HOW TO SCAN USING HP2840 COLOR LASERJET

HOW TO SCAN USING HP2840 COLOR LASERJET AND IMAC LATE 2011 MAVERICKS?

The last driver from HP was for 10.7. You could try that to see if it works. Have you tried Image Capture for scanning? Another possibility is VueScan http://www.hamrick.com

Similar Messages

  • How can I use the color adjustments interface that shows up for camera RAW on jpeg files?

    How can I use the color adjustments interface that shows up for camera raw on other files types? The HLS controls had the secondary color adjustments (6 colors instead of the 3). Plus, it had same vibrancy and a better Curves interface. Yesterday was the first time I imported raw into Photoshop CS5 and I got that really cool interface. What is that? Can I use that on other file formats?

    Actually I am using the Tradional Chinese Version, when I try to edit the jpg file with camera raw, the system shows that there is no camera raw plug-in. The cmaera raw never work.

  • How do I use the color picker in Photoshop CC it will not pull in my swatches and how do I change swatches to another pallet from pantone?

    How do I make the color picker work in Photoshop CC? It will not pull in my new swatch colors it just uses old pantone swatches?

  • Acrobat 9.0 Scan From HP Color LaserJet 2840 Sheet Feeder

    Running Windows 7 32-bit on HP computer and HP Color LaserJet 2840 all-in-one.
    Attempting to scan from sheet feeder and getting pages clipped at bottom.   Windows Scanner program works correctly.
    The Acrobat 9.0 Pro scanner setup (WIA, not TWAIN) only allows me to select "automatic" paper size - no other paper size options are presented. Acrobat was recently reinstalled; all software is updated to current revision levels.
    Any ideas?

    Experiencing the same issue.  Mac OS X 10.8.5, HP Easy Start Version 1.1.1 (33) Correctly identifies my HP product, searches for and suggests the appropriate drivers (I'm assuming), and fails when clicking Install. Dialog box says the same exact message as the previous post.  Network is obviously working. Can we get direct links to these driver downloads? Essential Software version 4.0.0.32HP Scan version 4.7.0.46  Can't find them anywhere on the HP site. Thanks.

  • Cannot scan from HP Color Laserjet 2840 All In One Any Ideas?

    I have a Mac Book Pro with OS 10.5.8 on it.  I recently had my MAC in for service and a full reinstall of the OS was necessary.  I was hoping that once I reinstalled the OS and other programs that everything would work.  Apparently I was wrong.  I could get my HP Color LaserJet 2840 printer working, however I was unable to get the scanning feature to work to scan documents into a folder on my computer.  I tried uninstalling and re-installing to no avail.  I looked inside the HP Director program and it showed that no Scanner or Utilities could be accessed.  They were greyed out.  Everything in HP Director was greyed out.  I took a look at the connections on the printer, restarted the printer a couple times, nothing worked.  My printer is connected through my network.  I am unsure what to try next.  Any ideas?

    Have you installed this driver?
    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en &cc=us&prodTypeId=18972&prodSeriesId=445194&prodNameId=445197&swEnvOID=219&swLan g=8&mode=2&taskId=135&swItem=ly-58934-1

  • How do I install my color laserjet 2605 dn on my windows vista laptop.

    I have been using an HP Color Laserjet 2605 dn on my aging Windows XP computer.  Now that the system is becoming unreliable, I purchased a new HP desktop with Windows 7.  My printer is not compatible with Win7, so my other option is to use it on my HP laptop with Win Vista.
    According to what I have read,  this printer should be Windows Vista compatible.  However, when I try to install the software, I keep getting an error message that I need to be logged on as administrator or I can choose "run as administrator" or something like that.  I followed all those steps, and cannot get past this error message.  And, I AM logged on as administrator.
    What can I do to get this software installed and use the printer again?  It prints wonderfully, does everything I want, including automatic duplex printing.
    Thanks for any help.

    I have tried to install my HP color laserjet 2605 dn on my windows 7 operating system and I get an administrator error

  • How to Scan using your HP Office Jet Pro 8600

    Well, I figured out my own answer because I couldn't find a "solved" topic in this regard. So then I decided to post my findings in order to help the next querier (is that a word = one who queries). FYI -  I am not a 'techie' and while I can find my way around a computer it sometimes takes a while.  Also, I have Windows 7 on this laptop if that makes a difference.
    1. Go to Control Panel and choose:
    2. Hardware and Sound, then
    3. Devices & Printers, then
    4. Fax-HP Office Jet Pro 8600 (Network) or whatever printer choice pertains to your situation, then
    5. HP Printer Assistant, then
    6. Scanner Actions, then
    7. Scan a document or photo, then
    8. Save as PDF
    9. Scan
    10. Save to folder you choose
    I know this may seem simplistic to most of you but maybe someone like me is out there trying to find this out and this might help.
    Roxi
    This question was solved.
    View Solution.

    Hi Acupuncture,
    Thank you very much for posting your solution that you found yourself, on using the scan function on your HP OfficeJet Pro 8600. I also apologize we were not fast enough to answer one of your inquiries on the HP Support Forums. I was able to check your user page but was unable to find your initial post on asking us How to Scan, did you delete the question? Either way I am glad you are now up and scanning from your OJ 8600.
    For future reference I would like you to take a look here: How to Scan: Windows 7, here you will be given all options and shortcuts on scanning with or without the HP software as well as some cool features, like scanning from the front panel of your 8600 and adding multiple pages to a single file.
    Again I appreciate you taking the time to help the other Community members, so Thank you again!!
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • How do you use the color channel output mode in Ultra Key in Premiere Pro CS6?

    I'm wondering how the color channel output mode is supposed to be used in the Ultra Key inside of Premiere Pro CS6? I've looked through all the Adobe help items and I don't see any documentation on it.

    Before I answer, you might want to read the following article: http://www.photoshopessentials.com/essentials/rgb/
    So, basically, if you understood all of that, and maybe already knew all of that, then you can use the color channel to see more deeply into the effect by looking at the details of the image through the lens of the color channel.

  • HOW TO SCAN USING HP LASER PRO MFPM177fw, and my laptp is HP Spectre 360

    i just bought printer HP laser Jet Pro MFP M177fw, and my lap top is HP Spectre 360, I need to scan from my lap top, but no function on M177fw.Please kindly help, urgentMany thanks

    Welcome to the forums Beth
    Thank you for posting in the community. I will certainly do my best to help you with the scanning issue you are running into after upgrading to Windows 8.1. I would like you to try a few things.
    Could you please run the HP Print and Scan Doctor again and report back to me with any errors it may show or if it shows the software is not installed. (If you can recall the tool showing if the software was installed or not, disregard running the tool again).
    I would also like for you to try scanning by using Microsoft Paint to see if the scan will work that way.
    There is a video on this post that will show you how to scan through Paint if you need assistance: Scanning with Paint in Windows 8
    Try scanning by using the Solution Center from your desktop and let me know if you see any errors as well.
    Hope to hear back from you!
    Enjoy your Thursday
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • How can I use custom colors and not presets when using Smart Brush Tool Color?

    I don't see a way to use the color picker tool or change the color to custom colors. Please help.

    seodude wrote:
    I don't see a way to use the color picker tool or change the color to custom colors. Please help.
    This tool employs a gradient adjustment layer. In the layers palette, double click the layer thumbnail, not the name.
    Then, double click the gradient bar to bring up the gradient editor.

  • Scanning to HP Color LaserJet MFP M476nw

    I just installed the software for the MFP476nw. When I scan an 8.5 by 11 page, it scans it onto a larger size which must be cropped before saving as a pdf. This creates a lot of work for a large document when you have to crop each page before saving. What is the best way to scan 8.5 by 11 page to the same paper size in pdf using the MFP475nw?
    This question was solved.
    View Solution.

    Sure, on Mac you may use the HP Scan software, located under Applications > Hewlett-Packard.
    Once clicking on New Scan you may have to click the Show Details button and change the Scan Size to US Letter.
    Another altervative is to scan using the OS tools such as Apple Preview, Image Capture or the Printers & Scanners screen.
    Be sure to undeck the Custom Size option within the scan settings and then select the US Letter size.
    You may find a detailed instructions for those in the fofllowing link:
    http://h20566.www2.hp.com/hpsc/doc/public/display?sp4ts.oid=5245583&docId=emr_na-c03415763&docLocale...
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • How do I get HP Color LaserJet 2840 printing with PS?

    Hello everybody,
    I just recently got an HP Color LaserJet 2840. I installed the lastest available driver package (downloaded from hp.com) on an MacBook 10.5.5. Printing in general works, but I cannot change printing parameters. When I try to select the item in the printing dialog, I get a struck trough entry telling me that "hpPostScriptPDE" could not be loaded because it seems to be damaged or the resource is unavailable.
    Then it goes on telling me that the driver is not compatible with my system and that I should go get the latest. But there is no update. And running 10.5.6 has not improved the situation.
    The package in question is here:
    /Macintosh HD/Library/Printers/hp/PDEs/hpPostScriptPDE.plugin
    I chmod (0775) and chown (root:admin) the whole plugin, I reinstalled everything, I ran diskutil, nothing seems to help.
    Any idea is greatly appreciated!
    Regards
    Jim

    Hello Jim,
    Have you tried trashing the PDE plugin? Or better still, try trashing the contents of the ./Libary/Printers/hp folder and then install the latest driver you have. I have seen installers leave files (ie not update) when their version number is the same.
    PaHu

  • New computer/windows 7. how to install deskjet 4210, color laserjet cp1510?

    I have a new computer with windows 7. None of my printers (Deskjet F4210, Color laserjet CP1510) will install with windows 7.

    If you have not downloaded the Windows 7 drivers for the Deskjet F4120 you can get them from the links below.
    Deskjet F4210
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=al-74858-1&cc=us&dlc=en&lc=en&...
    For the Laserjet CP1510 you can follow the steps provided on the link below
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01796859&cc=us&dlc=en&lc=en&os=4063&product=342...
    Binary_Zen (worked at HP )
    Click the white Kudos star to say thanks
    Please mark Accept As Solution if it solves your problem

  • How to scan using hp j4680

    how to scan from a hp officejet j4680 ?

    Hello benalanmax,
    I understand you would like to know how to scan from your HP Officejet J4680 printer, I would like you to go ahead and click on the link below to learn How to Scan:
    http://h10025.www1.hp.com/ewfrf/wc/documentSubCategory?tmp_rule=37088&tmp_task=u seCategory&cc=us&dlc=en&lang=en&lc=en&product=3692888
    Once on this page please select your current Operating system from the list below.
    I hope you find this helpful, if you require more assistance, please let me know.
    Thanks,
    **HevnLghHelP**
    I work on behalf of HP

  • How to scan using m252dw

    I have a new HP M252dw. Not sure how to scan a document. No scan button.

    The last driver from HP was for 10.7. You could try that to see if it works. Have you tried Image Capture for scanning? Another possibility is VueScan http://www.hamrick.com

Maybe you are looking for