How to save new edits and text to photo without creating a new file

I am a new user of PSE 7. I am able to enhance and add text to my photos but can't save the edits without creating a new PSD PSE file in addition to the original unedited photo. How do I save the phto itself as edited?

99jon wrote:
If you really want to make your changes irreversible then use “Save As” and select file type from the dropdown list e.g. jpeg and enter the exact same file name as the original. Click OK to save and OK to overwrite the original.
While this of course is the answer to the question, the idea of overwriting the original is simply a bad idea. If you do this, you can never get back to your original and start again. That text will always be there.
I advise the original poster not to do this. Save your edits as a different name.

Similar Messages

I've bought my 1st Mac, since than I've replaced my old disk to a new one - and at the lab they created my new admin's name as admin.. I've changed it after 'root'ing - and now I can't find my photos either at iPhoto/photo booth,what can I do to restore ?

I've bought my 1st Mac, since than I've replaced my old disk to a new one - and at the lab they created my new admin's name as admin.. I've changed it after 'root'ing - and now I can't find my photos either at iPhoto/photo booth, what can I do to restore restore them, they are very importent to me !!!
Please I'll be thankfull.

I stated that I did try to do all of this when I first set up the new computer...I did do the Setup Assistant numerous times but my old computer kept freezing half way through. Even if I did it when I first got the new computer back in Septemeber, I would have had the same issue b/c my old computer has been 'broken' for a while. My old computer can't handle doing too much at once and I think the setup and then migration functions I tried were too much. That's why I was hoping I could use the migration function piecemeal. I wish I could just check off the exact files and folders I want vs. having to choose it at the 'user' level...that's too much for my old computer to have to transfer.

How to save an edited PDF in Acrobat Pro without any compression

Hi,
I just edited an existing PDF in Acrobat Pro 9 - actually I inserted some high resolution images in TIFF via the Touchup tool.
What do I have to do to save it without any compression of the TIFFs - I tried a lot, but the outcome is always compressed, showing artifacts.
Thanks

First, editing PDFs is really only for minor fixups. There is generally no word wrap or such when doing such editing and often then seem to go downhill fast. To edit text, you have to have the font available. If the file was scanned and the OCR applied was searchable text, the only option to edit what is displayed is with a graphics editor, typically PhotoShop. PhotoShop allows Acrobat to have edited graphics and then be reinserted in the file (I don't do it, so can't give details). ClearScan replaces what is seen on screen in the graphic with the text. In that case, you see all of the text and the corresponding errors (often many). You may want to load a graphic (bitmap) with text showing or use a scan and try the various versions of OCR to see what I am talking about. That may help you see the options. Searchable PDFs is more useful if an original is critical, such as in the legal profession.

When I try to log into iCloud the login page offers me my old email address rather than my newer one - and for which I have created a new password. I am unable to activate iCloud. Suggestions welcome.

Earlier, I changed my Apple account details to reflect my new email address. I also changed the password. iCloud seems not to 'know' this. It's service is disabled until I login in. But the default email address shown on the login page is the old email address. I can find no way of telling I cloud that I have new account details.

To change the account, go to System Preferences>iCloud, sign out, then sign back in with your revised credentials. If they aren't accepted, recreate the old ID at https://appleid.apple.com/ and changing the primary email address back to the old one (no need to verify the email account). Then sign out of the old ID on your Mac, providing your current password if prompted. Once you have signed out, change your ID back again, then go to System Preferences>iCloud and sign back in with your updated credentials.

HT1766 how do i print or save my imessages and text messages from my phone?

how do i print or save my imessages and text messages from my iphone?

When viewing the SMS messages, hit edit. You then have the opportunity to select whatever messages are needed. Forward these to your email or wherever you wish. You then have a text transcript in the body of an email that you can cut/copy/paste into Pages/Word/etc. for printing.

How to save an edited viceo clip in premier elements 11 to my organizer (windows 07)?

How to save an edited video clip in premier elements to my organizer so that I can add teh edited video clip to my slide show on windows 7 operating system?

sanford5
This is not Adobe. We are Premiere Elements users trying to help other Premiere Elements users with their Premiere Elements workflows. Under those conditions, only Adobe may have the opportunity to access your computer in troubleshooting session between you and them. You can use the following link to contact Adobe via its Adobe Chat.
http://helpx.adobe.com/contact.html?product=premiere-elements&topic=using-my-product-or-se rvice
When the link opens, click on the statement "I still need help" to bring up Adobe Chat.
I have no idea if they will charge you a fee for the service ($40 US dollar/hour). It might not even help you (fee or no fee) because you do not have the latest version of Premiere Elements.
What you ask is easy enough. Let me try again with a step by step to see if we can get this working for you in principle and then fine tune the details.
1. Export your Timeline to a file, using Publish+Share/Computer and then one of the choices
Adobe Flash Video, MPEG, AVCHD, AVI, Windows Media, QuickTime, Image, Audio. I do not know what your project settings are, but I am going to guess at NTSC/AVCHD/Full HD1080i30. That would represent 1920 x 1080 @ 29.97 interlaced frames per second.
The following is going to be a mini test run in principle so we will cut to the core and overlook some things.
Go to Publish + Share/Computer/AVCHD/ and set Presets = MP4 - H.264 1920 x 1080p30.
Note that there is a field for Save In: near where you set Presets. Set the Save In for Libraries/Documents not C:\Program Files\Adobe\Adobe Premiere Elements 11. Keep out of the Program Files for matters such as these.
Go to the Elements Organizer 12 File Menu/Get Photos and Videos/From Files and Folders and then browse to and select your MP4 file that you have saved in Libraries/Documents.
You now should have your video represented in the Elements Organizer 12 with a thumbnail.
Please let us know if that works for you. If not, then please let us know where you need supplemental help to get the task completed. I will re-write if necessary.
We will be watching for your results.
Thank you.
ATR
Add On...A little side note for later...If you took your file saved to the computer hard drive and imported that back into Premiere Elements with Premiere Elements' Add Media/Files and Folders, you would get
a. the file imported into a new project
but also
b. a copy of the file automatically placed in the Elements Organizer 12.
If the ideas seem overwhelming, please take the steps on one at a time and follow exactly what is written. You should do fine.

How can I save my data and the date,the time into the same file when I run this VI at different times?

I use a translation stage for the experiment.For each user in the lab the stage position (to start an experiment) is different.I defined one end of the stage as zero. I want to save the position , date and time of the stage with respect to zero.I want all these in one file, nd everytime I run it it should save to the same file, like this:
2/12/03 16:04 13567
2/13/03 10:15 35678
So I will track the position from day to day.If naybody helps, I appreciate it.Thanks.

evolution wrote in message news:<[email protected]>...
> How can I save my data and the date,the time into the same file when
> I run this VI at different times?
>
> I use a translation stage for the experiment.For each user in the lab
> the stage position (to start an experiment) is different.I defined one
> end of the stage as zero. I want to save the position , date and time
> of the stage with respect to zero.I want all these in one file, nd
> everytime I run it it should save to the same file, like this:
> 2/12/03 16:04 13567
> 2/13/03 10:15 35678
>
> So I will track the position from day to day.If naybody helps, I
> appreciate it.Thanks.
Hi,
I know the function "write to spreadsheet file.vi"
can append the data
to file. You can use the "concatenate strings" to display the date,
time as well as data... Hope this help.
Regards,
celery

How can I save a page and all its component parts in a single file, like IE does as an MHT - it's much easier for mailing to people where page address not available?? (as in output from an airline booking site, for example)

how can I save a page and all its component parts in a single file, like IE does as an MHT?
It's much easier for mailing to people where page address not available?? (as in output from an airline booking site, for example)
It is simply too painful to have to zip everything up into a single file to send. MHT format has been available for years now from IE, and with every new FF release it's the first thing I look for. I have been using FF for years, and hate having to come out of it, over into IE |(which I even took out of startup) and key everything in again, in order to send somebody something in a convenient format that they can open with a single click.
I can't believe this hasn't been asked before, so have you looked at it and rejected it? Have MS kept the file format secret?
Thanks
MG

This is not really an answer just my comments on your question.
I am sure I recollect efforts being made to get mhtml to work with FF.
Probably the important thing to remember about .mhtml is that if other browsers do support it they may need addons, and may not necessarily render the content correctly/consistently.
There are FF addons designed for archiving webpages, you could try them, but that then assumes the recipient has the same software.
You could simply save the page from FF to your XP pc; then offline open it with and save it using IE, before then emailing using FF, and attaching the .mht or mhtml file that you have now created on your PC.
As an alternative method, in some cases it could be worth considering taking a screen grab of the required page, then sending that to the recipient as a single email attatchment using either a bitmap or jpeg file format for instance.
Something such as an airline booking may be designed with a print option, possibly it could be worthwile looking at sending the print file itself as an email attachment.

How to save my emails and adressbook files from an old ibook?

How to save my emails and adressbook files from an old ibook (bought around 2002) ?
The screen from the old ibook doesn´t work anymore (logicboard problem I guess).
I saved everything else with starting it in target modus. That worked fine.
I want to delete the files after that as well, because I wanna give away the old ibook and don´t want anyone to read my emails!
Little helpers I have:
A running MacBook
External Screen (and cables to connect)
Fire Wire Cable

Don't know how helpful this will be but I often copy mail from one computer to another, I drag the mail from the mail window to the other computers drop box, then from the other computer double click it and mail asks me what I want to do with it, of course without a screen you'd need to use back to my mac.
If you don't have back to my mac running, you could set up a second user account on the newer mac, import everything via target mode as suggested by c above, and then drag the mail to the first user account drop box.

Create Separate Views for New,Edit and Display forms in Infopath

Hi,
I need to create a separate views for New, Edit and Display forms in infopath.
For ex : I need a Submit Button on Display form and not in New/Edit forms.
I tried, but i amnot able to get the changes.
Regards, Shreyas R S

I just validated my approach in a 2013 farm, this is precisely how it's done!
Step 1) List > Display Form
Step 2) Change the View within the Web Part Properties. In your screenshot it looks like you simply went to View Item on the single item, which is not the direction I gave =P.
**Assuming you've already created the multiple views within InfoPath, this allows you to set them up as distinct defaults for New, Edit and Display, let's make that clear. If you are not even to the point of having separate views, that is just in InfoPath,
Page Design tab, far left, New View button

I have the old iphone 3g and haved ordered 4s. Is there a way to save your phone and text messages from old phone

I have an old iphone 3g with ATT and have ordered the 4s with verizon. Is there a way to save phone messages and text to new phone?

Don't believe so - I don't believe it is possible to transfer the backup for a GSM iPhone to a CDMA iPhone and vice versa.
http://support.apple.com/kb/HT2109

How do i play pandora and hulu on apple tv from my new mac book pro?, how do i play pandora and hula on apple tv from my new mac book pro?

how do i play pandora and hulu on apple tv from my new mac book pro?

Welcome to the Apple Community.
Unfortunately that's not possible.

How do I block calls and texts on a prepaid phone? Says service unavailble when I try to do it through VZW

How do I block calls and texts on a prepaid phone? Says service unavailble when I try to do it through VZW

bathgate69, sorry for this inconvenience. Which make/model phone do you have?
For your convenience, you can also reach our Prepaid customer service department at 888-294-6804 for help, as well.
LasinaH_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

How do I get email and text message notifications when my phone is locked?

How do I get email and text message banner notifications on my iphone when the phone is locked? When I had iOS 6 I could get notifications with sound and banner. Now that I have iOS7 I can't see notificaitons when the phone is locked.

See if this support document about Notifications helps. http://support.apple.com/kb/HT3576

I have 2 itunes accounts. I can no longer use my first one for purchases so I had to start a new one and it will not sync from my new one without deleting everything on my same ipod from my previous account. How do I sync between both accounts?

I have 2 itunes accounts. I can no longer use my first one for purchases so I had to start a new one and it will not sync from my new one without deleting everything on my same ipod from my previous account. How do I sync between both accounts?

Wayland wrote:
The CS.com service account has long been closed. I cannot get it to respond to my years ago password for that account. So I ask them to send me a new password and of course it goes to my years ago email number.
Don't have it send email.
Answer the security questions.

How to save new edits and text to photo without creating a new file

Similar Messages

Maybe you are looking for