How to save toll free no starts with 1800?

Hi, today I came in front of a strange problem(bug) of IOS7. I am from India & here all the toll free no starts with 1800. I can call my bank'a (Axis Bank) toll free no (1800 233 5577) from my iphone directly but whenever I am saving the no in my iphone it automatically converts the no into +1 (800) 233 5577; which is an US no & the call could not be processed. Those toll free no doesn't work if u add '0' or India's country code '+91' at the beginning. How to save the no where I can make the call directly from the contacts.

Hi Debdut,
I jus found an answer in another thread. Re-posting in case if you are trying like me still!
Just go to Settings -> Phone -> Dial Assist and disable it!
This was a feature introduced from iOS6
This solves the issues altogether!
Cheers!

Similar Messages

I got one India toll free number starting 1800 can I call to that number using my Skype account

I got one India toll free number starting 1800 . Is it possible for me to make call to that number using my Skype account ?

If it does not work, I do not believe it is supported. According to the Skype FAQ only these countries are currently supported (with no timeline for other countries): https://support.skype.com/en/faq/FA24 Viewing the Pay as you go rates for India, India toll-free is not listed while other countries that are supported are listed. IndiaCalling - per minute 1excl. VATIndia1.5¢India - Ahmedabad1.5¢India - Bangalore1.5¢India - Hyderabad1.5¢India - Madras1.5¢India - Mobile1.5¢India - New Delhi1.5¢ FranceCalling - per minute 1excl. VATFrance22.3¢France - 089135¢France - 089245¢France - 089345.5¢France - Mobile4¢France - Paris22.3¢France - Shared Cost22¢France - Toll Free30¢

I got one India toll free number starting 1800 ca...

I got one India toll free number starting 1800 . Is it possible for me to make call to that number using my Skype account ?

If it does not work, I do not believe it is supported. According to the Skype FAQ only these countries are currently supported (with no timeline for other countries):
https://support.skype.com/en/faq/FA24
Viewing the Pay as you go rates for India, India toll-free is not listed while other countries that are supported are listed.
India
Calling - per minute 1
excl. VAT
India
1.5¢
India - Ahmedabad
1.5¢
India - Bangalore
1.5¢
India - Hyderabad
1.5¢
India - Madras
1.5¢
India - Mobile
1.5¢
India - New Delhi
1.5¢
France
Calling - per minute 1
excl. VAT
France2
2.3¢
France - 0891
35¢
France - 0892
45¢
France - 0893
45.5¢
France - Mobile
4¢
France - Paris2
2.3¢
France - Shared Cost
22¢
France - Toll Free3
0¢

How do I number pages consecutively starting with a number other than 1?

In Pages, how do I number pages consecutively starting with a number other than 1?

Inspector > Document > Section > Page Numbering: click on the dropdown menu

How to identify toll free numbers in CUCM

Hi
I am new to this Cisco VOIP system.
My Company has many toll free numbers. I need to know where can I find the toll free number details. I had a request today to alter few settings in them. But I dont know what to do and where to do.
Eg : 800326xxxx is the number. Request is - When people call in, they have to press 1 for billing and 2 for sales and 3 for enquiry and 4 for voice mail.
How do I go for it. Where should I start.
Again As I am new, I really appreciate if someone could explain how to identify these toll free numbers in this cisco system and help me in this request with simple steps and simple english. THanks.
Deva

Usually the toll free number resides at the service provider and they just translate that number into one of your DIDs. You can either look through documentation or call the service provider to ask which 1800 numbers map to which DIDs. From there it sounds like you'll need to investigate call handlers in your voicemail system correlated to that DID.

Only save queries if name starts with Y

Hello,
How can security be configured so that users can only save queries whose Technical names start with Y?
What authorizations are required and what values should be assigned?
Thanks,
Nick

Hello Jin,
We are on BW 3.5.
Here is the complete set of authorizations assigned to my test user. What I want is for this user to only be able to create queries if they choose to save them with a name starting with Y.
Currently (with the authorization specified below) they can save queries that start with any letter. When I save a query with the description and Technical name of: DELETE_VG15 it gives me two messages for "Authorization check". The first says "You do not have authorization for change" and the second message says: "Query (InfoCube ) was saved" So it does end up saving even though the name provided doesn't conform to what I want in the authorizations.
Hopefully you can help me fill in what is wrong, maybe copy what i have and repost with the values you are using.
S_RFC
Activity: 16
Name of RFC to be protected: *
Type of RFC to be protected: *
S_RS_COMP
Activity: 01
InfoArea: *
InfoCube: *
Name (ID) of a reporting component: Y*
Type of a reporting component: QVW, REP
S_RS_COMP1
Activity: 02
Name (ID) of a reporting Component: Y*
Type of a reporting component: QVW, REP
Owner (Person Responsible) for: *
S_RS_ICUBE
Activity: 03
InfoCube SubObject: *
InfoArea: *
InfoCube: *
I Just found this one as well, and it may be the problem:
S_RS_COMP
Activity: *
InfoArea: *
InfoCube: Z_COPA
Name (ID) of a reporting Component: *
Type of a reporting component: QVW, REP
Thanks!
Nick
Message was edited by:
Nick Bertz

How to create a DN that starts with cn instead of uid

I installed the new version of the directory server 5.0 and converted all dn's. All my DN's starts with the cn, but we I now enter new entries using the iPlanet console they all start with uid again. How can I configure the console so that when I enter a new entry, his dn starts with the cn instead of with the dn.
THX

I had the same problem. To fix it, I performed the following steps:
* Open the Directory Server
* Select the Directory tab
* Select NetscapeRoot
* Select the domain
* Select Global Preferences
* Select Common from the right-hand panel
* Change nsuniqueattribute and nsuserrdncomponent from uid to cn
* Save the changes
* Logout of Console
* Re-start the Directory Server and the Administration Server
This worked for me.
As a note, when you look at the Advanced properties before you complete adding the user, uid will still be shown as the RDN. Ignore this. After you complete adding the user, view the Advanced properties again. The RDN will use cn.
Hope this helps.

How to save my Windows 7 starter copy?

Dear Friends,
i have just bought Toshiba Nb205-230 netbook loaded with windows 7 starter. I want to ask how to save such version so if it was damaged ir may netbook affected by a virus or otherwise, I can restore that version?
Hope to hear from you soon

Look in your User's Guide to see how to do that. All of the information you need is in that USer's GUide.
The User's Guide is found on your hard drive in Adobe Acrobat Format and can be downloaded from the Product Support Link at the top of this page.
If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time.

How to debug standard report that starts with a transaction?

I want to run a report in debug mode. The report name is RFFMEPGAX, which
is normally run using transaction FMRP_RFFMEP1AX.
I want to start the transaction, fill in the form with the values I need, then
hopefully the report code pops up in a debug window......
Is there a way to do this? I know how to open the debugger, but have not
yet figured out a way to get the initial transaction to open in debug mode.

If the transaction starts with a pop-up message, you can create a text file with this...
[System]
Name=R/3
Client=
Description=
[User]
Name=
Language=
Password=
[Function]
Command=/H
Title=Title
Type=SystemCommand
Name it Debug and just drag it to the pop-up window...The debugger is going to start after a single Enter button...
Greetings,
Blag.

How to replace a substring that starts with and end with another substring?

Hi,
I am trying to parse data from HTML tables. First I want to remove all useless tags like . Now, how can I remove substrings like-
*My_Data_to_parse*
I was searching for any method which replaces a substring what starts with a substring (in this case "<font") and ends with another substring (in this case ">") . Is there any method like that? Or any better solution?
Another situation like the following-
*<td align="left" height="30" width="100%">*
In this case I want to remove all the height, align , width etc and make it as simple as "<td>". How can I do that?
Finally, all I am trying to do just to parse data from the tables in a html file. Is there any parser API or library to help me do that? Or to bring the data down to array from the tables based on table structure? Please suggest me.
Thanks in advance.

probably the best place to start is to search for the "<keyword" of all of the html keywords, then search for the location of the next ">" - this will indicate the end of the <keyword> opening tag.

How to test BPEL Process that starts with a pick consuming a JMS message

Hi,
We are using App Server v 10.1.3.3.0 and attempting to test a BPEL process which starts with a pick operation which is awaiting a JMS message on a specific queue.
We are using the Oracle JMS adapter to achieve this.
Is there any way in which this particular configuration can be easily tested using the BPEL testing framework? I have problems when I write the first initiate XML statement in my test case (stack trace below)
<2011-01-27 10:23:47,028> <ERROR> <ProvisioningInterface.collaxa.cube.bpeltest> test run failed!
ORABPEL-20011
Instance initiation error.
An error occurred while launching an instance for suite "BasicTest", test "baseline.xml".
Please examine the log file for details or contact the system administrator.
at com.collaxa.cube.engine.test.BPELTestRunManager.initiate(BPELTestRunManager.java:218)
at com.collaxa.cube.ejb.impl.BPELTestBean.runSuites(BPELTestBean.java:625)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
Unfortunately, there are no further details or any example I can see which simulate the kind of setup I have for my test.
Any help much appreciated,
Kind Regards,
Colin.

Hi,
I assume you mean the JMS example under the $OH BPEL examples area. Unfortunately, this only shows how to get a BPEL process kicked off by awaiting a JMS message - but there is no test code there! There are specific examples which show off the testing framework facilities but it appears that all the examples which use async type of interactions are in the middle of a process which is kicked off by a normal synchronous client interaction.
Any further help much appreciated.
Colin.

How to perform order by in START with connect by ?

I am using the start with function to call range of bom code. Here is the code :
SELECT level BOM_LEVEL, BCODE, bi_item_code,bi_qty
FROM OM_BOM, OM_BOM_ITEM_DETAIL, OM_ITEM_PLANT_PROPERTY_HEAD,
OM_ITEM_PLANT_PROPERTY_DETAIL, OM_ITEM
WHERE BOM_CODE = BI_BOM_CODE
AND IPH_SYS_ID = IPD_IPH_SYS_ID
AND IPH_PLANT_CODE = IPD_IPH_PLANT_CODE
AND IPH_ITEM_CODE = IPD_IPH_ITEM_CODE
AND IPH_GRADE_CODE_1 = IPD_IPH_GRADE_CODE_1
AND IPH_GRADE_CODE_2 = IPD_IPH_GRADE_CODE_2
AND IPH_ITEM_CODE = ITEM_CODE
AND NVL(ITEM_FRZ_FLAG_NUM,2) = 2
AND IPH_APP_CODE_NUM = 1
AND BOM_ITEM_CODE = IPH_ITEM_CODE
AND BOM_CODE = BI_BOM_CODE
AND NVL(BOM_DEVELOPMENT_YN_NUM, 2) = 2 commented by vellingiri.n on 22/06/2007 for enabling the development BOM
AND NVL(BOM_FRZ_FLAG_NUM, 2) = 2
AND IPD_ATTR_CODE = 'DFLT_BOM_CODE'
AND IPD_ATTR_VALUE IS NOT NULL
AND BOM_CODE = IPD_ATTR_VALUE
 CONNECT BY PRIOR BI_ITEM_CODE = BOM_ITEM_CODE
 AND PRIOR BI_LOWEST_LEVEL_YN = 'N'
--START WITH BOM_CODE = :PWH_BOM_CODE
 START WITH ( BOM_CODE >= :F_BOM AND BOM_CODE <= :T_BOM )
The range is from bom code : 95-01-001 to 95-01-002
And the output is :-
Bom Level____bom_code____Bom_item_code_________bi_qty
1____________95-01-001____95-01-001______________1
1____________95-01-001____50-23-008______________2
1____________95-01-001____50-37-001______________1
2____________50-37-001____59-01-001______________2
2____________50-37-001____4230112_______________2
3____________59-01-001____132133________________4
2____________50-23-008____232323________________5
2____________50-23-008____12-11-22_______________3
1____________95-01-002____232323________________5
2____________95-01-002____232311________________1
........ and more
My problem right now, I want to group the bom so that I will be know the total qty of each bom from the range of bom that I count. That output was shown when I run the query in sql. But when I put into report 6i, the grouping has caused the arrangement of my bom runing up and down. How can I control the bom or any group funtion that I can used so that it will group the bom before start with a new bom ???
please help me. Thanks.
Lim

You wrote that the output in SQL*Plus is correct but not in Oracle Reports 6i.
Seems to me you have a Reports issue and should ask in that forum.

How do I eliminate the "getting started with firefox" page that appears everytime I click on my home page?

Every time I click on my home page I get an additional window "Getting Started with Firefox". How do I eliminate this?
== This happened ==
Every time Firefox opened
== Immediately

See [[How to set the home page]]: Firefox supports multiple home pages separated by '|' symbols.
See also this article for more suggestions: [[Firefox has just updated tab shows each time you start Firefox]]

How to get only vendor id start with number.

Can someone help me how I can only pull vendors that have their id start with number. thanks
SELECT DISTINCT v.refvendor_id, v.vendorname, v.vendorshortname,
                v.obsolete_dt, v.corporationtype, v.incorporationstate,
                v.website, v.irsnum, a.address_id, a.addresstype,
                g.vncde2 ssn, g.vndt1 inactive, a.addressline1,
                a.addressline2, a.city, a.state, a.zipcode, a.country,
                a.telephonenum, a.faxnum, a.email, a.createdby
           FROM refvendor v, refvendoraddress a, refvendor_gf g
          WHERE v.refvendor_id = a.refvendor_id
            AND v.refvendor_id = g.refvendor_id(+)
          vendor Id
E1043
0123155
A1568
12654
desired out put
vendor id
0123155
12654

Hi,
user13258760 wrote:
thank you for the reply. what if i want to pull vendors their vendor id is only number. for example
vendor id
1ABC12
123456
123C22
59865
I just want only to see
vendor id
59865TRANSLATE can remove all the numbers.
If there's anything left after you do, then it wasn't all numbers.
AND     TRANSLATE ( NVL (vendor_id, '?')
            , 'x0123456789'
            , 'x'
            )     IS NULL

How to get Java3d applets to start with JNLPAppletLauncher on MacOS?

My Java3d applets start like they should with JNLPAppletLauncher on Windows, but they don't on MacOS. How can I get them to start like they should on MacOS? You can see my Java3d applets here:
http://astral.mobile-visuals.com/3d_visuals.php
I included the JAR's for MacOS in the applet code. Here is the code that I use:
<applet code="org.jdesktop.applet.util.JNLPAppletLauncher"
width=100%
height=98%
archive="astrals.jar,
http://download.java.net/media/applet-launcher/applet-launcher.jar,
http://download.java.net/media/java3d/webstart/release/j3d/latest/j3dcore.jar,
http://download.java.net/media/java3d/webstart/release/j3d/latest/j3dutils.jar,
http://download.java.net/media/jogl/builds/archive/jsr-231-webstart-current/jogl.jar,
http://download.java.net/media/gluegen/webstart/gluegen-rt.jar,
http://download.java.net/media/java3d/webstart/release/vecmath/latest/vecmath.jar">
<param name="codebase_lookup" value="false">
<param name="subapplet.classname" value="OrchideaOptM">
<param name="subapplet.displayname" value="Orchideic Morph">
<param name="jnlpNumExtensions" value="1">
<param name="jnlpExtension1" value="http://download.java.net/media/java3d/webstart/release/java3d-latest.jnlp">
<param name="progressbar" value="true">
<param name="noddraw.check" value="true">
</applet>

I read the thread that you linked. Puybaret proposed a solution there, but I assumed that it didn't work? It seems like he suggested launching as applications, but I need to launch them as applets.
It seems like the problem is that Apple ships their JRE with Java 3D pre-installed, so the end-user must uninstall Java 3D in order for Java 3D applets to work on Mac.

How to save toll free no starts with 1800?

Similar Messages

Maybe you are looking for