How to save post roll length

I am using a post roll in Premiere Pro CS 5.0. A post roll is similar to movie credits that scroll vertically at the end of a movie. I am doing something similar with my videos. My problem is that each time I use it, I have to size it to a certain number of frames. Is there a way to set that or to save it to disc, so it will be the same each time?

Put it in a separate timeline and export it out as a finished video file to be used in later projects.

Similar Messages

I need to erase the contents of my phone and restore to factory settings. Does anybody know how to save your texts so you don't lose them? Can I back those up to iCloud? My phone was very likely hacked (Apple's advice was to call the police!)

"I need to erase the contents of my phone and restore to factory settings. Does anybody know how to save your texts so you don't lose them? Can I back those up to iCloud? My phone was very likely hacked (Apple's advice was to call the police!)"
That was all I could put in the initial "box." Then it brought me to this page with instructions on how to write a good sentence.
Proceeding ...
After going back and forth between Apple, AT&T and the police (all telling me to go to the other two) I took AT&Ts suggestion and got a new number. One tech warned against doing a backup, especially on my Mac, saying if my phone had been hacked then whatever bug was there would then invade my computer. But nobody knows how to determine if the phone has been hacked or a virus was planted there. Unfortunately I know who would have reason to do such a thing and all I can say is that he is at the top technologically and could easily do it. Almost impossible to prove, however.
So I need to preserve my text messages and my emails as well. I backed up my photos to that Microsoft product (One-Drive) and it froze (Surprise, Surprise) with four short videos to go, and no way of stopping that (when I tried it crashed repeatedly) so I'm in crisis mode here.
Help ...
Running 8.0 on 5S
Thanks!

Betty I don't know if you fixed your hacking problem but I feel your pain. I've seen some strange things going on between my iMac and my iPhone and Apple has told me the same thing, call the police which I have done. The hackers have stole 500.00 out of my checking account have access to every internet account I use and no matter how often I change the password their right back on the account. I closed my FB account 3 times only to have someone reopen it. Right now I've got a link in my reading list (Safari) that if I click on it, it allows me to log onto my FB account anonymously.
I've seen a green folder come out of no where while I was trying to delete my passwords out of keychain when that green folder was put into the key chain I was immediately locked out. I than went into system preferences to try to make changes to my security settings, when I clicked on the icon it wouldn't open. I've seen log files of automator receiving commands and sending out my personal information thats on my computer.
I have a legitamate program called iExplorer that allows you to look at the contents of your iPhone back ups and saw a transaction someone made at the Apple store for some full length movies, some albums, ibooks and other apps but when I called the iTunes store and they said none of those items were showing up on my account. If their not on my account how can they be on my iPhone 6? One day someone was using my gmail account and unknowingly used google maps to search for an Italian restaurant, than a Mexican restaurant than a coffee shop and their search showed up on my iPhone but I didn't have my gmail account installed on my iPhone 6. Using my computer I logged onto my gmail account and looked at the maps history and sure enough there were the searches when I'd hover my curser over the link it gave me the longitude and latitude of the where the hacker was when he was using google maps. I know whoever reads this thinks Im crazy but I've documented everything and can prove the things that I have mentioned in this post actually happened.
One day I had my laptop (pc) and my iMac next to each other as I was using both. when I clicked on airport it showed that my laptop and my iMac had made a connection and were actually communicating with each other. I know I didn't do it I don't know how. The iMac was logged into my iCloud account while my laptop wasn't. I have formatted my iPhone at least a dozen times, Apple and an Apple retailer have formatted my hard drive not to mention the numerous times I have formatted it but the hackers keep getting on my devices. Im formatting my lap top at this very second because during the course of the night I left the ethernet cable plugged into it and they locked me out of my c: drive, and configured the system so I can't download any updates from Microsoft, overtime I type in www.microsoft.com it changes to ww38.microsoft.com which takes me to a blank page. I right clicked on the page I was redirected to and read the java script and couldn't believe that someone had actually configured Internet Explorer to redirect me to a blank page when I tried to go to Microsoft. Apples answer to all this is there was nothing wrong with my iPhone or my iMac and if I thought there was a problem to call the police which I have done.
Theres no doubt the hackers are reading this while I type it or will read it and I simply don't care anymore. I no longer email anyone, don't use my iCloud account and have taken precautions to protect my credit but if I ever find out who has invaded my privacy to this extreme the police are going to want to talk to me because Im going to hurt them like they've never been hurt before

How to save pdf file in database

Dear All,
my application is forms 6i and database is 8i,requirement is that how to save pdf file in database and users can view through forms

I'll apologize up front for the length of this post. I have a few database procedures I created that write a file to a BLOB column in a table as well as retrieve the BLOB from the column after it stored there. I have successfully stored many different types of binary file to the database using these procedures - including PDF files. I have not used these procedures in a Form so I can confirm that they will work, but theoretically they should work. I'm including the code for each procedure in this posting - hence the apology for the long post! :-)
Also, since these procedures reside on the database you will need to use Forms TEXT_IO built-in package to write your file to the server before you can use these procedures to store and retrieve the file from the database.
These procedures reads and writes a binary file to a table called "LOB_TABLE." You will need to modify the procedure to write to your table.
-- Author : Craig J. Butts (CJB)
-- Name : load_file_to_blob.sql
-- : This procedure uses an Oracle Directory called "IN_FILE_LOC". If you
-- already have a directory defined in the database or would prefer to use
-- a different Directory name, make sure you modify line 21 to reflect the
-- new Directory name.
-- ==================================================================================
-- History
-- DATE WHO DESCRIPTION
-- 12/11/07 CJB Created.
CREATE OR REPLACE PROCEDURE load_file_to_blob (p_filename IN VARCHAR2) IS
 out_blob BLOB;
 in_file BFILE;
 blob_length INTEGER;
 vErrMsg VARCHAR2(2000);
BEGIN
 -- set the in_file
 in_file := BFILENAME('IN_FILE_LOC',p_filename);
 -- Get the size of the file
 dbms_lob.fileopen(in_file, dbms_lob.file_readonly);
 blob_length := dbms_lob.getlength(in_file);
 dbms_lob.fileclose(in_file);
 -- Insert a new Record into the tabel containing the
 -- filename specified in P_FILENAME and a LOB_LOCATOR.
 -- Return the LOB_LOCATOR and assign it to out_blob.
 INSERT INTO lob_table (filename, blobdata)
 VALUES (p_filename, EMPTY_BLOB())
 RETURNING blobdata INTO out_blob;
 -- Load the file into the database as a blob.
 dbms_lob.open(in_file, dbms_lob.lob_readonly);
 dbms_lob.open(out_blob, dbms_lob.lob_readwrite);
 dbms_lob.loadfromfile(out_blob, in_file, blob_length);
 -- Close handles to blob and file
 dbms_lob.close(out_blob);
 dbms_lob.close(in_file);
 commit;
 -- Confirm insert by querying the database
 -- for Lob Length information and output results
 blob_length := 0;
 BEGIN
 SELECT dbms_lob.getlength(blobdata) into blob_length
 FROM lob_table
 WHERE filename = p_filename;
 EXCEPTION WHEN OTHERS THEN
 vErrMsg := 'No data Found';
 END;
 vErrMsg := 'Successfully inserted BLOB '''||p_filename||''' of size '||blob_length||' bytes.';
 dbms_output.put_line(vErrMsg);
END;
-- Author : Craig J. Butts (CJB)
-- Name : write_blob_to_file.sql
-- Descrip : This procedure takes a BLOB object from a database table and writes it
-- to the file system
-- ==================================================================================
-- History
-- DATE WHO DESCRIPTION
-- 12/11/07 CJB Created.
CREATE OR REPLACE PROCEDURE write_blob_to_file ( p_filename IN VARCHAR2 ) IS
 v_blob BLOB;
 blob_length INTEGER;
 out_file UTL_FILE.FILE_TYPE;
 v_buffer RAW(32767);
 chunk_size BINARY_INTEGER := 32767;
 blob_position INTEGER := 1;
 vErrMsg VARCHAR2(2000);
BEGIN
 -- Retrieve the BLOB for reading
 BEGIN
 SELECT blobdata
 INTO v_blob
 FROM lob_table
 WHERE filename = p_filename;
 EXCEPTION WHEN OTHERS THEN
 vErrMsg := 'No data found';
 END;
 -- Retrieve the SIZE of the BLOB
 blob_length := DBMS_LOB.GETLENGTH(v_blob);
 -- Open a handle to the location where you are going to write the blob
 -- Note: The 'WB' parameter means "Write in Byte Mode" and is only
 -- available in the UTL_FILE pkg with Oracle 10g or later.
 -- USE 'W' instead for pre Oracle 10q databases.
 out_file := UTL_FILE.FOPEN('OUT_FILE_LOC',p_filename, 'wb', chunk_size);
 -- Write the BLOB to the file in chunks
 WHILE blob_position <= blob_length LOOP
 IF ( ( blob_position + chunk_size - 1 ) > blob_length ) THEN
 chunk_size := blob_length - blob_position + 1;
 END IF;
 dbms_lob.read(v_blob, chunk_size, blob_position, v_buffer );
 UTL_FILE.put_raw ( out_file, v_buffer, TRUE);
 blob_position := blob_position + chunk_size;
 END LOOP;
END;Hope this helps.
Craig...
-- If my response or the response of another is helpful or answers your question please mark the response accordingly. Thanks!

How to save content of a whole swing page

Hi everyone ..
can any of u tell me ,how to save contents of a java swing page in a single file with all components viz . textfield,textarea,JTable,JPanel etc .. with their respective formatting ie.e Font,Color etc ..
Plz let me know it soon .. its very urgent ..
Can I save it as Screenshot or Jpeg Image .. or how to go about it .
Mohit

Sure: see below!
WARNING: this code will not compile as is because it uses some other classes from my personal code library (FileUtil & StringUtil). The particular methods of those classes which are used below are trivial methods that anyone can write, which is is why I have not posted them as well. So, to get the code below to compile, you can
a) write your own versions of these classes or
b) simply add the necessary methods to this class or
c) simply comment out their usage (in the case of StringUtil, which is just used for arg checking)
But if you still want me to post them, then I can post the relevant fragments of those classes.
import java.awt.*;
import java.awt.event.*;
import java.awt.image.*;
import java.io.*;
import javax.imageio.*;
import javax.swing.*;
import bb.io.FileUtil;
import bb.util.StringUtil;
* Class which supports taking screen shots of the entire desktop, AWT Components, or Swing JComponents.
* This functionality is implemented in a series of <code>take</code> methods, each of which returns a BufferedImage.
* This class also offers convenience <code>write</code> methods for storing BufferedImages to files.
* 
* The images taken by this class should be the precise images seen on the screen.
* However, the images written to files may deviate from the originals.
* One obvious cause is limitations of the chosen file format (especially with lossy formats like jpeg).
* A subtle issue can occur, however, even when using lossless formats like png:
* if the file is subsequently opened by another application,
* that application may rescale the image, which can often cause visible artifacts.
* <blockquote>
* To see this last problem on Windows XP,
* call {@link #take()} which returns an image of the entire desktop and write it to a file,
* and then open the file with XP's default graphics file viewer ("Windows Picture And Fax Viewer").
* This program shrinks the desktop image in order to fit it inside the program's window,
* and rescaling artifacts are readily seen, especially if the desktop image has any kind of text in it.
* If "Windows Picture And Fax Viewer" instead cropped the image or had a scroll pane, then this should not happen.
* </blockquote>
* 
* Acknowledgement: this class was inspired by the program
* <a href="http://www.discoverteenergy.com/files/ScreenImage.java">ScreenImage</a>.
* Differences from the above program:
* <ol>
* <li>this class uses {@link BufferedImage#TYPE_INT_ARGB} instead of {@link BufferedImage#TYPE_INT_RGB} in order to preserve alpha</li>
* <li>this class's {@link #formatNameDefault default image file format} is PNG instead of JPEG</li>
* <li>this class's <code>take</code> methods simply take snapshots and never have the side effect of writing image files</li>
* <li>this class added a version of <code>take</code> which can get a snapshot of a region of a Component</li>
* <li>
* when taking a snapshot of a region of a Component or JComponent,
* the Rectangle that specifies the region always has coordinates relative to the origin of the item
* </li>
* </ol>
* See also:
* <a href="http://forum.java.sun.com/thread.jspa?forumID=57&threadID=597936">forum discussion #1 on screen shots</a>
* <a href="http://forum.java.sun.com/thread.jspa?forumID=256&threadID=529933">forum discussion #2 on screen shots</a>
* <a href="http://forum.java.sun.com/thread.jspa?forumID=57&threadID=622393">forum discussion #3 on screen shots</a>.
* 
* It might appear that this class is multithread safe
* because it is immutable (both its immediate state, as well as the deep state of its fields).
* However, typical Java gui code is not multithread safe, in particular, once a component has been realized
* it should only be accessed by the event dispatch thread
* (see <a href="http://java.sun.com/developer/JDCTechTips/2003/tt1208.html#1">Multithreading In Swing</a>
* and <a href="http://java.sun.com/developer/JDCTechTips/2004/tt0611.html#1">More Multithreading In Swing</a>).
* So, in order to enforce that requirement, all methods of this class which deal with components
* require the calling thread to be the event dispatch thread.
* See the javadocs of each method for its thread requirements.
* 
* @author bbatman
public class ScreenShot {
 // -------------------- constants --------------------
 * Defines the image type for the BufferedImages that will create when taking snapshots.
 * The current value is {@link BufferedImage#TYPE_INT_ARGB}, which was chosen because
 * <ol>
 * <li>the 'A' in its name means that it preserves any alpha in the image (cannot use the "non-A" types)</li>
 * <li>the "_INT" types are the fastest types (the "BYTE" types are slower)
 * </ol>
 * @see <a href="http://forum.java.sun.com/thread.jspa?threadID=709109&tstart=0">this forum posting</a>
 private static final int imageType = BufferedImage.TYPE_INT_ARGB;
 * Default value for the graphics file format that will be written by this class.
 * The current value is "png" because the PNG format is by far the best lossless format currently available.
 * Furthermore, java cannot write to GIF anyways (only read).
 * 
 * @see <a href="http://www.w3.org/TR/PNG/">Portable Network Graphics (PNG) Specification (Second Edition)</a>
 * @see <a href="http://www.w3.org/QA/Tips/png-gif">GIF or PNG</a>
 * @see <a href="http://www.libpng.org/pub/png/">PNG Home Site</a>
 public static final String formatNameDefault = "png";
 // -------------------- take --------------------
 // desktop versions:
 * Takes a screen shot of the entire desktop.
 * 
 * Any thread may call this method.
 * 
 * @return a BufferedImage representing the entire screen
 * @throws AWTException if the platform configuration does not allow low-level input control. This exception is always thrown when GraphicsEnvironment.isHeadless() returns true
 * @throws SecurityException if createRobot permission is not granted
 public static BufferedImage take() throws AWTException, SecurityException {
 Dimension d = Toolkit.getDefaultToolkit().getScreenSize();
 Rectangle region = new Rectangle(0, 0, d.width, d.height);
 return take(region);
 * Takes a screen shot of the specified region of the desktop.
 * 
 * Any thread may call this method.
 * 
 * @param region the Rectangle within the screen that will be captured
 * @return a BufferedImage representing the specified region within the screen
 * @throws IllegalArgumentException if region == null; region's width and height are not greater than zero
 * @throws AWTException if the platform configuration does not allow low-level input control. This exception is always thrown when GraphicsEnvironment.isHeadless() returns true
 * @throws SecurityException if createRobot permission is not granted
 public static BufferedImage take(Rectangle region) throws IllegalArgumentException, AWTException, SecurityException {
 if (region == null) throw new IllegalArgumentException("region == null");
 return new Robot().createScreenCapture( region ); // altho not currently mentioned in its javadocs, if you look at its source code, the Robot class is synchronized so it must be multithread safe, which is why any thread should be able to call this method
 // AWT Component versions:
 * Takes a screen shot of that part of the desktop whose area is where component lies.
 * Any other gui elements in this area, including ones which may lie on top of component,
 * will be included, since the result always reflects the current desktop view.
 * 
 * Only {@link EventQueue}'s {@link EventQueue#isDispatchThread dispatch thread} may call this method.
 * 
 * @param component AWT Component to take a screen shot of
 * @return a BufferedImage representing component
 * @throws IllegalArgumentException if component == null; component's width and height are not greater than zero
 * @throws IllegalStateException if calling thread is not EventQueue's dispatch thread
 * @throws AWTException if the platform configuration does not allow low-level input control. This exception is always thrown when GraphicsEnvironment.isHeadless() returns true
 * @throws SecurityException if createRobot permission is not granted
 public static BufferedImage take(Component component) throws IllegalArgumentException, IllegalStateException, AWTException, SecurityException {
 if (component == null) throw new IllegalArgumentException("component == null");
 if (!EventQueue.isDispatchThread()) throw new IllegalStateException("calling thread (" + Thread.currentThread().toString() + ") is not EventQueue's dispatch thread");
 Rectangle region = component.getBounds();
 region.x = 0; // CRITICAL: this and the next line are what make region relative to component
 region.y = 0;
 return take(component, region);
 * Takes a screen shot of that part of the desktop whose area is the region relative to where component lies.
 * Any other gui elements in this area, including ones which may lie on top of component,
 * will be included, since the result always reflects the current desktop view.
 * 
 * Only {@link EventQueue}'s {@link EventQueue#isDispatchThread dispatch thread} may call this method.
 * 
 * @param component AWT Component to take a screen shot of
 * @param region the Rectangle relative to component that will be captured
 * @return a BufferedImage representing component
 * @throws IllegalArgumentException if component == null; component's width and height are not greater than zero; region == null
 * @throws IllegalStateException if calling thread is not EventQueue's dispatch thread
 * @throws AWTException if the platform configuration does not allow low-level input control. This exception is always thrown when GraphicsEnvironment.isHeadless() returns true
 * @throws SecurityException if createRobot permission is not granted
 public static BufferedImage take(Component component, Rectangle region) throws IllegalArgumentException, IllegalStateException, AWTException, SecurityException {
 if (component == null) throw new IllegalArgumentException("component == null");
 if (region == null) throw new IllegalArgumentException("region == null");
 if (!EventQueue.isDispatchThread()) throw new IllegalStateException("calling thread (" + Thread.currentThread().toString() + ") is not EventQueue's dispatch thread");
 Point p = new Point(0, 0);
 SwingUtilities.convertPointToScreen(p, component);
 region.x += p.x;
 region.y += p.y;
 return take(region);
 // Swing JComponent versions:
 * Takes a screen shot of just jcomponent
 * (no other gui elements will be present in the result).
 * 
 * Only {@link EventQueue}'s {@link EventQueue#isDispatchThread dispatch thread} may call this method.
 * 
 * @param jcomponent Swing JComponent to take a screen shot of
 * @return a BufferedImage representing jcomponent
 * @throws IllegalArgumentException if jcomponent == null
 * @throws IllegalStateException if calling thread is not EventQueue's dispatch thread
 public static BufferedImage take(JComponent jcomponent) throws IllegalArgumentException, IllegalStateException {
 if (jcomponent == null) throw new IllegalArgumentException("jcomponent == null");
 if (!EventQueue.isDispatchThread()) throw new IllegalStateException("calling thread (" + Thread.currentThread().toString() + ") is not EventQueue's dispatch thread");
 Dimension d = jcomponent.getSize();
 Rectangle region = new Rectangle(0, 0, d.width, d.height);
 return take(jcomponent, region);
 * Takes a screen shot of just the specified region of jcomponent
 * (no other gui elements will be present in the result).
 * 
 * Only {@link EventQueue}'s {@link EventQueue#isDispatchThread dispatch thread} may call this method.
 * 
 * @param jcomponent Swing JComponent to take a screen shot of
 * @param region the Rectangle relative to jcomponent that will be captured
 * @return a BufferedImage representing the region within jcomponent
 * @throws IllegalArgumentException if jcomponent == null; region == null
 * @throws IllegalStateException if calling thread is not EventQueue's dispatch thread
 public static BufferedImage take(JComponent jcomponent, Rectangle region) throws IllegalArgumentException, IllegalStateException {
 if (jcomponent == null) throw new IllegalArgumentException("jcomponent == null");
 if (region == null) throw new IllegalArgumentException("region == null");
 if (!EventQueue.isDispatchThread()) throw new IllegalStateException("calling thread (" + Thread.currentThread().toString() + ") is not EventQueue's dispatch thread");
 boolean opaquenessOriginal = jcomponent.isOpaque();
 Graphics2D g2d = null;
 try {
 jcomponent.setOpaque( true );
 BufferedImage image = new BufferedImage(region.width, region.height, imageType);
 g2d = image.createGraphics();
 g2d.translate(-region.x, -region.y) ; // CRITICAL: this and the next line are what make region relative to component
 g2d.setClip( region );
 jcomponent.paint( g2d );
 return image;
 finally {
 jcomponent.setOpaque( opaquenessOriginal );
 if (g2d != null) g2d.dispose();
 // -------------------- write --------------------
 * Writes image to a newly created File named fileName.
 * The graphics format will either be the extension found in fileName
 * or else {@link #formatNameDefault} if no extension exists.
 * 
 * Any thread may call this method.
 * 
 * @param image the BufferedImage to be written
 * @param fileName name of the File that will write image to
 * @throws IllegalArgumentException if image == null; fileName is blank
 * @throws IOException if an I/O problem occurs
 public static void write(BufferedImage image, String fileName) throws IllegalArgumentException, IOException {
 if (image == null) throw new IllegalArgumentException("image == null");
 if (StringUtil.isBlank(fileName)) throw new IllegalArgumentException("fileName is blank");
 File file = new File(fileName);
 String formatName = FileUtil.getExtension(file);
 if (formatName.length() == 0) formatName = formatNameDefault;
 write(image, formatName, file);
 * Writes image to file in the format specified by formatName.
 * 
 * Any thread may call this method.
 * 
 * @param image the BufferedImage to be written
 * @param formatName the graphics file format (e.g. "pnj", "jpeg", etc);
 * must be in the same set of values supported by the formatName arg of {@link ImageIO#write(RenderedImage, String, File)}
 * @param file the File that will write image to
 * @throws IllegalArgumentException if image == null; type is blank; file == null
 * @throws IOException if an I/O problem occurs
 public static void write(BufferedImage image, String formatName, File file) throws IllegalArgumentException, IOException {
 if (image == null) throw new IllegalArgumentException("image == null");
 if (StringUtil.isBlank(formatName)) throw new IllegalArgumentException("formatName is blank");
 if (file == null) throw new IllegalArgumentException("file == null");
 ImageIO.write(image, formatName, file);
 // -------------------- Test (inner class) --------------------
 * An inner class that consists solely of test code for the parent class.
 * 
 * Putting all the test code in this inner class (rather than a <code>main</code> method of the parent class) has the following benefits:
 * <ol>
 * <li>test code is cleanly separated from working code</li>
 * <li>any <code>main</code> method in the parent class is now reserved for a true program entry point</li>
 * <li>test code may be easily excluded from the shipping product by removing all the Test class files (e.g. on Windoze, delete all files that end with <code>$Test.class</code>)</li>
 * </ol>
 * Putting all the test code in this inner class (rather than a shadow external class) has the following benefits:
 * <ol>
 * <li>non-public members may be accessed</li>
 * <li>the test code lives very close to (so is easy to find) yet is distinct from the working code</li>
 * <li>there is no need to set up a test package structure</li>
 * </ol>
 public static class Test {
 public static void main(String[] args) throws Exception {
 Gui gui = new Gui();
 EventQueue.invokeLater( gui.getBuilder() );
 new Timer(1000, gui.getTimerActionListener()).start();
 private static class Gui {
 private Frame frame;
 private TextField textField;
 private JFrame jframe;
 private JLabel jlabel;
 private JPanel jpanel;
 private int count = 0;
 private Runnable getBuilder() {
 return new Runnable() {
 public void run() {
 System.out.println("Creating a Frame with AWT widgets inside...");
 frame = new Frame("ScreenShot.Test.main Frame");
 textField = new TextField();
 textField.setText( "Waiting for the screen shot process to automatically start..." );
 frame.add(textField);
 frame.pack();
 frame.setLocationRelativeTo(null); // null will center it in the middle of the screen
 frame.setVisible(true);
 System.out.println("Creating a JFrame with Swing widgets inside...");
 jframe = new JFrame("ScreenShot.Test.main JFrame");
 jlabel = new JLabel(
 "<html>" +
 "To be, or not to be: that is the question:" + " " +
 "Whether 'tis nobler in the mind to suffer" + " " +
 "The slings and arrows of outrageous fortune," + " " +
 "Or to take arms against a sea of troubles," + " " +
 "And by opposing end them?" + " " +
 "To die: to sleep; No more;" + " " +
 "and by a sleep to say we end" + " " +
 "The heart-ache and the thousand natural shocks" + " " +
 "That flesh is heir to," + " " +
 "'tis a consummation Devoutly to be wish'd." + " " +
 "</html>"
 jpanel = new JPanel();
 jpanel.setBorder( BorderFactory.createEmptyBorder(20, 20, 20, 20) );
 jpanel.add(jlabel);
 jframe.getContentPane().add(jpanel);
 jframe.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
 jframe.pack();
 Point p = frame.getLocation();
 p.translate(0, frame.getSize().height + 10);
 jframe.setLocation(p);
 jframe.setVisible(true);
 private ActionListener getTimerActionListener() {
 return new ActionListener() {
 public void actionPerformed(ActionEvent evt) {
 try {
 switch (count++) {
 case 0:
 displayMessage("Taking a screen shot of the entire desktop...");
 ScreenShot.write( ScreenShot.take(), "desktop.png" );
 break;
 case 1:
 displayMessage("Taking a screen shot of the central rectangle of the desktop...");
 Dimension d = Toolkit.getDefaultToolkit().getScreenSize();
 Rectangle region = getCenteredRectangle(d);
 ScreenShot.write( ScreenShot.take(region), "desktopCenteredRectangle.png" );
 break;
 case 2:
 displayMessage("Taking a screen shot of the TextField...");
 ScreenShot.write( ScreenShot.take(textField), "textField.png" );
 break;
 case 3:
 displayMessage("Taking a screen shot of the central rectangle of the TextField...");
 d = textField.getSize();
 region = getCenteredRectangle(d);
 ScreenShot.write( ScreenShot.take(textField, region), "textFieldCenteredRectangle.png" );
 break;
 case 4:
 displayMessage("Taking a screen shot of the JLabel...");
 ScreenShot.write( ScreenShot.take(jlabel), "jlabel.png" );
 break;
 case 5:
 displayMessage("Taking a screen shot of the central rectangle of the JLabel...");
 d = jpanel.getSize();
 region = getCenteredRectangle(d);
 ScreenShot.write( ScreenShot.take(jpanel, region), "jpanelCenteredRectangle.png" );
 break;
 default:
 System.exit(0);
 break;
 catch (Throwable t) {
 t.printStackTrace(System.err);
 private void displayMessage(String text) {
 System.out.println(text);
 textField.setText(text);
 frame.pack();
 frame.invalidate();
 private Rectangle getCenteredRectangle(Dimension d) {
 int x = d.width / 4;
 int y = d.height / 4;
 int width = d.width / 2;
 int height = d.height / 2;
 return new Rectangle(x, y, width, height);
}

How to save report in PersonalCategory after creating it using java panel?

Hi,
Anybody knows How to save report in PersonalCategory after creating it using java panel?
I dont want to save it in public folder. I want to save report (webi) in user's personal category.
can anybody send me source code?
It will help me a lot.
Thanks in advance
Amol Mali

Hi teda,
i'm assuming that you have seen my post that i did successfuly save report in user's personal category.
Actually the report is created in webi java panel using RE SDK and is saved in Report Sample Folder then i'm saving it in user's personal category by following code
string query = "Select SI_PERSONAL_CATEGORIES From CI_INFOOBJECTS Where "
                     + "SI_INSTANCE=0 And SI_ID=" + reportID;
                InfoObjects infoObjects = infoStore.Query(query);
                InfoObject infoObject = infoObjects[1];
                Webi wreport = (Webi)infoObject;
                ObjectRelativeIDs personalIDs = wreport.PersonalCategories;
            /personalIDs.Add(Convert.ToInt32(categoryID));
               infoStore.Commit(infoObjects);
But the report is presents in the Folder also and in user's personal category also.
I dont want the report to be in the folder (Report Sample) if i saved it in user's personal category.
How can i do that?
any idea.
Please help me.
Thanks in advance
Amol Mali
Edited by: amol mali on Jan 9, 2009 7:55 PM

How can you post comments during signal aquisition?

How can you post comments during signal aquisition? For example, while acquiring your signal, you want to post a comment which the temperature reads at "30 seconds" from your relative start time (t=34 sec into recording)
I have the LE package where events, alarms, etc cannot be used. Are there other ways that the user can mark an "event" during recording?

Hey hkim,
If you know how long it will be before you want a message to pop up you can simply include a sequence structure and in the first sequence have a wait time of your desired length and have the message pop up and display in the second sequence frame.
Hope This Helps,
Doug B
Applications Engineer
National Instruments

How to save info in a meta-data of a jpg file?

hi, i need to know how to save info in a meta-data of a jpg file:
this is my code (doesn't work):
i get an exception,
javax.imageio.metadata.IIOInvalidTreeException: JPEGvariety and markerSequence nodes must be present
at com.sun.imageio.plugins.jpeg.JPEGMetadata.mergeNativeTree(JPEGMetadata.java:1088)
at com.sun.imageio.plugins.jpeg.JPEGMetadata.mergeTree(JPEGMetadata.java:1061)
at playaround.IIOMetaDataWriter.run(IIOMetaDataWriter.java:59)
at playaround.Main.main(Main.java:14)
package playaround;
import java.io.*;
import java.util.Iterator;
import java.util.Locale;
import javax.imageio.*;
import javax.imageio.metadata.IIOMetadata;
import javax.imageio.metadata.IIOMetadataNode;
import javax.imageio.plugins.jpeg.JPEGImageWriteParam;
import javax.imageio.stream.*;
import org.w3c.dom.*;
public class IIOMetaDataWriter {
public static void run(String[] args) throws IOException{
try {
File f = new File("C:/images.jpg");
ImageInputStream ios = ImageIO.createImageInputStream(f);
Iterator readers = ImageIO.getImageReaders(ios);
ImageReader reader = (ImageReader) readers.next();
reader.setInput(ImageIO.createImageInputStream(f));
ImageWriter writer = ImageIO.getImageWriter(reader);
writer.setOutput(ImageIO.createImageOutputStream(f));
JPEGImageWriteParam param = new JPEGImageWriteParam(Locale.getDefault());
IIOMetadata metaData = writer.getDefaultStreamMetadata(param);
String MetadataFormatName = metaData.getNativeMetadataFormatName();
IIOMetadataNode root = (IIOMetadataNode)metaData.getAsTree(MetadataFormatName);
IIOMetadataNode markerSequence = getChildNode(root, "markerSequence");
if (markerSequence == null) {
markerSequence = new IIOMetadataNode("JPEGvariety");
root.appendChild(markerSequence);
IIOMetadataNode jv = getChildNode(root, "JPEGvariety");
if (jv == null) {
jv = new IIOMetadataNode("JPEGvariety");
root.appendChild(jv);
IIOMetadataNode child = getChildNode(jv, "myNode");
if (child == null) {
child = new IIOMetadataNode("myNode");
jv.appendChild(child);
child.setAttribute("myAttName", "myAttValue");
metaData.mergeTree(MetadataFormatName, root);
catch (Throwable t){
t.printStackTrace();
protected static IIOMetadataNode getChildNode(Node n, String name) {
NodeList nodes = n.getChildNodes();
for (int i = 0; i < nodes.getLength(); i++) {
Node child = nodes.item(i);
if (name.equals(child.getNodeName())) {
return (IIOMetadataNode)child;
return null;
static void displayMetadata(Node node, int level) {
indent(level); // emit open tag
System.out.print("<" + node.getNodeName());
NamedNodeMap map = node.getAttributes();
if (map != null) { // print attribute values
int length = map.getLength();
for (int i = 0; i < length; i++) {
Node attr = map.item(i);
System.out.print(" " + attr.getNodeName() +
"=\"" + attr.getNodeValue() + "\"");
Node child = node.getFirstChild();
if (child != null) {
System.out.println(">"); // close current tag
while (child != null) { // emit child tags recursively
displayMetadata(child, level + 1);
child = child.getNextSibling();
indent(level); // emit close tag
System.out.println("</" + node.getNodeName() + ">");
} else {
System.out.println("/>");
static void indent(int level) {
for (int i = 0; i < level; i++) {
System.out.print(" ");
}

Hi,
Yes, you need store data to table, and fetch it when page is opened.
Simple way is create table with few columns and e.g. with CLOB column and then create form based on that table.
Then modify item types as you like, e.g. use HTML editor for CLOB column
Regards,
Jari

How to save pics from facebook in nokia lumia 625

I am using Nokia Lumia 625
please tell me how to save pics from Facebook
while using thanks

Sure it does;
Select (TAP) the post you like to save;
Then TAP AND HOLD to select the save option
Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem..
Attachments:
tap1.png ‏502 KB
tap2.png ‏284 KB

How to save a JPG in 256 colors?

I'm using Photoshop CS2.
1. How to save a JPG in 256 colors?
2. Is there a way to see an image properties?
-- I want to know if that image is in 256 color or not...

Mary Jo, since you are a newcomer, you may not yet understand that in any given Adobe forum, there are a whole bunch of conversations going on at the same time. Each one of these is about a certain "topic", described in the title and opening post. The discussion sometimes stays right on point, and sometimes veers off a bit, and there are often quick side-issues branching off from the main topic, but still related. Within limits, people here try to keep the discussion on a single general topic. For example, in this topic, the initial issue is whether there is a way, in Photoshop, to limit the number of colors in a JPEG image to 256; there were discussions about whether this could be done or not, and alternative programs that may be able to accomplish this, and a comparison of the file sizes for 256 bit images in different file types.
Your question, however, is not a logical outgrowth of the discussion. It's a perfectly good question, but it deserves its own new discussion topic. It's like a bunch of people have been sitting around a table discussing the merits of Canon vs. Nikon SLRs, and someone sits down at the table and, instead of joining the conversation, asks a completely unrelated question about point-and-shoot cameras, or camcorders.
It's off-topic here, and you should start a new topic. Make the title descriptive, such as "Why does a 8 megapixel image result in a 3 megabyte file on my computer?" (assuming that's what you want to ask -- just "M" doesn't tell me whether you are talking about MP or MB). In the initial post, provide a more detailed description of what you want to know. Tell us what camera and Photoshop version you are using, and how you encountered the issue. People will see that a new topic raises an issue they know something about and you will get a response -- probably a good answer, if you keep in the conversation.
[Edit: Trez hit "post" before I did. Trez-- I think she is using Photoshop, not Elements; she did say CS2.]

How to save a video file which uses the setCodecChain method on its video t

hi! i really need your help please. i got the Code for RotationEffect and i would like to know how to save it to a file instead of playing it simultaneously in a player:
Here is the code: Plz Help me!!! am doing my final year project
import java.awt.*;
import java.awt.event.*;
import javax.media.*;
import javax.media.control.TrackControl;
import javax.media.Format;
import javax.media.format.*;
* Sample program to test the RotationEffect.
public class TestEffect extends Frame implements ControllerListener {
Processor p;
Object waitSync = new Object();
boolean stateTransitionOK = true;
public TestEffect() {
 super("Test RotationEffect");
* Given a media locator, create a processor and use that processor
* as a player to playback the media.
* During the processor's Configured state, the RotationEffect is
* inserted into the video track.
* Much of the code is just standard code to present media in JMF.
public boolean open(MediaLocator ml) {
 try {
 p = Manager.createProcessor(ml);
 } catch (Exception e) {
 System.err.println("Failed to create a processor from the given url: " + e);
 return false;
 p.addControllerListener(this);
 // Put the Processor into configured state.
 p.configure();
 if (!waitForState(p.Configured)) {
 System.err.println("Failed to configure the processor.");
 return false;
 // So I can use it as a player.
 p.setContentDescriptor(null);
 // Obtain the track controls.
 TrackControl tc[] = p.getTrackControls();
 if (tc == null) {
 System.err.println("Failed to obtain track controls from the processor.");
 return false;
 // Search for the track control for the video track.
 TrackControl videoTrack = null;
 for (int i = 0; i < tc.length; i++) {
 if (tc.getFormat() instanceof VideoFormat) {
 videoTrack = tc[i];
 break;
 if (videoTrack == null) {
 System.err.println("The input media does not contain a video track.");
 return false;
 System.err.println("Video format: " + videoTrack.getFormat());
 // Instantiate and set the frame access codec to the data flow path.
 try {
 Codec codec[] = { new RotationEffect() };
 videoTrack.setCodecChain(codec);
 } catch (UnsupportedPlugInException e) {
 System.err.println("The processor does not support effects.");
 // Realize the processor.
 p.prefetch();
 if (!waitForState(p.Prefetched)) {
 System.err.println("Failed to realize the processor.");
 return false;
 // Display the visual & control component if there's one.
 setLayout(new BorderLayout());
 Component cc;
 Component vc;
 if ((vc = p.getVisualComponent()) != null) {
 add("Center", vc);
 if ((cc = p.getControlPanelComponent()) != null) {
 add("South", cc);
 // Start the processor.
 p.start();
 setVisible(true);
 addWindowListener(new WindowAdapter() {
 public void windowClosing(WindowEvent we) {
 p.close();
 System.exit(0);
 return true;
public void addNotify() {
 super.addNotify();
 pack();
* Block until the processor has transitioned to the given state.
* Return false if the transition failed.
boolean waitForState(int state) {
 synchronized (waitSync) {
 try {
 while (p.getState() != state && stateTransitionOK)
 waitSync.wait();
 } catch (Exception e) {}
 return stateTransitionOK;
* Controller Listener.
public void controllerUpdate(ControllerEvent evt) {
 if (evt instanceof ConfigureCompleteEvent ||
 evt instanceof RealizeCompleteEvent ||
 evt instanceof PrefetchCompleteEvent) {
 synchronized (waitSync) {
 stateTransitionOK = true;
 waitSync.notifyAll();
 } else if (evt instanceof ResourceUnavailableEvent) {
 synchronized (waitSync) {
 stateTransitionOK = false;
 waitSync.notifyAll();
 } else if (evt instanceof EndOfMediaEvent) {
 p.close();
 System.exit(0);
* Main program
public static void main(String [] args) {
 if (args.length == 0) {
 prUsage();
 System.exit(0);
 String url = args[0];
 if (url.indexOf(":") < 0) {
 prUsage();
 System.exit(0);
 MediaLocator ml;
 if ((ml = new MediaLocator(url)) == null) {
 System.err.println("Cannot build media locator from: " + url);
 System.exit(0);
 TestEffect fa = new TestEffect();
 if (!fa.open(ml))
 System.exit(0);
static void prUsage() {
 System.err.println("Usage: java TestEffect <url>");

Can you please send me Your codec class and guide me the way you use it .. i am trying to apply some filters on the movie before presenting. Any help would be appreciated.

How To save a music file from an email

PLEASE HELP ME I CANT FIGURE OUT HOW TO SAVE SONG FROM MY ITUNES LIBRARY THAT U SENT TO MY EMAIL
Post relates to: Pixi Plus p8wu0 (AT&T)

Open email attachments
You can receive any kind of file sent to you in email, but you can open an
attachment only if your phone has an application that can open the file type.
To open a single attachment: Tap the attachment name to download the
attachment. If the attachment is a supported file type (MP3, PDF, DOC,
XLS, PPT, GIF, or JPG), it opens automatically.
To open multiple attachments: Tap the list of attachment names to view
the attachments, and tap an attachment name to open the file.
Save attachments;
When you open attachments of certain file types, you can save them to your
phone so you can view them later in one of your phone’s applications.
1. Open the attachment (see Open email attachments).
2. Do one of the following:
• For pictures in JPG, GIF, BMP or PNG format, tap Copy To Photos.
• For other file types, open the application menu and tap Save As. If
the Save As menu item is not available, you cannot save the
attachment.
To open a saved attachment on your phone, open the application that can
display the attachment. The attachment appears in the list of available files.
Tap the file to open it.
You can find this info. on page 74 of the user guide.
For reference purposes, click on the following link for the support page for your device on the kb.palm.com webpage.
http://kb.palm.com/wps/portal/kb/na/pixi/pixi/att/home/page_en.html
There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.

HT5312 how ts save my apple id

how ts save my apple id

If you mean that you've forgotten the answers to your questions then read the HT5312 page that you posted from, it has instructions for how to reset them i.e. if you have a rescue email address set up on your account then steps 1 to 5 half-way down that page should give you a reset link.
If you don't have a rescue email address then you will need to contact iTunes Support / Apple in your country to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the HT5312 page that you posted from to add a rescue email address for potential future use

How to save our ipod on our computer ?

do somebody know how to save everything from our ipod on our computer ? because i don't wanna lose everything from my ipod after my updates, thanks,

You should probably disable the autosync functionality first by going to Edit -> Preferences, clicking the Devices tab, and enabilng the prevent iPods,iPhones, and iPads from automatically syncing option.
Before doing anything else, authorize the new computer with your iTunes Account. In iTunes, choose Store -> Authorize This Computer and enter in the correct credentials. Either copy a backup file from your old computer to your new one or create a new backup of your iPod in iTunes before letting it sync.
Then right->click on your iPod Touch from under the Devices section in the left hand pane of iTunes and choose Backup. You might also want to take a look at this article to see what it all included in the backup.
http://support.apple.com/kb/ht1766
Now onto synced content such as music, videos, photos, etc. For iTunes purchases you can copy them back into iTunes by choosing File -> Transfer Purchases. For all other nonpurchased iTunes content, see this older post from another forum member Zevoneer covering different software availbable to assist you with this task.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
Once the backup has been made and all other synced content such as music, videos, and photos are back in your iTunes library, restore your iPod from that backup you made earlier. Here is more on backing up and restoring your iPod.
http://support.apple.com/kb/ht1414
B-rock

How can i change the length of a narration ?

how can i change the length of a narration ?

hotts77
Thanks for the reply.
Still not sure what version of Premiere Elements that you are using. But, the following should apply nonetheless
What you describe is what I have described in my blog post and for which I have discussed all aspects of the issue. There
is no workaround to force the program to give you more than you are getting now without other clips also on the track(s). The
blog post just about says it all.
You might have to weigh the pros and cons of
a. Recording your narrations as .wav files in a free audio editor such as Audacity
Audacity: Free Audio Editor and Recorder
and then importing those into your Premiere Elements project with Premiere Elements' Add Media/Files and Folders/Project Assets from where you drag the narration to the Narration Track.
b. Put any video clips on the Timeline when you are recording your Premiere Elements narrations with its Narration Tool. Then remove these video clips and replace them with the real thing when you are ready to put narration and clips into the project.
Please let me know if you are OK with the details.
Thank you.
ATR

How do I post an iPhoto slideshow to YouTube?

How do I post an iPhoto slideshow (with music) to YouTube?

I was able to upload my iPhoto slides to YouTube. Two questions:
1. How do I get the slideshow transitions I saved in iPhoto to transfer to YouTube? The transitions didn't save and it makes for a choppy viewing experience.
2. How can I find and add DRM free music? Right now there is no music and I need something.
Here's my YouTube clip from Phnom Penh, Cambodia. I'd love to hear comments on how to improve the slideshow.
Many Thanks.
http://www.youtube.com/watch?v=wWXvZhOkmiY

How to save post roll length

Similar Messages

Maybe you are looking for