How to save 2-3 doc in one folder on ipad
How to save 2-3 doc in one folder on ipad.
Got it figured out ... but I'll repeat it here in case it helps others.
When I went to "Documents" it was always bringing me into a subfolder within (probably where I'd last been). And I think I had so many files in Documents from trying over and over that if I ever did end up there, I wasn't finding what I'd just opened because there were so many.
Thanks again for your help!
Similar Messages
-
how to save my bookmarks in a protected folder(google has an add on for favorits which will never be deleted) in case of harddisk format or computer crashdown.
The built-in Firefox Sync service allows you to store your settings, including bookmarks, on a Mozilla server. This isn't accessible as a file like Google Drive; it can only be used by connecting another copy of Firefox to your Sync account. You can read more about this here: [[How do I set up Firefox Sync?]] (I haven't tried it myself since it changed recently.)
The cross-browser Xmarks service is more focused: it just does bookmarks. http://www.xmarks.com/ (I've never tried this one either)
If you prefer working with files and you have a Dropbox or similar account, you could in theory back up your Firefox profile folder, or more particularly, the bookmarkbackups subfolder. I haven't tried that myself. To find the folder:
Open your current Firefox settings (AKA Firefox profile) folder using either
* "3-bar" menu button > "?" button > Troubleshooting Information
* Help menu > Troubleshooting Information
In the first table on the page, click the "Show Folder" button
A window should launch showing your currently active settings files. The bookmarkbackups folder should contain dated .json files which can be used to restore your bookmarks to another copy of Firefox.
Alternately, someone might have created an add-on for saving Firefox bookmarks to the cloud another way, but I haven't heard of one. -
Is there a way to set extension specific download folders in safari? aka .docs to one folder, .mov to another, etc
I'm trying to use safari to organize my downloads so i have less clutter and know where things areNothing "built in" senses file type and sorts by it that know of, and I've not heard of any third-party options.
You can have pretty good control by slight mods to how you download:
1--Set up a dedicated Downloads folder in Documents if you don't have one. Point all you browsers to that folder for catching downloads.
from here you have two options:
2A--always display that folder sorted by "Kind." That put files of similar types together
2B--within the Downloads folder, create subfolders for different file types. If you do this, instead of clicking files for downloading, right-click them. One of the contextual menu options the right-click will reveal is "Download Linked Files as...." and will force a dialog box from which you can select the subfolder that will hold that file type. -
How do I copy a photo from one folder to another one in Aperture
I'm old and feeble I cannot figure out how to copy a photo from one folder to another folder and my 13 year old grandson can't figure it out either, so I feel better about it
thanks
canonmickUm ... that doesn't seem ... like a useful workflow. When you say "folder" do you mean a Folder in Aperture (shown on the Library tab of the Inspector) or a folder in Finder? They are not at all the same thing.
Aperture is an image manager, with the requisite file management built-in. Finder is a file manager.
If you provide a full description of what are doing, and what you are trying to do, someone here can set your straight.
Fwiw, IME, the learning curve if very long and uphill, but gentle. What's unusual (esp. for Apple products) is that the landmass of Aperture is separated from the rest of your computer knowledge by a moat. What I mean is, the first leap is the hardest. After that, you'll be on firm ground, ready to explore. -
How can I restrict a search to one folder only?
The problem: I have many files with the same designation (i.e., img038.tif -- usually from a scan). I would like to search only within one folder (sometimes with subfolders, as well as files), rather than in my entire computer.
Is that possible?Finder > Preferences > Advanced > Restrict search to folder only
MacBook Pro (15-inch Mid 2012), OS X Mavericks (10.9), i7 500GB 16GB RAM iPhone5 iOS7.0.4 -
My first problem is that I need to get all of my music files in one folder, they are scattered throughout my computer and external hard drive and I am trying to get them all together. Afterwards I want to send this music to my microsd hard in my Samsung Galaxy s4, is there a way to proceed through this? Or at least one part of it?
Consolidate your iTunes Library
As for the other part of the question, iTunes syncs with Apple devices.
Simply copy the media desired from the computer to the microSD card. This has nothing to do with iTunes. -
Hi everybody how to save the inputed data in one simple list output .
here am wrting the description of the requirement ...
am displaying one report output in that output i have all my fields open so that user can directly chage the dats what ever needed or he needs.
then after changing when he will press the save button the changed data should be saved to one of the database tables ..
so can anybody please help me out how to do this requirement
this is a simple report with all fields in the output screen in input modehiiii
if you want to save the data that user have updated then use following statement on SAVE button.
UPDATE ztable1
SET C1 = 2
WHERE C2 IN ( SELECT C3
FROM T2
WHERE C4 = 0)
reward if useful
thx
twinkal -
How to save multiple new entries in one shot?
Hi,
I am working on a pretty complex Create form. So apart from the standard form fields to allow user to enter the data, one of the sections in this form is a table which allows user to create multiple entries for this entity. And when hitting the "Save" button in this form, it will save all the data plus the multiple entries defined in this table.
Is it possible to create multiple new entries in a table, and then save all of the new entries at the end? My experience so far is only create and save one new entry at a time.
Any sample?
Please advise.
Thanks.
-MinaYes, I am using ADF BC.
Let me explain more in details of the scenario:
I have a table with "Create New" and "Save" button. The "Create New" button's ActionListener is set to "#{bindings.CreateInsert.execute}", and the "Save" button's ActionListener is set to "#{bindings.Commit.execute}".
When the "Create New" button is hit, a new row shows up in the table to allow entering data inline. When the "Save" button is hit, it got committed. I would like to allow user to create multiple rows before committing. But currently, after I hit "Create New" button, then enter data, then hit "Create New" button again without committing, it gives error.
Since this table is part of a form with other fields, I would like to save/commit it until everything in the form are completed, including creating multiple rows in the table.
Any ideas how to achieve this?
Any comments are appreciated.
Thanks.
-Mina -
How to save history for more than one day. Can't find the answer. Thanks, Bil
When I click on the History tab in the tool bar it only shows History for one day or today. How can I change it to save History for 3 days?
Thanks,See:
*http://kb.mozillazine.org/Resetting_preferences
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode -
How to save multiple snap shots in one file?
Hi,
I've been trying to take snap shots using a USB camera and save the
them into one file; however, I've had no luck with the saving part. Can
anybody help me with this problem? I've attached the code I'm using in
case anybody wants to take a look.
Thank You,
Molana
Attachments:
Camera Snap Shot1.vi 100 KBHi Molana,
If you are looking to save these images to file, you can use either the IMAQ Writefile VIs, or potentially the AVI writefile VIs. These VIs are both on the FIle I/O palette of the Vision Utilities subpalette. To write an AVI file, you <b>open</b>, write to, and then <b>close</b> a session, very similar to most processes in LabVIEW.
I also noticed in your code that you are enumerating your USB cameras and closing the camera session all within the while loop. This adds a great deal of overhead and time to your acquisition process. I would recommend moving these processes outside of the acquisition loop, such that they occur once before and once after the snaps.
If you are still having trouble acquiring, I would recommend that you download and install the NI IMAQ driver. It includes examples for snapping and saving images with NI IMAQ. This process is extremely similar to that which you would use in NI IMAQ for USB.
Hope this helps!
Robert -
How to save an Idoc doc Number on PI to use it later on an ALEUD Idoc
Hi there i have an Idoc / Soap Async/Sync Scenario with BPM, i need to update the Idoc status using ALEUD idoc back to R/3, for that im stuck trying to figure out a way to save the Income Idoc number and use it later on the Response to ALEUD Idoc Type Mapping, i've been looking into the xpath thing a bit but im not sure if this is the right way to do it, Thanks in advance for all the help and ill be more than happy to follow any blog on how to do it,
Roberto.Hi there,
basically what i need is to be able to store the Incoming Idoc Number from R/3, and use it later for another mapping wether would be inside or outside the bpm
Edited by: Roberto Gomez on Jul 27, 2009 6:59 PM -
Re:How to save an uploaded file in specified folder
Hi all,
I am using Jdev 11.1.1.7.0
i created one form in the page.i created attachments by using inputfile option in component palette.when i run the page it is working.the file is successfully uploaded.but my intension is i want to save the uploaded file in specified location for the particular person.so how can i save this file.can anyone help me out please.
Thanks,
G.Shilpa.Hi Timo,
Thanks for the reply.my scenario is i have created one table and one form.i entered some data in it.i used inputfile and save button for attachments.it is working.bt it wont be saved.when i click the person and then upload a file then the file will be stored some particular location for the particular person.means when i reload this page again i click the person it want to show the person how many pages uploaded.i created one bean class in save button and inputfile.my code is
public class FileUpload {
private List<UploadedFile> uploadedFile;
public FileUpload() {
super();
public void setUploadedFile(List<UploadedFile> uploadedFile) {
this.uploadedFile = uploadedFile;
public List<UploadedFile> getUploadedFile() {
return uploadedFile;
public void saveUploadedFiles(ActionEvent actionEvent) {
// Add event code here...
List<UploadedFile> files = this.getUploadedFile();
if (files != null) {
for (int i = 0; i < files.size(); i++) {
System.out.println(files.get(i).getFilename());
if anything goes wrong can u please provide the code.
Thanks,
G.Shilpa. -
How to save a video made with adobe VOICE (for ipad) in MOVIE format
I have made a video with adobe VOICE application for ipad. Does anybody know if there's a way to save the video in .MOV format. I see that it only allows me to upload the video and share it via email, FB, Twitter or message.
Hi felipe1,
You've landed in the Acrobat.com forum, and I was going to move your post to an more appropriate forum to get you question answered, but it doesn't look like we have one for Voice yet! I did find this page: Adobe Voice - Support
And, it doesn't look like there's an option to save as .mov format.
Best,
Sara -
How to move my all files to one folder
hi, I had created different folders in the acrobat.com. Now, I want to move all my files from all the folders to a different folder. How can I do this? there is not copy or move options available. Please help..
Just to clarify, the above answer is for Workspaces (url is workspaces.acrobat.com), which is the legacy form of Acrobat.com. It should also be noted, to move files in workspaces, you can simply drag/drop files to the folder you want to move them to. You can select multiple files using control + shift key or control+A to select all
However, if you are referring to the cloud storage solution Acrobat.com (url is files.acrobat.com):
Select the files you want to move
After selecting the file(s) a tool bar will display
Click on the Move tool and choose your destination folder in the move dialog
For more information regarding Workspaces and Files.Acrobat.com, see http://forums.adobe.com/docs/DOC-3391 -
How to save PDF form to a KM Folder in Portal
Folks,
I have a requirement to save ADOBE Form to KM folder in portal and again access that form for changes.
Thanks,
ManishHi Manish
just a bit of rather high-level input: What you want is possible from a technology point of view, i.e. NetWeaver provides you with all the tools you need, but essentially you need to build an application that does all the things you want from scratch.
Interactive Forms has no standard persistence mechanism for the generated PDF forms, as the way such PDFs are handled differ from app to app, from customer to customer, and NW isn't able to accommodate all wishes. Some of the SAP applications provide mechanisms sich as storing files in KM or Records Mgmt, but this is limited.
You will need an application that
- generates the PDF
- assigns the PDF to a KM folder (after editing?)
- allows the retrieval of the PDF from KM and editing
- presumably, at some point send the data entered in the PDF back to the database (before archiving the PDF permanently?)
So the forms aspect is only one of the important ones, developing on top of KM the other.
Best regards,
Markus Meisl
SAP NetWeaver Product Management
Maybe you are looking for
-
6301 & PC Suite - "Data transfer not possible. Che...
Well, as the title says really. Upgraded from 6280 -> 6301. I use Outlook 2003 and sync contacts & calendar. Sync'd the 6280 before finalising upgrade, plugged in the 6301 with a mini-usb cable (All driver reports it installed new hardware fine) once
-
My phone has been working perfectly fine even after I dropped it and cracked the screen. Apple is saying this happened because of the cracked screen but that doesn't make sense. HELP!!! I don't have a warranty so I would have to pay $80 for new speak
-
Create new object in Designer using CDAPI
Hi, I need to create more database objects in every of my applications (issued of a migration). I try to used the CDAPI, CIO_....ins , but an error occurs , ORA-06512: at "ORACASE.JR_SECONDARY_OBJECT", line 76. I don't find sample of insert, I have a
-
Big problem with a select using remote database
Hi Guy. I have a big problem with a simple query, but this is a scenario. Actuallly I'm in Alexandria - Egypt with a server with Oracle 10.2.0.4 database 32 bit on linux Red Hat as 4.8. the server can connect to another database oracle but 9.2.0.6 in
-
Time Machine doesn't recognize old sparsebundle after new logic board
Installed new logic board in pre-Isight 20" iMac due to capacitor swelling and kernel panic. I had also erased the internal HD. I was able to restore all my files to internal HD from Time Machine backup on the 1TB Time Capsule. Now I'm trying to back