How to save plain text attachments

I often get email with plain text attachments (e.g., source code).
Mail tries to be smart and displays the attachments in the body of the mail.
But I wold like to save them as usual. I can't even control-click on them
Does anyone have an idea what I can do?
TIA,
Gabriel.

I guess I should've said that up front:
Yes, I can highlight the text and save it in TextEdit, but that's way too tedious , because I get a lot of emails with several text attachments, and I have a hard time figuring out the boundaries between text attachments ...
Best regards,
Gabriel.

Similar Messages

I need to erase the contents of my phone and restore to factory settings. Does anybody know how to save your texts so you don't lose them? Can I back those up to iCloud? My phone was very likely hacked (Apple's advice was to call the police!)

"I need to erase the contents of my phone and restore to factory settings. Does anybody know how to save your texts so you don't lose them? Can I back those up to iCloud? My phone was very likely hacked (Apple's advice was to call the police!)"
That was all I could put in the initial "box." Then it brought me to this page with instructions on how to write a good sentence.
Proceeding ...
After going back and forth between Apple, AT&T and the police (all telling me to go to the other two) I took AT&Ts suggestion and got a new number. One tech warned against doing a backup, especially on my Mac, saying if my phone had been hacked then whatever bug was there would then invade my computer. But nobody knows how to determine if the phone has been hacked or a virus was planted there. Unfortunately I know who would have reason to do such a thing and all I can say is that he is at the top technologically and could easily do it. Almost impossible to prove, however.
So I need to preserve my text messages and my emails as well. I backed up my photos to that Microsoft product (One-Drive) and it froze (Surprise, Surprise) with four short videos to go, and no way of stopping that (when I tried it crashed repeatedly) so I'm in crisis mode here.
Help ...
Running 8.0 on 5S
Thanks!

Betty I don't know if you fixed your hacking problem but I feel your pain. I've seen some strange things going on between my iMac and my iPhone and Apple has told me the same thing, call the police which I have done. The hackers have stole 500.00 out of my checking account have access to every internet account I use and no matter how often I change the password their right back on the account. I closed my FB account 3 times only to have someone reopen it. Right now I've got a link in my reading list (Safari) that if I click on it, it allows me to log onto my FB account anonymously.
I've seen a green folder come out of no where while I was trying to delete my passwords out of keychain when that green folder was put into the key chain I was immediately locked out. I than went into system preferences to try to make changes to my security settings, when I clicked on the icon it wouldn't open. I've seen log files of automator receiving commands and sending out my personal information thats on my computer.
I have a legitamate program called iExplorer that allows you to look at the contents of your iPhone back ups and saw a transaction someone made at the Apple store for some full length movies, some albums, ibooks and other apps but when I called the iTunes store and they said none of those items were showing up on my account. If their not on my account how can they be on my iPhone 6? One day someone was using my gmail account and unknowingly used google maps to search for an Italian restaurant, than a Mexican restaurant than a coffee shop and their search showed up on my iPhone but I didn't have my gmail account installed on my iPhone 6. Using my computer I logged onto my gmail account and looked at the maps history and sure enough there were the searches when I'd hover my curser over the link it gave me the longitude and latitude of the where the hacker was when he was using google maps. I know whoever reads this thinks Im crazy but I've documented everything and can prove the things that I have mentioned in this post actually happened.
One day I had my laptop (pc) and my iMac next to each other as I was using both. when I clicked on airport it showed that my laptop and my iMac had made a connection and were actually communicating with each other. I know I didn't do it I don't know how. The iMac was logged into my iCloud account while my laptop wasn't. I have formatted my iPhone at least a dozen times, Apple and an Apple retailer have formatted my hard drive not to mention the numerous times I have formatted it but the hackers keep getting on my devices. Im formatting my lap top at this very second because during the course of the night I left the ethernet cable plugged into it and they locked me out of my c: drive, and configured the system so I can't download any updates from Microsoft, overtime I type in www.microsoft.com it changes to ww38.microsoft.com which takes me to a blank page. I right clicked on the page I was redirected to and read the java script and couldn't believe that someone had actually configured Internet Explorer to redirect me to a blank page when I tried to go to Microsoft. Apples answer to all this is there was nothing wrong with my iPhone or my iMac and if I thought there was a problem to call the police which I have done.
Theres no doubt the hackers are reading this while I type it or will read it and I simply don't care anymore. I no longer email anyone, don't use my iCloud account and have taken precautions to protect my credit but if I ever find out who has invaded my privacy to this extreme the police are going to want to talk to me because Im going to hurt them like they've never been hurt before

How to save a text or file in *doc from Pages?

How to save a text or file in *doc?

Igor,
Use either File > Export, or Share > Export, and choose the Word option.
Jerry

Text Edit Question: How Do I Create/Save PLAIN TEXT??

I've been using Macs now for over a year, and this is still an annoying quibble that I haven't sorted out. I don't know if this is the right place to raise this question or not, but there don't seem to be any other places for it, so it goes here.
How do create and save a simple, plain text, no code, no embellishments, file using this "TextEdit" program?
I'm familiar with Notepad in Windows. Used it for a million things for years and years. All it would do is "plain" (i.e. ascii) text. No frills whatsoever.
No I guess TextEdit is the Mac equivalent of Notepad? But it wants to do both "plain text" and "Rich Text Format," and apparently I haven't learned how to keep them separate.
I created a new file. I told it to make the file "plain text." Then I typed some stuff, saved and closed the file.
But when I reopened the file, I found all this crap in the header:
{\rtf1\ansi\ansicpg1252\cocoartf949\cocoasubrtf330
{\fonttbl\f0\fswiss\fcharset0 Helvetica;\f1\fnil\fcharset0 LucidaGrande;}
{\colortbl;\red255\green255\blue255;\red41\green81\blue169;}
\margl1440\margr1440\vieww9000\viewh8400\viewkind0
\deftab720
\pard\pardeftab720\ql\qnatural
\f0\fs24 \cf0 \
And all these slashes and other code-type crap that makes the actual text I typed unreadable.
So, somebody, please, tell me: how do I create a simple plain text file like I used to be able to do with Notepad, and not have to worry about it being all garbled when I go to re-open it.
Should be easy, but it's not.
--PS

If I format fonts, even in a "plain text" document, am I going to wind up with code again when I reopen it?
Not unless you save it as rich text.
Why is a "plain text" document even offering me bold and italics or any other kind of formatting?
Why would someone wanting to write plain text use bold or italics options? On the other hand, I'm sure many people would like to print and compose formatted text now and then even when they prefer to keep TextEdit in plain text mode for most of their work.
I miss notepad. All it did was plain text. No options to confuse things. Where is the Mac equivalent of THAT??
Try TextWrangler

How to get plain text out of a multi line text field in Client Side Object Model?

I am trying to read plain text from a MultiLineTextField in a List. This is how my code looks so far:
//Get connection
ClientContext context = new ClientContext("URL");
Web site = context.Web;
context.Load(site);
context.ExecuteQuery();
//Get list collection
ListCollection lists = context.Web.Lists;
context.Load(lists);
context.ExecuteQuery();
//Get specific list
List menu = lists.GetByTitle("menu");
CamlQuery camlQuery = new CamlQuery();
camlQuery.ViewXML = "<View/>";
ListItemCollection dishes = menu.GetItems(camlQuery);
context.Load(menu);
context.Load(dishes);
context.ExecuteQuery();
//Iterate through all dishes
foreach(ListItem dish in dishes)
Console.WriteLine("Dish: {0}:", dish.FieldValues["Name"]);
Console.WriteLine("Price: {0}:", dish.FieldValues["Price"]);
//Here I get my problem
Console.WriteLine("Ingredients: {0}:", dish.FieldValues["Ingredients"]);
In the last line where I try to read the ingredients, I am reading from a MultiLineTextField which is set to RichText. It is also supposed to stay in RichText format, as hyperlinks are supposed to be added there. The problem is that the output not only contains
div-tags but also some weird question marks I never added to the field. I am trying to solve this issue for a couple of days now but it seems that there are only two possible solutions.
Set the field from RichText to PlainText, which is not an option in my case.
Use Regex to remove the div-tags. Please do not suggest this option. Mainly because I do not consider this to be a clean solution for this issue. Plus, I tried it and it removes the tags but those weird question marks stay.
There seems to be a third option I found
here. It is also mentioned in this
question and it seems to work. But I can not get it to work for me. This is how it looks:
string myString = item.FieldMultiLineText[Field_Name];
So I wonder what is item supposed to be here? I suppose it is not a
ListItem because in my case it does not offer a FieldMultiLineText-property.
A short, informative code snippet would be great if you decide to help me with this issue.
Thanks in advance.
Algorithmen und Datenstrukturen in C#:
TechNet Wiki

Thank you for your reply. Unfortunately ListItem does not contain a definition for the Fields method.
Algorithmen und Datenstrukturen in C#:
TechNet Wiki
You need to use the Microsoft.SharePoint class library and then use the sharepoint version of all the list objects you are using. See below.
//Get connection
ClientContext context = new ClientContext("URL");
Web site = context.Web;
context.Load(site);
context.ExecuteQuery();
//Get list collection
SPListCollection lists = context.Web.Lists;
context.Load(lists);
context.ExecuteQuery();
//Get specific list
SPList menu = lists.GetByTitle("menu");
CamlQuery camlQuery = new CamlQuery();
camlQuery.ViewXML = "<View/>";
SPListItemCollection dishes = menu.GetItems(camlQuery);
context.Load(menu);
context.Load(dishes);
context.ExecuteQuery();
//Iterate through all dishes
foreach(SPListItem dish in dishes)
Console.WriteLine("Dish: {0}:", dish.FieldValues["Name"]);
Console.WriteLine("Price: {0}:", dish.FieldValues["Price"]);
//Here I get my problem
SPFieldMultiLineText multilineField = dish.Fields.GetField("Ingredients") as SPFieldMultiLineText;
string ingredients = "";
if (multilineField != null)
ingredients = multilineField.GetFieldValueAsText(dish["Ingredients"]);
Console.WriteLine("Ingredients: {0}:", ingredients);}
I hope this helps
Alex

How to send plain text body in HTTP Post method ?

Hi Exeperts,
I have a scenario http post - ptoxy. Sender sending the data in http post in plain text body (only field values will be in the body).
how should i capture this plain text for receiver to map..
is any udf or xsl code ?
please guide me for achieving this requirement .
find the attachment for http post body value.
Regards
Ravi

Hi Mark,
Thanks for your reply,
Please share you have any udf for this .
can you explain me how should i map to target side.
what are the configuration should i done in communication channel level
Regards
Ravinder.s

Plain Text Attachments are delivered as inline through sendmail in Solaris

We are trying to send a plain text attachment through sendmail, but it is delivered as a inline message with all the headers in the body of the mail.
I am using the following format for the mail header
dataFile << "\nContent-Type: MULTIPART/mixed; ";
dataFile << "BOUNDARY=Shrewdness_of_Apes_263_000"<<endl;
dataFile << "--Shrewdness_of_Apes_263_000"<<endl;
dataFile << "Content-Type: TEXT/plain; charset=us-ascii"<<endl;
dataFile << "Content-MD5: y0krffm1wXDXyHUnlA7/Ow=="<<endl;
dataFile << "--Shrewdness_of_Apes_263_000"<<endl;
dataFile << " Content-Type: TEXT/plain;";
dataFile << " name=\"Report.txt\";charset = us-ascii" << endl;
dataFile << " Content-Description:Report.txt"<<endl;
dataFile << "Content-MD5: PzHeltJOzVrvtnvTQ9aofQ=="<<endl;
dataFile << "\n--Shrewdness_of_Apes_263_000--"<<endl;
Please tell whether the format is correct for Solaris 10.
This is correctly working in Solaris 8.

The information in your link is wrong.
There are several options for doing what you want. The easiest, and best, option is to compress the attachments as zip files before attaching them. Then they'll always be displayed as file attachments. The recipient will have to unzip them, obviously. Some enterprise mail gateways may balk at zip attachments, because they're often used to distribute Windows malware.
Another good option is to use a third-party mail client that better suits your needs, such as Thunderbird.
You could try the third-party application called "Attachment Tamer," which purports to change the behavior of Mail. I have no experience with it.
Finally, you can try the hack suggested in this thread:
Problems with sending email attachments...: Apple Support Communities
I have no idea whether it works and I don't recommend it.

HOW TO SAVE A TEXT FILE ON AL11

HOW CAN WE SAVE A TEXT FILE ON THE APPLICATION SERVER AL11 WHICH IS ON THE DESKTOP OR ANY DRIVES.
CAN SOME ONE GIVE ME THE STEP BY STEP PRCEDURE
REWARDS IF USEFUL

Hi,
Use Tcode CG3Z to upload files to application server and use tocde CG3Y to download file to your desktop.
Reward points if helpful.
Regards,
CS.

Rejection Applicant: How to add plain text to the mail E Mail Letter?

Dear All:
I'm working with a ECC6 version.
In transaction PB60, when we do the candidate rejection activity, the E Mail letter generates a mail with empty body text, and an attachment with the letter in PDF format. The letter is OK, but I would like to know how to add some plain text to this E Mail letter. An empty mail is not a good practise.
I searched across the forums and SAP documentation, but I could not find any clue.
I would appreciate any help regarding to this matter.
Best regards
Jordi

Here you go ! ( you need to create Text in t-code SO10 for ID = PAML " )
Two Default texts under ID = PAML :
*MAIL-APP-INTERVIEW     *EN     TEXT     PAML     SYSTEM
MAIL-APPLICANT     EN     TEXT     PAML     SYSTEM
Personnel Management->Applicant Activities->Mail Connection ->Create standard texts for mail connection
Create standard texts for mail connection
In this step you can create the standard texts to be used in mails.
Example
u2022     Request for return of applicant file
u2022     Notification of date of job interview
Requirements
u2022     You should have assigned a standard text to the activity.
u2022     You should also have set the variables which are to be used.
u2022     Finally, you should also have made the settings for supplying the variable with values.
Standard settings
The standard system contains two examples of standard texts. You can use these examples as references to help you create your own standard texts. The standard texts have the following names:
u2022     MAIL-APPLICANT (note on an applicant activity)
u2022     MAIL-APP-INTERVIEW (note on appointment for interview)
Please note that the standard texts are stored under text ID PAML.
Activities
Now create the standard texts you require under text ID PAML.
Further notes
Every mail is made up of a heading and contents. In the first line of the standard text you enter the heading of the mail and from the second line on, the contents.
The standard default settings for style and layout are used for mails.
The SAP System treats standard texts as application data. This is why there is no automatic connection to the transport system. If you want to copy texts from one client to another within the same system, please use the functions of the transaction to create the texts. If you want to send the texts to a different system, please enter the transport manually as follows:
PgmID   Obj     Objectname
R3TR    TEXT   TEXT,XYZ,PAML,E
                 |    |   |   --- Language (e.g. E for English)
                 |    |   -
Text ID (e.g. PAML for standard mails)
                 |    -
Text name (probably not XYZ)
Text object (TEXT ist fixed)
Good luck
Saquib Khan

How to set plain-text for outgoing messages?

I just upgraded from a Pre "minus" to a Pre 2 with WebOS 2.1 . I now have mail recipients complaining that my messages are in HTML. How to I revert to plain-text for sending messages?
Post relates to: Pre p100eww (Sprint)

Hi jason ,
For setting Heder text for your ALV table
ip_confing type ref to CL_SALV_WD_CONFIG_TABLE.
"set alv table header
ip_config->if_salv_wd_table_settings~r_header->set_text( 'Test ALV Header functionality' ).
first you have to hide the DDIC text and then try to set your own text .
"modify columns
LOOP AT lt_columns INTO ls_column.
    lr_column = ls_column-r_column.
    CASE ls_column-id.
      WHEN 'MANDT'.
        "hide this field
        lr_column->set_visible( cl_wd_abstr_table_column=>e_visible-none ).
       WHEN 'SEQNR'.
        "set header to different string
        lr_column->r_header->set_ddic_binding_field( if_salv_wd_c_column_settings=>ddic_bind_none )." use this line to hide ddic text
        lr_column->r_header->set_text( 'Position' ).
    endcase.
endloop.
Regards
Chinnaiya P

How to save formatted text in Transparent or cluster table using WDA

Hi All,
From WDA application I want to save formatted text in Transparent or cluster table.
What Datatypes/Data elements should take in Tables? Format should remain as it is.
How can I achieve above requirement. Please guide step by step.
Thanks in advance.
Note : I will use FormattedText UI element in the view
BR
CW

Hi,
I am not sure may you can try XSTRING also..
And you can check this for special char.
http://www.google.co.in/url?q=http://forums.sdn.sap.com/thread.jspa%3FthreadID%3D1342827&sa=U&ei=ynTkTZDvNsbsrAepvIWsBg&ved=0CBYQFjAA&usg=AFQjCNEHLu2lPsOLP0m78AqWKjZPvBB8Yw
Cheers,
Kris.

Save plain text file

How can I create a text file that is not in a UTF format and is just plain text?
This is the code I have but it creates the text in UTF8
Private Sub PlacefileUpdate_Tick(sender As Object, e As EventArgs) Handles PlacefileUpdate.Tick
Dim FILE_NAME As String = "X:\Data\polygon_placefile.txt"
My.Computer.FileSystem.WriteAllText(FILE_NAME, "", False)
If Verticies.Items.Count = 8 Then
Dim i As Integer
Dim aryText(14) As String
aryText(0) = "Title: Polygon"
aryText(1) = "Threshold: 999"
aryText(2) = "RefreshSeconds: 1"
aryText(3) = ""
aryText(4) = "Color: 255 255 255"
aryText(5) = "Line: 3, 0, Polygon"
aryText(6) = Verticies.Items(0)
aryText(7) = Verticies.Items(1)
aryText(8) = Verticies.Items(2)
aryText(9) = Verticies.Items(3)
aryText(10) = Verticies.Items(4)
aryText(11) = Verticies.Items(5)
aryText(12) = Verticies.Items(6)
aryText(13) = Verticies.Items(7)
aryText(14) = "End:"
Dim objWriter As New System.IO.StreamWriter(FILE_NAME, True)
For i = 0 To 14
objWriter.WriteLine(aryText(i))
Next
objWriter.Close()
End If
End Sub
Regards, Carter Humphreys

ASCIIEncoding Class - From link in previous post.
Maybe you are viewing the text with an application not set for ASCII encoding.
La vida loca
Notepad. All I know is that it that the current code I have creating a UTF8 format and what I have that works is ASCII encoding.
Regards, Carter Humphreys

How to add plain text editor in OA Framework page

Hi,
I have created a page in which i have added rich text editor item but in place of rich text editor we only want to use plain text editor in page with no extra features.
How can we use plain text editor in page in place of rich one.Is there any property i need to change or i need to add any other item??
I have tried message style text by increasing its length and height in visual properties but there comes a vertical bar which i do not want.
Thanks for help in advance!
Prateek
Message was edited by:
Prateek

Try to see if OARawTextBean helps
Thanks
Tapash

How to save the text from text area back to a text file?

Hi all,
Now I am doing a small panel which containts a JTextArea, this TextArea will read the content from a text file, then display the content of the text file on the TextArea itself.
My idea is, allow the user to modify the content in the textarea (I set it Editable=true;), then save it. After the user press the save button, the content in the text file will be updated accordng to the user;s modification on TextArea.
I had done the displaying part by using JavaI/O (BufferReader), now any expert here know how to update the TextArea content back to the text file itself? PLease teach me, THANKS !!!

NOw I had manage to clear out the error, but now the problem is when I click on the 'save' button, this function clear out the entire text file for me !!!
The code are as below:
       if(e.getSource()== vButtons[0])
          try{
           String str;
           String Ky = tArea.getText();
           BufferedWriter buffWrite=null;
           BufferedWriter in1 = new BufferedWriter(new FileWriter("Keyword.txt"));
                    buffWrite.write(Ky);
                buffWrite.flush();
                    buffWrite.close();
                in1.close();
          catch (IOException ex) {
          ex.printStackTrace();
        if(e.getSource()== vButtons[1])
              new panel();
              dispose();
         if(e.getSource()== vButtons[2])
            System.exit(0);
    }     Please tell me how to save the TextArea to the text file, THANKS !!!

HT4528 How do save a text sound to a ringtone on my iPhone 4

How do I save a text sound to my phone?

Is this a custome texttone that you created?
Could be possible that you can only use it for text message and not as a ringtone.

How to save plain text attachments

Similar Messages

Maybe you are looking for