How to save Recovery Partition before RAID?

Tomorrow I will receive from a prominent online merchant that starts with an A, my niew 2011 Mac Mini Server. Can't wait. I have used one at work at they are great. Furthermore, I also put hte one at work into RAID 0, which is great too.
I plan to put my home machine in RAID 0 as well (I try to keep plenty of backups, knock on wood).
However, I have a concern! What about the Recovery Partition? Being that mine will be home use, I'm a bit nervous about forever losing the Receovery Partition in case I ever want to sell the Mini and get a new model.
Can I backup the recovery partition to a SD card by booting into recovery and using the disk utility before I go RAID 0?
However, I know from work, when you reinstall Lion, it doesn't put a Recovery back on, if you do RAID 0.
If you someday put it back to two separate drives and reinstall Lion, will it then put the hidden Recovery Partition back?
Thank you!

If you use RAID0 or RAID1 you cannot have a recovery partition (they are not compatible). However your new Mac mini can do an Internet based recovery. See http://support.apple.com/kb/HT4649
I would recommend you clone both the recovery partition and the normal partition before converting to RAID so you have a full backup. The most important thing is that the shipped boot partition on your Mac mini Server will have the Server.app software which is not available via the Internet Recovery or the Recovery partition. Doing a full backup will also cover your iLife applications as well.

Similar Messages

How to create recovery partition in new(changed) HDD.

my new HP pavilion g4 laptop HDD have crased, then I replce it by HP care. I upload original win 7 by recovery disk(DVD) but when I open my computer it shows only one partition (C drive, there is no recovery partition and HP tool.
So how to creates recovery partition by recovery disk(DVD)...........please help me.

Creating the recovery partition
Right-click the start orb, and start 'Disk Management'.
Shrink the C: drive by let's say 20-30GB.
Then create a new Partition and assign the R: label to it and name it RECOVERY.
Then open command prompt as administrator and type: 'recimg /createimage <directory>',
In this case: 'recimg /createimage R:\' to save it on the new partition.
This step may consume a lot of time.
Now we need to register the newly created recovery image: 'recimg /setcurrent <directory>'
'recimg /setcurrent R:\'
Voila you are done.
Restoring from recovery partition
You may want to use this restoring method by default, because it is the easiest way to do so if your recovery partition is still intact. If not, look at the other recovery methods to see which suits you best. This is usually the way you reset or refresh your Windows installation if you purchase a computer from a brand like Lenovo instead of building one yourself
Press the Windows-key + C to open the charms bar or swipe in from the right.
Click Settings.
Click Change PC Settings.
Click Update & Recovery in the menu on the left.
Click Recovery.
If all your documents are safe and sound in your user folder, you can use Refresh your PC without affecting files. However I still recommend taking a back-up... If you want to do a complete reinstallation of Windows and also clean your user folder in the process then choose Remove everything and reinstall Windows.

How to remove recovery partition of HP Pavilion X2 10

HP Pavilion X2 10 comes with a 32GB drive, like many other Windows 8 tables, and only 14GB is available to users. The free space is decreases as I install and save data to the device, and quickly reached 3GB to a level that machine start reising waring.
After making recovery media, I tried to remove the recovery partition, but I could not find the way. In Windows' Disk Management, I does not show an option 'Delete Volume' for the recovery partition. The official procedures with HP Recovery Manager did not work since there is not 'Advanced options'
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c00810279
Does anyone know how to remove a recovery partition in Windows 8 tablet devices?

You can't remove the recovery partition because it is necessary for WIMBoot. Basically, the recovery partition has a copy of the Windows image that it uses to boot the system. This is done to save disk space on the primary partition, but doesn't seem to help much on the Pavilion X2. If you try and remove it with a third-party utility, Windows will be unable to boot because it can no longer find the necessary system files. Here's an article about WIMBoot and how it works: http://www.howtogeek.com/196416/wimboot-explained-how-windows-can-now-fit-on-a-tiny-16-gb-drive/
The only solution I've found is deleting all partitions and installing a fresh copy of Windows 8.1 from a flash drive. This will create a traditional Windows installation, without WIMBoot. Note that this will still create a recovery partition, but it will be very small (less than 500mb in my case). My Pavilion X2 had about 20 gb of free space after installation, on a 29 gb primary partition. This is without any updates installed.
The real mystery here is why the "HP Support Agent" didn't know any of this, and essentially advised us to destroy our Windows installations. HP needs to train their support agents better.

How to make Recovery Partition in my new HDD (Win8.1)

I already re-install my Win8 with usb.
But after finish the installation (I choose Fully Clean in my new HDD), why there is no Recovery Partition like my old HDD (original HDD)?
how to make a Recovery Partition in my new HDD?
Thx

Creating the recovery partition
Right-click the start orb, and start 'Disk Management'.
Shrink the C: drive by let's say 20-30GB.
Then create a new Partition and assign the R: label to it and name it RECOVERY.
Then open command prompt as administrator and type: 'recimg /createimage <directory>',
In this case: 'recimg /createimage R:\' to save it on the new partition.
This step may consume a lot of time.
Now we need to register the newly created recovery image: 'recimg /setcurrent <directory>'
'recimg /setcurrent R:\'
Voila you are done.
Restoring from recovery partition
You may want to use this restoring method by default, because it is the easiest way to do so if your recovery partition is still intact. If not, look at the other recovery methods to see which suits you best. This is usually the way you reset or refresh your Windows installation if you purchase a computer from a brand like Lenovo instead of building one yourself
Press the Windows-key + C to open the charms bar or swipe in from the right.
Click Settings.
Click Change PC Settings.
Click Update & Recovery in the menu on the left.
Click Recovery.
If all your documents are safe and sound in your user folder, you can use Refresh your PC without affecting files. However I still recommend taking a back-up... If you want to do a complete reinstallation of Windows and also clean your user folder in the process then choose Remove everything and reinstall Windows.

X230i How to Backup recovery partition?

I bought a new x230i but I would like to install a new OS rather than using the pre-installed one. How can I backup those ThinkVantage tools, drivers, OS, etc first? I assume its all on the recovery partition, correct?

iscgrant wrote:
There is a link on the ThinkVantage Tools named Factory Recovery Disks. It lets you make one (and only one) copy of the recovery disk. I messed up and created it on a SDCard which I found out isn't bootable so be carefull :-). I believe it can copy to DVD disks and you can also use a USB Stick. I found that 16gig is needed but it might be different for your system. I ended up having to call support for replacement recovery disks because I messed up my one and only chance.
Hey,
Do you still have that SDCard with the non-booting recovery image on it?
Something I'd try if I had one of those and a spare 16G (or 8g?) USB flash drive: prepare the flash drive per the link below, then simply copy the contents of the SDCard to it. Make hidden stuff visible first. Not sure that's necessary, but just in case...
New or used USB memory keys or USB flash drives require an active partition created from within Wind...
This has worked for USB flash to USB flash to rescue an improperly formatted flash drive. It just might work in your case.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Equium will not boot - how to access Recovery partition?

Hi, my sister has a 2008 Equium A200-1V0 with Vista 32-bit which will not boot (probably due to virus rootkit damage). It loads the BIOS but then goes straight to black screen with flashing cursor.
F8 does not work.
F2 goes to Phoenix TrustedCore Setup utility. The Toshiba hard drive and CD-ROM drive are listed in Main and Boot in the correct order.
Using F12 I can get it to boot from a Win7 64-bit repair disc I burned using my laptop.
However, this does not recognise the OS nor any image or restore points (because it is 64-bit) but it will load Command Prompt.
In *Command Prompt*, I can start Notepad and when I click File/ Open and double click on Computer it shows 4 Hard drives as follows:
Local Disk (C:)
Data (D:) 42 GB free of 54.5 GB
WinRE (E:) 1.11 GB free of 1.46 GB
Boot (X:) 29.0 MB free of 31.5 MB (which is used by the Repair disc)
So the C: drive is listed but without capacity.
*CHKDSK*
chkdsk c: /r and press return
"The type of the file system is NTFS.
Unable to determine volume version and state. CHKDSK aborted.
Failed to transfer logged messages to the event log with status 50.
*Running TESTDISK*
Analysis:
Partition Start End Size in Sectors
1 P Windows RE(store) 0 32 33 191 89 26 3072000
2 * HPFS - NTFS 191 89 27 7477 118 1 117051392
3 P HPFS - NTFS 7477 118 2 14592 190 62 114307072 (data)
* = Primary bootable
When doing Quick Search and then P - list files, of the second partition it reports:
"Can't open filesystem. Filesystem seems damaged."
So what I would like to do is boot up from Windows Restore on the E drive.
My question is to any Toshiba experts: When F8 does not work how do I use the recovery partition???
Laptop is:
Part Number : PSAF5E-002005KS
Key Features
- Intel Pentium Dual-Core Processor T2310
- Genuine Windows Vista Home Premium Edition
- DVD Super Multi (Double Layer) drive
- 2,048 (1,024 + 1,024) MB RAM (667 MHz)
- 15.4 " WXGA TFT display 1,280 x 800

*UPDATE*:
I have borrowed a genuine Windows Vista Home Premium 32-bit dvd and booted up with that.
Clicked on "Repair your Computer"
Then it goes striaght to System recovery Options but no Operating System is shown. Click Next.
Then:
"Choose a Recovery Tool.
Operating system: Unknown on (Unknown) Local Disk"
*Startup Repair*
This takes 1 second.
Root cause found
System volume on disk is corrupt.
*System Restore*
"X - To Perform an offline System Restore, you must specify which Windows installation you would like to restore.
For example, if the installation located in "C:\Windows" should be restored enter the following command:
rstrui.exe /OFFLINE:C:\Windows "
*Windows Complete PC Restore*
" No valid backup locations could be found.
Windows cannot find a backup on the hard disks or DVDs on this computer. Attach the correct hard disks or insert the last backup DVD and then start the restore process again. "
Windows Memory Diagnostic Tool
Windows cannot check for memory problems...[snip]
*Command Prompt*
This is working fine.
CHKSDK C:
The type of file system is NTFS.
Unable to determine volume version and state. CHKDSK aborted.
The HDD is 120 GB and is split by Toshiba into 3 partitions.
C:\ drive (56GB) is bootable with Windows - this is corrupted.
D:\ drive (55 GB) has all Data - fully accessible
E:\ drive is CDROM
F:\ drive (1.46 GB) is the WinRE recovery partition - this is fully accessible.
So my question still remains: can I recover my Toshiba laptop using this recovery partition?
PLEASE NOTE: as mentioned above, pressing F8 during boot has no effect and therefore Safe Mode cannot be accessed.

How to clone recovery partition to SSD so F11 works with new SSD?

I received my new Envy 15 Laptop today. It has a 1Tb 5400rpm hard drive but I want to replace with SSD. I tried cloning it to a 300Gb SSD drive. I used "EaseUS Todo Backup Free".
The laptop boots up to Windows 8.1 successfully on the new cloned SSD , but when I press F11 key during bootup to load the recovery partition it errors out. If I swap back to the 1TB 5400rpm original drive, the F11 key bootup recovery works.
How do I clone the recovery partion from the 1TB HDD to the 300gb SSD ?

Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I understand that you are having an issue migrating your Hard Disk to a SSD, and wanted to assist you! You may be having this issue, because you tried to migrate a larger 1TB HDD to a smaller 300GB SSD drive. Please review the following resources to assist you with this situation:Cloning Hard-drive to SSD Cloning a larger HDD to a smaller SSDHow to migrate HDD to SSD without reinstalling windows (Includes UEFI FIX) These resources are not HP supported Web sites. Please let me know if this information was helpful by clicking the thumbs up below.
Regards!

How to update recovery partition from 10.8.2 to 10.8.3

I recently update my MBP from 10.8.2 to 10.8.3. I also use BootCamp to Windows 7. When starting the MBP with holding alt/option button, it says that the recovery partition is still in 10.8.2. How can I update the recovery to 10.8.3?
Thanks in advance.

kokeropie wrote:
Being new to Mac OS, I thought that the Recovery partition should the same with the OS installed. So when I want to recover my MBP, I can recover to the latest OS installed on the MBP.
Anyway, what the function of the recovery partition? I know that I can restore my current setup and data using time machine. Or the time machine rely on recovery partition to restore the data?
When using the Recovery partition to Reinstall OS X (for your new Mac), you will get the version of OS X that shipped with your Mac (unless Apple updates that version on their servers). So, for example, let's say your Mac shipped with 10.8.2 (Recovery partiton also that version) and you update OS X to 10.8.3 from Software Updates. When you restart into the Recovery partition using the Command+R keys and you want to Reinstall OS X, you will get what ever version is out there for your Mac model which might be 10.8.2. This means after the install completes you would need to run Software Update to update it back to 10.8.3. So, the version of the Recovery partition has no bearing on what version of OS X will download. Lion (10.7.x) was the same way until version 10.7.2. When updating Lion 10.7 or 10.7.1 to 10.7.2, there was also an update for the Recovery partition. To my knowledge there haven't been any Mountain Lion updates like that. The full installer will always write a Recovery partition and the version number will be the same as the OS X version. However, Software Update will not update the Recovery partition.
The functions of the Recovery partition are many. When you boot into it you see the OS X Utilities menu. From there you can Reinstall OS X, use Disk Utility to manage your drives, Restore from a Time Machine backup, use Terminal (from the Utilities menu bar option) to do command line commands, change your Startup Disk and other functions.

How To Move Recovery Partition in between System & Data Partition To Extend System Partition?

Hello, I have recently purchase an ASUS S400CA Ultra Notebook and the hard drive has 1)EFI Partition & 3) Recovery Partitions with one of the recovery partitions being in between C:/ System & D:/Data partition. I am wanting to delete the D:/Data
partition to extend and maximize the C:/ System partition, but I am not familiar with how to do so with this recovery partition in between them.
Is there a way that I can move or copy the recovery partition that is in between C:/ & D:/ to the other side of D:\, delete the old recovery partition location and D:/ partition, then extend C:/ without destroying the recovery partition or any links,
etc. for the recovery partitions???
I do not want to delete any recovery partitions, only my D:/data partition because my C:/system partition is too small and I don't want to have to manually balance
my data & programs between the 2 partitions!
I just need to find a way that will allow me to move or copy this recovery partition that is in between C:/ & D:/ to the other side(right) of D:\, so I can delete its old recovery
partition location and the D:/ partition, then extend C:/ without destroying the recovery partition and / or any links, etc. for the recovery partitions???
I tried to provide a picture / screen shot of Disk Management, but the site wouldn't allow it because it needed to verify my account that I've had here for a long time! Go
figure!

Hi,
To verify your account, please refer to
http://social.msdn.microsoft.com/Forums/en-US/5a35b6c8-7a1a-4dc9-9b28-be69c55afb96/verify-your-account-13?forum=reportabug
Meanwhile, please upload the screenshot.
Regards,
Kelvin Xu
TechNet Community Support

How to clone recovery partition to SSD

I received my new Envy 15 Laptop today. It has a 1Tb 5400rpm hard drive but I want to replace with SSD. I tried cloning it to a 300Gb SSD drive. I used "EaseUS Todo Backup Free".
The laptop boots up to Windows 8.1 successfully on the new cloned SSD , but when I press F11 key during bootup to load the recovery partition it errors out. If I swap back to the 1TB 5400rpm original drive, the F11 key bootup recovery works.
How do I clone the recovery partion from the 1TB HDD to the 300gb SSD ?

Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I understand that you are having an issue migrating your Hard Disk to a SSD, and wanted to assist you! You may be having this issue, because you tried to migrate a larger 1TB HDD to a smaller 300GB SSD drive. Please review the following resources to assist you with this situation:Cloning Hard-drive to SSD Cloning a larger HDD to a smaller SSDHow to migrate HDD to SSD without reinstalling windows (Includes UEFI FIX) These resources are not HP supported Web sites. Please let me know if this information was helpful by clicking the thumbs up below.
Regards!

Encore Mini WT7-C-100 - how to delete recovery partition

Hi all,
I own an Encore Mini WT7-C-100 tablet with only 16GB storage.
After following all possible and existing solutions and recomendations in order to free up storage, free space on C: is limited to barely 500MB.
On the other hand, I noticed that the resovery partitiobn is almost 3GB large.
Though it seems that there is no way to remove this partition and extend C: in order to gain more disk space (3,5GB would be more than enough for me). Right clicking on this partition in Disk Management displays no avaliable actions (except "Help").
Please notice that I have already created a copy of the recovery partion on a USB drive (various posts in various forums indicated that Windows, after finishing with the copy on the USB, would propose for deleting the recovery parition but not such thing happened).
Please advice how to delete the recovery partition or for other actions in order to free up disk space in C:
George
Athens, Greece

Try to start the recovery using the HDD recovery procedure.
If you want to access the boot menu on please press and hold the "Vol+" button and turn on the device pressing power button.
After a few seconds the boot option menu will appear.
Then select "HDD Recovery" and the rest of the procedure is similar to the Windows 8 recovery process you can find here:
http://aps2.toshiba-tro.de/kb0/HTD1303440001R02.htm
If this doesn’t help, try to recover the Toshiba WT8 / Encore tablet from a created recovery media
http://aps2.toshiba-tro.de/kb0/HTD4103K90000R01.htm
If you don't have the recovery media, you could order this here:
http://backupmedia.toshiba.eu
I keep the finger crossed for you...

How to move recovery partition to sd and where are the bios upates?

Hi,
Im a newbie. Firstly how do I move the recovery partition to my micro sd? Secondly, when I try to find support drivers, bios updates etc, the encore doesn't appear as an option, it only list notebooks!
Tia
Olly

I need some help with this also. The Toshiba utility Create Recovery Media won't back the recovery partition up to an SD card. It wants a USB drive. Why in the world would a tablet back up to a USB device when it only has an SD card?. I've seen some extremely laborious processes to create another kind of recovery partition. I'm out of space on my 32GB Encore and I need to get the recovery partition off of the C: drive. Help anyone...??? Thanks!

How to reformat recovery partition

HP 2000-369WM Notebook
Product: QE339U
Windows 7 64-bit
Norton Anti Virus Internet
Recovery manager was modified on 6-10-12. Reinstalled OS with OEM discs. Let system run until everything was installed. Appears only the Windows partition was reformatted, NOT the Recovery partition. Was able to install HP printer and it worked fine until 6-10-12. Now pc won't connect to it to print. Copier works fine. Several Security updates failed! Please help! Thank you,

So its a printing problem you are having problems with? One problem at a time please.
HP has free printer diagnostic tools to help.
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02073861&jumpid=ex_r4155/hho/ipg/cc...

How to access recovery partition

hi,
i have a toshiba satellite L-305 S5919 laptop. i want to reinstall vista in my laptop. but i am not able to access the recovery partition. while booting it is not showing the recovery partition. but when i take the computer disk management it is showing a primary partition with 7 GB size. i suppose that is the windows vista recovery partition. can u help me in accessing that recovery partition and restoring to factory settings.
regards,
abt

Satellite L305-S5919
See the section titled Hard Drive Recovery Utilities, which begins on p. 60 of your User's Guide. .
Satellite L300 Series User's Guide
If you can't reach the recovery partition during startup, burn the recovery media.
-Jerry

How to use recovery partition for installing OS

hello,
i tried a lot to recover my os with lenove own button for system restore but it did't work and finaly i install OS XP Professional and manualy install all drivers. i must wanna say to lenove mangment that their this way is absolut more complicated then simply provide lenove customer backup cd with laptop. even when i call lenove help line for backup system cd then they demanded money for the cd eigther it must b free for lenove customer as lenove system restore button and partition whole typoligy seems to be total failur. If some one here plz give me advise what should i do with that partition of my hard drive which having system backup from lenove. i make 3 partition of my hdd with i did't remove that partition... so now i want to know that can i still use that partition for system restore or i should remove that partition to make my hdd space free
Thanx 4 reading
Mehr

I had the same problem. I hate Lenovo. I will not buy an another lenovo in my lifetime again. I paid for the OS, then when i call customer care, they ask me for money. Guys look at Dell. I had the system for 7 yrs, i had the OS that i purchased with my laptop. I am loving Dell. Lenovo , your process is wrong.

How to save Recovery Partition before RAID?

Similar Messages

Maybe you are looking for