How to save the expense in PDF in transc. PR05?

Hi,
If I access the transaction PR05 to see an user expense could the expense be save it in the PC in a PDF format?? I don't see an option over there to save an expense in PDF..
Every employee if access the ESS they can see their expenses in PDF but could I search by personnal number in the transaction PR05 and save a user expense in PDF in a local PC?
I already accesed SPRO -> Financial Accounting -> Travel Management -> Travel Expenses -> Dialog and Travel Expenses -> etc and the PDF is active.
Thanks,
Carlos

Hi Carlos
You need to check 1st if yours PR05 from is coming in HTML or PDF format while doing the simulation .
If  your expense form  is displaying in HTML format  then you can not save it.
So if  you want to change this HTML to PDF, you have to do the configuration table.
V_T702N_A  Accounting Control in Expert View.  here  you need to make change in  other settlement in
Position 4 th  to 0 .This will display based on below condition. so change it as per your need.
If you want to display it in PDF then it must be ZERO
0 = All travel expense forms in the Web Dynpro interface and the forms for the travel manager, travel expense manager, weekly report, and single-record entry in the SAP ERP system are displayed as PDF-based forms (Adobe).
1 = All travel expense forms in the Web Dynpro interface and the forms for the travel manager, travel expense manager, weekly report, and single-record entry in the SAP ERP system are displayed as ABAP lists or HTML forms. This does not apply to the travel request and travel plan forms.
2 = All travel expense forms in the Web Dynpro interface and the form for the travel manager in the SAP ERP system are displayed as PDF-based forms (Adobe). The forms for the travel expense manager, the weekly report, and single-record entry in the SAP ERP system are displayed as ABAP lists or HTML forms. This does not apply to the travel request and travel plan forms.
So  your PR05 form will diaply in PDF & save it in your PC.
Thanks
Anwar Hosaain

Similar Messages

  • How to save the output of sap script to pdf document in sap

    hi abapers
    how to save the output of sap script in sap so that can retrieve the saved document later.
    i have to save the rcia output from sap script in pdf document in sap so that it can be retrieved later
    how to use dms

    Hi deepika,
    This thread will solve ur problem OTF  -> PDF
    Regards,
    Pravin

  • I created a form for our band parents to fill out.  How are they able to save the forms as pdfs?

    I created a form for our band parents to fill out.  How are they able to save the forms as pdfs and be able to go back and view them?  I see the Save Submission-Enabled PDF on the Distribution page but there is no option when they go in to the first page of the form to save.
    Thank you very much for your help.

    If you are distributing a PDF using the save submission enabled pdf option, then respondents can save it using the Adobe Reader. They save it just like any other file - File menu -> save (or save icon on toolbar).
    Randy

  • In oracle 2.5 version report builder how to add option to generate/save the report as pdf file?

    I am working with reports of 2.5 version and i got a requirement for adding an option to save the report in pdf format. Can anybody please help me on this asap
    Thanks & Regards

    Are u sure about  the report version.
    Please do upgrade  while  even in oracle  they almost stopped for new version -Developer suite

  • How to save the output of sap script in sap so that can be retrieved later

    hi abapers
    how to save the output of sap script in sap so that can retrieve the saved document later.
    i have to save the rcia output from sap script in pdf document in sap so that it can be retrieved later
    how to use dms
    <MOVED BY MODERATOR TO THE CORRECT FORUM>
    Edited by: Alvaro Tejada Galindo on Dec 26, 2008 11:01 AM

    Hi Deepika,
    Look into this link https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/401cca81-b861-2910-ada2-f416dfb3b3fe
    Regards,
    Pravin

  • How to save the image in the form?

    As thread, how to save the image into a file from the pdf form - image box?
    I have Adobe Acrobat 9 Pro extended.

    Hi Sandy,
    Sorry for Delay.Could you please provide script code for the Button and in which event we want to add the code
    I want to Save the lot of images in the PDF. For that I kept Image field in the form.Here I am able to upload the images but those are not saved.
    If possible please share the details document.
    Please help me.
    Thanks,
    Ravi.

  • How to save an image as PDF?

    Hi,
    I need help o how to save an Image as PDF file?? is this possible?

    Under Getting Started in the welcome window click Create PDF
    Open your image
    File>Save As...PDF
    But I am finding that there are limitations on how big the image can be. I am trying to save a 20mb jpeg to pdf in acrobat and having issues. Good luck!

  • How to save a photobook as pdf or jpeg format?

    how to save a photobook as pdf or jpeg format?

    Do you mean like a multi-page PDF?  As in, one photo per page? Or something else?
    You might get what you are looking for by exploring the options in iPhoto's Print (under the File menu) and then clicking the PDF button, and then Save As PDF.
    Without knowing more details about exactly what you are wanting to do, it's hard to know what else to suggest.

  • Save the report in PDF format on the server: is it possible?

    Hi all,
    Is it possible to save the report in PDF format on the server?
    In other words, in a web application:
    1) the user requests a report
    2) the report produced in PDF format, is saved on the server, where is the Java Reporting Component
    3) the report, in PDF format, is sent to the client's user
    Thanks a lot

    PrintOutputController.export, get the byte stream, save on server.
    Sincerely,
    Ted Ueda

  • I want to use Get Panel Image in Labview 5.0.1 and need details on how to save the BMP data generated

    I am trying to generate an application that saves a copy of its front panel on completion. This is easy to do using an invoke node with Print VI to HTML but this does not work in an .exe format. I have seen elsewhere that you have to use the Get Panel Image method, but no details are supplied in LV 5.0.1 documentation of how to use the "image" data (1-D Unsigned Byte array) that is generated. I want to save this in a format that can then be read as a bitmap in any standard graphics package. Any assistance?

    Hi,
    If you'd upgrade to LV5.1 or 6 you could use the 'standard' vi's for this.
    You need a VI called "Write BMP File.vi". It's not shipped with LV5.0.1.
    This vi only uses 3 subVI's, so perhaps someone at NI can convert it and
    send it to you (sorry, I won't, it's copywrited).
    If you cannot get this VI anywhere, you'll need to figure out the BMP file
    format yourself. It's not too complicated, but still could take some days.
    Perhaps someone figured it out before LV5.1 was released.
    Regards,
    Wiebe.
    "RDK" wrote in message
    news:[email protected]..
    > I want to use Get Panel Image in Labview 5.0.1 and need details on how
    > to save the BMP data generated
    >
    > I am trying to generate an application that saves a copy
    of its front
    > panel on completion. This is easy to do using an invoke node with
    > Print VI to HTML but this does not work in an .exe format. I have seen
    > elsewhere that you have to use the Get Panel Image method, but no
    > details are supplied in LV 5.0.1 documentation of how to use the
    > "image" data (1-D Unsigned Byte array) that is generated. I want to
    > save this in a format that can then be read as a bitmap in any
    > standard graphics package. Any assistance?

  • How to send the output to PDF format in reports 6i?

    Hi,
    How to send the output to PDF format in reports 6i? I given Mode = BITMAP.
    DESTYPE = File, DESFORMAT = PDF, DESNAME = C:\x.pdf.
    Report is running fine. But PDF file not generated. I don't know what i missed. Any one can help this?
    Thanks
    Kavitha

    Hello,
    Do you get this problem only for DESFORMAT=PDF ?
    Test with :
    DESFORMAT = RTF, DESNAME = C:\x.rtf
    or
    DESFORMAT = HTMLCSS, DESNAME = C:\x.html
    does it work ?
    Check if DESNAME is modified in the reports itself.
    Regards

  • How to save a file in PDF

    Hi,
    Iam developing an application where in iam drawing some boxes using Java Graphics.I wanted to save the file as .PDF file.Is it possible to save the file as .PDF file.If so any one has any sample code?Please help me in this regard as its very important for me to do.
    Thanks in advance,
    Regards,
    Ravi

    Steve, you're amazing. Do you keep a deadbeat
    database or is your memory that good?
                             RIGGS
                   Roger.  Quit looking so damn
                   worried.  I'm fine.
                             MURTAUGH
                   Two inches higher, they would've
                   got your head.
                             RIGGS
                   Fuck that.  Two inches to the left,
                   they would've got my smokes.
         He takes out a pack, lights one up.
                             RIGGS
                   Oh, by the way:  Guy who shot me?
                             MURTAUGH
                   Yeah.
                             RIGGS
                   Same guy who shot Lloyd.
                             MURTAUGH
                   Jesus ... You sure?
                             RIGGS
                   I never forget an asshole.

  • How to save the setting in MDM import manager?

    How to save the setting in MDM import manager? After I configure all things in MDM import manager, I try to save the setting, let's say, saved map name is " Test002", and then I export this map into desktop. After that, I logon Import manager again, and import this map file, system show me the same thing that I have to configure it again, because nothing was changed, what I configured before, were all disappeared.

    Hi Alfred ,
    are You not saving this map in Import Manager ? Import Manager itslef saves the map and remember it . Exporting map is only for backup .
    Pls make changes and save the map . Exit and relogin . then see the map . It should be there . Pls let us know the result .
    - An

  • How to save the edited datagrid using array collection?

    <?xml version="1.0" encoding="utf-8"?>
    <s:View xmlns:fx="http://ns.adobe.com/mxml/2009"
                        xmlns:s="library://ns.adobe.com/flex/spark"
                        xmlns:mx="library://ns.adobe.com/flex/mx"
                        title="demo2">
              <fx:Declarations>
                        <!-- Place non-visual elements (e.g., services, value objects) here -->
              </fx:Declarations>
              <fx:Script>
                        <![CDATA[               
                                  import mx.collections.ArrayCollection;
                                  import mx.events.FlexEvent;
                                  import spark.components.gridClasses.IGridItemEditor;
                                  import spark.components.gridClasses.IGridItemRenderer;
                                  import spark.events.GridItemEditorEvent;
                                  [Bindable]
                                  private var myDP:ArrayCollection = new ArrayCollection([
                                            {label1:"Day1 ", label2:" Sub1", label3:"Sub2 ", label4:"Sub3 ", label5:"Sub4 ", label6:"Sub5 ", label7:"Sub6 "},
                                            {label1:"Day2 ", label2:" Sub1", label3:"Sub2 ", label4:"Sub3 ", label5:"Sub4 ", label6:"Sub5 ", label7:"Sub6 "},
                                            {label1:"Day3 ", label2:" Sub1", label3:"Sub2 ", label4:"Sub3 ", label5:"Sub4 ", label6:"Sub5 ", label7:"Sub6 "},
                                            {label1:"Day4 ", label2:" Sub1", label3:"Sub2 ", label4:"Sub3 ", label5:"Sub4 ", label6:"Sub5 ", label7:"Sub6 "},
                                            {label1:"Day5 ", label2:" Sub1", label3:"Sub2 ", label4:"Sub3 ", label5:"Sub4 ", label6:"Sub5 ", label7:"Sub6 "},
                                            {label1:"Day6 ", label2:" Sub1", label3:"Sub2 ", label4:"Sub3 ", label5:"Sub4 ", label6:"Sub5 ", label7:"Sub6 "}
                                  protected function myDG_gridItemEditorSessionSaveHandler(event:GridItemEditorEvent):void
                                            // TODO Auto-generated method stub
                                  protected function button1_clickHandler(event:MouseEvent):void
                                            // TODO Auto-generated method stub
                                            navigator.popView();
                                  protected function button2_clickHandler(event:MouseEvent):void
                                            // TODO Auto-generated method stub
                                            myDG.editable=false;
                                            myDP
                                  protected function myDG_exitStateHandler(event:FlexEvent):void
                                            // TODO Auto-generated method stub
                        ]]>
              </fx:Script>
              <s:DataGrid id="myDG" x="10" y="45" width="460" height="240" dataProvider="{myDP}"
                                            editable="true" exitState="myDG_exitStateHandler(event)" fontSize="11"
                                            gridItemEditorSessionSave="myDG_gridItemEditorSessionSaveHandler(even t)"
                                            rowHeight="30" variableRowHeight="true" selectionMode="singleCell" >
                        <s:columns>
                                  <s:ArrayList>
                                            <s:GridColumn dataField="label1" headerText="day" editable="false" />
                                            <s:GridColumn dataField="label2" headerText="9-10am"/>
                                            <s:GridColumn dataField="label3" headerText="10-11am"/>
                                            <s:GridColumn dataField="label4" headerText="11am-12noon"/>
                                            <s:GridColumn dataField="label5" headerText="1-2pm"/>
                                            <s:GridColumn dataField="label6" headerText="2-3pm"/>
                                            <s:GridColumn dataField="label7" headerText="3-4pm"/>            
                                  </s:ArrayList>
                        </s:columns >
              </s:DataGrid>
              <s:Button x="404" y="10" width="53" height="27" label="Back" click="button1_clickHandler(event)"
                                    fontSize="13"/>
              <s:Button x="24" y="10" width="56" height="27" label="Save" click="button2_clickHandler(event)"
                                    fontSize="14"/>
    </s:View>
    please help me with this code...i dontknow how to save the data edited in the datagrid back to my arrayollection!!!

    please help with this......

  • How to save the template with cell locking?

    Hi Gurus,
         I have successfully locked the cell by using Data validation of Excel function in BPC input schedule. But when I save and reopen it once again the data validation does not work. My target is to distribute the cell locked template to different users thru offline wizard. Can anybody let me know how to save the data validation in the template ?
    Regards,
    KumarMG

    Resolved myself

Maybe you are looking for