How to save data model design in pdf or any format..?
how to save data model design in pdf or any format..?
i ve created design but not able to save it any mage or pdf format
File -> Print Diagram -> To PDF File
Similar Messages
-
How to save current output page as pdf or xls format?
hello expert,
i have make 2D line graph . now i am trying to save current output page as pdf or xls format.
how can i do this?
please reply soon
thanks in advanceI have a similar problem with Firefox on android. When saving a page as PDF, often the PDF page size isn't big enough and just shows part of the full web page. Is there any way to set the PDF page size and make it bigger,say A4 or some other size?
-
How to upgrade Data Modeler design to new version when using subversion?
Hi,
I just installed Data Modeler 3.1 product version and I'm using subversion. When I open a design which I have modified with earlier 3.1EA3 version, I get the message " This design is in old format You should use "Save as... from file menu ...
Is there other more smart way to upgrade to new version than "save as" ? I remember having problems in earlier versions with this also. Am I supposed to save the design with different name or...? Or what is the best way?Hi ,
I have updated the model to 3.1 version with subversion and I have to say that is quite hard for me,
I have "save as" with other name in other folder and after I have dropped from SVN my current folder and copy the new files to new folder in SVN and add the files to SVN,
I hope that I should not do this workaround too many times in future,
maybe if we save the model below a folder with the version number of the tool will help us but I don't like this option,
I guess someone could help us with a simpler solution than mine,
Regards -
Hi,
I wanted to save data acquired from NI-DAQ (for example, NI 9234) in a file using the DAQ-mx ANSI C Code. The response I got was as follows:-
One way to do it is with TDMS logging. DAQmx comes with functions designed to log to a TDMS file. This is a special file type that is used for collecting data in a logical format. It can be displayed in a TDMS viewer where data is separated into groups and channels. NI-DAQmx provides examples for how to log to TDMS. Look at the TDMS examples in the C:\Users\Public\Documents\National Instruments\NI-DAQ\Examples\DAQmx ANSI C\Analog In\Measure Voltage directory.
However, now I want to know is there a way that using that same C code, can we save the data in a .txt file format (Text File) instead of a TDMS file? We actually want to access that file through MATLAB (that's why we want to save it in text format).
Also on an other note, is there a way we can access & open TDMS files by MATLAB?
Thanks,
Sauvik Das GuptaThere's a way you can access TDMS files in MATLAB:
http://zone.ni.com/devzone/cda/tut/p/id/7446 -
How to see data modeller reports in sql developer?
How to see data modeller reports in sql developer?
1) export your design to existing schema in Oracle database
2) define connection to that schema in SQL Developer
3) find "Data Modeler Reports" in reports window of SQL Developer - probably "design rules" are more interesting here
Philip -
Trouble saving Data Modeler design 4.0EA3
Hello,
I'm having trouble saving a Data Modeler design. I can create and import tables into a physical model; however, when i save the model (File > Data Modeler > Save) it doesn't appear to be saved correctly since the resulting .dmd file is 0 bytes. If i close the design and reopen it, none of the tables that i created appear.
I'm using version SQL Developer Version 4.0.0.13.30 on Windows 7.
Thanks,
Petei don't see any recent errors in the datamodeler.log file. the only entries for the last 2 days are:
2013-11-12 11:04:52,116 [AWT-EventQueue-0] INFO DataModelerAddin - Oracle SQL Developer Data Modeler 4.0.0.825
2013-11-12 11:15:12,672 [AWT-EventQueue-0] INFO DataModelerAddin - Oracle SQL Developer Data Modeler 4.0.0.825
2013-11-12 11:26:59,517 [AWT-EventQueue-0] INFO DataModelerAddin - Oracle SQL Developer Data Modeler 4.0.0.825
2013-11-12 16:54:18,313 [AWT-EventQueue-0] INFO DataModelerAddin - Oracle SQL Developer Data Modeler 4.0.0.825
2013-11-13 10:44:03,694 [AWT-EventQueue-0] INFO DataModelerAddin - Oracle SQL Developer Data Modeler 4.0.0.825
2013-11-13 10:49:26,093 [AWT-EventQueue-0] INFO DataModelerAddin - Oracle SQL Developer Data Modeler 4.0.0.825
2013-11-13 11:08:11,679 [AWT-EventQueue-0] INFO DataModelerAddin - Oracle SQL Developer Data Modeler 4.0.0.825
if run sqldeveloper\sqldeveloper\bin\sqldeveloper.exe, the only message in the console is:
LOAD TIME : 205
no other messages.
I have 3 different builds of sql developer 4.x - they all have this problem. My 3.2 build does not have this problem. So, next, i installed the Data Modeler standalone version (4.0.0.825) and created a physical model with just one table - and i was able to save it! The .dmd had the following content (not 0 byte):
<?xml version = '1.0' encoding = 'UTF-8'?>
<OSDM_Design class="oracle.dbtools.crest.model.design.Design" name="test_dm_only" id="986F3685-3223-BAF6-8D69-6C2C4C52718E" version="3.5">
<createdBy>HillsP01</createdBy>
<createdTime>2013-11-13 16:36:18 UTC</createdTime>
<ownerDesignName>test_dm_only</ownerDesignName>
<capitalNames>false</capitalNames>
<designId>986F3685-3223-BAF6-8D69-6C2C4C52718E</designId>
</OSDM_Design>
So, looks like the Data Modeler works, but there's a problem with my installation with the full SQL Developer product. One thing that i noticed is that my full SQL Developer install does not have a full list of logical types. I had to manual create a the ones that i use. In the Data Modeler only install, all of the logical types were available out of the box. -
How to save data in ztable after editing in alv report
how to save data in ztable after editing in alv report?
Hi,
Please find the attachment below.This may be usefull to you.
[http://wiki.sdn.sap.com/wiki/display/Snippets/ALV-Editingandsavingtheeditedvaluesin+Database%28OOPS%29]
Regards,
Ramakrishna Yella. -
How to print Data Model in Report??
Do anyone know how to print Data Model??
Thanks your help.
- FrankHi Venkat,
Thanks alot.... i am checking the appendix k.
I want to know that if i want to customize the report as per the client requirement,
can you please let me know which template i will use if i required remittence advice as well as check print data on the layout.
The following is the list of field i required:
Vendor ID
Check Date
Check number
invoice date
invoice/ CR memo number
invoice description
invoice gross amount
invoice discount amount
invoice net amount
total gross amount
total discount amount
total net amount
logo
company name and info
bank name and info
check number
check amount spelled out
check date
check amount numeric
payee name
CEO signature
MICR check number
MICR routing number
MICR bank account number
mailing return address
mailing address
Venkat it would be great help if you please let me know the exact process to be follow for check printing report.
I worked on bi publisher report in 11i, but in 12i the process is bit different.
also if you have any template ready can you please send me on my mail id ... i forwarded you the test mail from my official id or on [email protected]
Looking forward to your kind response.
Regards
Ratnesh -
Could u plz help me to find simple example for how to save data file in a spread sheet or any other way in the real time controller for Sbrio 9642 using memory or usb flash memory
Here are a few Links to a helpful Knowledge Base article and a White Paper that should help you out: http://digital.ni.com/public.nsf/allkb/BBCAD1AB08F1B6BB8625741F0082C2AF and http://www.ni.com/white-paper/10435/en/ . The methods for File IO in Real Time are the same for all of the Real Time Targets. The White Paper has best practices for the File IO and goes over how to do it.
Alex D
Applications Engineer
National Instruments -
How to Transper data Model Node to Vallue Node
Hi Friends
I am getting problem in Create the Check box in Table
I am getting model node from ECC System(Zmmoa_Pending_Getlist_Input)
This is path for attributes avaliable
Zmmoa_Pending_Getlist_Input-Output-outtab
Under outtab all attributes available
My Requrement is display Check box. So I am doing like this I will care one more Vallue Node (OutTab_1) under this Vallue Node I put I have node attributes.here I careate one Check boxdatatype --Boolean(i.e Under outtab attributes)
Now I will get data from ModelNode and send that data to Vallue Node(by this node that data display in table formate.Eache Row Having Check box)
So I have to this Code But Data is Not getting in Vallunode table
in FirstView
in Submit Button
public void onActionGetData(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
//@@begin onActionGetData(ServerEvent)
//$$begin ActionButton(1164287125)
//wdThis.wdGetExamp2CompController().checkSRA();
wdThis.wdGetExamp2CompController().checkBox();
wdThis.wdFirePlugToSV();
//$$end
//@@end
This is code writen in CC
public void checkBox( )
//@@begin checkBox()
//Date today = new Date(System.currentTimeMillis());
IWDMessageManager mes = wdComponentAPI.getMessageManager();
try
Zmmoa_Pending_Getlist_Input input1 = new Zmmoa_Pending_Getlist_Input();
wdContext.nodeZmmoa_Pending_Getlist_Input().bind(input1);
wdContext.currentZmmoa_Pending_Getlist_InputElement().modelObject().execute();
wdContext.nodeOuttab().invalidate();
// IPrivateExamp2Comp.IOutTab_1Element elem = wdContext.nodeOutTab_1().getOutTab_1ElementAt(i);
//mes.reportSuccess("Input:" +wdContext.nodeOuttab().size());
for (int i =0; i < wdContext.nodeOuttab().size(); i++)
//mes.reportSuccess("Input Of I:" +wdContext.nodeOutput().size());
//mes.reportSuccess("Input:" );
IPrivateExamp2Comp.IOuttabElement elem = wdContext.nodeOuttab().getOuttabElementAt(i);
//wdComponentAPI.getMessageManager().reportSuccess("elem:: "+elem);
IPrivateExamp2Comp.IOutTab_1Element result = wdContext.nodeOutTab_1().createOutTab_1Element();
//Zbapiresult result = new Zbapiresult();
result.setCheckBox(false);
result.setConf_Shp_Date(elem.getConf_Shp_Date());
wdComponentAPI.getMessageManager().reportSuccess("Conf_Shp_Date:: "+elem.getConf_Shp_Date());
result.setExpt_Shp_Date(elem.getExpt_Shp_Date());
result.setMaterial(elem.getMaterial());
result.setMatl_Desc(elem.getMatl_Desc());
result.setOa_Quantity(elem.getOa_Quantity());
result.setOpn_Quantity(elem.getOpn_Quantity());
result.setPo_Item(elem.getPo_Item());
result.setPo_Number(elem.getPo_Number());
result.setPo_Status(elem.getPo_Status());
result.setPur_Group(elem.getPur_Group());
result.setStat_Date(elem.getStat_Date());
result.setQuantity(elem.getQuantity());
wdContext.nodeOutTab_1().addElement(result);
catch(Exception e)
mes.reportException(e.getMessage(), false);
//@@end
can u help me
how to Transper data Model Node to Vallue Node. By using vallue node that data will display in table format with Check box.
I need data display in table format with Check box
Regards
Vijay KalluriHi Vijay,
TO copy values from Model Node to Value Node use the copyElements() method of the WDCopyService API. To acheive this, the name and type of the attibutes in the Value Node should be same as Model node attributes.
Example: -
Model Node <----
> Value node
---Name-String ---Name - String
---Number-Integer ---Number - Integer.
then use the following statement:
WDCopyService.copyElements(wdContext.node<ModelNode>(),wdContext.node<ValueNode>());
This will copy all the values.
Regards,
Poojith MV -
Performance impacts of attributes versus entities in data model design
I'm trying to understand the performance implications of two possible data model designs.
Here's my entity structure:
global > the person > the account > the option
Typically at runtime I instantiate one person, one account, and five option 's.
There are various amounts determined by the person's age that need to be assigned to the correct option.
Here are my two designs:
Design one
attributes on the person entity:
the person's age
the person's option 1 amount
the person's option 2 amount
the person's option 3 amount
the person's option 4 amount
the person's option 5 amount
attributes on the option endity:
the option's amount
supporting rule table:
the option's amount =
the person's option 1 amount if the option is number 1
the person's option 2 amount if the option is number 2
the person's option 3 amount if the option is number 3
the person's option 4 amount if the option is number 4
the person's option 5 amount if the option is number 5
Design two
attributes on the person entity:
the person's age
attributes on the option entity:
the option's amount
the option's option 1 amount
the option's option 2 amount
the option's option 3 amount
the option's option 4 amount
the option's option 5 amount
supporting rule table:
the option's amount =
the option's option 1 amount if the option is number 1
the option's option 2 amount if the option is number 2
the option's option 3 amount if the option is number 3
the option's option 4 amount if the option is number 4
the option's option 5 amount if the option is number 5
Given the two designs, I can see what looks like an advantage for Design one in that at runtime you have less attributes (6 on the one pension member + 1 on each of 5 options =11) than Design two (1 on the one pension member + 6 on each of 5 options = 31), but I'm not sure. An advantage for Design two might be that the algorithm has to do less traversing of the entity structure: the supporting rule table finds everything for the option's amount on the option.
Either way there is a rule table to determine the amounts:
Design one
the person's option 1 amount =
2 if the person's age = 10
5 if the person's age = 11
7 if the person's age = 12, etc.
Design two
the option's option 1 amount =
2 if the person's age = 10
5 if the person's age = 11
7 if the person's age = 12, etc.
Here it looks like the rulebase would have to do more traversing of the entity structure for Design two.
Which design is going to have better performance with a large amount of rules, or would it make a difference at all?Hi!
In our experience you only need to think about things like this if you were dealing with 100s or 1000s of instances (typically via ODS). As you have a very low number, the differences will be negligible, and you should (usually) go with the solution which is the most similar to the source material or the business user's understanding. I also assume this is an OWD project? Which can be even better, since the inferencing is done incrementally when new data is added to the rulebase, rather than in one "big bang" like ODS.
It looks like design 1 is the simplest to understand and explain. I'm just wondering why you need the option entity at all, since it seems like a to-one relationship? So the person can only have one option 1 amount, one option 2 amount etc, and there are only ever going to be (up to) 5 options...is that assumption correct? If so, you could just keep these as attributes on the person level without the need for instances. If there are other requirements for an option instance then of course, use them, but given the information here, the option entity doesnt seem to be needed. That would be the fastest of all :-)
Either way, as the number of instances is so low, you should have nothing to worry about in terms of performance.
Hope this helps! Write back if you have any more info / questions.
Cheers,
Ben -
How to 'save a copy' of a pdf?
I am trying to change the security of the pdf in which 'extend features in adobe reader' option is enabled. To change this i have to save a copy of a pdf.
How to save a copy of a pdf using acrobat sdk or javascript or batch processing?
I have tried saveAs method in javascript but it doesnt work.
Please Advice.Im trying to save the document in a location, but it is giving me a "Error 3: Bad parameter".
Here is my code.
DURING
ASFileSysReleasePath(fileSys,pathName);
ASPathName newPathName = ASFileSysCreatePathName(fileSys, ASAtomFromString("D:\\newPdf.pdf"),NULL,NULL);
PDDocSave(pdDocForExp, PDSaveFull | PDSaveCopy, newPathName,fileSys, NULL, NULL);
PDDocClose(pdDocForExp);
HANDLER
char buf[256], errmsg[256];
sprintf(buf, "Error %d: %s", ErrGetCode(ERRORCODE),
ASGetErrorString( ERRORCODE, errmsg, sizeof (errmsg) ) );
AVAlertNote(buf);
END_HANDLER -
SAP BW SRM Workflow data model design
Hi All,
I have a requirement from my client to design SAP BW SRM Work flow report, in output user is interested for document flow/chain starting from Shopping cart (SC) - Bid invitation (RFx) - Bid (RFx responses) - Purchase order (PO) - Confirmation. There are standard datasources and DSO's for the same but I want to check experts ideas on data model design. I am thinking to build infosets on top of DSO's but it will impact Query performance as data volume for sure will be more and will increase down the line. In addition I need to consider below exceptions or restrictions as well:
1. Document may/may not start with SC for example one possibility is document start at SC and end at Confirmation or start at RFx and end at PO etc.
2. User is expected to see below various possibilities of document chain in report output:
SC - RFx - RFx responses - PO - Confirmation or
SC - RFx - RFx responses or
SC - PO - Confirmation or
SC - RFx - RFx responses - PO
SC - RFx or
RFx - RFx responses or
RFx or
RFx - RFx responses - PO or
RFx - RFx responses - PO - Confir or
PO - Confiramtion or
PO
your help and ideas on this is greatly appreciated
Thanks and Regards,
ReddyHi All,
Any inputs or ideas on the data model design? Thanks for your help in advance
Regards,
Reddy -
How to know if the data model qry is not returning any data
Hi
If my report doesn't have data (meaning if the data model qry doesn't retreive any data), I wan't to show this text: "There is no data returned."
My question is how would I know that the qry is not returning any data. I know I can create a text field, and write a trigger on it, to set it True or False depending on the fact that data is being returned or not.
Thanks
ShaluHi,
In Data Model create a summary column for function=count on one of your columns.
Then for BeforeReport trigger you can write
function BeforeReport return boolean is
begin
if :CS_RPT_NODATA > 0 then
return (TRUE);
end if;
SRW.MESSAGE(300,'There is no data');
return (FALSE);
end;
Regards, Gicu -
HP Officejet Pro 8600 won't save scanned document in searchable PDF or .rtf format
HP Officejet Pro 8600 won't save scanned document in searchable PDF or .rtf format
The scanner scans the document without a problem but when I select 'SAVE' and
specify a location and file name, a system error 'The HP scan application was
unable to save the file to the specified location'. It will save a regular PDF file
or a JPG file with no problem, but trying to save an searchable PDF or .rtf file
results in the above mentioned system error.
This problem occurs either from HP SCAN or from the 8600 scan panel.
The computer is running Windows XP and the I.R.I.S. OCR software is
loaded.Hello TrailsEnd,
Welcome to the HP Forums!
I understand you're receiving an error message "The HP scan application was unable to save the file to the specified location". I will do my best to assist you!
First, I would recommend downloading this tool called the Print and Scan Doctor. This tool diagnoses and helps resolve common printing, scanning, and connectivity problems, including: (This information is stated here.)
USB: Verifies that the USB connection from your computer to the HP product is working correctly.
Network: Verifies that the network connection between your computer and your network is working correctly.
Device Status Test : Checks for device errors such as out of paper, paper jams, carriage stalls, and paper feed issues, and then provides instructions for fixing the error.
Driver Check : Checks for missing or corrupt driver files.
Device Manager : Checks for problems in Device Manager that would prevent printing.
Device Online : Checks if the product has been paused or set to offline, and then sets the status back to online if necessary.
Print Queue : Checks for and clears pending print jobs in the print queue (a log of print jobs waiting to print).
Port Match : Checks the port settings for the HP product.
Device Conflicts : Checks for conflicts with other drivers, such as other printer brands.
Ink Issues : Checks the cartridges and ink levels for issues that affect print quality.
Print Settings : Checks and adjusts the print quality settings.
Test Print : Prints a test page for print quality evaluation, and provides options for cleaning and aligning the printhead if necessary.
Scan Tests : Checks the scan mechanism, drivers, and registry entries.
Let me know if this tool fixes a scanning problem on this post. If this doesn't resolve your issue, then I am going to recommend uninstalling the software. Please follow this HP document on Uninstalling the Printer Software.
Once this is complete, you can perform a clean boot on your computer. I will provide a Microsoft document here to help you. This helps eliminate software conflicts that occur when you install a program or an update or when you run a program. Now, you can install the full feature software from the HP website here.
Please post your results, as I will be looking forward to hearing from you. Have a great day!
I worked on behalf of HP.
Maybe you are looking for
-
Data missing while downloading the data using GUI_DOWNLOAD
Hi experts, I'm uploading the Production Order data through excel and in the transaction level it's happening fine. After running the BDC I'm fetching the Production Order Number(AUFNR) and it's Status from the respective tables and downloading the d
-
Reinstalled windows 7-64bit and now itunes wont open(although process runs)
i have googl'd this issue and looked over all possibilities, however none have really shown progress except using msconfig. disabling all but windows functions did allow me to open itunes, but i have not been able to do anything with it. as i have st
-
Failure: "linker.cp​p", line 3386
When I open the VI, a pop up error linker.cpp @ line 3386 and d the Labview will crash and go out. I created a password for the VI. Windows 98 LV 6.0.2
-
JAAS: How to create Group of Resources to define permissions hierarchically
Hi, Is there a way to create a group of resources in JAAS ? What I mean is to create a group of pages, a group of bank Accounts ( say loan accounts ), a group of business rules, etc. I have observed that Group extends Principal, and a subject can hav
-
Is reseed required when in "failed and Suspended" status
We had a small hiccup in our SAN which we have resolved. The database copies went into a "Failed and suspended" state on one server. Can we just right click on them and say "resume?" It seems all the documentation on MS web site talk about reseedi