How to save drawings in a Screen clipping

Good Afternoon Folks:
I have a problem in saving drawings from a Screen clipping note. After capturing a screen, I will add a circle/highlight on a part of the screen in order to draw the reader's attention. Onenote however, saves only the screen clipping and ignores the
drawings and or any writings (annotations) I have added.
The only option I can think of now is to take another screenshot and use, does not seem efficient.
Can one of you experts help me out please?
Thanks
Srini

Hi
Were other contents in your Onenote saved well?
I have tested in my machine in both Onenote 2010 and 2013, and they worked well.
We recommend you start Onenote in safe mode to check the issue(Hold Ctrl key and click into the program):
http://office.microsoft.com/en-nz/onenote-help/work-with-office-safe-modes-HP010354300.aspx
Would you mind do a repair for your Office suites in Control panel>Program and features>Office>Change>Repair
Regards
Tylor Wang
TechNet Community Support

Similar Messages

I imported an hour of video into iMovie HD and cut it down to a 33 sec clip, and emptied the trash. When I save the project, the file size is 20Gb. How can I save just the 33 sec clip?

I imported an hour of video into iMovie HD and cut it down to a 33 sec clip, and emptied the trash. When I save the project, the file size is 20Gb. How can I save just the 33 sec clip?

Non-destructive editing is an important feature of iMovie HD 6.
iMovie preserves the entire copy of every clip you place into your movie in case you change your mind at a later stage.
So, if you have cut out one minute from a 45 minute clip, iMovie will have stored two complete copies of that clip. This is why is helps to set import as 3-5 minute clips rather than one huge chunk. As DV runs at 13GB per hour your project files can get very big.
One workaround is to complete the editing of a section of the movie, then export that to Quicktime: highlight the clip/s, choose Share-Quicktime, turn on Share selected clips only, and choose Full Quality from the pop-ip menu.
Once you have saved the stand-alone clip to your hard drive, you can re-import it into your project using the File/Import command, and delete the original long clip/s from the project.

How to save a photo to my computer screen as wallpaper

How to save a photo in my iphoto library as wallpaper on my computer screen?

In addition to FoxFifth's recommendation, you can also copy the link location, or copy the image, and subsequently paste into another application. In some instances (e.g. openclipart.com), one can drag/drop images into local application documents. Exceptions are images that were created with Adobe Flash, HTML/CSS, or blocked from access by the site owner.
Just because you can copy an image from another location, does not automatically grant you the ownership, or use rights to that image on creative works of your own (e.g. blog).

How to disable save button on selection screen (1000) run from other report

Hi Experts,
Can any one let me know how to disable save button on selection screen (1000) run from other report.
Say I am running from report R1 which submits report R2, but the save button should be disabled on
report R2(selection screen 100).
Thanks in advance.
Regards
RP.

Hi RPReddy16 ,
Try this:
DATA :BEGIN OF t_extab occurs 0,
fcode like rsmpe-func,
END OF t_extab.
REFRESH T_EXTAB.
MOVE 'SAVE' TO T_EXTAB-FCODE.
APPEND T_EXTAB.
CLEAR T_EXTAB.
SET PF-STATUS 'STATUS' EXCLUDING T_EXTAB.
Regards,
José

How to save three table control in subscreen from main screen

hi All,
I have three table control in subscreen and i want to save the content of all the table control from the save button of Main screen how can i do it.
Thanks
Narendra Vikram Vishwakarma

hi
in main screen PAI
when 'SAVE'
write the code here to save it.
thanks

How to save an edited viceo clip in premier elements 11 to my organizer (windows 07)?

How to save an edited video clip in premier elements to my organizer so that I can add teh edited video clip to my slide show on windows 7 operating system?

sanford5
This is not Adobe. We are Premiere Elements users trying to help other Premiere Elements users with their Premiere Elements workflows. Under those conditions, only Adobe may have the opportunity to access your computer in troubleshooting session between you and them. You can use the following link to contact Adobe via its Adobe Chat.
http://helpx.adobe.com/contact.html?product=premiere-elements&topic=using-my-product-or-se rvice
When the link opens, click on the statement "I still need help" to bring up Adobe Chat.
I have no idea if they will charge you a fee for the service ($40 US dollar/hour). It might not even help you (fee or no fee) because you do not have the latest version of Premiere Elements.
What you ask is easy enough. Let me try again with a step by step to see if we can get this working for you in principle and then fine tune the details.
1. Export your Timeline to a file, using Publish+Share/Computer and then one of the choices
Adobe Flash Video, MPEG, AVCHD, AVI, Windows Media, QuickTime, Image, Audio. I do not know what your project settings are, but I am going to guess at NTSC/AVCHD/Full HD1080i30. That would represent 1920 x 1080 @ 29.97 interlaced frames per second.
The following is going to be a mini test run in principle so we will cut to the core and overlook some things.
Go to Publish + Share/Computer/AVCHD/ and set Presets = MP4 - H.264 1920 x 1080p30.
Note that there is a field for Save In: near where you set Presets. Set the Save In for Libraries/Documents not C:\Program Files\Adobe\Adobe Premiere Elements 11. Keep out of the Program Files for matters such as these.
Go to the Elements Organizer 12 File Menu/Get Photos and Videos/From Files and Folders and then browse to and select your MP4 file that you have saved in Libraries/Documents.
You now should have your video represented in the Elements Organizer 12 with a thumbnail.
Please let us know if that works for you. If not, then please let us know where you need supplemental help to get the task completed. I will re-write if necessary.
We will be watching for your results.
Thank you.
ATR
Add On...A little side note for later...If you took your file saved to the computer hard drive and imported that back into Premiere Elements with Premiere Elements' Add Media/Files and Folders, you would get
a. the file imported into a new project
but also
b. a copy of the file automatically placed in the Elements Organizer 12.
If the ideas seem overwhelming, please take the steps on one at a time and follow exactly what is written. You should do fine.

How To Save Screen Shot Photo From iPAD to JPEG FORMAT

How To Save Screen Shot Photo From iPAD to JPEG FORMAT

The "iPad format" is PNG (which is better quality than JPEG).
There is no way to choose JPEG at the moment of taking the screen shot. You will need to convert the file using conversion software, probably on your computer. Google "convert PNG to JPEG".

I am trying to figure out how to save/share only a clip out of an entire project.

I am trying to figure out how to save/share only a clip out of an entire project. I do not want to delete the rest of the timeline as I want to cut/copy out several smaller clips and save/share them as their own files. I am working on a copy of my original video, and I know I can just bring the project timeline down repeatedly to isolate this clip by deleting all else, but feel there must surely be a simple way to do this.

Sirole11
What version of Premiere Elements are you using and on what computer operating system is it running?
For now I will generalize the principles involved. If more details needed then, please supply the details of your situation and Timeline track placement.
You would place the gray tabs of the WorkArea Bar to span just the area to be exported.
The tabs are set...
Move the Timeline Indicator to the start of the segment, hold down the Alt key of the computer main keyboard as you hit the left bracket key [
then
Move the Timeline Indicator to the end of the segment, hold down the Alt key of the computer main keyboard as you hit the right bracket key ]
The critical step is to make sure that you have a check mark next to the "Share Work Area Bar Only" option in the export dialog (if the dialog has that option).
Please review and remember that the answers are in the details.
Thanks.
ATR

How to add favorite folders to "Save As.." dialog screen

Hi all,
To the Windows Explorer shell it is possible to add favorite folders to the "Save as..." dialog screen (done so by dragging shortcuts to an open "Save as..." screen). [ see screendump for what I am referring to ]
Now one would suppose the same is possible for the "Save As..." screen from within Adobe Acrobat Pro.
Unfortunately, it is not: no possibility to add favorite locations there....
This isn't productive at all, since my docs are on a separate disc in non-standard folders. Each time I wish to save PDF-scanned documents to the harddisk, I need to click my way through too much folders...
Anyone know a way (registry edit perhaps?) that enables me to add favorites to the Adobe "Save As..." screen?
(I really need it there, instead of e.g. creating shortcuts on my Desktop...)
Thanks for your help!
Willy

Ok, here are three solutions I tested, all seem to work in my copy of vista.
The easiest: grab the 'places bar editor' from here: http://melloware.com/download/
Moderate: use TweakUI, the windows XP utility. You need to jump through some hoops to get it to run in Vista, but it seems to work fine. Follow the instructions by n8barber a few posts down: http://forums.techarena.in/vista-help/700353.htm
Hardest: edit the registry. I added the string using a single \ in the path, but somehow when i exported it I show a double \. I guess you will have to fiddle with this.
[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\comdlg32\PlacesBar]
"Place4"="h:\\Project Files"

How do I save drawings in adobe ideas to itunes? Using a ipad

i dont know how to do this. Im also using brushes I know its not adobe but i dont know how to save using adobe ideas and in the brushes app.

Yes. As I mentioned, I have tried a few things already. Is there any way to get specific click by click instructions. The difficulty is understanding what boxes to click on or off. I've been in that menu, and tried a number of things but the rights in reader do not allow the user to add and save text. DO you have a specific set of instructions to help solve this issue?

How to use iphoto album on screen saver

Upgraded to Mountian Lion, now my IMAC won't let me use my iphoto albums as desktop screen saver???

* Screen flow logic........
PROCESS BEFORE OUTPUT.
*MODULE PBO_MODULE.
PROCESS AFTER INPUT.
*MODULE PAI_MODULE.
PROCESS ON VALUE-REQUEST. "F4
FIELD EKPO-EBELP MODULE help_ekpo.
* populate screen field from within PROCESS ON VALUE-REQUEST(F4) call
*&      Module help_responsibility INPUT
*       text
MODULE help_ekpo INPUT.
**Transport values to table dynpro/screen table control
DATA: l_stepl LIKE sy-stepl,
        l_indx LIKE sy-stepl.
DATA: dynpfields        LIKE dynpread OCCURS 5 WITH HEADER LINE.
* Adjust for scroling within table control
CALL FUNCTION 'DYNP_GET_STEPL'
    IMPORTING
      povstepl        = l_stepl
    EXCEPTIONS
      stepl_not_found = 0
      OTHERS          = 0.
l_indx = tc_ekpotable-top_line + l_stepl - 1.
          "tc_ekpotable should already have been declared
REFRESH dynpfields.
CLEAR   dynpfields.
dynpfields-fieldname = 'EKPO-EBELN'.
dynpfields-fieldvalue = '00010'   "wa_ekpo-ebeln.
dynpfields-stepl      = l_stepl.
APPEND dynpfields.
dynpfields-fieldname = 'EKPO-EBELP'.
dynpfields-fieldvalue = '00020'   "wa_ekpo-ebelp.
dynpfields-stepl      = l_stepl.
APPEND dynpfields.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
    EXPORTING
      dyname     = 'SAPLZZ_EKKO'    "Program name
      dynumb     = '0100'           "Screen number
    TABLES
      dynpfields = dynpfields
    EXCEPTIONS
      OTHERS     = 0.
ENDMODULE.                 " help_ekpo INPUT

How do I combine to clips, into one split screen clip

yeah ^ please help me

How do I combine to clips, into one split screen clip
Since iMovie '08 automatically centers files and currently has no control settings that allow the user to offset or displace the clips, this effect cannot be done from within this versions of iMovie. You can, of course do this externally using QT Pro, Final Cut, or Studio.

How do I reposition an inserted green screen clip into a corner of the host clip

Help needed on moving or repositioning an inserted green screen clip to a corner of a host clip for presentation purposes, any ideas ??? Thanks

You can drag and drop a photo at any point (at any frame... 30 frames per second.) Make sure you go to iMovie Preferences and enable Advanced Tools. You can drop a photo, and a pop up menu will come up. Choose Cutaway from the menu.
Further you can use drag and drop to select a range of frames, and then split the clip.
For example, lets say I have a clip of 60 frames (or 2 seconds).
I can drag so that the yellow border covers the first 30 frames. Then right-click/Split Clip. (Or EDIT/Split Clip.
I then have two virtual clips in the project. (Note: the underlying clip in the Event has not changed).
I recommend you watch the [Video Tutorials|http://www.apple.com/findouthow/movies>
Or see [Ken Stone's Tutorial|http://www.kenstone.net/fcphomepage/imovie_09stone.html]
Or take a look at the HELP files.

I can't figure out how to save my events onto an external hardrive

I have been looking at the event libraries and everywhere to figure out how to save my files onto an external hardrive. I currently use FCPX to edit Call of Duty Montages for people as my job so I need this to work. I don't know what I'm doing wrong and I really need storage.

In the Copy Files Into: field there is a pop up that allows you select where your media is copied to.
Looking at the above screen shot if I want files to be copied to my External LaCie drive I just tick that one.
Firstly you will have to create at least one Library on the External to send it there.
There is the CHOOSE option that allows you to navigate anywhere on the the system to manually select a destination.
Al

Please can someone tell me how to save a MP3 file from my email on my iPad so I can put in on Facebook? Thankyou

Please can someone tell me how to save a MP3 file from my email on my iPad so I can put it on Faceboo? I use hotmail and please tell me step by step as I am not a tech guru lol. Thankyou

Hi jscher200,
Thank you for your reply, sorry for the VERY late late response, but I have just figured out how to control this separate 'panel'. I find it really useful for monitoring Google Analytics in as it can just sit there running. It does have its limitations, as it's a limited size (you can't expand it to full screen view), so you can only ever see a vertical section of a website and need to scroll to look to the right or left, but I have the live view of people accessing my website running on there and if the numbers start racking up at any time, I can scroll to look and see what pages they are accessing, where they've been referred from, etc.
To get it to work, you save a website address in the Bookmarks Toolbar and when you can see it sitting on the toolbar at the top of the screen with its little icon, right click on it then click 'properties', then tick the box 'Load this bookmark in the sidebar'. The next time you click on this bookmark to open the website, it will load in this sidebar, which looks like a separate 'window' but is immovable. You can only have one sidebar application running at a time, but can change it by right clicking on the bookmark you want to load in there and it will then change to that one next time you click on that bookmark.
I hope this might be useful to others, as I asked for help with this on loads of forums and not one person knew that this existed - even really skilled techies!

How to save drawings in a Screen clipping

Similar Messages

Maybe you are looking for