How to scale current output?

Hello everyone!
I have a pressure transducer that has 4-20mA output, I'm wondering if someone could tell me how to scale current. I know I can put resistor accross the output to produce voltage but I want to do it in current.
Here's my hardwares:
Cole Parmer - Pressure Transducer
Power Input: 24vdc
Output: 4-20mA
Range: 0-100 Psi
PCI-6024E (I also have PCI-6259)
SCB-68
Thanks!
KowdTek
LabVIEW 2009
One Step At A Time, Maybe Two...

Both test works just fine. I also test the input receiving a signal out of regular power supply.
This 6259 is realy flakey to me because we have another PC that has the same daq card and when I tried the code it works.
It's just too expensive to act up like this.
Thanks for your time Sam!
samantham wrote:
Hello,
Lets try testing the 6259 by creating an analog output 5 V and wiring it into an analog input channel. Another good test will be to send a 0-5 V sine wave into an analog input to check its response. All this testing in independent of the code and configurations you are already using.
Then, I would suggest testing an analog input with your code but where the signal is coming from an analog output from the 6259 rather than the sensor. I understand your code is intended to test current. So this last test would be without the 249 ohm resistor.
Let me know if the 6259 is working with these tests.
KowdTek
LabVIEW 2009
One Step At A Time, Maybe Two...

Similar Messages

How to save current output page as pdf or xls format?

hello expert,
i have make 2D line graph . now i am trying to save current output page as pdf or xls format.
how can i do this?
please reply soon
thanks in advance

I have a similar problem with Firefox on android. When saving a page as PDF, often the PDF page size isn't big enough and just shows part of the full web page. Is there any way to set the PDF page size and make it bigger,say A4 or some other size?

How to check current input/output rate on router subintenterface via SNMP?

How to check current input/output rate on router (2821, etc..) subintenterface via SNMP, like cacti monitoring system.
I cant find OID to make this with snmpwalk.
Or there is no way to check current load by this way? Only polling?
P.S. Ethernet subinterface, of course.
With great respect, S.A.

Hi,
Try to use:
1.3.6.1.4.1.9.2.2.1.1.6 - InBitRate
1.3.6.1.4.1.9.2.2.1.1.8 - OutBitRate
1.3.6.1.4.1.9.2.2.1.1.28 - ifDescription

How to change the output as text format in Apps R12.1.3

Hi All,
Currently iam trying to modify the Java Concurrent Program (FDExtractAndFormatting) in Batch Payment Process. This Program is generated in text format in 11i APPS. Now we are upgrading to R12.1.3. In R12.1.3 output is coming as PDF format. Here my requirement is how to change the output as text format in R12.1.3 also.
Please do the needful and suggest me.
Regards,
Jagadeesh

1. It is seeded java concurrent program. Some attributes are missing from 11i to R12. In 11i it is a text format.So i have to investgate on how to retrive those attributes in R12. What is the concurrent program name?
Have you tried to change the output and submit the request?
2. Once all are attributes are coming in PDF format. Client wants to open same output in text format as it is 11i (In R12 it is generated in PDF format).If the above does not help, please log a SR.
Thanks,
Hussein

How to display Current Year and Month in Drop Down list

Hi Dear friends,
I am devloping a report. It has got 2 pages--input and output(Report) page.
IN input page, user will select Month and Year from drop down list as one of the input parameters. (seperate drop down list 4 month and year)
Now, my problem is:
HOw to display current month and year by default in the dropdown list...........
I hope my question is clear.
Please help.
Regards,
ASh

NO da,
it is not working.
First i tired with for-loop. I initialized variable "i" to -2 (i=-2) I would get the year drop down list from 2003 but, by default 2003 would come.
So, i posted the question.
I tried your code. It is giving following error.
A Servlet Exception Has Occurred
org.apache.jasper.JasperException: Unable to compile class for JSP
An error occured between lines: 122 and 127 in the jsp file: /test/inpt.jsp
Generated servlet error:
C:\Program Files\Apache Tomcat 4.0\work\localhost\general\test\inpt$jsp.java:182: Invalid type expression.
first.set(Calendar.YEAR, 2003)
^
An error occured between lines: 127 and 131 in the jsp file: /test/inpt.jsp
Generated servlet error:
C:\Program Files\Apache Tomcat 4.0\work\localhost\general\test\inpt$jsp.java:186: Invalid declaration.
out.write("\r\n \r\nYear : \r\n \r\n"); ^ An error occured between lines: 198 and 203 in the jsp file: /test/inpt.jsp Generated servlet error: C:\Program Files\Apache Tomcat 4.0\work\localhost\general\test\inpt$jsp.java:282: Invalid type expression. first1.set(Calendar.YEAR, 2003) ^ An error occured between lines: 203 and 207 in the jsp file: /test/inpt.jsp Generated servlet error: C:\Program Files\Apache Tomcat 4.0\work\localhost\general\test\inpt$jsp.java:286: Invalid declaration. out.write("\r\n \r\nYear :\r\n \r\n");
^
4 errors
Pls. Help.
Regards,
Ashu

How to scale down number of pages in ps files

I am having ps files that are havings 4 to 8 pages per file. Each page may contain just 5-6 lines and therefore though the content in total is not too much but there is unnecessay paper wastage.
Is it possible to make some changes in code inside ps files throgh notepad so that the content may be restricted to lesser number of pages. I am having programing skill in vfp,need guidance that what changes i need to do in ps script and where.
my sample ps file can be downloaded from
https://www.dropbox.com/s/l9n3juzltlajki2/1010568351.ps
Code is also replicated here
%!PS-Adobe-3.0
%Creator: iECCM
%Version: 0.1
%%Pages: 4
/d{def}bind def/b{bind d}bind d/X1 0 d/Y1 0 d/SG{setgray}b/g{gsave}b/l1{rlineto}b/m{moveto}b/n{newpath}b/o{closepath}b/r{lineto}b/s{s how}b/c{clip}b/z{stroke}b
/A{n arc}b/B{0 SG}b/C1{n m curveto}b/D 0 d/E{0.78 SG}b/F{findfont exch scalefont setfont}b/G{grestore}b/H1{n 0 5 Y1 {0 exch m X1 0 l1} for z}b
/J{rectclip}b/K{0.79 SG}b/L{n m r z}b/M{0 0 m}b/N{0.80 SG}b/O{rotate}b/P{setlinecap}b/Q{setrgbcolor}b/R{n 4 -2 roll m dup 0 exch l1 exch 0 l1 neg 0 exch l1 o}b
/S{[] 0 h}b/T{translate}b/U1{showpage}b/V1{n 0 5 X1 {0 m 0 Y1 l1} for z}b/W1{1 SG}b/w{m s}b
/a{stringwidth}b/v{rmoveto}b/w1{setlinewidth}b/h{setdash}b/wc{w1 Q}b
/t{D arct}b
/u{a exch currentpoint 3 -1 roll dup neg I 10 div neg v 0 l1 I 20 div w1 z m}b
/st{a exch currentpoint 3 -1 roll dup neg I 3 div v 0 l1 I 20 div w1 z m}b
/us{a exch currentpoint 2 copy 5 -1 roll dup dup neg I 3 div v 0 l1 3 1 roll m dup neg I 10 div neg v 0 l1 I 20 div w1 z m}b
/u1{dup a pop exch s currentpoint 3 -1 roll dup neg I 10 div neg v 0 l1 I 20 div w1 z m}b
/st1{dup a pop exch s currentpoint 3 -1 roll dup neg I 3 div v 0 l1 I 20 div w1 z m}b
/us1{dup a pop exch s currentpoint 2 copy 5 -1 roll dup dup neg I 3 div v 0 l1 3 1 roll m dup neg I 10 div neg v 0 l1 I 20 div w1 z m}b
/x{m dup a exch neg exch v s}b/y{m dup a exch 2 div neg exch v s}b/e{wc z}b/f{g fill G}b
/wu{m dup s}b/xu{m dup dup a exch neg exch v s}b/yu{m dup dup a exch 2 div neg exch v s}b
/i{n rectfill}b/j{2 setlinejoin}b/k{n rectstroke}b
/ML{m l1}b/U{/H H V sub d}b/V 0 d/W{H w}b/X{H x}b/Y{H y}b/RMS11{T O M s O T}b
/BC{Q a pop currentpoint I 4 div sub 2 index I i G pop s}b%%EndProlog
%%Page: 1 1
<</Duplex false /Tumble false /ManualFeed false /MediaPosition 0>> setpagedevice
/Fn1{d I/Arial-Bold F}b/F1{/I 8.0 Fn1}b
F1 (229.00)513 612 w
1 w1 2 P 385 601 188 -406 k
g n
G
g n
/Fn2{d I/Arial F}b/F2{/I 8.0 Fn2}b
F2 B (One Time Charges)387 547 w
G
0 P 427 152 161 -50 k
24 601 360 -406 k
7 152 141 -50 k
183.16 135.36 1.44 -19.67 i
185.31 135.36 0.72 -19.67 i
187.47 135.36 2.15 -19.67 i
191.06 135.36 1.44 -19.67 i
193.93 135.36 0.72 -19.67 i
196.81 135.36 0.72 -19.67 i
198.96 135.36 1.44 -19.67 i
201.84 135.36 0.72 -19.67 i
204.71 135.36 0.72 -19.67 i
206.86 135.36 2.15 -19.67 i
211.17 135.36 0.72 -19.67 i
212.61 135.36 1.44 -19.67 i
214.76 135.36 0.72 -19.67 i
216.20 135.36 2.87 -19.67 i
220.51 135.36 0.72 -19.67 i
222.67 135.36 1.44 -19.67 i
224.82 135.36 2.15 -19.67 i
227.69 135.36 0.72 -19.67 i
230.57 135.36 0.72 -19.67 i
232.72 135.36 0.72 -19.67 i
236.31 135.36 1.44 -19.67 i
238.47 135.36 1.44 -19.67 i
242.06 135.36 2.15 -19.67 i
244.93 135.36 0.72 -19.67 i
246.37 135.36 1.44 -19.67 i
g n
F2 B (+)307 625 y
G
g n
F2 B (-)108 625 y
G
g n
/F3{/I 12.0 Fn1}b
F3 B (BHARAT SANCHAR NIGAM LTD)284 140 y
G
2 P 497 648 72 -43 k
g n
F1 B (Amount Payable )533 640 y
F1 B ($Rounded Up$)533 631 y
G
0 P 7 102 581 -83 k
g n
F2 B (Name & Address of the Customer)27 760 w
G
g n
F1 B (Counter Foil)494 174 w
G
[3 1] 0 h 594 184 0 184 L S
574 76 502 76 L
446 76 374 76 L
g n
/F4{/I 7.0 Fn2}b
F4 B (Diners)513 60 w
G
g n
F4 B (Masters)460 60 w
G
g n
F4 B (Visa)420 60 w
G
355 45 228 45 L
575 45 459 45 L
394 59 254 59 L
g n
F4 B (Card Holder's Name)367 45 w
G
181 59 91 59 L
g n
F4 B (Signature)184 45 w
G
g n
F4 B (Please make crossed Cheque/DD/Pay order for Amount Payable $Rounded Up$ in favour of AO $Cash$,BSNL, INDORE )13 32 w
G
g n
F4 B (Expiry Date)16 45 w
G
g n
F4 B (Against Card no.)186 61 w
G
g n
F4 B (Please Charge Rs.)16 60 w
G
192 76 86 76 L
g n
F4 B (Branch)474 76 w
G
g n
F4 B (Bank)350 76 w
G
418 101 12 -9 k
g n
F4 B (Cheque/DD)228 93 w
G
g n
F4 B (E-payment)437 93 w
G
g n
F4 B (Credit / Debit Card)323 93 w
G
g n
F4 B (Dated)224 76 w
G
g n
F4 B (Cheque/DD No.)16 76 w
G
g n
F4 B (Cash)154 93 y
G
g n
F4 B (Mode of payment)16 93 w
G
401 68 12 -9 k
124 101 12 -9 k
208 101 12 -9 k
302 101 12 -9 k
441 68 12 -9 k
496 68 12 -9 k
82 52 8 -8 k
105 52 8 -8 k
113 52 8 -8 k
89 52 8 -8 k
121 52 8 -8 k
129 52 8 -8 k
316 83 8 -8 k
309 83 8 -8 k
301 83 8 -8 k
293 83 8 -8 k
280 83 8 -8 k
272 83 8 -8 k
260 83 8 -8 k
252 83 8 -8 k
2 P 26 648 72 -43 k
g n
F2 B (Previous Balance)62 640 y
G
g n
F2 B (=)488 625 y
G
g n
F2 B (+)208 625 y
G
126 649 72 -43 k
g n
F2 B (Last Payment)162 641 y
G
317 648 72 -43 k
g n
F2 B (Current Charges)353 640 y
G
g n
F2 B (Usage Charges)387 530 w
G
g n
F2 B (Tax)387 499 w
G
g n
F2 B (Discount)387 515 w
G
g n
/F5{/I 9.0 Fn1}b
F5 B (Summary of )389 589 w
F5 B (Current Charges)389 579 w
G
g n
F5 B (Amount $Rs.$)558 589 x
G
g n
F5 B (Total Charges)390 478 w
G
0 P 21 188 9 181 L
9 188 21 181 L
2 P 220 648 72 -43 k
g n
F2 B (Adjustments)256 640 y
G
0 P 97 623 25 623 L
198 623 126 623 L
292 623 220 623 L
389 623 316 623 L
569 623 497 623 L
(ANNIE BESANT SCHOOL NARAYANDAS)28 748 w
(SHIKSHA PRASAR SAMITI)28 739 w
(ANNIE BESANT SCHOOL PRECA ANNAPURNNA MANDIR ROAD INDORE)28 730 w
(MADHYA PRADESH)28 721 w
(452009.0)28 712 w
(India)28 703 w
F5 (229.67)562 477 x
F2 (160.00)144 611 w
(0.00)246 611 w
(229.67)340 611 w
(0.00)561 547 x
(149.00)562 562 x
(441.40)562 530 x
(25.27)562 498 x
(159.20)39 611 w
g n
F2 B (Deposit 3010.00)28 670 w
G
g n
F4 B (Amex)559 60 w
G
542 68 12 -9 k
g n
F1 B (Telephone Bill)281 773 y
G
g n
F4 B (Note: Post Offices / Banks to accept Bills against Account Number on or before Due Date only)14 20 w
G
g n
/F6{/I 6.0 Fn1}b
F6 B (E & OE)328 188 w
G
459 152 135 152 L
/F7{/I 10.0 Fn2}b
F7 (Indore Telecom District)283 155 y
g n
F5 B (Account Summary)28 656 w
G
E 386 454 181 -9 i
/F8{/I 7.3 Fn1}b
F8 B (Tax Details)389 446 w
(Description)389 437 w
(Tax Rate)483 437 w
(Amount $Rs.$)565 437 x
/F9{/I 7.3 Fn2}b
F9 (Service Tax)389 427 w
(12.00%)483 427 w
(24.53)565 427 x
(Education Cess)389 417 w
(0.24%)483 417 w
(0.49)565 417 x
(Higher Edu. Cess)389 407 w
(0.12%)483 407 w
(0.25)565 407 x
570 463 382 463 L
433.12 44.86 1.44 -25.97 i
435.27 44.86 0.72 -25.97 i
437.43 44.86 2.15 -25.97 i
441.02 44.86 1.44 -25.97 i
443.89 44.86 1.44 -25.97 i
446.05 44.86 1.44 -25.97 i
448.92 44.86 1.44 -25.97 i
451.79 44.86 1.44 -25.97 i
453.95 44.86 1.44 -25.97 i
456.82 44.86 0.72 -25.97 i
459.70 44.86 0.72 -25.97 i
461.85 44.86 1.44 -25.97 i
464.72 44.86 0.72 -25.97 i
468.32 44.86 0.72 -25.97 i
470.47 44.86 1.44 -25.97 i
472.62 44.86 0.72 -25.97 i
475.50 44.86 0.72 -25.97 i
478.37 44.86 1.44 -25.97 i
480.53 44.86 1.44 -25.97 i
483.40 44.86 0.72 -25.97 i
486.27 44.86 0.72 -25.97 i
488.43 44.86 1.44 -25.97 i
492.02 44.86 0.72 -25.97 i
493.45 44.86 2.15 -25.97 i
496.33 44.86 0.72 -25.97 i
497.76 44.86 0.72 -25.97 i
499.20 44.86 2.87 -25.97 i
504.23 44.86 1.44 -25.97 i
507.10 44.86 1.44 -25.97 i
509.26 44.86 1.44 -25.97 i
512.13 44.86 1.44 -25.97 i
515 44.86 2.15 -25.97 i
517.88 44.86 0.72 -25.97 i
520.03 44.86 2.15 -25.97 i
523.62 44.86 1.44 -25.97 i
526.50 44.86 0.72 -25.97 i
527.93 44.86 2.15 -25.97 i
530.81 44.86 0.72 -25.97 i
532.24 44.86 2.87 -25.97 i
535.83 44.86 1.44 -25.97 i
539.42 44.86 2.15 -25.97 i
542.30 44.86 0.72 -25.97 i
543.73 44.86 1.44 -25.97 i
g n
F9 B (For bank use only)415 13 w
G
493 101 12 -9 k
g n
F9 B (EFT)512 93 w
G
g n
F2 B (Customer ID 1010404461)392 759 w
G
g n
F1 B (Account Number 1010568351)392 744 w
G
g n
F2 B (Invoice Number 10105683510030)392 730 w
G
g n
F2 B (Invoice Date 05/09/2012)392 715 w
G
g n
F2 B (Invoice Period 01/08/2012 to 31/08/2012)392 701 w
G
g n
F1 B (Due Date 27/09/2012)392 687 w
G
g n
F2 B (Customer Type INDIVIDUAL)392 672 w
G
g n
F4 B (This is a Computer generated Bill and hence )476 209 y
F4 B (does not require any Signature.)476 201 y
G
g n
F1 B (Due Date: 27/09/2012)14 109 w
G
g n
F2 B (Invoice No.: 10105683510030)14 140 w
G
g n
F1 B (Amount Due : 229.00)435 109 w
G
g n
F2 B (Account No.: 1010568351)435 140 w
G
g n
F2 B (Invoice Date: 05/09/2012)14 124 w
G
g n
F5 B (Accounts Officer $TR$)478 221 y
G
g n
F2 B (Recurring Charges)387 562 w
G
577 432 T M 270 O g n
M -270 O -577 -432 T
577 432 T M 270 O F2 B (PAN Number AABCB5576G)-68 -3 w
G
M -270 O -577 -432 T
F2 (-386.00)562 515 x
2 P 408 650 72 -43 k
g n
F2 B (Account Balance)445 641 y
G
0 P 480 625 408 625 L
g n
F2 B (=)398 624 y
G
(228.87)429 614 w
g n
/F10{/I 7.0 Fn1}b
F10 B (Dear Customer,)394 382 w
F10 B ( Henceforth, the invoices $Bills$ shall not be )394 374 w
F10 B (printed / dispatched if the total dues are less )394 366 w
F10 B (than Rs. 100/- and the amount due shall be )394 358 w
F10 B (included in the next bill.)394 350 w
F10 B ( Kindly pay bill amount in whole rupee and )394 342 w
F10 B (not in fraction of a rupee.)394 334 w
G
g g n
/F15{/I 7.5 Fn2}b
F15 B (of 4)525 13 w
G
G
g n
/F11{/I 7.2 Fn2}b
F11 B (Page 1)495 13 w
G
N 26 586 353 -8 i
F8 B (Payment Details)28 578 w
(Description)28 571 w
(Date)146 571 w
(Amount$Rs.$)377 571 x
F9 (Payments)28 562 w
(23/08/12)146 562 w
(160.00)377 562 x
F2 (0731-2484034)475 659 w
g n
F2 B (Phone Number)392 660 w
G
(0731-2484034)484 125 w
g n
F2 B (Phone No.:)435 124 w
G
13 403 T M 90 O g n
M -90 O -13 -403 T
13 403 T M 90 O F2 B ( SERVICE TAX REG. NUMBER : AABCB5576GSD733)-141 -2 w
G
M -90 O -13 -403 T
U1
%%Page: 2 2
<</Duplex true /Tumble false /ManualFeed false /MediaPosition 1>> setpagedevice
g n
/Fn3{d I/ArialBlack F}b/F12{/I 15.0 Fn3}b
F12 B (BHARAT SANCHAR NIGAM LIMITED)301 805 y
G
1 w1 594 774 2 774 L
g n
F2 B (Account Number 1010568351)13 789 w
G
g n
F2 B (Invoice Number 10105683510030)580 789 x
G
g n
F2 B (Invoice Date 05/09/2012)229 789 w
G
g n
/F13{/I 7.4 Fn2}b
F13 B (Page 2)496 16 w
G
g g n
/F15{/I 7.5 Fn2}b
F15 B (of 4)532 16 w
G
G
N 36 766 534 -8 i
F8 B (Recurring Charges)38 759 w
(Product)38 749 w
(Plan)195 749 w
(Period)352 749 w
(Qty)442 749 x
(Rate)481 749 x
(Charges)568 749 x
F9 (DISCOUNT)38 737 w
(LO-KAR-LO-BAAT-OTHER)195 737 w
(01/08/12 to 31/08/12)352 737 w
(NA)442 737 x
(NA)481 737 x
(149.00)568 737 x
F8 (Total Charges $Rs.$)38 726 w
(149.00)568 726 x
N 36 715 534 -8 i
B (Usage Charges)38 708 w
(Phone Calls)38 699 w
(Units)258 699 w
(Duration/Volume)321 699 w
(Gross Amt)443 699 x
(Discount)505 699 x
(Net Amt)568 699 x
F9 (Local Cellular)38 688 w
(361)258 687 w
(04:35:40)321 687 w
(361.00)443 687 x
(21.00)505 687 x
(340.000)568 687 x
(Local LL BSNL)38 676 w
(13)258 675 w
(00:10:39)321 675 w
(13.00)443 675 x
(13.00)505 675 x
(0.000)568 675 x
(Local LL Other Operator)38 664 w
(23)258 663 w
(00:17:55)321 663 w
(23.00)443 663 x
(0.00)505 663 x
(23.000)568 663 x
(Special Number Band 8)38 652 w
(3)258 652 w
(00:02:06)321 652 w
(0.00)443 652 x
(0.00)505 652 x
(0.000)568 652 x
(STD Cellular)38 640 w
(40)258 640 w
(00:35:09)321 640 w
(40.00)443 640 x
(0.00)505 640 x
(40.000)568 640 x
(STD Intra Circle GT50 BSNL)38 629 w
(1)258 628 w
(00:01:49)321 628 w
(1.00)443 628 x
(1.00)505 628 x
(0.000)568 628 x
(STD Intra Circle LT50 BSNL)38 617 w
(1)258 616 w
(00:00:24)321 616 w
(1.00)443 616 x
(1.00)505 616 x
(0.000)568 616 x
F8 (Total Charges $Rs.$)38 604 w
(439.00)443 604 x
(36.00)505 604 x
(403.00)568 604 x
/Fn4{d I/Arial-Italic F}b/F14{/I 6.3 Fn4}b
F14 (For BB 1 Unit = 1 KB)38 595 w
N 36 586 534 -8 i
F8 B (Discounts)38 579 w
(Discount Type)38 570 w
(Period)258 570 w
(Discounts)568 570 x
F9 (LL-FREE-CALLS-350-1)38 558 w
(01/08/12 to 31/08/12)258 558 w
(-350.00)568 558 x
(LO-KAR-LO-BAAT)38 546 w
(01/08/12 to 31/08/12)258 546 w
(0.00 - 36.00 [email protected]%)38 534 w
(-36.00)568 534 x
F8 (Total Discounts $Rs.$)38 523 w
(-386.00)568 523 x
g n
F2 B (Plan LO-KAR-LO-BAAT-OTHER)13 775 w
G
g n
F2 B (Phone Number / UserName 0731-2484034)580 775 x
G
U1
%%Page: 3 3
g n
F12 B (BHARAT SANCHAR NIGAM LIMITED)301 805 y
G
1 w1 594 774 2 774 L
g n
F2 B (Account Number 1010568351)13 789 w
G
g n
F2 B (Invoice Number 10105683510030)580 789 x
G
g n
F2 B (Invoice Date 05/09/2012)229 789 w
G
g n
F13 B (Page 3)496 16 w
G
g g n
/F15{/I 7.5 Fn2}b
F15 B (of 4)532 16 w
G
G
N 36 766 534 -8 i
F8 B (Usage Charges)38 759 w
(Phone Calls)38 749 w
(Units)258 749 w
(Duration/Volume)321 749 w
(Gross Amt)443 749 x
(Discount)505 749 x
(Net Amt)568 749 x
F9 (Local LL Other Operator)38 738 w
(2)258 737 w
(00:00:14)321 737 w
(2.40)443 737 x
(0.00)505 737 x
(2.400)568 737 x
F8 (Total Charges $Rs.$)38 726 w
(2.40)443 726 x
(0.00)505 726 x
(2.40)568 726 x
F14 (For BB 1 Unit = 1 KB)38 716 w
g n
F2 B (Plan RENT-FREE-SECOND-PHONE)13 775 w
G
g n
F2 B (Phone Number / UserName 0731-2484033)580 775 x
G
U1
%%Page: 4 4
g n
F12 B (BHARAT SANCHAR NIGAM LIMITED)301 805 y
G
1 w1 594 774 2 774 L
g n
F2 B (Account Number 1010568351)13 789 w
G
g n
F2 B (Invoice Number 10105683510030)580 789 x
G
g n
F2 B (Invoice Date 05/09/2012)229 789 w
G
g n
F13 B (Page 4)496 16 w
G
g g n
/F15{/I 7.5 Fn2}b
F15 B (of 4)532 16 w
G
G
N 36 766 534 -8 i
F8 B (Usage Charges)38 759 w
(Phone Calls)38 749 w
(Units)258 749 w
(Duration/Volume)321 749 w
(Gross Amt)443 749 x
(Discount)505 749 x
(Net Amt)568 749 x
F9 (BSNL Broadband)38 738 w
(15026372)258 737 w
(15026372)321 737 w
(0.00)443 737 x
(0.00)505 737 x
(0.000)568 737 x
F8 (Total Charges $Rs.$)38 726 w
(0.00)443 726 x
(0.00)505 726 x
(0.00)568 726 x
F14 (For BB 1 Unit = 1 KB)38 716 w
g n
F2 B (Plan BBG-COMBO-ULD-850-ANNUAL-COMMIT)13 775 w
G
g n
F2 B (Phone Number / UserName an7312484034_wcdr)580 775 x
G
U1

thanks, i am trying to do that. in case I will need your help i will contact u again.
one more doubt.
F8 B (Recurring Charges)38 759 w
what does F8 B 38 759 & w denotes in the above string
what does y & z denote
and what means
/F15{/I 7.5 Fn2}b
On Wed, 12 Dec 2012 23:29:23 +0530 wrote
 Re: How to scale down number of pages in ps files
 created by abeddie in PostScript Programming - View the full discussion
Remember this is just a sample of what you could do and when your jobs changewhat you do would have to change. The edits are:1) find the %%Page 3 32) change the line above from: U1 to %U13) add the line: 0 792 ypos 72 sub sub neg translate4) Find the line with the smallest y position: F8 (Total Discounts $Rs.$)38 523 w5) Add this line below: currentpoint /ypos exch def pop %added repeat steps 1-5 for but use for step 1:%%Page 4 4 and step 4: F14 (For BB 1 Unit = 1 KB)38 716 w old before page 3%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%F8 (Total Discounts $Rs.$)38 523 w(-386.00)568 523 xg nF2 B (Plan LO-KAR-LO-BAAT-OTHER)13 775 wGg nF2 B (Phone Number / UserName 0731-2484034)580 775 xGU1%%Page: 3 3%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% old before page 4%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%F14 (For BB 1 Unit = 1 KB)38 716 wg nF2 B (Plan RENT-FREE-SECOND-PHONE)13 775 wGg nF2 B (Phone Number / UserName 0731-2484033)580 775 xGU1%%Page: 4 4%%%%%%%%%%%%%
%%%%%%%%%%%%%%%%%%% new before page 3%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%F8 (Total Discounts $Rs.$)38 523 wcurrentpoint /ypos exch def pop %added(-386.00)568 523 xg nF2 B (Plan LO-KAR-LO-BAAT-OTHER)13 775 wGg nF2 B (Phone Number / UserName 0731-2484034)580 775 xG%U1 %commented out0 792 ypos 72 sub sub neg translate % added%%Page: 3 3%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% new before page 4%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%currentpoint /ypos exch def pop %addedg nF2 B (Plan RENT-FREE-SECOND-PHONE)13 775 wGg nF2 B (Phone Number / UserName 0731-2484033)580 775 xG 0 792 ypos 72 sub sub neg translate%U1 %commented out%%Page: 4 4%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% 3
 Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4915986#4915986
 Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4915986#4915986
 To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4915986#4915986. In the Actions box on the right, click the Stop Email Notifications link.
 Start a new discussion in PostScript Programming by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

How to set current year,month as default value in combo box

hi, im newbie of xcelsius user
i realize that hv a issue that display combo box base on year & month
let said
step 1
I create excel data like this
year___ | month_ | Product | revenue
02-04-09 | 02-04-09 | a | $4,154
03-04-09 | 03-04-09 | b | $6,813
04-05-09 | 04-05-09 | a | $9,875
05-06-09 | 05-06-09 | b | $6,813
06-04-10 | 06-04-10 | a | $6,813
07-04-10 | 07-04-10 | b | $9,875
08-06-10 | 08-06-10 | a | $9,875
22-06-10 | 22-06-10 | b | $6,813
Step2
Then i go format cell to format/custom date to year & month
Eg1: Year u2013> 02-04-09 convert to u2018YYYYu2019 (2009)
Eg2: Month u2013> 02-04-09 convert to u2018mmmmu2019 (April)
So output like this
year | month | Product | revenue 
2009 | April | a | $4,154
2009 | April | b | $6,813
2009 | May | a | $9,875
2009 | June | b | $6,813
2010 | April | a | $6,813
2010 | April | b | $9,875
2010 | June | a | $9,875
2010 | June | b | $6,813
But the problem is when i insert to combo box,use u201Cfilter Row u201D, i excpectation will display only 2009,2010
But Actual display the Year in combo box is duplicated :'(
so any solution ? and then only how to set current year & month as default value :'(
thanks,
regards
s1
Edited by: Leong Pui Kee on Feb 25, 2011 5:25 AM
Edited by: Leong Pui Kee on Feb 25, 2011 5:36 AM

hi,
your created data
step 1
I create excel data like this
year___ | month_ | Product | revenue
02-04-09 | 02-04-09 | a | $4,154
03-04-09 | 03-04-09 | b | $6,813
04-05-09 | 04-05-09 | a | $9,875
05-06-09 | 05-06-09 | b | $6,813
06-04-10 | 06-04-10 | a | $6,813
07-04-10 | 07-04-10 | b | $9,875
08-06-10 | 08-06-10 | a | $9,875
22-06-10 | 22-06-10 | b | $6,813
In this, year and month both are same data, make the diffent data like year 2009, 2010 And month Jan, Feb, March, ...Etc
and also one more check you formulas on month and year, select correct source data, destination data for compoonent..
OR
from above, to create a date column and convert date-->year, date--> month and Explore it.
All the best,
Praveen

How to redirect CELLCLI output to text file

Hi,
I would like to redicrect the output of the cellcli command to a text file .
For example , how to redirect the output of this command to a text file on /tmp
CellCLI> list metrichistory where objectType = 'CELL' -
and name = 'CL_TEMP'Thanks

cellcli has spooling capabilities similar to sqlplus:
CellCLI> help spool
Usage: SPO[OL] [<filename> [ CRE[ATE] | REP[LACE] | APP[END]] | OFF ]
Purpose: SPOOL <filename>: Direct the results to the file <filename>.
 SPOOL OFF: Turn off the spooling.
 SPOOL: Check the current spooling status.
Arguments:
 <filename>: The filename where the results will be output.
Options:
 [APPEND]: If the filename already exists, the following output will
 be appended to the file. Without this option, the existing file
 contents will be replaced.
 [CREATE]: If the filename already exists, an error is reported.
 [REPLACE]: If the filename already exists, the contents will be
 replaced. This is the default, when no option is provided.
Examples:
 spool myfile
 spool myfile append
 spool off
 spoolBut if you are trying to script it, it would be easier to just run it command line:
# cellcli -e "list metrichistory where objectType = 'CELL' and name = 'CL_TEMP'" > /tmp/CL_TEMP.txtAlso look into dcli which allows you to run cellcli commands on one or more cells from a compute node.
Good luck.

How to read list output into itab? - URGENT

hai experts,
how to read current report output for further validation i need all data which is showing in output.
my req is,
to read list output all data put into itab.
reward avail for useful answer....
regards,
jai.m

Hi kumar,
you said your using second one.
it's good. then use the below part.but check the syntax because it is there in other programs what i have already phased.
INCLUDE <%_list>.
DATA %_LIST TYPE SLIST_LIST_TAB ." WITH HEADER LINE.
DATA %_LIST_WA TYPE SLIST_LISTLINE.
DATA: BEGIN OF data_tab OCCURS 0,
line(255),
END OF data_tab.
& Then use:-
LOOP AT %_list into %_list_wa.
data_tab-line = %_list-line.
data_tab-line = %_list_wa-line.
APPEND data_tab.
Clear data_tab.
Clear %_list_wa.
ENDLOOP.
kindly reward me if it's ok

How to measure current

Hi:
We have a DAQmx (6024E) and we want to measure the current from a
flowmeter. When I tried to use the example program of LabView, I found
that the measured current is much different from the current we got from a voltagemeter directly.
Please help me to figure out HOW TO MEASURE CURRENT with NIDAQmx and LabView. Thanks
Message Edited by kuroshio on 07-11-2005 10:49 AM
Message Edited by kuroshio on 07-11-2005 10:55 AM

Hello kuroshio,
Current measurements are really just a voltage measurement with V=I*R applied. Have you tried first measuring a voltage and comparing that to the voltage from your voltmeter? You could measure the voltage a couple of ways. I would suggest first using the Measurement & Automation Explorer (MAX) test panels. Make sure your signal is connected to the correct pins and choose differential as the terminal configuration. Once you have a correct voltage measurement, then you can use a LabVIEW example from the example finder (Help>>Find Examples) to get started with a current measurement. In the example finder, you can navigate to Hardware Input and Output>>DAQmx>>Analog Measurements>>Current. There are a couple examples there for current measurements. You will have to enter the value of the resistor you are measuring the current through. Be sure to re-post if you still have problems
-Alan A.

AT-AO 10 current output question

I have an AT-AO-10 that I am using to control a few things, most of which
is using the voltage output. I am using a unipolar, external source
setting. However, I can't get my current output to work. A few
questions: Do I need to use an external voltage source, hooked up to the
EXTREF and RGROUND channels, as I have with my voltage source signals? I
know that I must supply a voltage source wired in series with the signal
that is between 7-40 Volts. But, is this my external source, or do I need
two of them. Also, the manual that came with the AT-AO-10 is pretty lousy
in regards to how to wire it. The diagram shows a 250 Ohm load
(floating). What is this? Is this something that I have to put in there,
as well? ANd wh
at does "floating" mean? If this is something that I have
to provide, does it vary with the size of my external voltage source?
I have a 15 Volt source hooked up right now, but I am also using a 24 Volt
source for some other equipment that I can use. Is there an ideal voltage
source that I should use instead?
Sorry for the ignorance. I just can't get this to work, and have very
little background in EE.
Thanks,
Harry
"That government is best which governs least."
-Adam Smith

Hello;
Unfortunately, that task can only be accomplished on E-series boards.
Regards
Filipe A.
Applications Engineer
National Instruments

How to scale objects evenly (one inside the other)

We are doing a gun caddie right now that has the shape of a motorcycle seat when it is unfolded. We are currently stumped on how to scale these shapes properly. Basically we have one shape of the caddie and then copy that and shrink it from the center to form another shape inside the original shape. The trouble we have is that when we scale the second shape down, it doesn't scale evenly and some sides are have bigger gaps than others. How do we avoid this? we have tried everything we can think of and looked at a bunch of tutorials but they all scale squares or rectangles not weird shapes like we do. Does anyone know an answer to this? I feel like it's something simple I'm not doing. Please Help. Thanks

Start off with a single object. Offset Path with a positive number makes it “bigger”, with a negative number “smaller”.
Scaling is definitely not the way to go.

How to make ALV output Colorless

Hi All,
How to make ALV output Colorless at all....
I have Sum field which after all the rows it iwll do sum and it is showing in ALV .it is showing in Yellow color. Client dont want that.
Currently I am using ALV_LIST_DISPLAY Fm to see this report output via Mss.
So the client want a plane paper color which 2 things are strukcing me up.
1) How to make Sum row(Final Sum up row) as colorless
2) How to make header as colorless.(Header column like emp no , emp name ,e.t.c)
Regards
sas
Can any body any Idea is this possible or not..
Edited by: saslove sap on Apr 13, 2011 11:26 AM

Hi sap.,
I don't think decolor header is possible., but u can show totals color less by calculating manually.,
as., in field catalog donot use do_sum = 'X'. so it will not calculate totals and yellow color will not appear., now u calculate total and append at last row.,
ex: loop at itab into wa.
wa_alv-f1 = wa-f1.
wa_alv-f2 = wa-f2.
temp_total = temp_total + wa-f2.
append wa_alv to itab_alv.
endloop.
wa_alv-f1 = 'Total'.
wa_alv-f2 = temp_total.
append wa_alv to itab_alv.
now itab_alv contains all records along with total..
hope this helps u.,
reply if u need some more clarifications.,
Thanks & Regards
Kiran

How to find current ocfs verison in wondows 2003

Hi
how to find current ocfs verison in wondows 2003

Hello,
See the Metalink note 749006.1
You can use ocfscollect
The output file will show u the information like Volume was formatted with OCFS 9.2.0.6 format
Cheers,
Rodrigo Mufalani
http://mufalani.blogspot.com

How is html page outputed when using taglib and xml ?

Dear all,
 I am a newbie for taglib and xml. Today, when I read some source code of a
 website, I found that there is a entry like
 "%@ taglib uri="/tlds/taglib.tld" prefix="myprefix" %>",
 and some other entries like
 "<myprefix:Content area="<%=contentArea%>" />"
 I opened the specifized file taglib.tld and saw a tag entry named "Content",
 its tagclass is com.mycom.presentation.taglib.ContentTag. Again I opend a
 java class file "ContentTag.java" and saw some setXXX methods and doXXX
 methods. I donot know how is the webpage outputed. Can someone give me a
 detailed description about that? I will greatly appreciate your help.
 Some source code segments are listed as follows:
 test.jsp:
 <%@ taglib uri="/tlds/taglib.tld" prefix="myprefix" %>
 <td>
 <myprefix:Content body="<%=body%>" area="<%=contentArea%>"
 pageName="<%=pageName%>" />
 </td>
 taglib.tld:
 <?xml version="1.0" encoding="ISO-8859-1" ?>
 <!DOCTYPE taglib
 PUBLIC "-//Sun Microsystems, Inc.//DTD JSP Tag Library 1.1//EN"
 "http://java.sun.com/j2ee/dtds/web-jsptaglibrary_1_1.dtd">
 <tag>
 <name>Content</name>
 <tagclass>com.myprefix.presentation.taglib.ContentTag</tagclass>
 <bodycontent>JSP</bodycontent>
 <info>An tag which given the screen and element does the right content
 thing!</info>
 <attribute>
 <name>id</name>
 <required>false</required>
 <rtexprvalue>true</rtexprvalue>
 
 </attribute>
 <attribute>
 <name>pageName</name>
 <required>false</required>
 <rtexprvalue>true</rtexprvalue>
 
 </attribute>
 <attribute>
 <name>area</name>
 <required>false</required>
 <rtexprvalue>true</rtexprvalue>
 
 </attribute>
 <attribute>
 <name>body</name>
 <required>false</required>
 <rtexprvalue>true</rtexprvalue>
 
 </attribute>
 </tag>
 ContentTag.java
 package com.mycom.presentation.taglib;
 import javax.servlet.*;
 import javax.servlet.http.*;
 import javax.servlet.jsp.JspTagException;
 import javax.servlet.jsp.tagext.BodyTagSupport;
 public class ContentTag extends BodyTagSupport {
 private String ......;
 public String ......;
 public ContentTag() {
 super();
 public void setPageName(String pageName) {
 this.pageName = pageName;
 public void setArea(String area) {
 this.area = area;
 public void setSegment(String segment) {
 this.segment = segment;
 if (segment!=null) // && !segment.equals("null")
 this.segment_set = true;
 public void setAdmin(String admin) {
 try{
 this.admin = Boolean.getBoolean(admin);
 } catch (Exception _) {
 debugCategory.debug("Setting admin err " + admin);
 public void setBody(String body)
 try {
 this.body = Long.parseLong(body);
 } catch (NumberFormatException ne) {
 debugCategory.debug("Setting body format err");
 public int doStartTag() {
 if (contentMap == null)
 HttpSession session = pageContext.getSession();
 if (segment==null)
 segment =
 (String)session.getAttribute(Parameters.segment_id);
 if (currentScreen==null)
 currentScreen =
 (String)session.getAttribute(Parameters.currentScreen);
 try{
 StateEngineProxy sep =
 (StateEngineProxy)session.getAttribute("stateMachine");
 ModelManager mm =
 (ModelManager)session.getAttribute("modelManager");
 if (sep == null||mm==null)
 sep = new StateEngineProxy();
 session.setAttribute("stateMachine", sep);
 mm = new ModelManager();
 mm.init(session, sep);
 session.setAttribute("modelManager", mm);
 if (body !=0)
 //content = (ContentAI)
 contentMap.get(Parameters.content_id+Long.toString(body));
 if (content==null)
 debugCategory.debug("Get by Body");
 mm.getContent(body);
 content =
 (ContentAI)session.getAttribute(Parameters.content);
 //contentMap.put(Parameters.content_id +
 Long.toString(body), content);
 file:// pageContext.setAttribute(CONTENT_MAP,
 contentMap, myScope);
 if (pageName!=null&&area!=null &&
 segment!=null&&segment!=""&&area!=""&&pageName!="")
 contentList = (Collection)
 mm.getContentBySegmentPageNameAndArea(segment,
 pageName, area);
 if(contentList!=null){
 Iterator it = contentList.iterator();
 if (it.hasNext()) {
 content = (ContentAI)it.next();
 session.setAttribute(Parameters.content,
 content);
 return EVAL_BODY_TAG;
 return EVAL_BODY_TAG;
 public int doEndTag() throws JspTagException {
 current = SUPPLIERSINFORMATION;
 pageContext.getOut().flush();
 if ( content != null
 && !currentScreen.equals(ScreenNames.CONTENT_LIST_URL)
 && !currentScreen.equals(ScreenNames.CONTENT_EDIT_URL))
 if ( !admin ){
 // include body?
 if
 rentScreen.equals(ScreenNames.CONTENT_NEWS_URL)){
 pageContext.getOut().println("<h3>" + content.getSubject() + " </h3>");
 pageContext.getOut().println("" + " " + content.getBody() + "");
 return EVAL_PAGE;
 public int doAfterBody() throws JspTagException {
 return SKIP_BODY;
 public static String shortenLink(String link)


Hi Andy,
 The sequence of operations that happen when a JSP page encounters a Custome Tag are
 1. Find the class associated with the custom tag from the tld.
 2. The set and get methods that u find are for passing the values for the tag attributes that u may need
 to pass.
 3. The Tag Lib class performs the operation specified and flushes the output to the jsp.
 For further understanding ..u can refer to these sites !!!
 http://java.sun.com/products/jsp/tutorial/TagLibrariesTOC.html
 http://www.weblogic.com/docs51/classdocs/API_taglib.html#intro
 Regards,
 Sundhar Subramanian
 Andy Ping wrote:
 > Dear all,
 >
 > I am a newbie for taglib and xml. Today, when I read some source code of a
 > website, I found that there is a entry like
 > "%@ taglib uri="/tlds/taglib.tld" prefix="myprefix" %>",
 > and some other entries like
 > "<myprefix:Content area="<%=contentArea%>" />"
 > I opened the specifized file taglib.tld and saw a tag entry named "Content",
 > its tagclass is com.mycom.presentation.taglib.ContentTag. Again I opend a
 > java class file "ContentTag.java" and saw some setXXX methods and doXXX
 > methods. I donot know how is the webpage outputed. Can someone give me a
 > detailed description about that? I will greatly appreciate your help.
 > Some source code segments are listed as follows:
 >
 > ----------------
 > test.jsp:
 > ----------------
 > ...
 > <%@ taglib uri="/tlds/taglib.tld" prefix="myprefix" %>
 > ...
 > <td>
 > <myprefix:Content body="<%=body%>" area="<%=contentArea%>"
 > pageName="<%=pageName%>" />
 > </td>
 > ...
 >
 > ----------------
 > taglib.tld:
 > ----------------
 > <?xml version="1.0" encoding="ISO-8859-1" ?>
 > <!DOCTYPE taglib
 > PUBLIC "-//Sun Microsystems, Inc.//DTD JSP Tag Library 1.1//EN"
 > "http://java.sun.com/j2ee/dtds/web-jsptaglibrary_1_1.dtd">
 > ......
 > <tag>
 > <name>Content</name>
 > <tagclass>com.myprefix.presentation.taglib.ContentTag</tagclass>
 > <bodycontent>JSP</bodycontent>
 > <info>An tag which given the screen and element does the right content
 > thing!</info>
 > <attribute>
 > <name>id</name>
 > <required>false</required>
 > <rtexprvalue>true</rtexprvalue>
 > 
 > </attribute>
 > <attribute>
 > <name>pageName</name>
 > <required>false</required>
 > <rtexprvalue>true</rtexprvalue>
 > 
 > </attribute>
 > <attribute>
 > <name>area</name>
 > <required>false</required>
 > <rtexprvalue>true</rtexprvalue>
 > 
 > </attribute>
 > <attribute>
 > <name>body</name>
 > <required>false</required>
 > <rtexprvalue>true</rtexprvalue>
 > 
 > </attribute>
 > </tag>
 > ......
 >
 > ----------------
 > ContentTag.java
 > ----------------
 > package com.mycom.presentation.taglib;
 >
 > import javax.servlet.*;
 > import javax.servlet.http.*;
 > import javax.servlet.jsp.JspTagException;
 > import javax.servlet.jsp.tagext.BodyTagSupport;
 > ...
 >
 > public class ContentTag extends BodyTagSupport {
 > private String ......;
 > public String ......;
 > ......
 >
 > public ContentTag() {
 > super();
 > }
 >
 > public void setPageName(String pageName) {
 > this.pageName = pageName;
 > }
 >
 > public void setArea(String area) {
 > this.area = area;
 > }
 >
 > public void setSegment(String segment) {
 > this.segment = segment;
 > if (segment!=null) // && !segment.equals("null")
 > {
 > this.segment_set = true;
 > }
 > }
 >
 > public void setAdmin(String admin) {
 > try{
 > this.admin = Boolean.getBoolean(admin);
 > } catch (Exception _) {
 > debugCategory.debug("Setting admin err " + admin);
 > }
 >
 > }
 > public void setBody(String body)
 > {
 > try {
 > this.body = Long.parseLong(body);
 > } catch (NumberFormatException ne) {
 > debugCategory.debug("Setting body format err");
 > }
 > }
 >
 > public int doStartTag() {
 > if (contentMap == null)
 > {
 > }
 > HttpSession session = pageContext.getSession();
 > if (segment==null)
 > {
 > segment =
 > (String)session.getAttribute(Parameters.segment_id);
 > }
 > if (currentScreen==null)
 > {
 > currentScreen =
 > (String)session.getAttribute(Parameters.currentScreen);
 > }
 > try{
 > StateEngineProxy sep =
 > (StateEngineProxy)session.getAttribute("stateMachine");
 > ModelManager mm =
 > (ModelManager)session.getAttribute("modelManager");
 > if (sep == null||mm==null)
 > {
 > sep = new StateEngineProxy();
 > session.setAttribute("stateMachine", sep);
 > mm = new ModelManager();
 > mm.init(session, sep);
 >
 > session.setAttribute("modelManager", mm);
 > }
 > if (body !=0)
 > {
 > //content = (ContentAI)
 > //
 > contentMap.get(Parameters.content_id+Long.toString(body));
 > if (content==null)
 > {
 > debugCategory.debug("Get by Body");
 > mm.getContent(body);
 > content =
 > (ContentAI)session.getAttribute(Parameters.content);
 >
 > //contentMap.put(Parameters.content_id +
 > Long.toString(body), content);
 > file:// pageContext.setAttribute(CONTENT_MAP,
 > contentMap, myScope);
 > }
 > }
 > if (pageName!=null&&area!=null &&
 > segment!=null&&segment!=""&&area!=""&&pageName!="")
 > {
 > contentList = (Collection)
 > mm.getContentBySegmentPageNameAndArea(segment,
 > pageName, area);
 > if(contentList!=null){
 > Iterator it = contentList.iterator();
 > if (it.hasNext()) {
 > content = (ContentAI)it.next();
 > session.setAttribute(Parameters.content,
 > content);
 > return EVAL_BODY_TAG;
 > }
 > }
 > }
 > ...
 > }
 > return EVAL_BODY_TAG;
 > }
 >
 > public int doEndTag() throws JspTagException {
 > current = SUPPLIERSINFORMATION;
 > pageContext.getOut().flush();
 > if ( content != null
 > && !currentScreen.equals(ScreenNames.CONTENT_LIST_URL)
 > && !currentScreen.equals(ScreenNames.CONTENT_EDIT_URL))
 > {
 > if ( !admin ){
 > // include body?
 > if
 > rentScreen.equals(ScreenNames.CONTENT_NEWS_URL)){
 > pageContext.getOut().println("<h3>" + content.getSubject() + " </h3>");
 > }
 > pageContext.getOut().println("" + " " + content.getBody() + "");
 > }
 > }
 > return EVAL_PAGE;
 > }
 >
 > public int doAfterBody() throws JspTagException {
 > return SKIP_BODY;
 > }
 >
 > public static String shortenLink(String link)
 > {
 > ...
 > }
 > }

How to scale current output?

Similar Messages

Maybe you are looking for