How to save data for Binded Matrix  in Sqlserver200(DB)

hai all,
i  created a Form by using Udo form generator.
in that i bind the matrix with Userdatsources. its successfully binded to the matrix. but when i press "Add" Button the Sqlserver tables are not saved.
if i enter values manually without binding the udo matrix, all rows are getting saved in sqlserver successfully.
plz help me how to save the rows in the binded matrix to the tables in Sqlserver.
Regards,
Nagababu.

Since you are using UserDataSources, you have to construct a function that loops through the columns, and by name and or alias you construct the INSERT and/or UPDATE query (assuming the destination table is User Defined).
Check out this link
Re: Matrix Processing
Hope it helps

Similar Messages

  • Could u plz help me to find simple example for how to save data file in a spread sheet or any other way in the real time controller for Sbrio 9642 using memory or usb flash memory

    Could u plz help me to find simple example for how to save data file in a spread sheet or any other way in the real time controller for Sbrio 9642 using memory or usb flash memory

    Here are a few Links to a helpful Knowledge Base article and a White Paper that should help you out: http://digital.ni.com/public.nsf/allkb/BBCAD1AB08F1B6BB8625741F0082C2AF and http://www.ni.com/white-paper/10435/en/ . The methods for File IO in Real Time are the same for all of the Real Time Targets. The White Paper has best practices for the File IO and goes over how to do it. 
    Alex D
    Applications Engineer
    National Instruments

  • How to save data in ztable after editing in alv report

    how to save data in ztable after editing in alv report?

    Hi,
        Please find the attachment below.This may be usefull to you.
         [http://wiki.sdn.sap.com/wiki/display/Snippets/ALV-Editingandsavingtheeditedvaluesin+Database%28OOPS%29]
    Regards,
    Ramakrishna Yella.

  • How to populate data for 2LIS_40_REVAL, 2LIS_43_POSCAS and 2LIS_44_POSREC

    Hi
    How to populate data for 2LIS_40_REVAL, 2LIS_43_POSCAS and 2LIS_44_POSREC datasources at RSA3?
    I'm very new to retail BI.
    I think there is no setup tables for Retail infosources.
    Any IDoc or BAPI activation is required or other procedure?
    We are in BI-700 SAPKW70015 support pack R/3 side
    and SAP_BW 700 Support pack SAPKW70016 &
    BI_CONT 703 Support pack SAPKIBIIP9 BI side
    Can anyone guide me how to load data?
    Points assured
    Thanks in advance
    Ramana P

    Dear Ramana,
    There is no setup table for POSCAS and POSREC.This has to be popuated with a BADI Implementation. 
    As of PlugIns 2002_1_470 and 2002_2_470, POS data is update into BW the 2LIS_44_POSREC and 2LIS_43_POSCAS extractors using a BADI. To be able to update data into BW, the relevant implementation for the BADI must be activated in each case. You can activate the implementation in transaction SE19. The implementations are as follows:
    POS_EX_REC_PI2003_1 for extractor 2LIS_44_POSREC
    POS_EX_CAS_PI2003_1 for extractor 2LIS_44_POSCAS
    Once the activation of BADI , create the back ground jobs for the 44 application and the data is pushed into Delta queue and it can be loaded into BI .
    Hope this helps you.
    Thanks,
    Krishna Charan

  • How to save data model design in pdf or any format..?

    how to save data model design in pdf or any format..?
    i ve created design but not able to save it any mage or pdf format

    File -> Print Diagram -> To PDF File

  • HT4623 how to recover data for contacts on iPad mini

    how to recover data for contacts on ipad mini?

    You don't give much info to go on. Do you sync your contacts?

  • IDOC: How to fill data for sub segments ?

    Hi,
    I have 3 segments, segA , segB , segA1 . segA1's parent segment is segA . segA and segB are at the same level .
    How to fill data for segA1  ? can you give some sample code ?
    Thanks a lot !

    hi,
    You can fill the segment in the sequence in the idoc either parent or child.
    In you case first fill parent segment SEGA next SEGA1. Then you can fill the SEGB.(If segB is deifned as next segment of segA in the idoc structre)
    Thanks and regards,
    shyla kumar

  • How to fetch data for sales order costing

    Hi All,
    How to fetch data for VA03 --> Extras --> Costing having cost element details.
    Thanks
    Gaurav

    Hi Gaurao ,
    There is no such function module  to extract data  in one column   , you have to  Convert all the columns data    in one column
    for period   .
    regards
    Deepak.

  • Can Someone please tell me how to save movie for email & web?

    Can Someone please tell me how to save movie for email & web? I have created a few small videos, (last one was only 3 minutes), and I have tried to save them many different ways, but when I try to send them via email, it takes forever to send and for others to open.
    People send me video links all the time, and they never take that long. What am I doing wrong?
    Thanks for your help.
    Sharona

    People send me video links all the time, and they never take that long...
    Karl is (aside many other things) expert on how-tos and codecs, but one more thing...:
    video link:
    you have two options for sharing video with the world: you can send the whole file to someone - as an xx MB attachement to a mail...; or, you load up the video to some website (.mac, youtube, whatever...) and send just the link x kB to that site...
    asymmetric:
    normal "internet accounts" are asymmetrically (A-DSL)... means: you have FAST downloads, but SLOW uploads.... (my socalled 2k-DSL connections offers downloads 20x faster then my uploads, just to give you an impression...)
    so, uploading my videos to my website needs easy >30min for a letssay highly compressed 2min project.... the link to it is just >1kB; the download/watching of the movie is almost instant on/realtime....
    now, back to Karl, concerning choosing the right codec/compressor... Karl?
    i DO love these phrases in news-shows...

  • How to fill data  for asset accoutning datasources

    hi gurus
    i want to know how to fill data for the FI:asset accounting data sources.As these datasources are not related to Logistics,i think filling setuptables concept doesnot come into picture here.thenhoe to  fill data for the datasources:0FI_AA_001,0FI_AA_005,0FI_AA_006
    Pls give me some inputs ASAP
    Its very Urgent
    Thanks in Advance
    Surya Reddy

    Hi,
    Asset Accounting works with Timestamp mechanism.  No Setup table concept like logistics.  Find the prerequisites for AA extraction.
    For Asset Accounting Delta Extraction you first need to have this BADI - FIAA_BW_DELTA_UPDATE active in the system:
    Check the link below for more details about the badi and the delta extraction procedure.
    http://help.sap.com/saphelp_nw04/helpdata/en/a8/f4153c4eb5d82ce10000000a114084/frameset.htm
    Sequence of Data Requests
    For summarization of line items by master record characteristics (such as cost center) during posting of ODS objects to Info Cubes, master data must already exist prior to extraction of transaction data.
    Also the following sequence must therefore be kept to during extraction:
    1. 0FI_GL_4 General Ledger: line items (if required)
    2. 0ASSET_ATTR_TEXT Asset sub number (flexible updating)
    3. 0ASSET_AFAB Depreciation area real or derived
    Then the transaction data
    0FI_AA_11 FIAA: transactions and / or
    0FI_AA_12 Posted depreciations (period values)
    Hope it helps
    Regards
    Srikanth

  • How to bring data for newly aciated datasource in a Application componenet

    Hi ,
             i have 2 data sources(application component 11) are active in production system. and  delta load is running for them.
    Now we have a requirement that we need to activate the 3rd datasource in the same application component 11.
    so, how to bring data for the newly acivated datasource. Do i delete the setup table data and again run statistical setup and run the init for the three data sources?
    how to do?

    Hi,
    To bring the data for the new data source you need to delete the data from setup tables and need to fill up again. before filling up the tables, its better to load the delts for other 11 application components data.
    Your deltas will come from delta queue, by deleting the setup tables, you will not impact your delta loads.
    So just fill up setup tables and run your init package. it will extract the data.
    Thanks
    Srikanth

  • How should restrict data for particular month?

    Hi Experts,
    How should retrieve data for particular month without where condition.

    Hi,
    You must be having Month Object right in your Webi?
    User will be given opportunity to Select his/her required [Month]
    Create variable as =Userresponse("Enter value for Month")same text as you are giving in the Prompt text....Name it as [UMonth]
    Go to analysis tab..Filter..Add filter...[Month]=[UMonth]
    always this report will run for the month user require

  • Error: No data for binding key while generating WSDL

    Hello users,
    I have converted a custom rfc to webservice using Wizard tool. While generating WSDL file using Open WSDL document for selected binding of SOAMANAGER, i'm getting the error message 'No Data for Binding Key'.
    Can anyone let me know the solution to resolve this issue? Also, I could note that the Object Status for this sevice reads Services: 0 / Endpoints: 0
    Strangely, I tried to generate WSDL for another Custom Webservice and it did get generated but with 403 error page. and for this the Object Status read Services: 1 / Endpoints: 1.
    Any information with respect to this is appreciated.
    Thanks in advance.
    Regards,
    Naresh

    Hi Naresh,
    You have posted the question in the wrong forum, it should have been posted in Webdynpro.
    Cheers,
    Bhavana

  • How to Save data from HR_INDVAL BADI

    hI
    I M USING THE ABOVE BADI FOR CALCULATION OF BONOUS FOR INFOTYPE 15  .... IT IS CALCULATING VERY WEL BUT DATA IS NOT GETTING SAVE IN PA0015 .
    KINDLY HELP ME
    REGARDS
    AMMAD

    hi
    i have created UDO i have also done registration  i want to bind item master completely to matrix and then in one column i will set check box to check unchecked and then i want to save it to database
    i have one user defined form and 4 matrix and 4 child tables
    for each matrix i have given 1 form and i have to transfer the data from temp form to main form matrix having large data in matrix on temp form to main form matrix
    to load data on matrix i have used for loop that i want to avoid so how i can bind large data to matrix without for loop
    regards
    amey

  • How to save data from form into database

    i nid to save data from form into the new table, @abc.
    got any idea ?
    smtg like oObj = BaseAddOn.Company.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oPurchaseDeliveryNotes) this but it is a new object or user data source.
    Thanks

    hi
    i have created UDO i have also done registration  i want to bind item master completely to matrix and then in one column i will set check box to check unchecked and then i want to save it to database
    i have one user defined form and 4 matrix and 4 child tables
    for each matrix i have given 1 form and i have to transfer the data from temp form to main form matrix having large data in matrix on temp form to main form matrix
    to load data on matrix i have used for loop that i want to avoid so how i can bind large data to matrix without for loop
    regards
    amey

Maybe you are looking for

  • OBIEE: Odbc driver returned an error

    Hello All, While creating an answers on Oracle BI Answers, we are encountering the following error: Odbc driver returned an error (SQLExecDirectW). Error Details Error Codes: OPR4ONWY:U9IM8TAC I2DL65P State: HY000. Code: 10058. [NQODBC] [SQL_STATE: H

  • SAX Parser is dropping characters

    Hello, We have noticed that the BEA implementation of the SAX parser appears to drop characters from the start of an attribute's value. For example: <attribute-value>au.com.bonline.bean.SomeClass</attribute-value> becomes online.bean.SomeClass after

  • Is there a user setting which may affect fillable forms?

    On our home PC running Widows 7 Ultimate and Adobe Reader 11, we have 2 users. One which has admin rights the second is just a user. Accessing a Benefit Form on the Sunlife Website which is fillable the regular user is able to complete it  yet the us

  • Reciever not detected -- Nano+Nike System Failure

    I'm on my 3rd Nike+ system. After approximately 20+ miles of running, my nano would no longer can detect the reciever. It would 'stop' the workout mid-way through and after that, the nano will not detect the reciever. I've replaced the sensor twice (

  • Socket options to support hand off across wireless networks

    Hello, I'm developing an application client which connects to a server and is meant to run on PCs. I want to make sure that my client application doesn't disconnect when the user moves from one network to another network (one cafe to another cafe). I