How to save in different worksheets in a single workbook

Hi Experts,
I ran one query and I saved it as a new workbook. In the same query I drilled down with another characteristic and I need the output should be saved in the same workbook in sheet 2.
Kindly do let me know how to save the different ouputs in a single workbook as sheet 1, sheet 2,..etc.,
Thanks,

Hi Kishor,
If you have just copy pasted this reult in sheet2 then it will be static.
If you want to refresh data in all the sheets then you have to create diff. queries as said by Venkat and insert this query in sheet2.
When you want to refresh data for any particular query then put cursor on any cell of the Query result an refresh it.
If you want to refresh data for all the queries in the workbook then select cell(put cursor) on any empty cell and refresh the workbook.
Regards
SS

Similar Messages

How to configure 3 different members under a single Month column

Hi SAP Gurus,
My client requirement is to show the report in following format, where under a Month column 3 different columns having
1) Quantity (Number of unit ) of a product,
2) its rate (Amount per unit), and
3) Total (amount)    will appear in a single report.
   I have Month as a Time Dim, while Qty, Rate and Total are members of account dim.
Que: How to configure such scenario in a single report?
Jan.2011
Product Category:            Qty (Input)   Rate (Input)   Total (Output)
Product 1
Product 2
Product 3
Product 4
Group1
     Where: Total = Qty X Rate
Thanks and Regards,
SouarbhD

Hi,
Use an EVDRE to create your input schedule. You need to have one row with products and 2 columns with time and account. Choose the memberset options as per the requirement. For the accounts, is total calculated with a dimension formula? If yes, then you just need to enter the values for quantity and rate and send the data. The total will be calculated by the system and will be displayed automatically.
Hope this helps.

How to use two different fonts in a single label?

Hello all,
Is there any way to use font of 2 different size and color for a single label?
Looking for a quick replies from you.
Regards,
Obaid

No. One label, one font, size and color.

How to Display two different objects in a single table header in Cross Tab?

i All,
I've a reqiurement for a Cross Tab Report like I need two different objects that should be displayed side-by-side, one object's values after another in a single header. In the picture below I've shown the objects separately in two rows, top header having BSNLNL,MTNLNL,RCOMNL and Header-2 having AIRTIL,RCOMIL. But requirements needs to be showing like this,
BSNLNL
MTNLNL
RCOMNL
AIRTIL
RCOMIL
Actually, the data for the header comes from a single object called Operator. I've show the Operators name ending with NL and after that names ending with IL. So, i've separated the data into two variables using the below formulae.
IL:
=[Billing Operator]
Where
Match([Billing Operator];"*IL")=1
NL:
=[Billing Operator]
Where
Match([Billing Operator];"*NL")=1
Also, the NL data should start first and after the NL data's last value ends, the IL data should begin.
One more thing is that I've to show '0' for null values. So i've used the below formulae on the column data. You can see below that except the "Outgoing ILD Mins in the month from Mobile Network" everything else showing fine. I don't understand why.
=If
Substr([Franchise];3;1)="M"
Then
   [Mobile Outgoing Charged Usage Minutes]
   Else
   0
I tried different approaches but couldn't find a solution. Could you please help me?
I'm using BO WebI 4.1 SP1
Regards,
Naren Vema.

Hi Naren,
No need to split Billing Operator object. Create a variable-
V_IL_NL= If Match([Billing Operator];"*IL")=1 Then "IL" ElseIf Match([Billing Operator];"*NL")=1 Then "NL"
1) Put V_IL_NL variable below Billing Operator object header.
2) Sort and create break on this variable.
3) Delete Footer column. it will automatically create when you apply break.
4) Hide V_IL_NL variable from this header.
~Anuj

How can I copy SQL results to different csv worksheets in the same workbook

Hi all,
I'm running a series of select statements using SQLPlus and I want the results for each statement to be copied to different worksheets within the same workbook.
For example, this is what I want: 'select statement 1' is run and spooled to file.csv / worksheet1. When 'select statement 2' is run it is spooled to file.csv / worksheet2. Same csv file but a different worksheet.
Right now my SQL is creating a seperate csv file for each select statement. Here's an example of my SQL:
spool c:\TEMP22\App_Eng1.csv replace
Select A.OBJECTOWNERID||','||B.OBJECTVALUE1
from PSPROJECTITEM B, PSAEAPPLDEFN A
Where B.PROJECTNAME = 'PRJETSC342'
and B.SOURCESTATUS = 2
and B.TARGETSTATUS = 1
and B.OBJECTVALUE2 = ' '
and B.OBJECTTYPE=33
and A.AE_APPLID = B.OBJECTVALUE1;
spool off
Is what I want to accomplish possible? Any ideas? Thanks.

As far as I know you can't have "worksheets" for .csv files. They are simply comma separated values (a flat file). I would suggest that you generate separate csv files for each of your queries and then create a new xls file and import each csv file as a new worksheet.
If you want to automate this process, I recommend you read this:
http://blogs.msdn.com/brian_jones/archive/2005/06/27/433152.aspx

Load different xml structure in single flash file

Hi to all,
How can i call different xml structures in single file..
actually i am looking for 2 different menu galleries in single
file.. first menu contains.. some 4 to 5 buttons.. done with this..
in other flash file..having some of 4-5 buttons.. and these
buttons.. to show in main flash file.. can i load 2 different swf
files in single main file and with different xml structure please
help me on this.. thanks in advance.
Best Regards
Satish Kumar Rajula

yes, you can use one xml instance with an if-statement, but
it's easier and cleaner to use different xml instances and
different parsing code for each xml file loaded that has different
structure.

How can you save data to a spreadsheet and use different worksheets in the spreadsheet?

I am trying to save data to a spreadsheet.
Each set of test data needs to be saved under a different worksheet. Is this possible and how can I do it?

As the example that Dennis pointed out, this can be done using activeX. In addition to that example I have another that demonstrates how to create a new workbook with multiple worksheets and save data to each of them. I hope that between the two you can get an idea of what to do.
Brian
Attachments:
xlexample.vi ‏66 KB

How to save each section report into different excel sheet?

Hi all
How to save each section report into different excel sheet?
I have a report in which there are 4 sections north south west east now i need to save north in excel sheet 1 , south in sheet2, west in sheet3, and east in sheet4. under each section there is list report.
Please let me know is it possible are not if possible let me no the procedure to be followed.
Thank you

If you're running XI 3.1 you might be able to solve this as follows.
1. Create four users: east, west, north, south
2. Create a profile that filters on the variable you used for the section/break
3. Publish the report
3.1 Set users created above to be the enterprise recipients
3.2 Add personalization (the profile created above)
3.3 Check the Deliver objects to each user in Destinations
(3.4 You could use %SI_OWNER% to get a nice suffix to the report name)
This should cause four reports to be created, each with its own "personalized" contents.

How to save settings in the front panel to different files and retrieve it later?

How to save the front-panel controllers' settings to different files and retrieve it later?
What I've archived is the "Save Settings" function, but when trying to "Reload Settings", I can only retrieve the saved data to front-panel indicators, but not the controllers!
Can anybody give me some advises?
Thanks in advanced!
Charles Lu

Hi
Just write the retrieved data to a local variable (but make it writable first) or property node of the controls.
Hope this helps.
Thomas
Using LV8.0
Don't be afraid to rate a good answer...

How series can be summarized in different ways within a single worksheet.

Hi,
Can you please advise me how can we achieve the below stuff.
“A given series can be summarized in different ways within a single worksheet table.”
This is mentioned in user guide page 14-8(Begining).

can you give me some material or document on that so that i can read actuaaly i need to make doc on it..

Question on saving to different worksheets on excel.

How can I save data as I loop through a program, and save the data generated in different worksheets on one excel file, without using activex?

You have two other choices that do not use ActiveX.
1. If you write continuous data that exceeds the maximum number of rows in Excel, you can still read the data using an Excel macro. Using the ReadLine method, you can parse the data into cells and skip to the next worksheet when the row limit is reached or using any token that you want (ie. blank line).
2. If you have Excel 2000 or later, writing your data as an XML file will allow you to format the data into worksheets. This will increase the file size dramatically. To do this you have to write the required header and then maintain the proper heirarchy of Workbook, Worksheet, Table, Row, Cell and Data. Save a simple data file as XML to see the file format.
Michael Munroe, ABCDEF
Certified LabVIEW Developer, MCP
Find and fix bad VI Properties with Property Inspector

How to save my voice memos in windows laptop as I already know how to synchronise ?

How to save my voice memos from iPhone to windows laptop after syncronising with iTunes which memos are 1hr longer?

Usually it goes to the last folder used or the folder the current PDF was opened from (I am getting the latter in my current Acrobat). If you want a different folder, you will have to go through the tree to your desired folder process.

How to save a datas from serial port?

How to save a datas from serial port?

Hi
I need some help about rs-232 communication. I want to make a vi witch can do this things:
-read a txt file (to simulate a serial port like when the datas are coming)
i will get 3 different data in serial port (like this: 121 213 135)
i want to save in a txt file what datas get my vi
so
-write in a txt file or draw in a diagram (or both)
so my problem is: read in serial port and save in a file and draw a diagram.
if anybody can help pls HELP ME because im a beginner in this problem.
I already do something but Im not sure that good.
Thx for all.

How can I hide a worksheet in a workbook in Numbers 1.5 for iPad?

How can I hide a worksheet in a workbook in Numbers 1.5 for iPad 2?

Numbers for the pad, as near as I can tell, does not do hidden sheets. There are some options though.
1. You can narrow the columns to the point that they are unreadable.
2 you can open and store those sheets is a different app, such as docs to go or quickoffice. Bury that app in a folder that would not be found easily.
To see the numbers help section, open numbers, tap the wrench and tap help.

How to save pdf file in database

Dear All,
my application is forms 6i and database is 8i,requirement is that how to save pdf file in database and users can view through forms

I'll apologize up front for the length of this post. I have a few database procedures I created that write a file to a BLOB column in a table as well as retrieve the BLOB from the column after it stored there. I have successfully stored many different types of binary file to the database using these procedures - including PDF files. I have not used these procedures in a Form so I can confirm that they will work, but theoretically they should work. I'm including the code for each procedure in this posting - hence the apology for the long post! :-)
Also, since these procedures reside on the database you will need to use Forms TEXT_IO built-in package to write your file to the server before you can use these procedures to store and retrieve the file from the database.
These procedures reads and writes a binary file to a table called "LOB_TABLE." You will need to modify the procedure to write to your table.
-- Author : Craig J. Butts (CJB)
-- Name   : load_file_to_blob.sql
--        : This procedure uses an Oracle Directory called "IN_FILE_LOC". If you
--           already have a directory defined in the database or would prefer to use
--           a different Directory name, make sure you modify line 21 to reflect the
--           new Directory name.
-- ==================================================================================
-- History
-- DATE        WHO         DESCRIPTION
-- 12/11/07    CJB         Created.
CREATE OR REPLACE PROCEDURE load_file_to_blob (p_filename IN VARCHAR2) IS
   out_blob    BLOB;
   in_file     BFILE;
   blob_length INTEGER;
   vErrMsg     VARCHAR2(2000);
BEGIN
   -- set the in_file
   in_file := BFILENAME('IN_FILE_LOC',p_filename);
   -- Get the size of the file
   dbms_lob.fileopen(in_file, dbms_lob.file_readonly);
   blob_length := dbms_lob.getlength(in_file);
   dbms_lob.fileclose(in_file);
   -- Insert a new Record into the tabel containing the
   -- filename specified in P_FILENAME and a LOB_LOCATOR.
   -- Return the LOB_LOCATOR and assign it to out_blob.
   INSERT INTO lob_table (filename, blobdata)
      VALUES (p_filename, EMPTY_BLOB())
      RETURNING blobdata INTO out_blob;
   -- Load the file into the database as a blob.
   dbms_lob.open(in_file, dbms_lob.lob_readonly);
   dbms_lob.open(out_blob, dbms_lob.lob_readwrite);
   dbms_lob.loadfromfile(out_blob, in_file, blob_length);
   -- Close handles to blob and file
   dbms_lob.close(out_blob);
   dbms_lob.close(in_file);
   commit;
   -- Confirm insert by querying the database
   -- for Lob Length information and output results
   blob_length := 0;
   BEGIN
      SELECT dbms_lob.getlength(blobdata) into blob_length
        FROM lob_table
       WHERE filename = p_filename;
   EXCEPTION WHEN OTHERS THEN
      vErrMsg := 'No data Found';
   END;
   vErrMsg := 'Successfully inserted BLOB '''||p_filename||''' of size '||blob_length||' bytes.';
   dbms_output.put_line(vErrMsg);
END;
-- Author   : Craig J. Butts (CJB)
-- Name     : write_blob_to_file.sql
-- Descrip : This procedure takes a BLOB object from a database table and writes it
--             to the file system
-- ==================================================================================
-- History
-- DATE        WHO         DESCRIPTION
-- 12/11/07    CJB         Created.
CREATE OR REPLACE PROCEDURE write_blob_to_file ( p_filename IN VARCHAR2 ) IS
   v_blob      BLOB;
   blob_length INTEGER;
   out_file    UTL_FILE.FILE_TYPE;
   v_buffer    RAW(32767);
   chunk_size BINARY_INTEGER := 32767;
   blob_position INTEGER := 1;
   vErrMsg     VARCHAR2(2000);
BEGIN
   -- Retrieve the BLOB for reading
   BEGIN
      SELECT blobdata
        INTO v_blob
        FROM lob_table
       WHERE filename = p_filename;
   EXCEPTION WHEN OTHERS THEN
      vErrMsg := 'No data found';
   END;
   -- Retrieve the SIZE of the BLOB
   blob_length := DBMS_LOB.GETLENGTH(v_blob);
   -- Open a handle to the location where you are going to write the blob
   -- Note: The 'WB' parameter means "Write in Byte Mode" and is only
   --          available in the UTL_FILE pkg with Oracle 10g or later.
   --        USE 'W' instead for pre Oracle 10q databases.
   out_file := UTL_FILE.FOPEN('OUT_FILE_LOC',p_filename, 'wb', chunk_size);
   -- Write the BLOB to the file in chunks
   WHILE blob_position <= blob_length LOOP
      IF ( ( blob_position + chunk_size - 1 ) > blob_length ) THEN
         chunk_size := blob_length - blob_position + 1;
      END IF;
      dbms_lob.read(v_blob, chunk_size, blob_position, v_buffer );
      UTL_FILE.put_raw ( out_file, v_buffer, TRUE);
      blob_position := blob_position + chunk_size;
   END LOOP;
END;Hope this helps.
Craig...
-- If my response or the response of another is helpful or answers your question please mark the response accordingly. Thanks!

How to save in different worksheets in a single workbook

Similar Messages

Maybe you are looking for