
Set the Remote Desktop Licensing mode
Then assign the policy tho your server.
regards Robert Maijen
Maybe you are looking for
-
Issue while upgrading ODI 10g to 11g
Hello Gurus, I am upgrading repositories of ODI 10.1.3.5 to ODI 11.1.1.6 using Upgrade Assistant utility. We have cloned/replicated the database repositories for ODI Master & Work. After giving all details it checks for schema version registry, ODI v
-
How can I use two screens to display one window
Before Mavericks, MAC OS allowed you to use two screens (next to each other) in order to display one (big) window of one application. That would mean that a window would start on your left screen en would continue on the right screen. With Mavericks,
-
I need to move my library to a new computer. my music is downloaded CD's. Is the only way to do this to sync all songs to the ipod and them sync to new computer. the new computer is already authorized.
-
Can't open gmail attachment in safari, OS X 10.8.2
Hi, I just got my new macbook air and updated to OS X Mountain Lion 10.8.2. I can't download attachments in Gmail. I click on "download" next to a file, but nothing happens. I can sometimes work around it by clicking "view", then "download original",
-
Photo titles in shared Photo Streams?
I have started to use shared Photo Streams, but find that my carefully constructed titles are not transferred to the Photo Stream – each photo appears with its original alphanumerical identifier. Is there a way I can get photos to keep their titles?