How to schedule a job Monday thru Friday only
How can I schedule a job Monday thru Friday only? I tried to use a Factory Calendar but we do not have any M-F calendars setup. If I need to create a new factory calendar, how can I create on without any holidays?
Thanks.
Ryan
Hi
see this
Create a Variant for the Program and
Schedule JOB in background:
Go to SM36 create a Job
enter Program and Variant for that program in STEP..
click on Start Condition
Click on DATE and TIME enter date scheduled Start and END times
click on Period Values
Click on HOURLY/WEEKLY etc
CLick on RESTRICTIONS also to use further criteria.
so your job will be scheduled and run as per your requirement.
and in SM37 Transaction check the status of that JOB
Check this link for scheduling jobs..
http://help.sap.com/saphelp_nw2004s/helpdata/en/c4/3a7f87505211d189550000e829fbbd/content.htm
Regards
Anji
Similar Messages
-
How to schedule a job from r3 to BI daily ?
Please let me know how to schedule a job frm bi to r3, that is i want to load data from a sd ds to a sd cube in bi. I do not want to use a PC and can i schedule a job daily without a PC, which can run daily after 10pm ,remember its not a manual schedule. Do we have any option to schedule in hourly, weekly, daily from bi to r3. If yes HOW ? i know we can do it thru infopackage group but will the infopackage group accept if its only a single load....I think it should have multiple infopackage rite to add it to a group or can it b a single job as well.
Edited by: Manohar P on Oct 16, 2008 3:14 PMAn infopackage group can only run infopackages, and unfortunately, you will need an ABAP program to trigger the event in R/3. There is plenty of ABAP code in this forum to show you exactly how to do this.
Try this:
Triggering a Process Chain From R/3 pgm
R/3 Jobs Triggering BW job
You can also review OSS Note 135637. This note will show from R/3 to BI (BW). But you can reverse the logic to go from BI to R/3.
Hope this helps.
My suggestion would be to replace the infopackage group with a process chain, because you can call an ABAP program from a process chain. You also have many more processes at your disposal using process chains. -
How to schedule the job to run evry Sunday at 12 P.M IST.
Hi Experts,
I want to schedule a job which will run evry Sunday at 12 P.M IST.
I have written the below script.
[code]BEGIN
SYS.DBMS_SCHEDULER.CREATE_JOB
job_name => 'SERVICE_SAL_FS.SAL_MESSAGE_BUFFER_PURGE_JOB'
,start_date => SYSTIMESTAMP
,repeat_interval => 'FREQ=WEEKLY; BYDAY=SUN; BYHOUR=12;BYMINUTE=0; BYSECOND=0;'
,end_date => NULL
,job_class => 'DEFAULT_JOB_CLASS'
,job_type => 'STORED_PROCEDURE'
,job_action => 'SERVICE_SAL_FS.SAL_MESSAGE_BUFFER_PURGE_PROC'
,comments => 'Run at 12 P.M.IST every Sunday'
,enabled => TRUE
END;[/code]
But the server in US.
[code]SELECT sysdate from Dual;
6/11/2013 3:58:58 AM
--But the time in India is 02:28 PM [/code]
How to convert the timezone to IST.
Please help me how to schedule the job to run evry Sunday at 12 P.M IST.
Thanks.Did you read DBMS_SCHEDULER docs:
The calendaring syntax does not allow you to specify a time zone. Instead the Scheduler retrieves the time zone from the start_date argument. If jobs must follow daylight savings adjustments you must make sure that you specify a region name for the time zone of the start_date. For example specifying the start_date time zone as 'US/Eastern' in New York will make sure that daylight saving adjustments are automatically applied. If instead the time zone of the start_date is set to an absolute offset, such as '-5:00', daylight savings adjustments are not followed and your job execution will be off by an hour half of the year.
When start_date is NULL, the Scheduler will determine the time zone for the repeat interval as follows:
It will check whether the session time zone is a region name. The session time zone can be set by either:
Issuing an ALTER SESSION statement, for example:
SQL> ALTER SESSION SET time_zone = 'Asia/Shanghai';
Setting the ORA_SDTZ environment variable.
If the session time zone is an absolute offset instead of a region name, the Scheduler will use the value of the DEFAULT_TIMEZONE Scheduler attribute. For more information, see the SET_SCHEDULER_ATTRIBUTE Procedure.
If the DEFAULT_TIMEZONE attribute is NULL, the Scheduler will use the time zone of systimestamp when the job or window is enabled.
SY. -
How to schedule a job in SAP CPS
Hi,
I am new to SAP CPS.
So please tell how to schedule a job in SAP CPS. And which kind of job cam be schedule means BAP report.
Thanks
AnurodhHi,
In the installation and administration guide you'll probably find some examples.
The Job Definition you need is SAP_AbapRun to run any ABAP.
You submit this, specify the parameters as desired, and scheduling information, and that should do the trick.
That is assuming you have already connected CPS to an SAP system.
Check the topics in the docs within the product and on SDN on:
- Connecting to an SAP system
- Submitting Jobs
- SAP_AbapRun
Regards,
Anton. -
How to schedule a job occurring time for 1 1/2 hour in sql server
how to schedule a job occurring time for 1 1/2 hour in sql server
Hi,
This is a known issue in the previous SQL Server version and has been fixed in SQL Server 2012. You should be able to set 90 minutes and the change would be saved in SQL Server 2012.
http://connect.microsoft.com/SQLServer/feedback/details/346786/ssms-does-not-support-job-schedule-frequencies-greater-than-60-minutes
Currently, you may schedule the job to occur every 1 hour or you may refer to the suggestion by Latheesh to get around this.
Thank you for your understanding.
Tracy Cai
TechNet Community Support -
How to schedule a job to run twice within a request set?
How to schedule a job to run twice within a request set?
Create one more stage for the same concurrent program.
Thanks
Nagamohan -
How to schedule a job every 10 minutes from 07 to 19 from Monday to Friday
Hi,
I would like to schedule a job in a way that runs every 10 minutes starting from 07 up to 19 from Monday to Friday
How to do this?
thanks in advance
lk
Oracle rdbms 10.2.0.4Off the top of my head :
begin
dbms_scheduler.create_job('OTN_JOB',
job_action=> 'YOUR_STORED_PROCEDURE' ,
repeat_interval => 'FREQ=DAILY; BYHOUR=07,08,09,10,11,12,13,14,15,16,17,18,19; BYMINUTE=0,10,20,30,40,50',
job_type=>'STORED_PROCEDURE', enabled=>TRUE);
end;
/Best Regards
mseberg -
How to schedule a job which needs to run evry day 1(AM) o clk?
begin
DBMS_SCHEDULER.create_job (
job_name=> 'BJAZPROPMAINTAIN',
job_type=> 'PLSQL_BLOCK',
job_action=> schemaname.schedule_procedure;',
start_date=> '02-aug-08 01:00:00 PM',
repeat_interval=> 'FREQ=DAILY; BYHOUR=01',
enabled =>TRUE,
auto_drop=>FALSE);
end;
Hi all,
i want to schedule a job which needs to be run every day one o clock early morning i haven't set the job_scheduler before this. by searching thru net and prev scheduler coding i have written the above code here for running evry day early morning 1 o clock i m little bit of confused in the time
repeat_interval=>'FREQ=DAILY;BYHOUR=01'; whether is is correct one or wrong?
and also there are some other job is scheduled in the same time . will it create any problem of executing at the sametime or we need to change the timing of 1:15 like that?
please advise me..Thanks a lot so it will be executing every night 1 o clock am i right?
It should.But I shall say that schedule it and than only we can be sure about it.About the timing part, its correct syntatically.
i saw that job_priority column in dba_scheduler_jobs table but dont know what it does?
and also how can fetch this job scheduler sid,serial# i checked v$session but how to correlate this ..
please explain me
In schedulerjobs,there is a column ,client_id.You can map it to the sid from the V$session.I don't have a box running Oracle at the moment so I wont be test it for you.Do it and post feedback.
what will happen if more than one job is scheduled in the sametime
i think for this only we set the priority on the two which one needs to be first exec(depends on the high priority)
let me know about this.
Jobs are prioritized by two parts,within the class they are a part of and individualy.If you have two jobs in the same class than they can be make run with a different priority with the priority clause set within them.This has a number which start from 1 meaning highest priority.So if there are two jobs scheduled for the same time,you need to check which job class they fall into. If they are in the same class than you have to change the priority of them.
I suggest you read the books,they cover all these topics in much more detail.
Also there is a dedicated forum about Scheduler.In future for Scheduler regarded questions, you can visit there.
Scheduler
Aman.... -
How to schedule a job poles for a entry in a table.
Hi All ,
I have to schedule a job which runs somw stored procedures only on sunday and monday of a week at 3 AM in the morning.
The condition is that another application puts an entry into a table around 3 AM (some times before and some times late), now my should query
count in the table and runs the procs , however once its done ,it should do it monday and then it should not run till next sunday.
I have successfully created a job which keeps failing till it receives the entry and successfully runs the proc once the entry is there...
However how to schedule this thing ..correctly I need help , I want this job to disable itself on sunday once the procs are run wake up next morning
run again..and then next week ..
Following is the job ,
BEGIN
-- Job defined entirely by the CREATE JOB procedure.
DBMS_SCHEDULER.create_job (
job_name => 'TESTING_FIRST_JOB',
job_type => 'PLSQL_BLOCK',
job_action => 'BEGIN SEODS.test_procedure_11292011(); END;',
start_date => SYSTIMESTAMP,
repeat_interval => 'freq=minutely; byminute=5',
end_date => NULL,
enabled => TRUE,
comments => 'Job defined entirely by the CREATE JOB procedure.');
end;
=====================================================
and following is the proc...
create or replace
procedure
test_procedure_11292011 as
var number;
begin
insert into SEODS.job_status
values (systimestamp, 'JOB TEST_PROCEDURE_11292011 HAS STARTED SUCCESSFULLY');
commit;
SELECT COUNT(*)
INTO var
FROM seods.student_weekend_status;
if var=0 then
raise_application_error(-20101, 'There is no record in the student_weekend_status table');
else
all_realtime();
end if;
insert into SEODS.job_status
values (systimestamp, 'JOB TEST_PROCEDURE_11292011 HAS FINISHED SUCCESSFULLY');
commit;
end;
Thanks in advance , please helpHi,
This is a known issue in the previous SQL Server version and has been fixed in SQL Server 2012. You should be able to set 90 minutes and the change would be saved in SQL Server 2012.
http://connect.microsoft.com/SQLServer/feedback/details/346786/ssms-does-not-support-job-schedule-frequencies-greater-than-60-minutes
Currently, you may schedule the job to occur every 1 hour or you may refer to the suggestion by Latheesh to get around this.
Thank you for your understanding.
Tracy Cai
TechNet Community Support -
How to schedule a job in another system.
Hi,
Now i have an ABAP program, which run in system ABC, client 001. i want to schedule a job in the program, with the function modules JOB_OPEN, JOB_SUBMIT, and JOB_CLOSE. But this job should run in ABC/002.
How to write code?
Who can help me on the requirement, or provide me another new solution except event trigger?
Thanks & Best Regards,
JohnneyHere is the code. It works fine..
FUNCTION Z_F_TRIGGER_REPORT.
""Local Interface:
*" IMPORTING
*" VALUE(I_PROG) TYPE D010SINF-PROG
*" VALUE(I_VARIANT) TYPE VARIS-VARIANT
*" VALUE(I_MODE) TYPE CHAR01
*" EXPORTING
*" VALUE(E_SUBRC) TYPE SYST-SUBRC
*" VALUE(E_MSG) TYPE CHAR80
Functio ID : Z_F_TRIGGER_REPORT
TITLE : Report Trigger Tool
Create Date: 15.03.2004
Author : Denis Vieira
Ownership : For the exclusive use of the Procter & Gamble Company
Description:
The purpose of this function module is to trigger programs
requested remotely.
AUTHORIZATION CHECKS
OBJECT AUTHORITY FIELDS ABAP FIELDS
| |
CHANGE HISTORY *
DATE | Name | Description | Reference *
29.Jun.2006 | BA4513 | Unicode conversion and upgrade | SPK290606
| | to My SAP ERP |
**eject.
Check if selected program exists in the destination file
SELECT SINGLE SUBC
FROM D010SINF
INTO D010SINF-SUBC
WHERE PROG EQ I_PROG
AND R3STATE EQ C_A.
IF SY-SUBRC NE C_0.
MOVE C_2 TO E_SUBRC.
MOVE 'Report does not exist in destination system'(M01) TO E_MSG.
EXIT.
ENDIF.
Check if program request is an executable program
IF D010SINF-SUBC NE C_1.
MOVE C_2 TO E_SUBRC.
MOVE 'Report is not an executable program'(M02) TO E_MSG.
EXIT.
ENDIF.
Check if selected variant exists in the destination file
SELECT COUNT( * )
FROM VARIS
INTO W_COUNT
WHERE REPORT EQ I_PROG
AND VARIANT EQ I_VARIANT
AND DYNNR EQ C_1000.
IF W_COUNT EQ C_0.
MOVE C_2 TO E_SUBRC.
MOVE 'Variant does not exist in destination system'(M03) TO E_MSG.
EXIT.
ENDIF.
IF I_MODE EQ C_B.
PERFORM 0100_BACKGROUND USING I_PROG I_VARIANT
CHANGING E_MSG E_SUBRC.
ELSE.
PERFORM 0200_FOREGROUND USING I_PROG I_VARIANT
CHANGING E_MSG E_SUBRC.
ENDIF.
ENDFUNCTION.
*eject
*& Form 0100_background
Executes Selected program in BackGround Mode VIA JOB
*Block commented from here SPK290606
*FORM 0100_BACKGROUND USING L_PROG L_VARIANT
CHANGING L_MSG L_SUBRC.
*Block commented till here SPK290606
*Block added from here SPK290606
FORM 0100_BACKGROUND USING L_PROG LIKE D010SINF-PROG
L_VARIANT LIKE VARIS-VARIANT
CHANGING L_MSG TYPE CHAR80
L_SUBRC TYPE SYST-SUBRC.
*Block added till here SPK290606
CONCATENATE C_AREA
C_UND
L_PROG
C_UND
SY-DATUM
C_UND
SY-UZEIT
INTO W_JOBNAME.
Create a JOB and Get the Number for further execution
CALL FUNCTION 'JOB_OPEN'
EXPORTING
JOBNAME = W_JOBNAME
IMPORTING
JOBCOUNT = W_JOBCOUNT.
IF SY-SUBRC NE C_0.
MOVE C_2 TO L_SUBRC.
MOVE 'Error opening job'(M07) TO L_MSG.
EXIT.
ENDIF.
Submit program
SUBMIT (L_PROG)
USING SELECTION-SET L_VARIANT
VIA JOB W_JOBNAME NUMBER W_JOBCOUNT
AND RETURN.
IF SY-SUBRC NE C_0.
MOVE C_2 TO L_SUBRC.
MOVE 'Error Submitting Job'(M06) TO L_MSG.
EXIT.
ENDIF.
Closes job to start its processing
CALL FUNCTION 'JOB_CLOSE'
EXPORTING
JOBCOUNT = W_JOBCOUNT
JOBNAME = W_JOBNAME
STRTIMMED = 'X'.
IF SY-SUBRC NE C_0.
MOVE C_2 TO L_SUBRC.
MOVE 'Error closing job'(M08) TO L_MSG.
EXIT.
ENDIF.
MOVE C_0 TO L_SUBRC.
MOVE 'Program Submitted in Background Mode'(M09) TO L_MSG.
ENDFORM.
*eject
*& Form 0200_foreground
Executes Selected program in ForeGround Mode VIA Submit
*Block commented from here SPK290606
*FORM 0200_FOREGROUND USING L_PROG L_VARIANT
CHANGING L_MSG L_SUBRC.
*Block commented till here SPK290606
*Block added from here SPK290606
FORM 0200_FOREGROUND USING L_PROG LIKE D010SINF-PROG
L_VARIANT LIKE VARIS-VARIANT
CHANGING L_MSG TYPE CHAR80
L_SUBRC TYPE SYST-SUBRC.
*Block added till here SPK290606
SUBMIT (L_PROG) USING SELECTION-SET L_VARIANT
EXPORTING LIST TO MEMORY AND RETURN.
IF SY-SUBRC EQ C_0.
MOVE C_0 TO L_SUBRC.
MOVE 'Report submitted successfully'(M04) TO L_MSG.
ELSE.
MOVE C_2 TO L_SUBRC.
MOVE 'Error submitting report'(M05) TO L_MSG.
ENDIF.
ENDFORM. -
How to schedule dependent job in oracle
I would like to schedule a job which should be dependent on the completion of previous job. How is it achieved in oracle 10g
refer to this examples about DBMS_SCHEDULER.CREATE_CHAIN to form job dependency.
-
How to Schedule a Job Chain to start automatically on SAP CPS.
Hi,
I did a job chain and i want to run automatically on sap cps Tuesday thru Saturday at 6:00 a.m., i make a calendar on sap cps with this specific options but the job chain doesn't start running. I don't know if i need to do something more, so if someone can give a little help with this i will apreciate a lot.
Thanks,
OmarIt finished ok but on the operator message i got the following message:
Unable to resubmit this job.
Details:
com.redwood.scheduler.api.exception.TimeWindowExpectedOpenWindowException: CalculateNextClose should only be called on an open time window
at com.redwood.scheduler.model.method.impl.TimeWindowMethodImpl.calculateNextCloseIntersectionInt(TimeWindowMethodImpl.java:388)
at com.redwood.scheduler.model.method.impl.TimeWindowMethodImpl.calculateNextCloseIntersectInt(TimeWindowMethodImpl.java:249)
at com.redwood.scheduler.model.TimeWindowImpl.calculateNextCloseIntersectInt(TimeWindowImpl.java:212)
at com.redwood.scheduler.model.method.impl.SubmitFrameMethodImpl.calculateNextInt(SubmitFrameMethodImpl.java:178)
at com.redwood.scheduler.model.SubmitFrameImpl.calculateNext(SubmitFrameImpl.java:176)
at com.redwood.scheduler.model.listeners.JobStatusChangePrepareListener.resubmitSubmitFrameJob(JobStatusChangePrepareListener.java:763)
at com.redwood.scheduler.model.listeners.JobStatusChangePrepareListener.resubmitJob(JobStatusChangePrepareListener.java:637)
at com.redwood.scheduler.model.listeners.JobStatusChangePrepareListener.processJobToFinalState(JobStatusChangePrepareListener.java:520)
at com.redwood.scheduler.model.listeners.JobStatusChangePrepareListener.modelModified(JobStatusChangePrepareListener.java:233)
at com.redwood.scheduler.persistence.impl.LowLevelPersistenceImpl.informListeners(LowLevelPersistenceImpl.java:728)
at com.redwood.scheduler.persistence.impl.LowLevelPersistenceImpl.writeDirtyObjectListRetry(LowLevelPersistenceImpl.java:207)
at com.redwood.scheduler.persistence.impl.LowLevelPersistenceImpl.access$000(LowLevelPersistenceImpl.java:38)
at com.redwood.scheduler.persistence.impl.LowLevelPersistenceImpl$WriteDirtyObjectListUnitOfWork.execute(LowLevelPersistenceImpl.java:79)
at com.redwood.scheduler.persistence.impl.PersistenceUnitOfWorkManager.execute(PersistenceUnitOfWorkManager.java:34)
at com.redwood.scheduler.persistence.impl.LowLevelPersistenceImpl.writeDirtyObjectList(LowLevelPersistenceImpl.java:102)
at com.redwood.scheduler.cluster.persistence.ClusteredLowLevelPersistence.writeDirtyObjectList(ClusteredLowLevelPersistence.java:59)
at com.redwood.scheduler.model.SchedulerSessionImpl.writeDirtyListLocal(SchedulerSessionImpl.java:648)
at com.redwood.scheduler.model.SchedulerSessionImpl.persist(SchedulerSessionImpl.java:626)
at com.redwood.scheduler.apiint.model.UnitOfWorkManager.perform(UnitOfWorkManager.java:32)
at com.redwood.scheduler.apiint.model.UnitOfWorkManager.perform(UnitOfWorkManager.java:13)
at com.redwood.scheduler.jobchainservice.JobChainService.childJobFinalStatus(JobChainService.java:223)
at com.redwood.scheduler.core.processserver.ProcessServerRuntime.childJobFinalStatus(ProcessServerRuntime.java:836)
at com.redwood.scheduler.core.processserver.ProcessServerRuntime.onMessage(ProcessServerRuntime.java:248)
at com.redwood.scheduler.infrastructure.work.MessageEnabledWork.run(MessageEnabledWork.java:104)
at com.redwood.scheduler.infrastructure.work.WorkerImpl.run(WorkerImpl.java:109)
at java.lang.Thread.run(Thread.java:534) -
I am using Weblogic Server 6.0. I want to make a schedule job in weblogic to
connect download something regularly. Can anyone tell me how to make a
schedule job ??
Best Regards,
AnnaAnna <[email protected]> wrote:
I already write the code by making use of time services....however,
how to install it into Weblogic Server?
Is it making an EJB and then deploy it to schedule the job or create a
startup class to schedule it ? When i create a startup class called Timer,
the Weblogic does not need any deployment. Then how the server know
which class i talk about? Any steps i done incorrectly?If you use startup classes you need to put them and all application classes
they need in the system classpath :
http://e-docs.bea.com/wls/docs61/programming/packaging.html#1052224
(and this will make your application non-redeployeable).
Probably the better solution is to deploy your app as an EAR and use
'load-on-startup' servlet instead of startup classes - web component
is always deployed after ejb's and it can 'see' all EJB classes - you can
do all the startup work in the servlet's init() method.
Can anyone help ?
Thanks
Anna
"Cameron Purdy" <[email protected]> wrote in message
news:3b8a3b89$[email protected]..
You can use Weblogic's time services, which can provide an event on a
regular basis.
Also, search back through the EJB newsgroup for "Indus". They have somesort
of scheduling program.
There is one other product that I can't remember the name of ... let mesee
... it's called "flux". Check that out if you get a chance.
Peace,
Cameron Purdy
Tangosol Inc.
<< Tangosol Server: How Weblogic applications are customized >>
<< Download now from http://www.tangosol.com/download.jsp >>
"Anna" <[email protected]> wrote in message
news:3b8a1f08$[email protected]..
I am using Weblogic Server 6.0. I want to make a schedule job in
weblogic
to
connect download something regularly. Can anyone tell me how to make a
schedule job ??
Best Regards,
Anna
Dimitri -
How to schedule a job for transaction CG36, incl. variant?
Hi all,
When you enter transaction CG36, you need to select a User Exist (EHS_DXSDB). After that you need to define a file path.
I would like to schedule a job for transaction: CG36 > Define User Exit: EHS_DXSDB (Import Dok-X material Safety Data Sheets) > and define a path. With transaction SE93, I found program name: RC1RIMPS (program is allowed to be job scheduled), only I can't create a Variant (to define the user exit and file path, no selectionscreen), how to create a variant?
The following programs can't be scheduled either (as they are not of type 1 or J):
SAPLC131
SAPLC1EO
SAPLC3G
Thank you in advance!
Kind regards,
Roy DerksHello Roy
I am sorry. To my knowledge up to ECC 6.0 Enhancement Pack 4 there is no SAP EH&S process available there you can do what you are requesting. The "problem" is that you need to "answer" the user dialog. Therefore you can not generate/prepare a variant which could be processed as a job according to my knowledge.
Therefore in my opinion you have this option only: prepare a copy of the transaction (or only the report) using either "Z" or "Y (customer reports). Then you need to exclude some line in the code (which gives rise to the user dialog) and prepare some customer specific coding so that the resulting report can be used in such a way that a variant is possible, but you must make sure that the process later (the real upload process) is processed too in this "job" queue. IN any case: you need to check the log of the report and this must be done by an user. Therefore an automatic process does have some "risks"
The topic of import of reports is used in most cases during a set up of EH&S, because of mergers/acustions but not in the daily work with EH&S and there I believe that SAP does not support this demand.
With best regards
C.B. -
How to schedule a job to run only in a time window
Hi,
I need to schedule a job to run every day but sundays from 7am to 6pm. I managed to get it to start at seven like this
FREQ=WEEKLY;BYDAY=TUE,WED,THU,FRI,SAT;BYHOUR=7;BYMINUTE=0;BYSECOND=0
how can I set the job to stop at 6pm?
thanks in advanceYes, as far as I could tell you create a resource plan to allocate processor resources, assign a resource plan to the window, then assign the job to a job class which is in turn assigned a resource group within that resource plan. Then when the window is active, it sets the active resource plan for the database so the job will run using this until the window deacivates the resource plan. Unfortunately because the resource plan is database wide, it means you could only really have one time window active at any one time within which to run jobs, I don't think two windows could overlap.
Easier to work within jobs, but its a shame the job doesn't end itself, rather than having to have the second job, although the second job does enable you to engage in some communication between jobs to cleanly end it, rather than stop it dead. I have a job that runs until a set time each day, but it just works on a loop that sleeps for a few minutes each time, checking for file arrival and processing it, and sending a notification e-mail if it reaches its end time without the file arriving.
Maybe you are looking for
-
Muse pages are not loading completely in browser. Forced to reload page to load.
I have a several websites that I am working on that when I publish to a production server, the HTML is not completely rendering in the browser. After reloading all the elements display correctly. Any suggestions??
-
How can i backup my app`s?
Hi everyone, so i`d like to format my mac for install the new snow Leopard, so i have one iPhone with may app`s that i bought in the Apple Store, so for i format and don`t lost my app`s what can i do? Thanks a lot. Sorry for my english, i`m learning.
-
Credit card paymens via a vendor
What steps do I need to take to set up the process for our credit card payment vendor to accept via Forms Central? Many thanks.
-
I have innstalled oracle 11g and trying to use generate some normal queries but cl scr is not working in sqlplus the error is : SP2-1531: No command prompt interpreter Please give me the solution cause i need to know whether It is my installation pro
-
Why is history showing up in bookmarks?
When scrolling through my bookmarks, there are hundreds of history listings shown as well. How do I correct this, and prevent it from happening again?