How to save or export from iMovie?

I have version 10.0.4. I cannot share or export or save my movie so I can use it in any way. I can share individual clips to Theatre, but not the whole movie. How can i use my movie if I cannot get it out of iMovie?
It seems that this is a universal problem. Is this app simply a useless piece of junk?
It also seems to me that we used to have to finalize a movie project, but there is no finalized option anymore???

Thanks Josh, that's some help, but if I can impose on you for a little more, I should back up a little.
I have a movie as an event which I have done considerable editing on and I consider it a finished product. When I select the event, I can export it too, but it's made up of 5 clips and no matter how I try to export it, it always ends up as 5 separate files. I need it as one file for ease of operation.
Can't seem to find a way to merge the clips no matter what I try to export the whole thing.
And in "All Projects" there are 2 clips of parts of it - one is 0 secs and the other is 57 secs. My whole event (movie) is a little over 8 minutes, again consisting of 5 clips.
If you can help me with this, I'll definitely be in your debt. I have spent many hours trying to make it work with no luck.
Thanks in advance
Fred

Similar Messages

  • How do I export from IMovie when "not enough room in Heap Zone" error code appears?   How can I correct,  what to Do.."export movie" insteand of Media browser or IDVD?  Finalize movie?  I want to burn it to DVD!

    How do I export from IMovie to Wondershare Creator to Make DVD and share hour long movie when I am unable to "publish" movie on Media Browser of IDVD because the error code "not enough room in heap Zone/ " appears and function is aborted. 
    I shortened the movie, that is no cure...Correcting date info on clips does not pertain.  Why would Apple throw roadblocks in your way without solving problems they create?
    A techie made an appointment on the phone and was totally incapable of addressing the problem.
    What is a heap zone????

    Instead of Share to Media Browser, what happens if you try Share Menu > Export Movie... (choose Large size) and save it to the Desktop?
    If that fails try Share Menu > Export using QuickTime...
    Then pick Movie to QuickTime Movie, then click on Options... which is just to the right of Export
    Under the Video section click on Settings...
    Then in the pulldown menu at the top, titled Compression Type: Choose Apple Intermediate Codec. Then click OK. And click OK again, and save it to the desktop. Once the .mov file is created, you can import that into iDVD and most likely it will work in Wondershare Creator if you prefer to use that instead.

  • How do I export from Imovie to Xilisoft?

    How do I export from Imovie to Xilisoft?

    Actually I did. And yes, I know that iDVD is no longer part of iLife.
    I could only guess as earlier iLife versions did include iDVD (I ahve it). If you had an iLife install DVD, you would be able to install it; as you didn't share what model/year your MBP was, it could have been included.
    My iMovie version is 9.0.9 and this is a screenshot of the options under "Share" in the File menu:
    You can export (different options available) to your desktop as a .mov and then import into a burn software (that will author/encode/"finalize" it so it can play in any DVD player). I'd never heard of Xilisoft, but that is not a burn software; iDVD is (still available as part of the retail iLife disks from online resellers), or Roxio Toast (excellent), or Burn (free) or google for others.

  • How to sync sound with movie when exporting from iMovie

    i have problems with sound synchronization with movie. mostly is movie delayed few seconds behind sound. also sound is repeatedly missing - under certain frequency. videos are prepared in iMac iMovie and exported in to the file and stored on synology. how to fix this trouble before exporting from iMovie?
    playing movie on imac works without problem

    I have a collection of Apple Support documents about passwords, some of which might be of help ...
    iOS: Forgot Passcode or Device Disabled
    http://support.apple.com/kb/ht1212
    iOS Passcodes
    http://support.apple.com/kb/ht4113
    Find My iPhone, iPad, iPod a Touch or Mac
    https://www.apple.com/support/icloud/find-my-device/
    Find My iPhone Activation Lock
    http://support.apple.com/kb/HT5818
    Find My iPhone Activation Lock: Removing a Device from a Previous Owner's Account
    http://support.apple.com/kb/ts4515
    Apple release Tool to check the Activation Lock Status of iOS Devices
    http://www.idownloadblog.com/2014/10/01/activation-lock-status-check/

  • The file "Acceptance Letter.pages" doesn't exist. Since installing Yosemite on MacBook Pro I cannot save or export from Pages. Just get the message at beginning of this post. How to solve problem?

    I cannot save or export from Pages since installing Yosemite on MacBook Pro . I just get the message at beginning of this post “Acceptance Letter.pages” doesn’t exist or whatever file title I have inserted How to solve problem?

    Thanks Peter but I was not seeking to store with I-Cloud. In fact I never store documents with I-cloud.
    I was in fact trying to store the files to Documents, which is where I usually keep such things.
    Have now discovered that if I leave the file untiled and simply close it, rather than saving it then it will save, oddly, to Documents. I then have to re-title it and move to the folder I want it in.
    Despite the above, even once it is titled and saved in Documents then if I reopen it I still cannot then Export it to a Word or PDF file. I still just get the message . xxxxxx.pages does not exist!
    Bad news as I am constantly exporting documents to Word and PDF to send to others who do not use a Mac

  • Quick Question (re:exporting from iMovie into iDVD)

    Hello everyone!
    I just have a quick question for you all... (I want to see if this is normal - I'm on a deadline and this is kind of freaking me out)
    So, we have a 20 minute or so video in iDVD. It plays fine, etc etc. The goal is to burn it to a DVD.
    I used the "Export -> to iDVD" function in iMovie, which launched iDVD.
    But here is the weird thing: nothing comes up in iDVD. It doesn't make a new file, doesn't give me anything... it is just open, waiting for me to create a new project to work with.
    YET, if I look in the Activity Monitor, I do see that EncoderServer (using 123% CPU) and ThumbnailServer (both iDVD processes) are running.... but shouldn't iDVD have told me it is working or that it is dealing with data?
    This is very un-"apple". I totally would have expected a progress bar of some sort in iDVD telling me it is working or something.... or is something wrong and I should try to export it in a different way?
    (I guess the underlying question is: when you export from iMovie to iDVD, does iDVD normally give you any 'heads-up' that it is working? how long does it normally take to open the project in iDVD?)

    Hi Matt!
    when you export from iMovie to iDVD, does iDVD normally give you any 'heads-up' that it is working? how long does it normally take to open the project in iDVD?)
    Yes, and it's instant.
    What you should see is iDVD opening and asking you to create a new project, It will suggest naming it the same as the iMovie project.
    There are reports that exporting from Imovie to iDVD can produce problems. What I do is save the iMovie project and close iMovie. Open iDVD, create the new DVD project, then go the File menu in iDVD, scroll down to Import, and in the side menu select Video. This open your Movie Folder, wherein resides your iMovie project. Select it and it imports into iDVD in a flash.
    Remember: iMovie projects go in the Movies Folder, iDVD projects go in the Documents folder. Change that, and they get very confused and unhappy.

  • IDVD Stops Responding when Exporting from iMovie

    I'm using iDVD and iMovie (from iLife 06 and fully up to date) on a MacPro (also up to date on all software, MacOSX, Quicktime etc).
    This proceedure has worked before several times but now results in a non-responding iDVD every time I try it, including an archive and re-install and a complete new install of OSX and all software on a new partition.
    What I'm doing.....
    [1] Recording a TV programme on EyeTV (410) and exporting it to iMovie - sucessful every time
    [2] Edit the iMove project and add chapter markers and save project - no problem.
    [3] Export to iDVD - iDVD shows exporting in progress and whilst this is still showing iDVD launches
    [4] iDVD starts playing the music from a std theme for a few seconds and then stops. Then resumes the music after resizing the window and then after a couple of more seconds freezes. From the Dock I can see that iMove and iDVD are "not responding"
    [5] Eventually iMovie completes it's "export" and then starts responding normally. iDVD continues to show as non responding although I can move the window around the screen. I have to force quit iDVD to get it to close down.
    I have tried:
    Re-exporting the project from EyeTV
    Deleting the preferences files for iMove and iDVD
    Deleting the iLife suite and re-installing
    Doing an OSX archive and re-install
    Installing a fresh OSX (10.4.8) on a different drive and installing fresh software
    Running Disk Utility - clean bill of health on both drives
    Repaired permissions
    The Console reports the following errors when exporting from iMove to iDVD:
    ===== Tuesday, 24 October 2006 22:56:45 Europe/London =====
    [KN,10:57:08:852]/SourceCache/iDVD/iDVD-791/./PBProjects/iDVD/RemoteControlContr oller.m:348 : switchTheme: mIsPlaying = 0
    [KN,10:57:08:852]/SourceCache/iDVD/iDVD-791/./PBProjects/iDVD/RemoteControlContr oller.m:348 : switchTheme: mIsPlaying = 1
    [KN,10:57:11:968]/SourceCache/iDVD/iDVD-791/./PBProjects/iDVD/RemoteControlContr oller.m:348 : switchTheme: mIsPlaying = 1
    2006-10-24 22:57:53.394 iDVD[424] NSExceptionHandler has recorded the following exception:
    NSInvalidArgumentException -- * -[NSCFArray addObject:]: attempt to insert nil
    Stack trace: 0x954ee243 0x9264f2cb 0x9264f110 0x925dd399 0x000df708 0x000df806 0x00215e6d 0x002167ef 0x0021470b 0x001a0b4f 0x00184105 0x92627d78 0x92627222 0x92626fa9 0x92626811 0x92621ae0 0x00166dc7 0x9261e861 0x925f2ef1 0x925f2d1b 0x9151d6c5 0x9151d5f6 0x9151d4c2 0x92dda340 0x9325c63d 0x9325c056 0x93255ddb 0x93249d2f 0x0000ad5d 0x0000ab36 0x0000aa51 0x00000002
    Result - problem persists. I'm at a loss as what to do next. Any suggestions greatfully received.

    Yes, tried that when I deleted the preferences. Disk Utility did not report any permissions needed repairing.
    What really mystifies me is that this export to iDVD did work once and I expected it to resume once I'd created a fresh OSX install along with all the iLife apps on a new partition, but it remained the same!
    Perhaps there is some sort of other software conflict going on? I have Adobe CS2, MS Office, Toast and FMP installed all are latest editions. On the utilities front I have installed Stuffit Deluxe, Internet Cleanup, Contour USB controller for video editing and a LogicTech wireless trackball. Again all the drivers are the latest releases.
    Does anyone know if there are any preferences associated with the other not responding applications listed in my other post that I could try the delete-reboot trick on?

  • How do i burn dvd from iMovie

    How do I burn dvd from iMovie.  iMac has yesomite installed.

    Why is there no iDVD on my new Mac? How do I get it and how do I install it?
    https://discussions.apple.com/docs/DOC-3673
    To burn a DVD with iDVD from the latest version of iMovie, you have to export the movie using the Export button and select 480p as the size. Open iDVD and start a new project, then drag that exported movie file into the iDVD menu window, avoiding any drop zones you see.

  • I need a picture from an event that I only have video of.  Is there a way to get a jpeg/still shot exported from imovie clip?  I'm a fairly new mac user.

    I need a picture from an event that I only have video of.  Is there a way to get a jpeg/still shot exported from imovie clip?  I'm a fairly new mac user.

    John Codgell has some tips on how to use MPEG Streamclip to do this on this Discussion Thread:
    Helpful AnswerRe: can you make a still photo from clip

  • Audio drops when movie exported from iMovie into iDVD

    Hi there,
    I am a problem which I can't seem to fix.
    I have created a 7 minute long slideshow in imovie with MP3 files from iTtunes embedded. The video and audio are fine when exported as a MOV file (and within iMovie itself). But when exported into iDVD for burning, the audio drops out completely after 3 and a half minutes.
    I've tried updating iMovie, iDVD etc., deleting encoded assets as it says to do here: http://support.apple.com/kb/TA24043?viewlocale=en_US
    to no avail.
    Does anyone have any tips? My friend's wedding is on Saturday!
    Thanks so much.
    RR

    Hi
    A. I do not use "Share to iDVD" - BUT "Share to Media Browser" and as Large (not HD or other res.) - Works much better.
    B. When did it hang ?
    a. On Export from iMovie to iDVD
    b. When DVD is played on DVD-Player
    If last one - then
    • What brand of DVD did You use (Yes it matters)
    • What type of DVD
    • Free Space on Start-Up hard disk - How much
    • Burn speed - did You set down this - I do to x2 or x4
    Yours Bengt W

  • Exporting from iMovie '09 in different formats

    Does anyone know how to export from iMovie to a more acceptable format than .m4v because it doesn't appear to work on a powerpoint presentation and I would like to export it to .avi or .wmv or .mp4
    PD I'd need it to be no more than 10 MB even if it looses quality
    THANKS

    .m4v and .mp4 are the same thing, just modify the extension manually (or set up an Automator process if you need it frequently) and you should be all set.

  • Changing frame rate when exporting from iMovie '09 using quicktime has no impact on duration.  Why?

    Changing frame rate when exporting from iMovie '09 using quicktime has no impact on duration.  Why?
    I have a file created by digitizing an 8mm film at a rate of 24 fps. I would like to create a downloaded movie at a frame rate of 15 fps.  The Export using Quicktime option seems to provide that capability but the resulting file has the same duration as the original 24 fps file.  How can I get the exported movie to be slowed down?

    joegez,
    There is a feature you can use to slow down the video. In the project, move the mouse pointer over the clip, then click the gear icon. That brings up the Inspector. Click the Clip tab. Then you will see a feature there called Speed. Move the slider to the left to slow down the clip. Or you can enter a percentage in the box on the right.
    Hope this solves the problem for you.

  • Can I save audio only from iMovie video...?

    Can I save audio only from iMovie video...?

    vipfilmproductions wrote:
    Can I save audio only from iMovie video...?
    Sure.
    Choose Share>Export Using QuickTime.  Then select Sound to AIFF from the Export dropdown menu.
    The resulting will be an audio only AIFF file.  The Sound to AU or Wave work in the same way and will create audio files of those file types.
    Matt

  • How to save a datas from serial port?

    How to save a datas from serial port?

    Hi
    I need some help about rs-232 communication. I want to make a vi witch can do this things:
    -read a txt file (to simulate a serial port like when the datas are coming)
    i will get 3 different data in serial port (like this: 121 213 135)
    i want to save in a txt file what datas get my vi
    so
    -write in a txt file or draw in a diagram (or both)
    so my problem is: read in serial port and save in a file and draw a diagram.
    if anybody can help pls HELP ME because im a beginner in this problem.
    I already do something but Im not sure that good.
    Thx for all.

  • How do i move photos from imovie to iphoto

    How do I move photos from imovie to iphoto?

    You cannot put photos in a trailer. They are designed for videos.
    However, there is a way around this.
    Go to the Project Library view. Select your Trailer. Now, click FILE/CONVERT TO PROJECT.
    Now you can add photos.

Maybe you are looking for