How to save notes on the computer

My iPod touch 5th gen broke and the iTunes store is replacing but I dont want to loose all of my notes in the Notes App. Can I save them to the computer?

What kind of computer? Do you have iCloud installed on both the iPod and the Computer? Do you have your notes turned on for both in iCloud?
Cheers,
GB

Similar Messages

How to saves electricity on the computer using Windows 8.1

Hello guys!
I have a problem with save on electricity.
The advance in the cost of living was not followed by higher wages,
included electric.
I never have enough money to pay my bills every month. I'm always in the red.
I'm using Windows 8.1. I use it alot everyday, 18h/a day. I want a software saves electricity on computer. Please help me.
Thanks a lot.
Danny | Twitter |
Google+ | Blog Gaming Monitors

You could save energy by adjust brightness and change power plan in your PC, take a look at:
http://windows.microsoft.com/en-US/windows-8/tips-save-battery-power
Make sure set your PC to go to sleep mode when you won't use it for a while.
You may take a look at:
http://microsoft.greeneritchallenge.org/TrainingSection/#UseSmart
http://www.microsoft.com/environment/

Where does 3.0 save synched Notes on the computer?

Where does 3.0 save synched Notes on the computer?
thanks

Solved now thanks to another discussion.
Attempting to sync brought up a message 'Syncing Notes' but I couldn't find them.
A terminal search revealed no sign of Notes.mbox in my ~/Library/Mail/Mailboxes folder even after multiple sync attempts. I had a look to see if there was a Notes.imapmbox there as well, as IMAP mailboxes have a different suffix but that wasn't there either.
The poster advised taking the following steps (first make sure that you have Sync notes checked in the Info tab of iTunes:
1. eject the iPhone from iTunes and disconnect it from the USB port
2. force quit iTunes using Command-Q
3. switch off the iPhone completely
4. reboot the iPhone
5. re-connect the iPhone via the USB port
6. allow the sync to take place
I had my ~/Library/Mail/Mailboxes folder open in a Finder window and shortly after the sync, up popped Notes.mbox. I still didn't see anything under Reminders in Mail but I selected Mailbox/Rebuild in Mail and now I have Notes available under Reminders. I have five active email accounts, each with a Notes folder available, but the one note I had left after losing all the originals during one of my sync attempts appears under On My Mac.
To be honest, now I have got it working, I'm not sure how much use it is so I doubt if I will use it. I had thought that it would sync via Mobile Me and that there would be a desktop application to go with the iPhone one, or it would be integrated into iCal.

TS2972 I have 4 Apple TV's. All set up to Home share. One will not see the computer. It is also the only 720 I have. The other three are 1080's. How do I get the 4th one (the720) to recognize my Mac?

I have 4 Apple TV's. All set up to Home share. One will not see the computer. It is also the only 720 I have. The other three are 1080's. How do I get the 4th one (the720) to recognize my Mac?

Need more information to help you, but I am providing some suggestions. Sorry if you are past these type of basic things. But didnt really have much to start with and understand your technical level to start with.
Have you got into Settings > Computers > Turned on Home Sharing (Note: You must use the some Apple ID used by the iTunes library on your MAC for them to see one another)
How is your MAC connected to the network vs the 720 ATV2? Is one WiFi and the other Ethernet? Have you tried switching the ATV2 to WiFi if Ethernet?
Has the MAC been restarted since this started happening? Same with your Router and any other networking device being used? Sometimes an IP conflict can arise in your networking and most consumer networking equipment does not know how to "self heal" without a reboot.
Make sure you have given those things a whirl and share back your results. Any other information you can provide, such as how you connect to your network from each ATV and MAC.

How can I take my ipod music and put on my ipad do not have the computer that the ipod was downloaded on.

I have an ipod full of music but do not have the computer is was loaded on. Can I get that ipod loaded on my new ipad 2.

Welcome to the Apple Community.
Unfortunately not without a computer, unless you are signed up for music match. You can redownload purchased content but not the rest of your library.

How to save SMS on my computer ?

Hello,
I have an iPhone 3G which runs 3.1.2. & I'd like to know how to save SMS on my computer to give more free space in my phone and keep it on my Hard Disk.
Thx

Thank you Josh for a great tip ... In regards to the original question of 'how to save sms to computer', it made me wonder of all the shortfall of the iPhone. Nokia has Nokia PCSuite, Motorola has Mobitools, all are great application to sync the mobile phone with computer. Given the status of the iPhone and all of its wonderful application, why is it that such simple function such as transfer bluetooth to bluetooth or just saving the sms is not available?

HT1296 Can't get my Music off of my iPhone 4. My computer died & had to get a new one, so now I cannot sync my iPhone 4 with the new computer, without losing all of my Music, because the only Music I have is on the iPhone 4 only, not on the computer. Help

Can't get my Music off of my iPhone 4...
My computer died & had to get a new one, so now I cannot sync my iPhone 4 with the new computer, without losing all of my Music, because the only Music I have is on the iPhone 4 only, not on the computer. No Backup anywhere : (
If I choose to sync it tells me all of the Content that does not match the iTunes library on the computer will be erased, do you want to proceed & I have to say no.
How do I replace the music library on my Computer with the Music on the iPhone?
I got my pictures off because you can access them when you connect the iPhone using Windows 7 but you cannot see any of the music so you cannot access it when using windows so don't know what to do...
Help...

The music sync is one way - computer to iphone. The only exception is itunes purchases. File>Transfer Purchases
It has always been very basic to always maintain a backup copy of your computer for just such an occasion. Use your backup copy to move everything to your new computer.

Bootcamp 5.1 Windows could not prepare the computer to boot into the next phase of installation

I've searched the internet, I've tried solutions on some of the discussions on here:
Windows 8.1 install fails on new 2013 Retina MacBook
https://discussions.apple.com/message/23490854#23490854
How to install Windows 8.1 on Haswell MBP
https://discussions.apple.com/message/23545484#23545484
Windows 8.1 Install Fails on New 2013 Retina MacBook, Users Report
http://wind8apps.com/windows-8-1-install-fails-new-2013-retina-macbook/
(Can't try this one because I don't have physical media or a burner and don't want to upgrade to 8.1)
Tried maskedferret's and jarvil's instructions that might work for others but not for me. Also the process must be older version of disk utility. There is no "minus" to remove a partition in the one I have.
Half the problem is those threads are so long with people posting up their problems that are not even the same problem. So then you have to sift through all these responses that aren't even really releated.
If you're problem isn't this problem then please don't use this thread to solve another issue.
“Windows could not prepare the computer to boot into the next phase of the installation. To install Windows, restart the installation.”
I can't find in the release notes of any beta Maverick update that this is being addressed.
1) Does anyone know if there is a fix coming out for this?
2) Is there some solution that doesn't require to have physical media?
     a) I have Windows 8.1 iso and product key
     b) I have a 32gb USB stick that I had Bootcamp format
     c) I have a spare 16gb USB stick. Both are USB 2.0 so I can't do Windows To Go. Maybe I should get one.
3) I have no idea how tell which MacBookPro I have since no one at Apple seems to believe in model numbers. I just ordered it online two weeks ago and received it this week so I guess it's the "latest" model hardware wise. Running 10.9
The cloest possible solution I came across was to boot up Windows 8 OS on a USB stick (Not the install) and run diskpert or fdisk for mbr thought I can' try this out because I don't have Windows To Go. I'd rather have it worked problem from Apple if I can figure out when they plan to update I might be willing to wait.

Finally got a physical CD and to the third link option still same issue. Even worse actually as even after formating the partition I get a "Windows cannot be installed on this disk. The selected disk is of the GPT partition style"
Found my "-" minus remove parition in Disk Utility. Will attempt maskedferret's again

Windows Could Not Update the Computer's Boot Configuration. Windows Server 2012

I am trying to install Windows Server 2012. When installing, I get the message Windows Could Not Update the Computer's Boot Configuration. Installation
cannot proceed. It cancel the installation. Can anyone help me with my problem?

Hi,
Any update about the issue?
Please post more detail information about the issue?
How did your do the installation? clean install or override install?
Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

I am using system 10.8.2 and have an issue with the screen saver not filling the screen. the desktop does, but not the screen saver. I find adjustments for the desktop, but not the saver. Would appreciate any suggestions.

I am using system 10.8.2 and have an issue with the screen saver not filling the screen. the desktop does, but not the screen saver. I find adjustments for the desktop, but not the saver. Would appreciate any suggestions.

I have a group of my images that rotate, and yes it happens oneach. I do believethat I have at one time had the images cover the entire screen, however I cannor remember how I made that happen, just like the desktop. I am sure it is old'ites setting in!

The file may be corrupt. The file header checksum does not match the computed checksum.

I just put Vista Home Premium on a computer I was going to give to my son. Upon adding some hardware I kept getting the above screen. "The file may be corrupt. The file header checksum does not match the computed checksum.' When I booted in safe mode and slow boot, it hung on crcdisk.sys. I removed everything except the keyboard hhd dvd and fdd and it still does the same thing. I tried to reinstall Vista but it keeps hanging. From reading a lot of other threads this seems to be a big problem. I doubt if the product should have been marketed. But.... If anyone can help me get it booted I would like to try XP instead. I tried to install XP on the same drive and it hungs there too.

Hi ballen6721,
Thank you for the post.
This issue can occur if the newly installed hardware device is incompatible with the system.
Based on the current situation, I suggest trying the following steps to troubleshoot the issue:
Method 1 Device Clean Boot
============================================
Please unplug all unnecessary devices such as sound card, printer, network card and TV card.
Method 2: Startup Repair from the Windows Recovery Environment (WinRE)
============================================
1. Insert the Windows Vista installation disc into the disc drive, and then start the computer.
2. Press a key when the message indicating "Press any key to boot from CD or DVD …". appears.
3. Select a language, a time and currency, and a keyboard or input method, and then click Next.
4. Click Repair your computer.
5. In the System Recovery Options dialog box, choose the drive of your Windows installation and click Next.
6. At the System Recovery Options Dialog Box, click on Repair your computer.
7. Click the operating system that you want to repair, and then click Next.
8. In the System Recovery Options dialog box, click Startup Repair.
Method 3: Use the Windows Recovery Environment (WinRE) to run System Restore ============================================
1. Insert the Windows Vista installation disc into the disc drive, and then start the computer.
2. Press a key when the message indicating "Press any key to boot from CD or DVD …". appears.
3. Select a language, a time and currency, and a keyboard or input method, and then click Next.
4. Click Repair your computer.
5. In the System Recovery Options dialog box, choose the drive of your Windows installation and click Next
6. At the System Recovery Options Dialog Box, click on System Restore.
7. Follow the System Restore Wizard instruction and choose the appropriate restore point.
8. Click Finish to restore the system.
Note: If you computer is an OEM one, the method to enter WinRE can be different, you may contact your OEM to consult how to enter WinRE.
Can we start the computer now?
If the issue persists, please help confirm the following points:
1. What hardware changes have you made recently?
2. Can we enter Safe Mode now?
I look forward to hearing from you.
Best regards,
Tim Quan
Microsoft Online Community Support

Ipod nano 3 how to save it to new computer? I have no back up of it

Ipod nano 3 how to save it to new computer? I have no back up of it

Didn't mean to put the ipad 3rd gen wi fi on there please ignore

I just want to know how to save some of the music manuscript i have created under songwriting, in to a format that I can email to a non-apple PC so that they can print it for me. How

I just want to know how to save some of the music manuscript i have created under songwriting, in to a format that I can email to a non-apple PC so that they can print it for me. How would I do that?
Thank you,
Peter Michaels.

And you just like helping people?
That is just the way this forum works - users get help from other users and learn from others and like to contribute if they see they can help.
My latest challenge was typing in melodies and chords of songs I'd written on the piano. But using the Musical Typing in register C3 I inserted all the notes by playing on the imac keyboard (and written in the treble clef). The only problem is you cant insert the chords at the same time. Now I have an empty bass clef, which requires chords be inserted in register C2 and I dont know yet how to do that.
To fill in the chords: Join a melody track and a bass track, like this:
- Create a new software track and record the chords separately with musical typing.
- Create a new track and copy your melody loops there (just as backup, if something goes wrong)
- Do the same with the track containing the chords.
- Then select all loops in the copies of the melody track and the copy of the chords track and select from the main menu
Edit -> Join.
Now you should have a track that contains the bass as well as the melody and both staffs should be filled in the track editor, so you can print both at the same time.
However, there will be some notes assigned to the wrong staff - very low melody notes will appear in the bass cleff, very high chord notes will appear in the melody cleff - and I don't see how you could fix that in GB.
Good luck
Léonie

How to save bookmarks on your computer

How to save bookmarks on your computer and import them later

Take a look at the articles below.
[[How to use bookmarks to save and organize your favorite websites]]
[[Use bookmark folders to organize your bookmarks]]
[[Export Firefox bookmarks to an HTML file to back up or transfer bookmarks]]
[[Import Bookmarks from a HTML file]]
I hope that helps.

How to locate ipod on the computer

How to locate ipod on the computer without find my ipod?

If you did not turn on the FIndMyiPod featiure or if the wifi is not on or connected then yo have to find it the old fashioned way.. Apple will not help.

How to save notes on the computer

Similar Messages

Maybe you are looking for