How To Save As AVI?, Or, WMV?
Hi,
I am using Adobe Premiere Elements 7.0
Is there anyway that I can save my project as a avi, or, wmv file?
I cannot see that option there?
I also have Adobe Photoshop Elements 7.0
I want to watch my project using Windows Media Player?
Can someone please help me?
Regards
Phillip
Phillip
Premiere Elements 7
Share/Personal Computer/
There you will find export routes for Adobe Flash Video, MPEG, DV AVI, Windows Media, and Quicktime. You may not see the Windows Media and Quicktime choices until you scroll down to them at their lower locations on the list.
Most of the export choices have an Advance Button in its dialog section. Click on that if you want to change the settings that you see displayed.
Also, explore the File Menu/Export/Movie route to get to the DV AVI version as well as the other choices there.
If you have not already, check out the Premiere Elements 7 Help PDF which you can get to from the program's Help menu. Lots of details there.
I suspect that you have found Share/Personal Computer, but did not see Windows Media which you have to scroll to to see. Most people run into that situation.
Please ask if any further questions.
ATR
Similar Messages
-
How to save an AVI w/ as many FPS as possible w/o color decection interfering?
Hi,
I can't seem to solve this somewhat basic programming logic problem: using a CCD I want to detect a color change in real time (at any FPS rate >10 FPS) and save the video with as many frames per second as the camera can give (71 FPS or as close to it as possible).
The camera is up to 71 FPS but my color detection takes too long to run one iteration of the while loop so I only get effectively 10-11 FPS in my AVI file. 10 FPS is acceptable for the detection response but ideally I would also save an AVI of the process at 71 FPS for historical record that can be further analyzed. I realize what I need is a way to quickly run the 'save to avi' on every available frame (71 FPS) and then in parallel sample 1 in every 7-8 frames for image detection processing (to get the 10 FPS the coding/CPU+RAM limits it to). I can't seem to write a program that can do the two in parallel without the color detection bogging down my save to AVI or without getting some sort of camera session invalid error.
Someone more clever and experienced please share some logic with me. My attempts with different while loops or conditional case structures just arent improving the FPS. I have attached the most basic version of my program; it achieves what I want but the FPS in this case are going to be equal in both the dection and avi.
Thank you in advance for your time and patience, I am just a student in over my head as usual....
-KR
Attachments:
Final Live Detection with save_one loop.vi 101 KBI formatted the code to fit the producer consumer loops but I am not seeing any improvement in the frame rate / frames per second. The way I set it is that every 4th loop iteration of the 'save to avi', one frame gets passed to the detection. Unfortunately I am still only getting about 12-13 FPS and it doesn't get faster as I decrease the amount of frames passed to detection.
Because I didn't see any improvement I ran the 'save to avi file' sequence in its own VI. I found with out any color detection the resulting AVI is still only 12-13 FPS. This means the very simple program (attached) is running much too slow yet I don't see any other way of aquire images and making it into a movie; I am only using the basic IMAQ dx subVIs. Can anyone offer a solution or improvement? Is this data handling or memory related? I am on a fairly new PC...
Thanks in advance
-KR
Attachments:
Save to Avi.vi 58 KB -
How to convert Mod/Tod video to AVI/MPG/WMV/MPEG
question:
1: What is .Mod and .Tod video?
2: How to convert .Mod and .Tod video to AVI, MPG, WMV, MPEG?
Answer:
1: .Mod and .Tod videos are mainly produced by digital harddisk camcorder such as JVC camcorder and so on. It is not common video formats and can only be played on some special players.
2: Now there is one professional Mod Converter that can convert .Mod and .Tod video to AVI, MPG, WMV, MPEG now. Aiseesoft Mod Video Converter has super conversion speed and excellent image/sound quality.
The following is a step-by-step guide on how to handle the conversion.
Step 0: Install and run Aiseesoft Mod Video Converter.
Step 1: Add files
Click “Add File” to add your video files.
Step 2: Set output video format
Click “Profile” button from the drop-down list to select the output video format such as AVI, MPG, MPEG and WMV. You can click the “Settings” button to set parameters of your output video such as Frame Rate, Bitrate to get the best video quality as you want.
Step 3: Click the “Start” button to start the conversion.
Tips:
1: How to join your Mod/Tod videos
If you want to merge several Mod/Tod videos into one file you can choose them and click the “Merge into one file” to do it.
2: How to split your Mod/Tod video
The “Trim” function also servers as a video splitter. You can set the “Start Time” and “End Time” to set the time of the clip or you can directly drag the slide bar to the accurate position. After cutting your Mod/Tod videos into small clips you can upload them to YouTube, Myspace and so on to share your video with people of the world.
3: How to crop your Mod/Tod video size
By using the “Crop” function you can crop the black edge of your video and you can also drag the line around the video image to adjust your video to your mobile devices. With it you can enjoy and share your DV with other people anytime and anywhere.
4: How to save your favorite picture
If you like the current image of the video you can use the “Snapshot” option. Just click the “Snapshot” button the image will be saved and you can click the “Open” button next to “Snapshot” button to open your picture..mods are (somekind of) mpegs ...
At first I though he was talking about the ancient audio .mod files:
"The first version of the format was created by Karsten Obarski for use in the Soundtracker tracker released for the Amiga computer in 1987".
http://en.wikipedia.org/wiki/MOD%28fileformat%29
Oh, nostalgia ain't what it used to be! -
Avi or wmv files wont automatically save (tick box option is not selectable)
avi or wmv files wont automatically save
(tick box option is not selectable)
i go to options
and select SAVE as the default for .avi and .wmv
FF always asks me what to do every time?
if i click save, the tick box option for 'always do this' is not selectable ?
How do i fix this so i can automatically download .avi and .wmv?
ie ........i click a link ..........it downloads......like other file typesTry this:
It works for ALL types of files!
# Save a small avi file on your harddisk
# Open Firefox
# Go to File | Open File ...
# Go to the file location and select it
# Click Open
# Now you see the small window named Opening …
# Click radio button Save
# Tick box “Do this automatically for files like this from now on.
# Piruz bāshid! -
How do I save an avi from images acquired through buffers?
Hi all,
I recently have started using Labview, mainly for IMAQ purposes. I started by learning how to save images, then how to do just avi's. Now the problem comes up is that I want to find a way to average a bunch of images together in real time. So that as the program runs (I dont have to actually be recording) I can have an out put of what the camera sees, just with maybe 10+ frames averaged together. Best way I could think of doing this was using buffers and then adding them all together before it starts to write overtop of them again. But how can I save that summed picture? I try to take that result and run it to an image on the front panel (which works) but when I go to save it to avi or something it says that I can not convert buffer images, also if I try to do the copy buffer it gives me that the image needs to be released. I will attach sort of what I have now, though it does not work.
Any ideas would be helpful. Thank you all very much!
-Dave
Attachments:
SummingPics.vi 164 KBThis may not help at all...
But have you thought of not using buffers?
Since you're using the IMAQ package anyway, if you don't need a super high frame rate why don't you just grab individual images put them into a shift reg. and sum for x=n, then plop that summed image to a new imaq image to save and start over. I say this because if you're only trying to grab an avi for the individual images why not just grab the individual images as jpgs or whatnot and save yourself the trouble? -
How to convert mov to avi or wmv
Hello,
I just caught a short 30 second clip of my son crawling for the first time with my Canon camera. I want to send the video to my Mom via email however the file is too big. Her computer does not play mp4, which is the only conversion option I found, and walking her through installing a compatible player is useless. So I would like to find out how to convert the mov file to avi or wmv, small enough to email. I just purchased Premiere Elements 10 and never used it. I could not figure out how to do it, so if anybody knows, that would be great.
Thanks.>just purchased Premiere Elements 10 and never used it
Online User Guide http://helpx.adobe.com/premiere-elements/archive.html
Importing Video http://forums.adobe.com/thread/1065281
-and project settings http://forums.adobe.com/thread/1112086
Saving & Sharing http://forums.adobe.com/thread/1137128
-Sharing to DVD or BluRay http://forums.adobe.com/thread/1137645
-Sharing for Movies http://forums.adobe.com/thread/1051093
-Sharing for Computer http://forums.adobe.com/thread/1058237
Steve's Basic Training Tutorials... steps are the same for several versions
-http://forums.adobe.com/thread/537685
-v10 http://www.amazon.com/Muvipix-com-Guide-Premiere-Elements-Version/dp/1466286377/
FAQ http://forums.adobe.com/community/premiere_elements/premiere_elements_faq
TIPS http://forums.adobe.com/community/premiere_elements/premiere_elements_tips -
I'm actually using Adobe Premiere Elements 10.
rayssasouza
There is no "Publish+Share" in Premiere Elements 10. Publish+Share/ is the Premiere Elements 11 and 12 counterpart of Premiere Elements 10's Share/.
If you have established your Premiere Elements 10 (assumed Windows 7, 8, or 8.1 64 bit) Timeline, you can export that to an .avi file and .wmv file and many other formats from the Share area. Remember, .avi and .wmv are just file extensions that wrap the video and audio compression, so, when deciding on export choices, good to keep in mind all the properties that you seek for your export. All that being said...
General idea....
For avi file...
Share
Computer
AVI
and then you set for the appropriate Presets.=
For .wmv file
Share
Computer
Windows Media
and then you set for the appropriate Presets =
I suspect what generated your question was that you are not seeing the AVI and Windows Media choices under Share/Computer/.
If that is so, you need to use the thin scroll bar to the right of the choices and scroll down to AVI and Windows Media to see them
and others toward the bottom of the list there.
Please review and consider. Any questions or need clarification, please do not hesitate to ask.
Thank you.
ATR -
How to play an avi in 10.8.3 Quicktime Player
Since 10.8, I can't play avi in QT Player 7.6.3 or 10.2. Mostly, there is no sound.
I've installed DivX, XviD, QuickTimeMPEG2, Perian. Still no sound on either QT Player.
VLC works fine.Video works, sound doesn't.
I don't know what the "16" plugins are but I have 32:
AC3MovieImport.component
AppleAVCIntraCodec.component
AppleHDVCodec.component
AppleIntermediateCodec.component
AppleMPEG2Codec.component
DC30Xact.component
DesktopVideoOut.component
DivX Decoder.component
DivX Encoder.component
DVCPROHDCodec.component
DVCPROHDMuxer.component
DVCPROHDVideoDigitizer.component
DVCPROHDVideoOutput.component
DVCPROHDVideoOutputClock.component
DVCPROHDVideoOutputCodec.component
FCP Uncompressed 422.component
FLACImport.component
Flip4Mac WMV Advanced.component
Flip4Mac WMV Export.component
Flip4Mac WMV Import.component
iChatTheaterPreview.component
IMXCodec.component
LimitOffsetDH.qtx
LiveType.component
Motion.component
Perian.component
QuickTimeMPEG2.component
Save as AVI.component
SoundboothScoreCodec.component
XiphQT.component
XviD 1.0 Pref App
XviD_Codec 1.0 alpha.component -
How to save movieclip to pdf in AS3.0?
Flash actionscript3.0
How to save movieclip to pdf ?
Thanks in Advance.Thanks in Advance.
one more question
how to convert to flash file to avi file, with highquality. -
How to save an edited video clip in premier elements to my organizer so that I can add teh edited video clip to my slide show on windows 7 operating system?
sanford5
This is not Adobe. We are Premiere Elements users trying to help other Premiere Elements users with their Premiere Elements workflows. Under those conditions, only Adobe may have the opportunity to access your computer in troubleshooting session between you and them. You can use the following link to contact Adobe via its Adobe Chat.
http://helpx.adobe.com/contact.html?product=premiere-elements&topic=using-my-product-or-se rvice
When the link opens, click on the statement "I still need help" to bring up Adobe Chat.
I have no idea if they will charge you a fee for the service ($40 US dollar/hour). It might not even help you (fee or no fee) because you do not have the latest version of Premiere Elements.
What you ask is easy enough. Let me try again with a step by step to see if we can get this working for you in principle and then fine tune the details.
1. Export your Timeline to a file, using Publish+Share/Computer and then one of the choices
Adobe Flash Video, MPEG, AVCHD, AVI, Windows Media, QuickTime, Image, Audio. I do not know what your project settings are, but I am going to guess at NTSC/AVCHD/Full HD1080i30. That would represent 1920 x 1080 @ 29.97 interlaced frames per second.
The following is going to be a mini test run in principle so we will cut to the core and overlook some things.
Go to Publish + Share/Computer/AVCHD/ and set Presets = MP4 - H.264 1920 x 1080p30.
Note that there is a field for Save In: near where you set Presets. Set the Save In for Libraries/Documents not C:\Program Files\Adobe\Adobe Premiere Elements 11. Keep out of the Program Files for matters such as these.
Go to the Elements Organizer 12 File Menu/Get Photos and Videos/From Files and Folders and then browse to and select your MP4 file that you have saved in Libraries/Documents.
You now should have your video represented in the Elements Organizer 12 with a thumbnail.
Please let us know if that works for you. If not, then please let us know where you need supplemental help to get the task completed. I will re-write if necessary.
We will be watching for your results.
Thank you.
ATR
Add On...A little side note for later...If you took your file saved to the computer hard drive and imported that back into Premiere Elements with Premiere Elements' Add Media/Files and Folders, you would get
a. the file imported into a new project
but also
b. a copy of the file automatically placed in the Elements Organizer 12.
If the ideas seem overwhelming, please take the steps on one at a time and follow exactly what is written. You should do fine. -
Exporting fla to avi or wmv on a Mac
I just completed my first Flash animation using Flash CS3 on
a Mac. I need to deliver it as either a avi or wmv file. Can
someone please help me with this. Do I need an intermediate piece
of software?
ThanksI have that SAME exact question. I've output .fla to
Quicktime .mov (with no compression) and the software it's
ultimately going to for NTSC/broadcast use (Velocity) plays it
triple time or something. AVI files it can evidently handle. How do
I provide AVI? (And yes - I'm on a Mac. Seems the PC version offers
AVI option.) -
Hi, i'm a beginner with labview and i'd like to know how can i do to save movies on my computer from my program.
you can have a look on what i use now. I already tried to adapt the example of "grab & save to AVI" but i really don't know how to do.
Is somebody anywhere who can help me ?
kind regards
Cedric
Attachments:
Sans titre.jpg 166 KBHello Cedric,
First, can you please describe the hardware you are using? By movie, you mean the images a camera returns to your computer? What kind of camera do you use? (Firewire/IEEE1394, analog, CameraLink, USB). And finally, what is the purpose of your LabVIEW application?
Cordially,
.mrLeft{float:left} .mrInfo{border-left:solid 1px #989898;font-size:x-small;color:#989898}
Mathieu R.
CTD - Certified TestStand Developer / Développeur TestStand Certifié
CLAD - Certified LabVIEW Associate Developer -
Hi everyone.
I am building a simple VI that grabs images and saves them to an AVI file. I am using IMAQdx and the Vision Development toolkit on Win7Pro 64bit.
The challenge is that the standard "Save to AVI" functions in the 64bit Vision Toolkit appear to be malfunctioning accord to this thread. It only lets you choose from 1 of 2 codecs. I have installed tons of codecs, but I can't seem to use them. Tested it on two different machines. The only two codecs that are appearing when calling "IMAQ AVI Get Filter Names.vi" are DV Video Encoder and MJPEG Compressor codecs, which is kind of strange.
So my challenge: Is there some kind of workaround? Any ideas how I can save an AVI in a different manner? Or how I can get more codec choices?
Thanks!Assuming the problem is a lack of 64 bit codecs (most codecs are 32bit, which makes them unavailable to 64bit programs). Then if you're desperate you could try the SVN version of ffdshow tryouts of which there is a 64bit version.
ffdshow download page
I use an older 32bit version, and takes a bit of work to setup. Which codec you use is set through the ffdshow VFW control panel, LabVIEW just uses the "ffdshow Video Codec" filter. I use the loss-less HuffYUV codec then compress that file later with mencoder. Of course using a bleeding edge SVN copy could be buggy. I'm not sure if it's needed but on my setup I have LabVIEW.exe and the name of my compiled executable in ffdshow's white list (under video decoder configuration/Direct Show Control/Use ffdshow only in).
Another option is to have the video compression handled by a separate 32 bit LabVIEW program. You would need to pass the frame information between the two programs. I would probably use IMAQ Flatten to string and TCP/IP to do most of the work, all this copying data around will probably slow things down quite a bit though. -
how would i beable to play AVI and WMV in quicktime. ive been trying to get the answer so i can change these files to an ipod format any help would be great.
QT does not read wmv files so you would have to use some other software to first convert it to a format QT can read. QT does read avi files but does not come with a lot of the codecs people use for avi files. If you have a Video for Windows codec for the avi format you could open it with this freeware Windows program and export it to uncompressed avi for QT to then convert. VirtualDub
You may also be able to use this freeware WIndows program to make iPod videos. I haven't used it myself but other posters have stated that it works with some formats.
http://www.videora.com/en-us/Converter/iPod/ -
Can you get an iMac to play .AVI or .WMV video?
I can't find a list of supported codecs on Apple. I have a ton of video files in .AVI and .WMV formats. I don't want to spend days converting to Quicktime to be able to share video clips with a friend who owns a Mac. My camera shoots in .AVI.
I've been thinking about getting a Mac, but would that mean any video I shoot in the future is automatically incompatible with Mac? This would seem to be a common format (the .AVI), anyone know why it's not compatible?
Any ideas on how to work around this problem? Thanks
answered--thanksPerian or Flip4Mac can handle some but not all files of those types. AVI is a container, not a format, and therefore nothing is assured of opening all AVIs. Some WMV files contain DRM and can't be used in Mac OS X.
(61521)
Maybe you are looking for
-
Won't let me login, error message "unspecified error"
Every time I try to login with my sync account (that I'm already sure works because I've used it on multiple computers and Firefox profiles), then I get an error message that says "unspecified error." I know that all my information is correct, and I
-
Hi, Iam new to oracle. When I give the below query at SQL prompt. SQL> select col1||'`ß`'||col2 from tablename where rownum<2; 1-J7WGX*`ß`*1-7OKC-23 Iam getting ß within appostropies...... If I remove appostropies and give the query it is throwing an
-
Mms not working to non iPhone contacts since iOS 7?
Hi there, Hope someone can help me out. Since the upgrade, I can't send any mms to non iPhone contacts. I have contacted my provider and they asked me to configurate my phone and manually put in APN, mmsc, proxy etc... But I can't seem to find it on
-
After connecting my iPod Classic 160 to a YamahaRX-V471 receiver
My iPod has no music, no audiobooks, no nothing and it is not recognized by the iTunes that I have installed on my 2 computers. I have not been able to do the 5 R's. What can I do??? Serial No 8K935JU19ZU.
-
OID - LDAP:error code 19 -Admin domain
Exception creating Entry : javax.naming.directory.InvalidAttributeValueException: [LDAP: error code 19 - Admin domain does not contain schema information for objectclass person.]; remaining name 'cn=oriondes,ou=servidoresmiembro,ou=internos,cn=users,