How to save psd file to iMac

Can someone please help me....
Im very new to iMac as Ive always had a PC...
My question is... I have created a document using Photoshop Elements 9, but havent got a clue how or where to save the .psd file.
I thought I would be able to select iPhoto but I guess it doesnt support psd's...
This is really urgent, if anyone can help it would be most appreciated..
Janet   

Thank you so much Boscobrains... I feel like a real doughnut, but I was so confused at the time...
All sweet now, I created folders for my .psd, .jpegs (full size) and .jpegs (for web)....
Thank you again

Similar Messages

  • How to save psd files...

    how to save psd files so other can change (with all fonts and Layers)
    I need to know how to save everything in the psd so others still can use it.??

    Hi,
    If you have photoshop and you are working on it and have used layers , fonts , and other things
    Then after completing your work, click save and it will open save Box,
    make sure the file format in the box should be PSD and then you may save the file and then you can share with any one.
    Any one who has Photoshop will be able to open that file and can edit the layers and fonts..
    --Baljeet

  • How is the best way to backup and organize Adobe layered .PSD files on iMac OSX maverick?

    How is the best way to organize and backup Adobe layered PSD files on iMac desktop OSX maverick?
    I lost all my Adobe Photoshop files + everything else on my IMAC when it crashed. They reinstalled Operating System.  But now i must install programs such as MS Word & Adobe indesign suite.
    Please help me determine what is the bestway to backup Adobe layered  PSD files? I believe these are my choices to be assured this doesn't ever hapen again. Please comment.
    Buy Apple Airport Time capsule $280.  But I am not sure if it can store PSD layers. Can it or do you have to have Apple Apperture  software to act be sure layers are saved
    I had had trouble getting Adobe Cloud to sync to save files and so just trusted my computer to not ever crash.  Any hints on this procedure
    Are there any hints on PhotoShop image organization for a current IMac usser ?
    Please help.
    Teann  ucreateit

    My backup plan is to use Time Machine to make a backup to an external disk drive plus I also do a clone of my system disk. So far between the bootable clone and the Time Machine backup this plan has covered all of my needs.
    Allan

  • Load/Save psd file

    Hi, what is the best way to figure out how to load and save .psd files with layers in Windows? Is there C++ sample code available anywhere? I need to load the layers that contain images into memorybuffers, including transparency, and also be able to supply memorybuffers and save them as a layered psd file. I would appreciate any help.

    Btw, this will all happen outside of Photoshop. I just want to use the psd format so that users of my program can have the convenience of opening the image files in Photoshop as well.

  • Open/edit/save psd file in my own developed application

    Hi all,
    I would like to confirm about:
    Do I violate Adboe Macromedia license if I develop a independent desktop application allowing open/edit/save psd file right in my own developed application? (support psd file version is up to CS4).
    thanks and regards

    No we do not have an open source code for reading .folio files. You can read .folio file in Adobe Content Viewer and in your customer viewer app.

  • How to save pdf file in database

    Dear All,
    my application is forms 6i and database is 8i,requirement is that how to save pdf file in database and users can view through forms

    I'll apologize up front for the length of this post. I have a few database procedures I created that write a file to a BLOB column in a table as well as retrieve the BLOB from the column after it stored there. I have successfully stored many different types of binary file to the database using these procedures - including PDF files. I have not used these procedures in a Form so I can confirm that they will work, but theoretically they should work. I'm including the code for each procedure in this posting - hence the apology for the long post! :-)
    Also, since these procedures reside on the database you will need to use Forms TEXT_IO built-in package to write your file to the server before you can use these procedures to store and retrieve the file from the database.
    These procedures reads and writes a binary file to a table called "LOB_TABLE." You will need to modify the procedure to write to your table.
    -- Author :  Craig J. Butts (CJB)
    -- Name   :  load_file_to_blob.sql
    --        :  This procedure uses an Oracle Directory called "IN_FILE_LOC".  If you
    --           already have a directory defined in the database or would prefer to use
    --           a different Directory name, make sure you modify line 21 to reflect the
    --           new Directory name.
    -- ==================================================================================
    -- History
    -- DATE        WHO         DESCRIPTION
    -- 12/11/07    CJB         Created.
    CREATE OR REPLACE PROCEDURE load_file_to_blob (p_filename IN VARCHAR2) IS
       out_blob    BLOB;
       in_file     BFILE;
       blob_length INTEGER;
       vErrMsg     VARCHAR2(2000);
    BEGIN
       -- set the in_file
       in_file := BFILENAME('IN_FILE_LOC',p_filename);
       -- Get the size of the file
       dbms_lob.fileopen(in_file, dbms_lob.file_readonly);
       blob_length := dbms_lob.getlength(in_file);
       dbms_lob.fileclose(in_file);
       -- Insert a new Record into the tabel containing the
       -- filename specified in P_FILENAME and a LOB_LOCATOR.
       -- Return the LOB_LOCATOR and assign it to out_blob.
       INSERT INTO lob_table (filename, blobdata)
          VALUES (p_filename, EMPTY_BLOB())
          RETURNING blobdata INTO out_blob;
       -- Load the file into the database as a blob.
       dbms_lob.open(in_file, dbms_lob.lob_readonly);
       dbms_lob.open(out_blob, dbms_lob.lob_readwrite);
       dbms_lob.loadfromfile(out_blob, in_file, blob_length);
       -- Close handles to blob and file
       dbms_lob.close(out_blob);
       dbms_lob.close(in_file);
       commit;
       -- Confirm insert by querying the database
       -- for Lob Length information and output results
       blob_length := 0;
       BEGIN
          SELECT dbms_lob.getlength(blobdata) into blob_length
            FROM lob_table
           WHERE filename = p_filename;
       EXCEPTION WHEN OTHERS THEN
          vErrMsg := 'No data Found';
       END;
       vErrMsg := 'Successfully inserted BLOB '''||p_filename||''' of size '||blob_length||' bytes.';
       dbms_output.put_line(vErrMsg);
    END;
    -- Author   :  Craig J. Butts (CJB)
    -- Name     :  write_blob_to_file.sql
    -- Descrip  :  This procedure takes a BLOB object from a database table and writes it
    --             to the file system
    -- ==================================================================================
    -- History
    -- DATE        WHO         DESCRIPTION
    -- 12/11/07    CJB         Created.
    CREATE OR REPLACE PROCEDURE write_blob_to_file ( p_filename IN VARCHAR2 ) IS
       v_blob      BLOB;
       blob_length INTEGER;
       out_file    UTL_FILE.FILE_TYPE;
       v_buffer    RAW(32767);
       chunk_size  BINARY_INTEGER := 32767;
       blob_position INTEGER := 1;
       vErrMsg     VARCHAR2(2000);
    BEGIN
       -- Retrieve the BLOB for reading
       BEGIN
          SELECT blobdata
            INTO v_blob
            FROM lob_table
           WHERE filename = p_filename;
       EXCEPTION WHEN OTHERS THEN
          vErrMsg := 'No data found';
       END;
       -- Retrieve the SIZE of the BLOB
       blob_length := DBMS_LOB.GETLENGTH(v_blob);
       -- Open a handle to the location where you are going to write the blob
       -- Note:  The 'WB' parameter means "Write in Byte Mode" and is only
       --          available in the UTL_FILE pkg with Oracle 10g or later.
       --        USE 'W' instead for pre Oracle 10q databases.
       out_file := UTL_FILE.FOPEN('OUT_FILE_LOC',p_filename, 'wb', chunk_size);
       -- Write the BLOB to the file in chunks
       WHILE blob_position <= blob_length LOOP
          IF ( ( blob_position + chunk_size - 1 ) > blob_length ) THEN
             chunk_size := blob_length - blob_position + 1;
          END IF;
          dbms_lob.read(v_blob, chunk_size, blob_position, v_buffer );
          UTL_FILE.put_raw ( out_file, v_buffer, TRUE);
          blob_position := blob_position + chunk_size;     
       END LOOP;  
    END;Hope this helps.
    Craig...
    -- If my response or the response of another is helpful or answers your question please mark the response accordingly. Thanks!

  • Could u plz help me to find simple example for how to save data file in a spread sheet or any other way in the real time controller for Sbrio 9642 using memory or usb flash memory

    Could u plz help me to find simple example for how to save data file in a spread sheet or any other way in the real time controller for Sbrio 9642 using memory or usb flash memory

    Here are a few Links to a helpful Knowledge Base article and a White Paper that should help you out: http://digital.ni.com/public.nsf/allkb/BBCAD1AB08F1B6BB8625741F0082C2AF and http://www.ni.com/white-paper/10435/en/ . The methods for File IO in Real Time are the same for all of the Real Time Targets. The White Paper has best practices for the File IO and goes over how to do it. 
    Alex D
    Applications Engineer
    National Instruments

  • How to save CSV file in application server while making infospoke

    How to save CSV file in application server to be used as destination while making infospoke.
    Please give the steps.........

    Hi
    If you want to load your flatfile from Application server,then you need to trasfer your file from your desktop(Computer) to Application server by using FTP.
    Try using ARCHIVFILE_CLIENT_TO_SERVER Function module.
    You Just need to give thesource path and the target path
    goto SE37 t-code , which is Function module screen, give the function name ARCHIVFILE_CLIENT_TO_SERVER, on click F8 Execute button.
    for path variable give the file path where it resides like C:\users\xxx\desktop\test.csv
    for target path give the directory path on Application server: /data/bi_data
    remember the directory in Server starts with /.
    U have to where to place the file.
    Otherwise use 3rd party tools to connect to ur appl server like : Core FTP and Absolute FTP in google.
    Otherwise...
    Goto the T.code AL11. From there, you can find the directories available in the Application Server.
    For example, if you wanna save the file in the directory "DIR_HOME", then you can find the path of the directories in the nearby column. With the help of this, you can specify the target path. Specify the target path with directory name followed by the filename with .CSV extension.
    Hope this helps
    regards
    gaurav

  • Does anyone know how to save a file in CC 10.0 or higher that is viewable in CC 9.2?

    I am trying to make my fiels viewable to someone who has Adobe CC version 9.2, but I have version 10.0. Does anyone know how to save my files so the are readable?

    You will likely get better program help in a program forum
    The Cloud forum is not about using individual programs
    The Cloud forum is about the Cloud as a delivery & install process
    If you will start at the Forums Index https://forums.adobe.com/welcome
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

  • How to save iPhoto file in a separate portable hard disk drive?

    How to save iPhoto file in a separate portable hard disk drive?

    You want to move the iPhoto Library?
    Make sure the drive is formatted Mac OS Extended (Journaled)
    1. Quit iPhoto
    2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
    3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
    4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
    Regards
    TD

  • How to save Numbers file as Excel (XLSX) file ?

    I just want to know how to save Numbers files into Excel format. Because other than Mac users can't able to access Numbers format.

    File, Export To, Excel…

  • How to open PSD file recieved via email on iPad using Photoshop Touch without Creative Cloud?

    Hi, how to open PSD file recieved via email on iPad using Photoshop Touch without the need of using Creative Cloud? Thanks.

    Hi Super Nemo
    Currently the only way to open psd files on Photoshop touch is via the creative cloud. Also, the layers you created from Photoshop on your desktop machine will be flattened when opened with Photoshop touch on your iPad. But you can retain the layers from the touch app when opening the psdx file on your desktop photoshop.
    This link might help you: http://forums.adobe.com/docs/DOC-1336
    -Sharon

  • How to save .pdf file using office word and excel

    Can someone help me how to save .pdf files using office word and excel?  I reinstalled my adobe 7.0 pro in my new pc and before I was able to do it but with my old pc.

    For anything after Office 2003, you have to print to the Adobe PDF printer. If you installed AA 7 on OS newer than XP, you may have to do a workaround to get it to work. With later versions of WORD you can always use the MS plugin for creating PDFs.

  • HT3775 how to play .ram files on iMac ?

    how to play .ram files on iMac ?

    Greetings,
    If I had any Real Audio files I could tell you.
    Try a few different players:
    VLC says they have "partial" support: http://www.videolan.org/
    MPlayer: http://mplayerosx.sourceforge.net/
    Perian: http://perian.en.softonic.com/mac
    Hope one of those work for you.

  • Can't save psd file in CS5 op afp nas

    Hello,
    When I want to save a psd-file with Photoshop 12.0.2 CS5 on a synology NAS (DSM 3.1-1605) with afp-protecol, the file saves en disappears. It only happened with psd files. Tiff (also in layers), jpg or psb files saves perfectly. Before installing CS4 we had no problem with saving Photoshop psd files in CS4, but we now have the same problems to save psd files in CS4.
    Is there a solution?
    Thanks!
    Percy

    Thanks for your response. It's strange that we can store all types of files formats. The only thing that fails is a psd file. Photoshop CS5 also does not mention that it failed. No Error. If you look at the place where your file is saved, you see the same psd appear and then disappear again.
    It remains strange that we had not psd saving problems last week. After installing learning CS5 we got these problems with just psd-files.
    During a Save command throws Adobe Photoshop CS5 the original file from the server, then a new empty file is written in the same place and it is new Photoshop file is written, so updated. This seems to happen in a single action.
    This is what I've found about the saving psd problem:
    It seems that Mac OS X's use of "Stream Files" a major role in this issue, these are also called Named Streams mentioned. Mac OS X SMB gebuikt Stream Files on shared volumes. During a save operation (save) indicates the server, a NAS or SAN wrong message back to the computer that the Photoshop file is saved causing an adverse reaction occurs, and Photoshop "thinks"that it failed to save the file. Depending on the action response from the server, NAS or SAN in the client error messages may vary.
    Various Stream Files used during a preservation action, including AFP_Resource. Thus, various files are kept:
    • Photoshopfile.psd
    • Photoshopfile.psd:AFP_resource
    • ._Photoshopfile.psd
    The back reaction is a response of "Photoshopfile.psd: AFP_resource" and not "Photoshopfile.psd. The server, SAN or NAS not see the Stream Files and give a response back on the newly saved file.
    But I do not look where the problem lies. I would like to find a good solution. Thanks!

Maybe you are looking for