How to save the template with cell locking?

Hi Gurus,
I have successfully locked the cell by using Data validation of Excel function in BPC input schedule. But when I save and reopen it once again the data validation does not work. My target is to distribute the cell locked template to different users thru offline wizard. Can anybody let me know how to save the data validation in the template ?
Regards,
KumarMG

Resolved myself

Similar Messages

How to save site template with subsites..?

Hi,
I am trying to save site as template., and found that subsites are not part of that site template..
Can anybody tell me how can I save site as template with subsites.?...
Thanks,
Parag

As Paul said you can only save a single site at a time. I'm not sure specifically what you are trying to do, but it wouldn't be terribly difficult to write some code which provisions a site with specific subsites. I've seen this type of scenario
handled many times via both manual and automated processes. It all just depends on the requirements.John Ross
SharePoint Server MVP | Sr. Consultant SharePoint911:
SharePoint Consulting
Blog: http://www.sharepoint911.com/blogs/john
Twitter: @JohnRossJr
Professional SharePoint 2010 Branding and User Interface Design

What does the symbol with a lock inside the refresh key in the upper right of my iphone4s and how do I unlock it?

What does the symbol with a lock inside the refresh key in the upper right corner of my iphone4s mean and how do I unlock it?

This is all covered in the manual:
iPhone User Guide (For iOS 5.1 Software)

After i designed a website for desk top how do i save the site for cell phone

after i designed a website for desk top how do i save the site for cell phone use

I don't think you can simply save a desktop design as a cell phone design. While in Muse and in the site plan view for you website you should see three tabs near the top of the page. If you click the "Phone" tab, you will get a pop-up dialog box asking which element you would like to copy over from your desktop site (if any). You must then design the site for cell phone use. You can use the same objects, pictures, etc. from your desktop site and Muse should automatically optimize those elements for phone use. However, Muse does not automatically take a desktop design and create a cell phone design from it.
As I understand it, Muse uses user-agent detection to decide which site it wants to display to the user. You however, need to create the different versions of your site so that Muse can apply a specific design for the intended use.

How do I delete Templates? I search for the templates with finder, in library, applications, logic, project templates. But, I can't find my templates there.

How do I delet templates? I can`t find the templates with finder. I try in Libary, applications, Logic, Project templates. But, I can`t find my templates there. I find Logics templates, compose, explore and produce.

pauloman80 wrote:
User-created templates are located in username > Library > Application Support > Logic > Project Templates.
Hi
Note that in Lion OS, the User Library is hidden by default.
Use the Finder:Go Menu (hold down Option to add the User Library to the menu).
CCT

I want to use Get Panel Image in Labview 5.0.1 and need details on how to save the BMP data generated

I am trying to generate an application that saves a copy of its front panel on completion. This is easy to do using an invoke node with Print VI to HTML but this does not work in an .exe format. I have seen elsewhere that you have to use the Get Panel Image method, but no details are supplied in LV 5.0.1 documentation of how to use the "image" data (1-D Unsigned Byte array) that is generated. I want to save this in a format that can then be read as a bitmap in any standard graphics package. Any assistance?

Hi,
If you'd upgrade to LV5.1 or 6 you could use the 'standard' vi's for this.
You need a VI called "Write BMP File.vi". It's not shipped with LV5.0.1.
This vi only uses 3 subVI's, so perhaps someone at NI can convert it and
send it to you (sorry, I won't, it's copywrited).
If you cannot get this VI anywhere, you'll need to figure out the BMP file
format yourself. It's not too complicated, but still could take some days.
Perhaps someone figured it out before LV5.1 was released.
Regards,
Wiebe.
"RDK" wrote in message
news:[email protected]..
> I want to use Get Panel Image in Labview 5.0.1 and need details on how
> to save the BMP data generated
>
> I am trying to generate an application that saves a copy
of its front
> panel on completion. This is easy to do using an invoke node with
> Print VI to HTML but this does not work in an .exe format. I have seen
> elsewhere that you have to use the Get Panel Image method, but no
> details are supplied in LV 5.0.1 documentation of how to use the
> "image" data (1-D Unsigned Byte array) that is generated. I want to
> save this in a format that can then be read as a bitmap in any
> standard graphics package. Any assistance?

I started to learn HTML, and I'm using text edit and everything is going fine, when I save the file with a .html extension and open it with safari I only view the code and not the webpage that was supposed to be created.

I started to learn HTML, and I'm using text edit and everything is going fine, when I save the file with a .html extension and open it with safari I only view the code and not the webpage that was supposed to be created.

That is because you don't have a web server configured and running to serve the html page. In order to see the page in a browser you need to access it using a url similar to http://localhost/~yourUserName if you are serving the page from your user account.
Prior to Mountain Lion you could go into web sharing and turn on the web server. With Mountain Lion there is no option, other than using terminal, to turn on the web server. The web sharing menu item has been removed in Mountain Lion. Apache is still on your computer but it will take a little searching these forums or the Internet to find how to turn it on.
If you want a graphic user interface to turn on/off the Apache server you could download and install a server application like xampp, http://www.apachefriends.org/en/xampp.html. I use this and it works well.

How to save the edited datagrid using array collection?

<?xml version="1.0" encoding="utf-8"?>
<s:View xmlns:fx="http://ns.adobe.com/mxml/2009"
                    xmlns:s="library://ns.adobe.com/flex/spark"
                    xmlns:mx="library://ns.adobe.com/flex/mx"
                    title="demo2">
          <fx:Declarations>
                    
          </fx:Declarations>
          <fx:Script>
                    <![CDATA[
                              import mx.collections.ArrayCollection;
                              import mx.events.FlexEvent;
                              import spark.components.gridClasses.IGridItemEditor;
                              import spark.components.gridClasses.IGridItemRenderer;
                              import spark.events.GridItemEditorEvent;
                              [Bindable]
                              private var myDP:ArrayCollection = new ArrayCollection([
                                        {label1:"Day1 ", label2:" Sub1", label3:"Sub2 ", label4:"Sub3 ", label5:"Sub4 ", label6:"Sub5 ", label7:"Sub6 "},
                                        {label1:"Day2 ", label2:" Sub1", label3:"Sub2 ", label4:"Sub3 ", label5:"Sub4 ", label6:"Sub5 ", label7:"Sub6 "},
                                        {label1:"Day3 ", label2:" Sub1", label3:"Sub2 ", label4:"Sub3 ", label5:"Sub4 ", label6:"Sub5 ", label7:"Sub6 "},
                                        {label1:"Day4 ", label2:" Sub1", label3:"Sub2 ", label4:"Sub3 ", label5:"Sub4 ", label6:"Sub5 ", label7:"Sub6 "},
                                        {label1:"Day5 ", label2:" Sub1", label3:"Sub2 ", label4:"Sub3 ", label5:"Sub4 ", label6:"Sub5 ", label7:"Sub6 "},
                                        {label1:"Day6 ", label2:" Sub1", label3:"Sub2 ", label4:"Sub3 ", label5:"Sub4 ", label6:"Sub5 ", label7:"Sub6 "}
                              protected function myDG_gridItemEditorSessionSaveHandler(event:GridItemEditorEvent):void
                                        // TODO Auto-generated method stub
                              protected function button1_clickHandler(event:MouseEvent):void
                                        // TODO Auto-generated method stub
                                        navigator.popView();
                              protected function button2_clickHandler(event:MouseEvent):void
                                        // TODO Auto-generated method stub
                                        myDG.editable=false;
                                        myDP
                              protected function myDG_exitStateHandler(event:FlexEvent):void
                                        // TODO Auto-generated method stub
                    ]]>
          </fx:Script>
          <s:DataGrid id="myDG" x="10" y="45" width="460" height="240" dataProvider="{myDP}"
                                        editable="true" exitState="myDG_exitStateHandler(event)" fontSize="11"
                                        gridItemEditorSessionSave="myDG_gridItemEditorSessionSaveHandler(even t)"
                                        rowHeight="30" variableRowHeight="true" selectionMode="singleCell" >
                    <s:columns>
                              <s:ArrayList>
                                        <s:GridColumn dataField="label1" headerText="day" editable="false" />
                                        <s:GridColumn dataField="label2" headerText="9-10am"/>
                                        <s:GridColumn dataField="label3" headerText="10-11am"/>
                                        <s:GridColumn dataField="label4" headerText="11am-12noon"/>
                                        <s:GridColumn dataField="label5" headerText="1-2pm"/>
                                        <s:GridColumn dataField="label6" headerText="2-3pm"/>
                                        <s:GridColumn dataField="label7" headerText="3-4pm"/>
                              </s:ArrayList>
                    </s:columns >
          </s:DataGrid>
          <s:Button x="404" y="10" width="53" height="27" label="Back" click="button1_clickHandler(event)"
                                fontSize="13"/>
          <s:Button x="24" y="10" width="56" height="27" label="Save" click="button2_clickHandler(event)"
                                fontSize="14"/>
</s:View>
please help me with this code...i dontknow how to save the data edited in the datagrid back to my arrayollection!!!

please help with this......

How to save the data to sap abap using Adobe Flex

Hi Everybody......
I am new to Adobe flex with sap abap.
      How to save the data in sap abap using Adobe Flex coding is Action Script and using RFC web service.
Please give me any suggisions on that.
Thank you
Venkatesh V

Hi Venkatesh,
Try with folowing coding...
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute"
     initialize="initApp()">
     <mx:Label x="10" y="23" text="Airline" width="90" id="lblAirline"/>
     <mx:TextInput x="108" y="21" id="txtAirline"/>
     <mx:Button x="10" y="49" label="Get Data" id="btnGetData" enabled="false" click="getData()"/>
     <mx:DataGrid x="10" y="97" id="dgFlightData" dataProvider="">
     </mx:DataGrid>
       <mx:Script>
          <![CDATA[
               import mx.collections.ArrayCollection;
               import mx.rpc.AbstractOperation;
               import mx.rpc.events.FaultEvent;
               import mx.rpc.soap.LoadEvent;
               import mx.rpc.events.ResultEvent;
               import mx.rpc.soap.WebService;
               [Bindable] public var flightData:ArrayCollection;
    private var flightWS:WebService;
     private function initApp():void{
          flightWS = new WebService();
          flightWS.wsdl = "http://uscib20.wdf.sap.corp:50021/sap/bc/soap/wsdl11?services=ZGTEST&sap-client=000";
        flightWS.addEventListener(FaultEvent.FAULT,onWSError);
          flightWS.addEventListener(LoadEvent.LOAD,onWSDLLoaded);
         flightWS.addEventListener(ResultEvent.RESULT,onFlightWSGotResult);
          flightWS.loadWSDL();
private function getData():void{
          var operation:AbstractOperation = flightWS.getOperation("ZGTEST");
          var input:Object = new Object();
          input.Airline = txtAirline.text.toUpperCase();
          operation.arguments = input;
          operation.send();
     private function onWSError (event:FaultEvent):void{
     private function onWSDLLoaded(event:LoadEvent):void{
          btnGetData.enabled = true;
     private function onFlightWSGotResult(event:ResultEvent):void{
          flightData = event.result.SFLIGHT;
          ]]>
     </mx:Script>
</mx:Application>
Regards,
Vinoth

How to save the form data into adobe db?

Hi All,
How to save the form data into adobe db?
I have designed one xdp file.
Through processFormSubmission(), I got the submitted form data as Document obj.
Then I have called the workflow kickoff program.
code:
InvocationRequest request = myFactory.createInvocationRequest ("myprocessname", //Specify the long-lived process name
"invoke", //Specify the operation name
params, //Specify input values (HashMap obj)
false); //Create an asynchronous request
It successfulyy started the workflow, but the submitted form data is not saved anywhere.
And also, How get the form data from tables?
Please provide the solution for the above.
Thanks in advance.
Regards,
Saravanan G

You need to create a process variable of type IN if you want to be able to pass data to your process. Then the params parameter (HashMap) contains a list of all the IN variables with their content that you want to pass to your process. They key is the name of the variable and the value the content. That way you should get it in your process.
Now LiveCycle will create a column in the database for every process variable, so the content will be saved in the database just by creating that process variable.
Jasmin

How to save the data present in TEXT BOX?

Hi friends i am able to create a text editor in one of my screen but i want to know how to save the data when the text is entered in that text box and retrive when they open the screen?

Hi ,
Please check the format below since it is based on a working code
first you need to create a text in s010 function module...
there should be some key based on which you plan to save the text..imagine it is Purchase order then..PO+item numner is always unique.eg:0090010(900PO/item10).so in the code you can append these two and they will be unique..so you can always retrieve them,overwrite,save them anytime you need
**************data declarations
TYPES: BEGIN OF TY_EDITOR,
EDIT(254) TYPE C,
END OF TY_EDITOR.
data: int_line type table of tline with header line.
data: gw_thead like thead.
data: int_table type standard table of ty_editor.
****************fill header..from SO10 t-code..when you save you need the unique key..youfill it here and pass it in save_text function module
GW_THEAD-TDNAME = loc_nam. " unique key for the text -> our unique key to identify the text
GW_THEAD-TDID = 'ST'. " Text ID from SO10
GW_THEAD-TDSPRAS = SY-LANGU. "current language
GW_THEAD-TDOBJECT = 'ZXXX'. "name of the text object created in SO10
*To Read from Container and get data to int_table
CALL METHOD EDITOR ->GET_TEXT_AS_R3TABLE
IMPORTING
TABLE = int_table
EXCEPTIONS
ERROR_DP = 1
ERROR_CNTL_CALL_METHOD = 2
ERROR_DP_CREATE = 3
POTENTIAL_DATA_LOSS = 4
others = 5.
IF SY-SUBRC 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
loop data from int_table and save to int_line-tdline appending it.
*save the text
CALL FUNCTION 'SAVE_TEXT'
EXPORTING
HEADER = GW_THEAD
TABLES
LINES = InT_LINE
EXCEPTIONS
ID = 1
LANGUAGE = 2
NAME = 3
OBJECT = 4
OTHERS = 5.
IF SY-SUBRC 0.
ENDIF.
*To pass to Container
CALL METHOD EDITOR ->SET_TEXT
hope that the above sample with helps you solve the problem
Please check and revert,
Reward if helpful
Regards
Byju

How to Save the "Document Info" Details Action Via

I saved the "Document Info" details in illustrator manually using "Document Info Pannel". Could you please expain how to save the "Document Info" details through illustrator action.
Thanks,
Prabudass

When in the document info window of a file there is a small triangle in the top right corner from this you have fly out menus to save/delete or show metadata templates. You can use this to save groups of metadata. Once you have a bunch of groups you can quickly use this to set your info. Bridge will also allow you to append or replace metadata from these saved templates too

Dynamically built query on execution How to save the data in Object Type

Hi,
In pl/sql I am building and executing a query dynamically. How can I stored the output of the query in object type. I have defined the following object type and need to store the
output of the query in it. Here is the Object Type I have
CREATE OR REPLACE TYPE DEMO.FIRST_RECORDTYPE AS OBJECT(
pkid NUMBER,
pkname VARCHAR2(100);
pkcity VARCHAR2(100);
pkcounty VARCHAR2(100)
CREATE OR REPLACE TYPE DEMO.FIRST_RECORDTYPETAB AS TABLE OF FIRST_RECORDTYPE;Here is the query generated at runtime and is inside a LOOP
--I initialize my Object Type*
data := new FIRST_RECORDTYPETAB();
FOR some_cursor IN c_get_ids (username)
LOOP
x_context_count := x_context_count + 1;
-- here I build the query dynamically and the same query generated is
sql_query := 'SELECT pkid as pid ,pkname as pname,pkcity as pcity, pkcounty as pcounty FROM cities WHERE passed = <this value changes on every iteration of the cursor>'
-- and now I need to execute the above query but need to store the output
EXECUTE IMMEDIATE sql_query
INTO *<I need to save the out put in the Type I defined>*
END LOOP;
How can I save the output of the dynamically built query in the Object Type. As I am looping so the type can have several records.
Any help is appreciated.
Thanks

hai ,
solution for Dynamically built query on execution How to save the data in Object Type.
Step 1:(Object creation)
SQL> ED
Wrote file afiedt.buf
1 Create Or Replace Type contract_details As Object(
2 contract_number Varchar2(15),
3 contrcat_branch Varchar2(15)
4* );
SQL> /
Type created.
Step 2:(table creation with object)
SQL> Create Table contract_dtls(Id Number,contract contract_details)
2 /
Table created.
Step 3:(execution Of procedure to insert the dynamic ouput into object types):
Declare
LV_V_SQL_QUERY Varchar2(4000);
LV_N_CURSOR Integer;
LV_N_EXECUTE_CURSOR Integer;
LV_V_CONTRACT_BR Varchar2(15) := 'TNW'; -- change the branch name by making this as input parameter for a procedure or function
OV_V_CONTRACT_NUMBER Varchar2(15);
LV_V_CONTRACT_BRANCH Varchar2(15);
Begin
LV_V_SQL_QUERY := 'SELECT CONTRACT_NUMBER,CONTRACT_BRANCH FROM CC_CONTRACT_MASTER WHERE CONTRACT_BRANCH = '''||LV_V_CONTRACT_BR||'''';
LV_N_CURSOR := Dbms_Sql.open_Cursor;
Dbms_Sql.parse(LV_N_CURSOR,LV_V_SQL_QUERY,2);
Dbms_Sql.define_Column(LV_N_CURSOR,1,OV_V_CONTRACT_NUMBER,15);
Dbms_Sql.define_Column(LV_N_CURSOR,2,LV_V_CONTRACT_BRANCH,15);
LV_N_EXECUTE_CURSOR := Dbms_Sql.Execute(LV_N_CURSOR);
Loop
Exit When Dbms_Sql.fetch_Rows (LV_N_CURSOR)= 0;
Dbms_Sql.column_Value(LV_N_CURSOR,1,OV_V_CONTRACT_NUMBER);
Dbms_Sql.column_Value(LV_N_CURSOR,2,LV_V_CONTRACT_BRANCH);
Dbms_Output.put_Line('CONTRACT_BRANCH--'||LV_V_CONTRACT_BRANCH);
Dbms_Output.put_Line('CONTRACT_NUMBER--'||OV_V_CONTRACT_NUMBER);
INSERT INTO contract_dtls VALUES(1,CONTRACT_DETAILS(OV_V_CONTRACT_NUMBER,LV_V_CONTRACT_BRANCH));
End Loop;
Dbms_Sql.close_Cursor (LV_N_CURSOR);
COMMIT;
Exception
When Others Then
Dbms_Output.put_Line('SQLERRM--'||Sqlerrm);
Dbms_Output.put_Line('SQLERRM--'||Sqlcode);
End;
step 4:check the values are inseted in the object included table
SELECT * FROM contract_dtls;
Regards
C.karukkuvel

How to save a BufferredImage with RGB color encoded JPEG file.

Hi, I am new to Java Imaging API programming.
When I try to write a BufferredImage using following code -
BufferedImage output = new BufferedImage (width, height, BufferedImage.TYPE_INT_ARGB);
// Save
File outputFile = new File("image.jpeg");
ImageIO.write(output, "jpeg", outputFile);
It seems that myfile.jpg have CMYK color encoding, Can someone tell me how can I save the BufferredImage with RGB color encoding.
Thanks,
Sanjay Ujjainkar

how to format the text ?
i have format ted the text but it seems not work!
Message was edited by:
Enjoyfans

How to save a png with a straight or fat alpha?

Long story short, work in broadcast and a new piece of gear prefers png files. I know how to save png's with a transparency, that's not the problem. What I don't know how to do or if it's possible is to save them with a straight or fat alpha. Right now we feather or extend the edges out past the alpha of say a logo and save it as a tif, psd or .tga. That way once it's keyed over video or whatever, the edges look good, no black bad edging.... this makes sense, probably not explaining it very well. But switching to png files I have no idea how to make a straight or fat alpha since it sees transparency. I mean if I feathered out the edges, a png will see that correct, since there's no alpha??
I hope this makes sense ?

Chris, this is probably the answer I seek "PNG always saves with straight color - that's how the PNG spec defines it."
I admit my explanation was a bit weak and I understand PNG only supports transparency, which is not an alpha, and the apps aren't treating them wrong....I just couldn't formulate an intelligent question and explain it, my bad.
After thinking about it I don't think using a PNG will work. RIght now for broadcast gear/applications if we don't fill the transparent and semi-transparent areas of an image with the colored part of the image, we usually end up getting a dirty key/matte or a lot of fringing. So when using a .tif or .tga that reads an actuall alpha, we can fix the issue by doing what I described. In fact we use a quick little plugin from flaming Pear called "Solidifty" to speed up the process http://www.flamingpear.com/download.html . With that said, I know we can't do the same steps with a png because it only sees transparency, but I guess I was wondering if there was a work-around or a trick to fix that issue. I could be wong, but doesn't a png save with white ?
But again, as I thought about it, I think i'm asking for something it's not meant to do, but I thought I'd ask anyway.
Thanks Chris, does this make more sense or more confusing? The bottom-line is I don't think it will work.

How to save the template with cell locking?

Similar Messages

Maybe you are looking for