How to "save as" in Preview?

I recently upgraded to Mountain Lion, which apparently has also resulted in changes to Preview. Now there is no "save as". How the heck am I supposed to save an altered copy of an image? I don't want to save the alterations on the original image!

If you are running 10.8.2, click File then press the Option key to show 'Save As' in your File list of commands.

Similar Messages

How to save a Print preview.

Hello,
I would like to know how i could save a Print preview in SAP R/3.
Regards,
Lina

what do you mean by saving print preview of PO ??
Its only Preview , you can not save it, you can take only printout

How can save/convert a preview file into a Microsoft Word/.doc file?

Basically, I've open some email attachments and they've opened in 'preview'
I have tried to save them as a .doc file so that I can open them in Microsoft Word, but have been unable to do this.
I have tried 'save as...' but it doesn't come up with a .doc option
I have also tried the 'Open with' in the get info pop up, and have changed it to microsoft word but when I then try to open it, it comes up with a 'Convert File' box.
I have tried some of the options available but none of them work
Am I missing something? or am I going down the wrong route?
Is it even possible to do?
I'm not great at computers and so answers with obvious steps would be great!
Thanks!

Are these PDF files that you're attempting to save a .doc (or .docx) files. Preview won't do it. You can use a number of third-party application to accomplish what you want, but none of them are that inexpensive.
The least expensive application may be PDFpen - you can save Word documents from PDF files with it, amongst other things.
Good luck,
Clinton

How differs soft proofing in View - Proof Colors and Save for Web - Preview?

Hi, I'm currently confused with one inconsistency. My working space is Adobe RGB and I use calibrated monitor. After I finish my work on image I go to View -> Proof Colors -> Internet Standard RGB. Image looks terribly with the overall violet/purple hue. Then I open Save for Web dialogue, I check Convert to RGB and from Preview options I select again Internet Standard RGB. Now the previewed image looks as expected. The same results I get if I manually convert image to sRGB before soft proofing and saving for web. So... what's the difference between preview in Proof Colours and in Save for Web? Thank you for your opinions.

Hi 21, thank you for your input. All what you say makes perfect sense, it is exactly how it should work and how I expected it works. My problem was, that while testing this theory in practice, I have come to different results. I expected, that if I stick to the theory (meaning keeping in mind all rules you perfectly described) I should get the same result in both soft proof and save for web preview. But... it was not the case. Save for web preview offered expected results while soft proof was completely out of any assumptions and colours were totally over-saturated with violet/purple hue. Also, Edit -> Assign Profile -> sRGB gave another result then Soft Proof -> Custom -> assign sRGB (preserve numbers), but the same as save for web preview. What troubled me was why this is so.
Today I've made tests on hardware calibrated monitor and... everything works exactly as you describe and as I expected.
Then I went back to another monitor which is software calibrated (both monitors are calibrated with X-Rite i1 Display Pro). And again... I received strange results described above. So I did the last thing I thought and disabled colour calibration on that monitor. And suddenly... both soft proof and save for web preview gave the same result.
Probable conclusion: soft proof and save for web preview (together with Edit -> Assign Profile) are programmed to use different algorithm which is evident on standard gamut monitors with software calibration. Question can be closed.
Gene and 21, thank you for your effort.

How do I save with iLife preview??

The first time I saved a track it asked me if I wanted to save with iLife preview and I said no. Now I have a track that I NEED to save with iLife preview and I can't figure out how! PLEASE help asap this project is due very soon.

How do I save with iLife preview??
turn it on in GB's prefs.

Figured out how to print to 11x17 with Acrobat (but how to save or do this in Preview?)!

after about a year and a half of doing the digital equivalent of walking into a very large building that is totally blacked out - and bumping around endlessly until i found a light swich - i am not able to print to 11x17 out of Acrobat on the Mac.
i have posted the steps below and when i recover from this herculean taks i am going to try and tackle printing to 12 x 18.
i just took another look at PREVIEW and i am afraid that it is going to take me another year and a half to figure out Preview and/or Numbers etcetera - so if anyone has any tips on printing to 11x17 or 12x18 in these two programs i would be uber happy to get the instructions for this.
also, if has ANY IDEAS on how to save this set of preferences so that i can simply print to 11x17 without going through all of these steps each time it would be great. i have not figured out how to save the presets and it is going to make me unhappy especially when i have to print 20 pages at a time.
thanks!

here's documentation on getting 12 x 18 plots out of this machine.
LET ME KNOW IF YOU FIGURE OUT HOW TO SAVE THESE TO A PRESET.
thanks...
https://discussions.apple.com/message/23217426#23217426

How to save landscape print layout for report designed in SQL Server 2005

How to save page setup for a report wich was designed in SQL Server 2005 RS? Each time report is previewed, I have to change portrate to landscape orientation and left and right marging from 0,5 to 0,25, to be able to see all fieldas on the report.
Thanks!

Hi, Marina;
Which version of Crystal Reports are you using? Once you set a report to Landscape, and save the report, it should stay that way, unless you change to a different printer.
Regards,
Jonathan

How to save the instance in standard lead from custom business object

Hi Experts,
I am unable to save the instance(Record) in standard Lead business object from custom business object.
Steps:
created one custom business object with mandatory fields for creating instance in standard lead.
in quick create screen i bind data elements to standard lead business object elements.
issue:
when i click on preview i am getting exception as Arguments not found
can you please tell me that How to save the instance in standard lead from custom business object with step by step .

Hi Vijay,
Please refer this link under that mentioned that how to create lead using ABSL code
Web 2 Lead in SAP Cloud for Customer, step by step - Part 1 - myCloudDoor myCloudDoor
Under the "Action-CreateLead.absl" mentioned how to create lead
the above link for convert web 2 lead functionality and under they create lead using web data from ABSL code.
Regards,
Mithun

How to save RAW edits as 16-bit TIFF? Can't find in Aperture, easy on iPhoto

In iPhoto there is "advanced preferences" options to save RAW edits as 16-bit TIFF. Where is this option in Aperture?

I suppose I do not understand how Aperture saves processed RAW photos then; in iPhoto by contrast, the default saves them as JPEG unless the TIFF option is selected.
If you are shooting RAW, Aperture will always store the original RAW file and the sequence of adjustments to produce the image version. It does not render the edited image and create an image file. Only when you export the edited image or share it, will a file of the processed image created.
All editing is always done starting from the RAW file and adding all adjustments. You will see the resulting image in the browser, but the rendered image file will only be created when you need it outside Aperture, and then you can select a suitable export preset. Edited image versions do not take up much extra space, only for thumbnails and optional JPEG previews.

Where is " SAVE ALL " in Preview?

In M. Lion, " Save All " in Preview disappeared, so how to use this function after editing a pack of photo???

This has not been my experience.
When, in this test case, I select and change the size of 4 image files, and the do as you say, clicking on "Save" in the drop down menu under "File" while all are still selected, I do see the file sizes change in the folder they're in.
However, when I close the window (above), then the laborious saving of each, individual file still pops up, and one by one each must still be saved.
It was so much easier just to "Save All" before. This seems to fall under the proverbial, 'fixing what ain't broke.'
Either I'm not explaining myself clearly, or I'm not clear on some simple step/s here ... or Preview has, indeed been made harder to use.

How to save image in database

hi ,
I am developing a application. i want to upload image with person's details and save it to database. How to do this? I hv got tutorials for uploading image but want to know how to save it to database table along with person's details.
Thanks in advance.
Regards
Rajaram

1.Go to transaction SE78.
2.Select tree menu: Form Graphics -> Stroed on Document Server -> Graphics General Graphics -> BMAP Bitmap Images
3.Select <IMPORT> to import bitmap image file to SAP. System will popup screen for input file information and target name.
4.Select <Tick> After you already input data. System will upload image and return message to tell you success or fail.
5.You can preview the picture that uploaded by select<print prv>
If u want to store the images and retrive it from the server corresponding to the person id then just save the image by person id and code it as per the requirement.
U can save ur images using se78 and also u can c it using TCODE AL11.By navigating thru the exact path u can get the images.

How to save up storage room in lightroom 5 on a mac?

How to save up storage room in lightroom 5 on a mac? I moved all my pictures on an external hard drive, because I knew there will be the option of creating smart pictures to keep on editing if the hard drive was offline. I wanted to free my laptop of the heavy RAW-files. What do I have to chose? Which preview mode? Which smart previews?
+ Is it possible to edit smart previews in photoshop while the EHD is offline?

You definitely need the smart previews to edit pictures without the connection to the EHD. If you just have the normal previews, you'll be able to see the preview, but you won't be able to edit in the Develop module.
Regular and smart previews are smaller than the original images, but if you have huge amounts of any sort of preview the file size will go up. If you're that concerned with disk space, then you can just do the smart previews for the folders or images that you want to edit while disconnected, and then delete the smart previews when you're done editing those images.
What I've been doing lately is having a "working" Lightroom catalog that has my active projects only. I keep that catalog on Dropbox so I can share it across machines, and since I only have the free account, I want to keep the file size of that catalog as small as possible. So new imports go in to this catalog with smart previews, I edit them, and when I'm done with that project, I migrate the project in to my "full" catalog without the smart previews. So my working catalog stays as small as possible, I get the benefits of smart previews, and I keep my footprint small.
Since I'm moving things in and out a lot, I optimize my catalog once a week just to make sure I'm not keeping a bunch of trash around.
In your catalog settings, you can also change the size of your previews and change how long you keep them. You can also discard all your 1:1 previews by selecting images/folders and selecting Library > Previews > Discard 1:1 Previews.
At some point, though, all the shuffling around might get to be too much work, so it may be worth looking at cleaning up disk usage elsewhere so you can find a nice balance.
Good luck!
Dave

Please give us back "Save as" in Preview

I typically save high-quality PNG images from my 3D software, but send clients JPG images as proofs, during a working process.
The lack of "Save as" in Preview means extra steps for me now. I have to first create a "duplicate", then save it. "Versions" is a wonderful idea, but please let us have "Save as" too, so I can keep my faster workflow.
(I've submitted this directly to Apple, but in case staff members read these posts, thought I'd add it here too.)
Thank you.

Sorry LionDeveloper but I'm not buying that explanation. What more do I need to know about "how files work"?
I've followed 4 or 5 "how to" suggestions including Duplicate but none will allow me to actually save my resized image. I can get to the Save dialogue box but when I try to save the resized image it tells me I don't have permission to save it.
I am so incredibly frustrated with this I'm seriously considering reverting back to Snow Leopard!
For now I'm having to do all this work on my PC because I can't do it on my Mac anymore (since upgrading to Lion)!
Signed,
One (now) frustrated Mac user
EDIT: OK, I've found that "Export" will allow me to reduce then save like I want to do but I still want the old "Save As" functionality back. Thanks

Help with how to save/export nave to DW from Fireworks

Hola
I have made my first menu in FW CS5 with rollovers and a drop down, that works beautiful (to me )
My problem is when I save it, how can I save/export to DW?
Should I go to file/export?
Should I go to file/image preview?
What about the rollover images?
Which folder should I save them in?
Direct to DW?
I'm lost
My site it's already upload (the first page)
and the menu looks ok, everything works, but If I need to modify it, I got soooooo confuse, that
I end up deleting everything and start from scratch (not good for my sanity)
So, I would love some help please.
I'm new at FW CS5 but I thing that its going to help me a lot
Thanks
Daniel Ulysses

Hola Linda
Thanks a lot, I'll try it.
I made the menu bar in FW, (my first ever) and in FW, everything looks great
even my drop down menu, but cannot find out how to save it.
If I need to change something, then, nothing works.
Thanks again
Saludos
Daniel Ulysses

How to save a numbers file to a pdf file of multiple pages instead of one giant long page?

How to save a numbers file to a pdf file of multiple pages instead of one giant long page?

Hi DW,
Numbers 3.2.2
Instead of Menu > File > Export To, use Menu > File > Print...
That takes you to Print Preview.
In the Print Setup panel, Click on the Print... button lower right (it won't print yet).
That opens the Print Dialogue.
Click on the PDF Pop-Up Menu lower left.
Choose Open PDF in Preview or Save as PDF.
That will have page breaks and will be full sized.
Print from Preview.
Regards,
Ian.

How to "save as" in Preview?

Similar Messages

Maybe you are looking for