How to save Outbound Queue(SMQ1) to SMQ1?

Hi All,
I just want to know is there a way that we can save the SMQ1 queue to SMQ3?
My scenario is say ECC <--> PI <---> Third party , i have queue name HR_1 in SMQ1 with 10 entries .
I have processed the first entry and in PI it got error for this first entry, left in HR_1 with 9 entries in SMQ1.
so i want to reprocess the 1 entry again from ECC and i want to save the 9 entries from SMQ1 to SMQ3.
after processing the first entry from ECC again , then i want to process the 9 entries from SMQ3 to SMQ1 and to PI
Is this possible?
Thank
Sai

Hi Sai,
go through this ...........Queue management in PI
Thanks & Regards
E.Ravi Channdra Reddy

Similar Messages

  • How to get back Queue name in SMQ1 when Data source is present in RSA7

    Hello Friends,
      Its very urgent issue.Please provide me your valuable solutions.
    1) I have Queue name in SMQ1 and Data source name in RSA7 are present for particular Data source in CRM source system. I deleted Queues in SMQ1 and they present in RSA7 so whenever I do changes in Data source record that changes i can see in RSA3 and DB table but I can't able to see that changes in RSA7.
    2) That Data source is Delta enabled and Initialization also set for that.
    3) when i do delta scheduling no records are coming in BI side.
    Please tell me how can i get back my Queue in SMQ1 and get changes reflects in RSA7 data source also.

    Try below:
    http://sharepoint247.wordpress.com/2013/05/24/handy-email-utility-for-any-sharepoint-project/
    interface IEmailConfigurationManager
    /// <summary>
    /// Gets Email Template by it's ID
    /// </summary>
    /// <param name="emailTemplateId"></param>
    /// <returns></returns>
    EmailTemplate GetEmailTemplate(string emailTemplateId);
    /// <summary>
    /// Gets Email Template by it's ID by updating the email template properties
    /// </summary>
    /// <param name="emailTemplateId"></param>
    /// <param name="subjectProperties"></param>
    /// <param name="bodyProperties"></param>
    /// <returns></returns>
    EmailTemplate GetEmailTemplate(string emailTemplateId,
    IDictionary<string, string> subjectProperties,
    IDictionary<string, string> bodyProperties);
    /// <summary>
    /// Add new email template.
    /// </summary>
    /// <param name="emailTemplateId"></param>
    /// <param name="emailTemplateSubject"></param>
    /// <param name="emailTemplateBody"></param>
    void AddEmailTemplate(string emailTemplateId, string shortDescription,
    string emailTemplateSubject, string emailTemplateBody);
    https://spemailutility.codeplex.com/
    http://social.msdn.microsoft.com/Forums/en-US/ef945d33-50c5-4b89-8bb9-32a95498b419/how-to-change-email-template-for-the-approval-workflow?forum=sharepointcustomizationlegacy

  • Urgent help- How to open Outbound queues

    Hi,
    I am new to SCM-APO, we have SCM 5.0 having CIF to R/3 4.7 Enterprise.
    In SMQ1 i can see lot of outbound queues present with status NOSEND in R/3.
    I want to push these queue manually how shoild i do it
    Please guide me as i m new to this area.
    Thanks
    Amit

    Hi Amit,
        Go to Transaction /n/sapapo/ccr i.e.CIF Comparision/Reconcillation of Transaction Data. then Click on
    Execute Comparision/Reconcillation Tab. Then Enter Parter System i.e ECC,then Proudct & Location.then Select Document to be checked like Production Order i.e Mfg Ordrs(with Reqs/Receipt , with Opernations),Planned Order,Purchase order etc. which you want to Transfer in ECC concern to the Product.Then Execute the Transaction.
       You will find Transaction data & result Documnet.Open the Transaction Data i.e Mfg Orders or Planned Orders.Then double click on Requirements/Receipts or Operations.You will find the objects in right hand side.Select all the objects & push in to R/3 with Push button R/3.
    Hope so it will help you to solve your problem.
    Regards
    Sujay

  • How to clear outbound Queue in  SXMB_MONI

    HI Experts,
    Unable to process the file in SXMB_MONI as a result the files are getting strucked with the QUEUE and now how to clear this queues for processsing the file...
    and another i have configure the server with 611 client but while executing the client of the server is showing 001 and we didn't observe initially as it is working fine but when we observed now it is found
    is this has an impact..
    do we need to do any other certain configurations at the Server end..
    regards,
    Kishore

    > There is no URL in SXMB_ADM, how to provide an url there, and even before we didn't get this problem as the files are successfully processsing for the past 3 months in PDN, and now we are getting this problem.
    >
    Hello,
    I have understood your problem but you are not following the steps which we are mentioning here.
    For your above problem you need to follow ONLY step no1 & 2 mentioned in the blog since steps are common for acitvating the proxy and thats way you are getting confused that why I am asking you to follow that blog.
    In the blog step 1 will simply help you creat the RFC destination.
    Step 2 will help you to use the above RFC destinaiton as an url.
    In opionion if you resolve this problem first then it will be easier to solve your queue problem.
    Please let me know if you need more help/clarification in this regard i will help you.
    Regards,
    Sarvesh

  • How to trigger tRFC queue in Transacation SMQ1

    Hi experts,
    How can I setup a queue table, if any field changed in this table, it will trigger tRFC in transacation SMQ1.
    Eg. Set JEST table changes can be captured in SMQ1.
    Thanks !
    Looking forward for replying...

    Hi,
    You may need to use the BTE concept. Details on this are available [in this doc|http://www.google.co.in/url?sa=t&rct=j&q=bte%20delta%20queue%20site%3Asdn.sap.com&source=web&cd=1&ved=0CB0QFjAA&url=http%3A%2F%2Fwww.sdn.sap.com%2Firj%2Fscn%2Findex%3Frid%3D%2Flibrary%2Fuuid%2Fd3219af2-0c01-0010-71ac-dbb4356cf4bf%26overridelayout%3Dtrue&ei=WMQKT6iODpGurAfvsbTQDw&usg=AFQjCNFzuJ5yyCfYcz27Mw5Cc-WtSTThpw]
    This may involve a good amount of coding, however.
    Regards,
    Suhas

  • Deleting Outbound Queues in SMQ1

    Dear Experts,
    System landscape: ECC 6.0, SRM 5.0
    I started intial load using DNL_CUST_PROD1 in R3AS and my outbound queue in SMQ1 (ECC) contained an SYSFAIL status. So I would like restart the initial load again from SRM.
    Can you please let me know if I need to delete this outbound queue or resetting the status to READY is enough.
    If I need to delete the queue, can you please let me know how to delete this outbound queue.
    Points will be rewarded.
    Thanks in advance,
    Bob.

    Hi Bob,
    I'm not sure if I completely understand your question.
    You can delete the outbound queue and start the initial load again. In order to do so, just select the queue (click on it once) and then select the trash can icon on the top left side. Or else you can just right click on the queue and select the "Delete" option.
    Hope this helps!
    Thanks,
    Aravind

  • Deleting an outbound queue SMQ1

    HI,
    Can you please verify, is it ok to delete an outbound queue in smq1? The situation is, we have tried a delta load but we already aborted it since it is not needed anymore. But when we check on smq1, the queue is still there and it's status is running (transaction executing). What will happen if that queue will be deleted? will it cause data lost? Please help. Thanks!
    Kind regards,
    Mike

    Hello Mike,
    This shouldn't be a problem. And there won't be any data loss. however you might see additional table entries in your CRM or ECC(depending on what was the destination) for the LUWs that were already processed in your delta load.
    Apart from that , no issues

  • Struck up with R3AD_* Queues in SMQ1(Outbound Queue in ECC Side)

    Hi ,
    I am using CRM Middleware for replicating business partner(BP) from CRM to ECC
    and material from ECC to CRM.
    BP and Materials are replicating well.
    My Issue is,
    while checking queues in SMQ1 (Outbound Queue in ECC Side), i am getting many queues are pending also
    status as "SYSFAIL".
    QUEUE Names are R3AD_000000123,R3AD_000000139,R3AD_000000141... R3AD_*,etc..
    I tried to unlock the queues and activated, afterthat also queue status is "SYSFAIL". Then i checked in CRM side
    Transaction Code SMW01,
    BDOC Details:
    BDOC State Description: Information no processing.
    BDOC Type :BUS_TRANS_MSG.
    ERROR Message:
       a.Processing of document with GUID 4E57E4A5108162A7E10000000A0BE02A is canceled.
      b.Business transaction type ZEQQ does not exist.
      c.Validation error occurred: Module CRM_DOWNLOAD_BTMBDOC_VAL, BDoc type BUS_TRANS_MSG.
    Thanks and Regards,
    Ravi A

    Maintain a filter in ECC go to Tcode SM30 , then go to table/view and enter CRMRFCPAR click maintain and enter
    User CRM
    Object Name SALESDOCUMENT
    Destination xxxxxxxxxxxx
    Load Type delta download
    Queue Name
    Queue Name
    BAPINAME
    INFO
    InQueue Flag X
    Send XML
    CRM Release 700
    Logical system xxxxxxxxxxx
    this will stop the flow of ecc sales documents to crm
    this will also stop Bdcos in SMW01
    Please let me know if this helped

  • SMQ1 outbound queue

    Hi Experts,
    Could you please let me know the purpose of SMQ1 and SMQ2.
    Because when i saw the transaction SMQ1 i am able to see even the queues for
    0FI_GL_6
    0FI_GL_7
    1_CO_PA333ZPAC4.
    But when i saw the transaction LBWQ it only contains the Logistics related extract structures.i am aware of LBWQ where the user postings will be saved here with the help of VI Update.
    Regards,
    Sunil Kumar.B

    Hi,
    SMQ1 and SMQ2 is used to view the Outbound and Inbound Queue :-
    SMQ1 u2013 qRFC Monitor for the outbound queue You use this transaction to monitor the status of the LUWs in the outbound queue and restart any hanging queues manually.
    SMQ2 u2013 qRFC Monitor for the inbound queue. You use this transaction to monitor the status of the LUWs in the outbound queue.
    You can get more help from following link :-
    http://help.sap.com/saphelp_nw04/helpdata/en/76/e12041c877f623e10000000a155106/content.htm
    Navesh

  • Delete Outbound Queue : SMQ1

    Dear Friends
    I am upgrading my ECC6 PRD Server by EHP5.
    My Check Roadmap step has been completed with warnings!
    I Knew it to release and delete by the LBWE and LBWQ.
    But my question is that i need to delete it now in CHECK and PREPROCESSING phase.
    or
    Delete it in the DOWNTIME phase !  becuase, the PRD system in integrated with BI PRD server and the data is collecting each hourly.
    Please advise.
    A2EEMCEX 151 Entries for application "11" still exist in the extraction queue ->
      Long text:
        Cause
          Changing extraction structure &V#& for application &V#& is forbidden,
          because there are entries that have not yet been processed into an
          extraction queue for application &V#& for at least one client.
          If an extraction structure is changed to the entries that are still
          open in an extraction queue, then these are no longer able to be read
          and can cause terminations with the collective update.
        What to do
          Start the collective update using the function "Job Control" in the
          <DS:TRAN.LBWE>Logistics Extraction Structures Customizing Cockpit</>.
          To get an overview of the logistics extraction queues, see the
          <DS:TRAN.LBWQ>Logistics Queue Overview</>.

    Dear Anwer,
    As long as you are in prepare or uptime of the upgrade you can
    ignore the errors in the RSVBCHCK which say that there exist
    update records (as it is normal that there are update records
    in a system which is productively used).
    In the downtime there is also a check on update records. In the downtime
    this check cannot be ignored.
    You can also read note 328181.
    Please also refer to the upgrade guide with this regard.
    SAP Enhancement Package 4 for SAP ERP 6.0 ABAP:
    page 105********************************************************
    Outstanding or Incomplete Updates (Phase JOB_RSVBCHCK2)
    If there are any outstanding or incomplete updates, the upgrade stops in
    this phase with a message.
    If errors occur in this phase and you have not stopped production
    operation yet, you can skip these
    errors with ignore without entering a password. However, we recommend
    that you check for these updates and clean them up. The message is:
    Update records still exist - Please process
    page 103*******************************************************
    Update records still exist - please process
    Make sure that you have cleaned up all outstanding updates.
    Make sure that you have cleaned up all outbound queue RFC calls by the
    JOB_RSVBCHCK_R or JOB_RSVBCHCK_D phase (during downtime) at the latest.
    If you are still in the preparation phase (before the beginning of the
    Preprocessing roadmap step) and therefore in production operation, you
    must only delete the terminated updates.
    Also during the production downtime for such issues you can check the
    following information:
    This error is caused because the updates have been deleted but
    entries in tables related to the update process are not empty:
      - tables VBDATA,VBMOD and VBHDR should all be empty
    To avoid the error message , run report RSM13002 with "delete" option
    to delete update records as explained in attached note 67014. After
    that you can repeat the phase, the incidence should have been solved.
    -> 67014 - Reorganizing update requests
    Information remains same for EHP5 as well.
    Regards,
    Abhishek

  • Unprocessed Outbound Queues on SMQ1 with Status NOSEND...

    Dear Experts,
    We have following 4 Queues which have NOSEND status:
    BW0110BPARTNER_ATTR
    BW0110BPARTNER_TEXT
    BW0110BP_DEF_ADDRESS__A1
    BW0110CRM_SALES_ACT_1
    I cannot unlock this and activate these as the system displays message: LUWs in status NOSEND must be picked up by the application.
    I need your help to know how to process these queues.
    Best Regards, Murugesh

    Hi Murugesh,
        The four queues that you have mentioned are BW specific queues. These cannot be unlocked or activated from the CRM system. For BW queues in CRM, it has to be processed or called from the BW system. BW queues will always be in status 'No Send' in the crm system unless and until it is called by the BW system.
    Regards,
    Ratish

  • Need to know how to check the outbound queue in SAP for data flow into CRM

    Hi Specialist's,
    I have changed an entry in Customer Master Data in Sap r/3 and this change has come fine to CRM system.I checked the inbound BDOC in CRM ( Trn:SMW01) and it has come fine into CRM system.I am also able to see the affected field in CRM with new value.
    I need to know how to check this from SAP side i.e. I have checked the outbound IDOC list (WE02) but could not find the record.
    Is there any other way in SAP that i can check?
    Also please let me know if there is any other way except IDOC in SAP to send data from R/3 to CRM?
    Usefull answers will definitely be rewarded with points .
    Thanks,
    Abhinav.

    Hi Abhinav,
    There are no IDOCs generated in R/3 for replication. R/3 system calls BAPI and Function modules remotely on CRM system which are part of the Adaptors provided for middleware.
    Try to deregister the outbound queues in R/3 (Transaction SMQS) and see if you get an entry in the Outbound Queue (Transaction SMQ1). I have not tried this.
    If you don't get any entry in the outbound queue then definitely there would be some FM at R/3 end which would be calling CRM system remotely.
    <b>Reward points if it helps.</b>
    Regards,
    Amit Mishra

  • Queues stuck in SMQ1 and SMQ2

    Hi,
    In CRM Middleware, I am trying to do some Master Data upload of Sales Orders from CRM to R/3 but a queue  MCEX11 gets stuck on the R/3 side with 1 entry and status NOSEND
    Can you please tellme how to get rid of this? Also how can i avoid distribution locks on a document.
    On the CRM side also certain queues were stuck in the outbound SMQ1 with status NOSEND. How to process these  queues manually?
    I checked note 431345 and other related notes also. Would appreciate if someone can help me on this.
    Thanks.
    Rgds
    Priyanka

    Hi Priyanka,
    To clear the no send status entry, go to R3AS, select the object say for BP (Bupa_main) press enter and then execute, then open R3AM1 enter object name as Bupa_main and select Running and done and execute.
    Now you can open SMQ2 and click on each entry with nosend status and then click on activate queue in the top toolbar, this shld change the status to running and then click on refresh.
    The following is the list of Queue extensions that are used in CRM, all the queues start with these extensions:
    <b>Outbound queues</b>
    CDB*     Start queues for loads CRM -> CDB
    CRM_SITE*     Load queues for Mobile Clients
    CSA*     Send queues of CRM Server Applications
    EXT*     Start queues for loads CRM -> Ext.
    R3AI/R*     Start queues for loads from ERP Backend system
    R3AU*     Load queues CRM -> ERP Backend system
    <b>Inbound queues</b>
    CRI*     Initial load queues CRM -> CDB
    CRM_SITE*      Load queues from Mobile Clients
    R3A*     Load queues ERP Backend  -> CRM
    CSA*     Send inbound queues of CRM Server Applications
    Hope this answers ur query.
    Regards,
    Amit
    Message was edited by:
            Amit Singh

  • CRM 5.0 outbound queues to Mobile sales

    Hi all,
    We have upgraded from CRM 3.0 to CRM 5.0.
    I am looking at the outbound queues in SMQ1 that are bound to Mobile sales Sites and am not finding any data bundles other than the name of the Replication Object name in the LUW's of these queues.
    But in CRM 3.0 I am able to see detailed data bundles for any of the queues.
    Does this mean no data is actually being passed from CRM to Mobile Sales.
    At this point of time  I dont have my commstation up and running to verify this. So I am curious to know how else can I check this?
    Thanks.

    Hi KP,
    This is the default behaviour in 5.0...the queues are fine and you can go ahead with the sync using Conntrans.
    Regards,
    Ankan

  • Outbound Queues in CRM system

    Dear All,
    There are lot of outbound queues in our CRM production sytem which are older than one month,basis is asking wether we can
    delete those queues or not,request you all to help me wehter we can delete it or not.if anybody can put some light on how the
    queues are getting there then it will really helps..
    Thanks,
    Sapta

    Check in SMQ1 transaction. You can see whether you require them meant for any active extractors running delta or running in regular frequency for your loads.

Maybe you are looking for