How to save with Webscan???

I am trying to scan with the web scan feature.  When the scan is done, the following message appears in red "Click the Save icon to save the scan on your computer."  There is no "Save" icon anywhere on the screen.  If I right click on the image or on the page, no "Save" option appears in the available menue.  Help & thanks!

 Press Ctl-Shift-S:
is the correct information, thanks
Carlo
RonTSD wrote:
Hi,
I remember an issue with Acrobat Reader X a few years back where the Save button would not be seen when scanning PDF files.  Unfortunately, I don't have the printer that used to show this issue anymore.  So the possible workarounds below are from memory.  I apologize in advance if they don't match your situation.
As I recall, the issue is that the Save button that would normally appear in Acrobat is not displayed because the preview window for the scan is too small and that version of Acrobat does not resize to display it.
You can try:
- Press Ctl-Shift-S to invoke the Save option.
- Disable the PDF preview in the Acrobat plugin.
- If you confirm that you have Acrobat Reader X installed, you could also try upgrading to a later version of Acrobat to see if that have resolves the problem.
Good luck!

Similar Messages

  • How to "save with options" for development using a different version of LV

    Hello,
    I have an application written in LV 6.0 on a different computer. I am upgrading the program on my computer also using LV 6.0 ( I also have LV 8.5).  When I try to open the file that I saved on original computer on my computer it tries to open it with verion 8.5, but I want to use 6.0. How can I modify the original program using the same and only version that is on original computer on my computer? Once modified I want to run on the original computer which only has version 6.0. Hope this is clear.
    Thanks,
    JS

    Be careful, once a VI is saved in 8.5 you can't save it back to 6.0. You'd have to go through several versions of LabVIEW to do that.
    To make sure a VI is opened in 6.0, launch LV 6.0 first and then open the VI (by double-clicking on it in explorer or via file open in LV).
    If LabVIEW is not running and you double-click a VI it will start the last LV version used.
    Hope this helps,
    Daniel

  • Is it possible for me to swap out the apple logo in the message screen saver with my company's logo If so, how? Thanks!

    Is it possible for me to swap out the apple logo in the message screen saver with my company's logo? If so, how? Thanks!

    How long will my iPod service take?
    If you choose to use the Online Service Assistant, or service via Apple Technical Support: If your iPod is not personalized, you can expect service to be completed within approximately one week from the time you send your iPod to Apple. If your iPod is personalized, you can expect service to be completed within approximately ten calendar days from the time you send your iPod to Apple.
    Attention iPod shuffle customers: Service for iPod shuffle is performed by means of an express replacement program, via Online Service Assistant or Apple Technical Support. For more details, please review the Express Replacement Service tab on the left.
    Above from:
    Apple - Support - iPod - Service FAQ
    If it is caused by a hardware problem there is nothing you can do to prevent it from recurring unless it was caused by abuse like from dropping the iPod.
    Otherwise make sure you ask apple how they fixed. it.

  • How to save a variant with dynamic selections parameters

    Anybody knows how to save a variant for an ABAP that uses a Logical database with Dynamic Selections?
    Have a look for example to the following:
    SE38 - DEMO_PROGRAM_GET - Execute - Shift F4 - Connection Number.
    How to save 0820 as Connection Number?
    Function Group SVAR seems good but FREE SELECTIONs are not easy to manage...

    Hello,
      I tried to save the variant of DEMO_PROGRAM_GET with dynamic selection field (Connection Number) filled. It gets saved without any problem. Just click 'SAVE' and enter the variant name and description.
    Thanks,
    Venu

  • How to save a pdf form with a button on Android?

    Hello can anyone inform me with the knowledge of how to save a pdf form after filling with button on an Android device?
    What code behind the button is necessary to make this work.

    It happens automatically. You don't need any code to trigger it.

  • Fill-in PDF forms and save with no error messages. How?

    I've saved a Reader Extended PDF enabling form fill-in and save, but users report error saying, "WITHOUT THE OWNER PASSWORD YOU DO NOT HAVE PERMISSION TO SAVE THIS DOCUMENT." What do I need to do enable them to fill-in and save with no errors?

    BTW, most users of this form (which was created in Adobe Acrobat v. XI on a Mac w/iOS version 10.7.5) have no problem with it. Only certain users (on Macs) have this "password required" error show up. How do I make it workable for everyone, including these Mac users?

  • How to save book in pdf tiff 300 dpi? with these steps file -print book- PDF- save PDF to folder as TIFF 300 dpi does not work

    how to save book in pdf tiff 300 dpi?
    with these steps file -print book- PDF- save PDF to folder as TIFF 300 dpi does not work

    Hi pissedadobeuser,
    Does this issue occur with any particular web page?
    Are you able to print the webpage to 'Adobe PDF' to convert it to pdf.
    Which Browser version, OS version and Acrobat version are you using?
    Regards,
    Rave

  • How to save a png with a straight or fat alpha?

    Long story short, work in broadcast and a new piece of gear prefers png files.  I know how to save png's with a transparency, that's not the problem.  What I don't know how to do or if it's possible is to save them with a straight or fat alpha.  Right now we feather or extend the edges out past the alpha of say a logo and save it as a tif, psd or .tga.  That way once it's keyed over video or whatever, the edges look good, no black bad edging.... this makes sense, probably not explaining it very well.   But switching to png files I have no idea how to make a straight or fat alpha since it sees transparency.  I mean if I feathered out the edges, a png will see that correct, since there's no alpha??
    I hope this makes sense ?

    Chris, this is probably the answer I seek "PNG always saves with straight color - that's how the PNG spec defines it." 
    I admit my explanation was a bit weak and I understand PNG only supports transparency, which is not an alpha,  and the apps aren't treating them wrong....I just couldn't formulate an intelligent question and explain it, my bad.
    After thinking about it I don't think using a PNG will work. RIght now for broadcast gear/applications if we don't fill the transparent and semi-transparent areas of an image with the colored part of the image, we usually end up getting a dirty key/matte or a lot of fringing.  So when using a .tif or .tga that reads an actuall alpha, we can fix the issue by doing what I described.  In fact we use a quick little plugin from flaming Pear called "Solidifty" to speed up the process http://www.flamingpear.com/download.html .  With that said, I know we can't do the same steps with a png because it only sees transparency, but I guess I was wondering if there was a work-around or a trick to fix that issue.  I could be wong, but doesn't a png save with white ?
    But again, as I thought about it, I think i'm asking for something it's not meant to do, but I thought I'd ask anyway.
    Thanks Chris, does this make more sense or more confusing?  The bottom-line is I don't think it will work.

  • How to save a flash with .SWF

    Hi, I have the 'Adobe Flash CS3 Professional', and I want to
    know if you could tell me how to save a flash with .SWF.
    When I want to create a new project, I can chose between nine
    types of documents, and I want to make a flash for a website. What
    type of document would you chose if you were me ?
    I can't write the name of the diferent types of documents,
    because I have this programme in Spanish.
    Can you help me ?
    Thank you

    FLA is the native source format - make your movie and then
    publish to SWF -
    you can not create an SWF initially - SWF is the
    exported/published format
    of your FLA>
    "Marti_17" <[email protected]> wrote in
    message
    news:gioa0k$otm$[email protected]..
    > Hi, I have the 'Adobe Flash CS3 Professional', and I
    want to know if you
    > could
    > tell me how to save a flash with .SWF.
    > When I want to create a new project, I can chose between
    nine types of
    > documents, and I want to make a flash for a website.
    What type of document
    > would you chose if you were me ?
    >
    > I can't write the name of the diferent types of
    documents, because I have
    > this
    > programme in Spanish.
    >
    > Can you help me ?
    > Thank you
    >
    >

  • How to save a photo with a password on a mac

    how to save a photo with a password on a mac

    http://osxdaily.com/2012/08/12/encrypt-folders-mac-os-x/
    Note: I have never tried this.
    Best.

  • How to save a graph with some parameters on it?

    hi
    my application involves analysis of data and plot a graph of analysed data, how to save graph along with analysed data in a file otherthan labview?

    Well, it sounds like you are wanting a picture of the graph, yes? If so there are two ways of getting it. First there is a VI method (Get Panel Image) that lets you get an image of the entire screen, and then there is a control method (Get Image) that lets you get an image of just the front panel object that you are interested in.
    The help file entries for either method provides added detail on how to uses these methods to save a picture of your data.
    Mike...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

  • How do I save with iLife preview??

    The first time I saved a track it asked me if I wanted to save with iLife preview and I said no. Now I have a track that I NEED to save with iLife preview and I can't figure out how! PLEASE help asap this project is due very soon.

    How do I save with iLife preview??
    turn it on in GB's prefs.

  • How to save toll free no starts with 1800?

    Hi, today I came in front of a strange problem(bug) of IOS7. I am from India &amp; here all the toll free no starts with 1800. I can call my bank'a (Axis Bank) toll free no (1800 233 5577) from my iphone directly but whenever I am saving the no in my iphone it automatically converts the no into +1 (800) 233 5577; which is an US no &amp; the call could not be processed. Those toll free no doesn't work if u add '0' or India's country code '+91' at the beginning. How to save the no where I can make the call directly from the contacts.

    Hi Debdut,
    I jus found an answer in another thread. Re-posting in case if you are trying like me still!
    Just go to Settings -> Phone -> Dial Assist and disable it!
    This was a feature introduced from iOS6
    This solves the issues altogether!
    Cheers!

  • How to save files received with iChat?

    I was in a text chat with a friend. He sent me an mp3 file, and it showed up in the chat window with the familiar play controls of Quicktime.. I was able to listen to it and everything. However, I couldn't figure out how to save the files??? All I could do was play, rewind etc...no way that I could see to save it.
    Any help you can provide?
    Thanks,
    John
    PowerMac G5 Dual 2.3   Mac OS X (10.4.2)  

    Hi John,
    You should be able to drag it from the window to the Desktop and subsequently, any folder.
    Alternatively you can set iChat to save all Chats and replay it from there.
    Or use Save As when the App that uses the files is open with the file in question.
    Ralph

  • Help with how to save/export nave to DW from Fireworks

    Hola
    I have made my first menu in FW CS5 with rollovers and a drop down, that works beautiful (to me )
    My problem is when I save it, how can I save/export to DW?
    Should I go to file/export?
    Should I go to file/image preview?
    What about the rollover images?
    Which folder should I save them in?
    Direct to DW?
    I'm lost
    My site it's already upload (the first page)
    and the menu looks ok, everything works, but If I need to modify it, I got soooooo confuse, that
    I end up deleting everything and start from scratch (not good for my sanity)
    So, I would love some help please.
    I'm new at FW CS5 but I thing that its going to help me a lot
    Thanks
    Daniel Ulysses

    Hola Linda
    Thanks a lot, I'll try it.
    I made the menu bar in FW, (my first ever) and in FW, everything looks great
    even my drop down menu, but cannot find out how to save it.
    If I need to change something, then, nothing works.
    Thanks again
    Saludos
    Daniel Ulysses

Maybe you are looking for