How to schedule multiple backup job through windows server backup in windows server 2008 R2
hi expert,
need your help, In my small environment I am using windows 2008 R2 as a domain controller. and installed windows server feature for backup.
Now i want to create backup at a different time.
1. System state backup at 5.00 PM on saturday only
2. finance and hr data backup on daily basis at 5.00 PM.
so how i create different job schedule through windows server backup.
Regards,
Triyambak
Regards, Triyambak
Scenario #1
The following command will create a Task Scheduler task named
DailyFolder1Backup with the start time of 23:00.
This task will run DAILY with the HIGHESTprivileges. It will run the Windows Server Backup CLI to backup
g:\folder1 to target volume
F:.
SCHTASKS /Create /SC DAILY /TN
DailyFolder1Backup /RL HIGHEST /ST 23:00/TR
"wbadmin start backup –backupTarget:F: -include:g\folder1
-vsscopy -quiet"
Scenario #2
The following command will create a Task Scheduler task named
DailyFolder2Backup with the start time of 24:00.
This task will run DAILY with the HIGHESTprivileges. It will run the Windows Server Backup CLI to backup
h:\folder2 to target volume
F:.
SCHTASKS /Create /SC DAILY /TN
DailyFolder2Backup/RL HIGHEST /ST 24:00/TR
"wbadmin start backup –backupTarget:F: -include:h:\folder2
-vsscopy -quiet"
Please feel free to let us know if you have any question or concern.
Please VOTE as HELPFUL if the post helps you and remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.
Similar Messages
-
How to schedule a background job in realtime
Hi,
Can you tell me how to schedule a background job in realtime.
give some example scenerios in scheduling the background jobs in realtime.
Thanks.
sam.And also.....
There are two ways for you to handle,
one manually setting up the job through SM36 which is better and convinient,
secondly through program using FM's JOB_OPEN, SUBMIT, JOB_CLOSE.
Find below steps in doing both:
Procedure 1:
1. Goto Trans -> SM36
2. Define a job with the program and variant if any
3. Click on start condition in application tool bar
4. In the pop-up window, click on Date/Time
5. Below you can see a check box "Periodic Job"
6. Next click on Period Values
7. Select "Other Period"
8. Now give '15' for Minutes
9. Save the job
Procedure 2 via Program:
Below is a sample code for the same. Note the ZTEMP2 is the program i am scheduling with 15mins frequency.
DATA: P_JOBCNT LIKE TBTCJOB-JOBCOUNT,
L_RELEASE(1) TYPE c.
CALL FUNCTION 'JOB_OPEN'
EXPORTING
JOBNAME = 'ZTEMP2'
IMPORTING
JOBCOUNT = P_JOBCNT
EXCEPTIONS
CANT_CREATE_JOB = 1
INVALID_JOB_DATA = 2
JOBNAME_MISSING = 3
OTHERS = 4.
IF SY-SUBRC 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
SUBMIT ZTEMP2 VIA JOB 'ZTEMP2' NUMBER P_JOBCNT
TO SAP-SPOOL WITHOUT SPOOL DYNPRO
WITH DESTINATION = 'HPMISPRT'
WITH IMMEDIATELY = SPACE
WITH KEEP_IN_SPOOL = 'X' AND RETURN.
CALL FUNCTION 'JOB_CLOSE'
EXPORTING
JOBCOUNT = P_JOBCNT
JOBNAME = 'ZTEMP2'
STRTIMMED = 'X'
PRDMINS = 15
IMPORTING
JOB_WAS_RELEASED = L_RELEASE
EXCEPTIONS
CANT_START_IMMEDIATE = 1
INVALID_STARTDATE = 2
JOBNAME_MISSING = 3
JOB_CLOSE_FAILED = 4
JOB_NOSTEPS = 5
JOB_NOTEX = 6
LOCK_FAILED = 7
INVALID_TARGET = 8
OTHERS = 9.
IF SY-SUBRC 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Hope the above helps you.
***********reward points,if found useful -
How to schedule the background job daily twice?
Hi,
How to schedule the background job daily twice? any conditions?
Regards,
Srihithasee the step by step procedure.
Scheduling Background Jobs:
1. Background jobs are scheduled by Basis administrators using transaction SM36.
2. To run a report in a background, a job needs to be created with a step using the report name
and a variant for selection parameters. It is recommended to create a separate variant for each
scheduled job to produce results for specific dates (e.g. previous month) or organizational units (e.g.
company codes).
3. While defining the step, the spool parameters needs to be specified
(Step-> Print Specifications->Properties) to secure the output of the report and help authorized users
to find the spool request. The following parameters needs to be maintained:
a. Time of printing: set to Send to SAP spooler Only for now
b. Name abbreviated name to identify the job output
c. Title free form description for the report output
d. Authorization a value defined by Security in user profiles to allow those users to access
this spool request (authorization object S_SPO_ACT, value SPOAUTH). Only users with matching
authorization value in their profiles will be able to see the output.
e. Department set to appropriate department/functional area name. This field can be used in
a search later.
f. Retention period set to Do not delete if the report output needs to be retained for more
than 8 days. Once the archiving/document repository solution is in place the spool requests could
be automatically moved to the archive/repository. Storage Mode parameter on the same screen
could be used to immediately send the output to archive instead of creating a spool request.
Configuring user access:
1. To access a report output created by a background job, a user must have at
least access to SP01 (Spool requests) transaction without restriction on the user
name (however by itself it will not let the user to see all spool requests). To have
that access the user must have S_ADMI_FCD authorization object in the profile with
SPOR (or SP01) value of S_ADMI_FCD parameter (maintained by Security).
2. To access a particular jobs output in the spool, the user must have
S_SPO_ACT object in the profile with SPOAUTH parameter matching the value used
in the Print Specifications of the job (see p. 3.d above).
3. Levels of access to the spool (display, print once, reprint, download, etc) are
controlled by SPOACTION parameter of S_SPO_ACT. The user must have at least
BASE access (display).
On-line reports:
1. Exactly the same configuration can be maintained for any output produced
from R/3. If a user clicks Parameters button on a SAP Printer selection dialog, it
allows to specify all the parameters as described in p. 3 of
Scheduling background jobs section. Thus any output created by an online report
can be saved and accessed by any user authorized to access that spool request
(access restriction provided by the Authorization field of the spool request
attributes, see p. 3.d of Scheduling background jobs section).
Access to reports output:
1. A user that had proper access (see Configuring user access above) can
retrieve a job/report output through transaction SP01.
2. The selection screen can be configured by clicking Further selection
criteria button (e.g. to bring Spool request name (suffix 2) field or hide other
fields).
3. The following fields can be used to search for a specific output (Note that
Created By must be blank when searching for scheduled jobs outputs)
a. Spool request name (suffix 2) corresponds to a spool name in p. 3.b in
Scheduling background jobs section above).
b. Date created to find an output of a job that ran within a certain date range.
c. Title corresponds to spool Title in p. 3.c in Scheduling background jobs
section above).
d. Department - corresponds to spool Department in p. 3.e in Scheduling
background jobs section above).
4. Upon entering selection criteria, the user clicks the Execute button to
retrieve the list of matching spool requests.
5. From the spool list the user can use several function such as view the
content of a spool request, print the spool request, view attributed of the spool
request, etc. (some functions may need special authorization, see p.3 in
Configuring user access)
a. Click the Print button to print the spool request with the default attributes
(usually defined with the job definition). It will print it on a printer that was
specified when a job was created.
b. Click the Print with changed attributed button to print the spool request
with the different attributes (e.g. changing the printer name).
c. Click the Display contents button to preview the spool request contents. A
Print and Download functions are available from the preview mode. -
How to create a batch job through coding
Hi Experts,
How to create a batch job through coding?
Regards
SarojHi, below is the code.
***Create Variant for the job
***Get the dynamic variant name
DATA: variant_name TYPE varid-variant value 'test'.
DATA: vari_desc LIKE varid,
vari_contents LIKE rsparams OCCURS 0 WITH HEADER LINE,
vari_text LIKE varit OCCURS 0 WITH HEADER LINE.
CLEAR: vari_desc,vari_contents,vari_text.
REFRESH: vari_contents[], vari_text[].
vari_desc-mandt = sy-mandt.
vari_desc-report = 'ZCTRAOBJECT_CAL_FILEDAMT_JOB'.
vari_desc-variant = variant_name.
vari_desc-transport = 'F'.
vari_desc-environmnt = 'A'.
vari_desc-version = 1.
vari_desc-mlangu = sy-langu.
***Varint Text
vari_text-mandt = sy-mandt.
vari_text-langu = sy-langu.
vari_text-report = 'ZCTRAOBJECT_CAL_FILEDAMT_JOB'.
vari_text-variant = variant_name.
CONCATENATE 'job' 'Background' INTO vari_text-vtext SEPARATED BY space.
APPEND vari_text.
***Partner
IF ( p_partner-low IS NOT INITIAL ).
vari_contents-selname = 'PARTNER'.
vari_contents-kind = 'S'.
vari_contents-sign = 'I'.
IF ( ( p_partner-low IS NOT INITIAL ) AND ( p_partner-high IS INITIAL ) ).
vari_contents-option = 'EQ'.
vari_contents-low = p_partner-low.
ENDIF.
IF ( ( p_partner-low IS NOT INITIAL ) AND ( p_partner-high IS NOT INITIAL ) ).
vari_contents-option = 'BT'.
vari_contents-low = p_partner-low.
vari_contents-high = p_partner-high.
ENDIF.
APPEND vari_contents.
ENDIF.
***Contract Account
IF ( p_cont_acct-low IS NOT INITIAL ).
vari_contents-selname = 'CA_ACC'.
vari_contents-kind = 'S'.
vari_contents-sign = 'I'.
IF ( ( p_cont_acct-low IS NOT INITIAL ) AND ( p_cont_acct-high IS INITIAL ) ).
vari_contents-option = 'EQ'.
vari_contents-low = p_cont_acct-low.
ENDIF.
IF ( ( p_cont_acct-low IS NOT INITIAL ) AND ( p_cont_acct-high IS NOT INITIAL ) ).
vari_contents-option = 'BT'.
vari_contents-low = p_cont_acct-low.
vari_contents-high = p_cont_acct-high.
ENDIF.
APPEND vari_contents.
ENDIF.
***Contract Object
IF ( p_cont_obj-low IS NOT INITIAL ).
vari_contents-selname = 'CO_OBJ'.
vari_contents-kind = 'S'.
vari_contents-sign = 'I'.
IF ( ( p_cont_obj-low IS NOT INITIAL ) AND ( p_cont_obj-high IS INITIAL ) ).
vari_contents-option = 'EQ'.
vari_contents-low = p_cont_obj-low.
ENDIF.
IF ( ( p_cont_obj-low IS NOT INITIAL ) AND ( p_cont_obj-high IS NOT INITIAL ) ).
vari_contents-option = 'BT'.
vari_contents-low = p_cont_obj-low.
vari_contents-high = p_cont_obj-high.
ENDIF.
APPEND vari_contents.
ENDIF.
***Account Category
IF ( p_ctra_acc_category IS NOT INITIAL ).
vari_contents-selname = 'P_CAT'.
vari_contents-kind = 'P'.
vari_contents-low = p_ctra_acc_category.
APPEND vari_contents.
ENDIF.
***filed_freq_to_change_from
IF ( p_filed_freq_to_change_from IS NOT INITIAL ).
vari_contents-selname = 'P_TO_CH'.
vari_contents-kind = 'P'.
vari_contents-low = p_filed_freq_to_change_from.
APPEND vari_contents.
ENDIF.
***req_filed_freq_change
IF ( p_req_filed_freq_change IS NOT INITIAL ).
vari_contents-selname = 'P_CHANGE'.
vari_contents-kind = 'P'.
vari_contents-low = p_req_filed_freq_change.
APPEND vari_contents.
ENDIF.
***Test Run p_tstrun
vari_contents-selname = 'P_TSTRUN'.
vari_contents-kind = 'P'.
vari_contents-low = p_test_run.
APPEND vari_contents.
***Update Filing Frequency Checkbox
vari_contents-selname = 'P_FIL_FR'.
vari_contents-kind = 'P'.
vari_contents-low = p_update_filing_frequency.
APPEND vari_contents.
***Update Incoming Payment Channel Checkbox
vari_contents-selname = 'P_PAY_CH'.
vari_contents-kind = 'P'.
vari_contents-low = p_update_payment_channel.
APPEND vari_contents.
***Update Filing Channel Checkbox
vari_contents-selname = 'P_FIL_CH'.
vari_contents-kind = 'P'.
vari_contents-low = p_update_filing_channel.
APPEND vari_contents.
***Use Current Filing Period Checkbox
vari_contents-selname = 'P_CU_PER'.
vari_contents-kind = 'P'.
vari_contents-low = use_curr_per.
APPEND vari_contents.
****Create Variant thru Function Module
CALL FUNCTION 'RS_CREATE_VARIANT'
EXPORTING
curr_report = 'ZCTRAOBJECT_CAL_FILEDAMT_JOB'
curr_variant = variant_name
vari_desc = vari_desc
TABLES
vari_contents = vari_contents
vari_text = vari_text.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
****Prepare all the date for scheduling job
***Get the print parameters
DATA: params LIKE pri_params.
CLEAR params.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
mode = 'CURRENT'
no_dialog = 'X'
IMPORTING
out_parameters = params.
params-paart = 'X_65_255'."'X_PAPER'.
***Open The scheduling job
DATA: job LIKE tbtcjob-jobname,
jobcount LIKE tbtcjob-jobcount.
CLEAR: job,jobcount.
job = 'ZCTRAOBJECT_CAL_FILEDAMT_JOB'.
CALL FUNCTION 'JOB_OPEN'
EXPORTING
jobname = job
IMPORTING
jobcount = jobcount
EXCEPTIONS
OTHERS = 4.
***Job Submit
DATA: authcknam LIKE tbtcjob-authcknam.
CLEAR: authcknam.
authcknam = sy-uname.
params-primm = space.
CALL FUNCTION 'JOB_SUBMIT'
EXPORTING
authcknam = authcknam
jobcount = jobcount
jobname = job
priparams = params
report = 'ZCTRAOBJECT_CAL_FILEDAMT_JOB'
variant = variant_name.
***JOB_CLOSE
DATA: sdlstrttm TYPE tbtcjob-sdlstrttm,
released LIKE btch0000-char1.
sdlstrttm = p_job_start_time + 30.
CALL FUNCTION 'JOB_CLOSE'
EXPORTING
sdlstrtdt = p_job_start_date
sdlstrttm = sdlstrttm
jobcount = jobcount
jobname = job
IMPORTING
job_was_released = released.
Regs
Manas -
How to schedule the back job scheduling
how to schedule the back job for bdc , can we use it for both call transaction and session method . how to schedule the back job schedulinng for lsmw
hi,
Use t-code SM36 for scheduling.
<b>Do reward.</b> -
How to schedule a background Job based on events
Hi,
We are on 4.6 C.
We have a background job that has two ABAP programs.
We need to start the 2nd ABAP program only after the first one has run successfully.
If the second ABAP program does not run, the the job should have a status "FINISHED".
Help appreciated.
Thanks
MalaHi,
How to schedule a background Job based on events,please refer to the follow SAP help:
You can use events that have already been defined, or you can create new events for scheduling background jobs.
If you wish to use new events, do the following to implement the event scheduling:
Define and transport the event as a user event with transaction SM62.
You must define only event IDs; event arguments are not defined in the R/3 System. Instead, you specify event arguments when you schedule a job to wait for an event and when you trigger the event.
If you define a new event, you must also transport it to your production systems. The event transaction does not have a connection to the transport system. Instead, you must create a transport request for the event yourself.
Do this to transport an event:
Create a transport request.
Start the editor in the transport request and enter the following:
R3TR TABU <table name> where table name is BTCSEV for a system event ID, BTCUEV for a user event ID.
Press F2 with the cursor on the table name to call up the screen for specifying the table entries to transport. In this screen, enter the event IDs that you have created.
Save and release the transport request. Ensure that it is imported into your production system(s).
To trigger an event, add:
the function module BP_EVENT_RAISE to your ABAP program, or
the program SAPEVT to your external script, batch file, or program.
When your programs execute these keywords, an event will be triggered in the R/3 background processing system. The event-based scheduler is started immediately. It in turn starts all jobs that were waiting upon the event, subject to normal background processing restrictions, such as the requirement that the job has been released to start.
Schedule the jobs that are to run when your events are triggered.
You can schedule jobs for one-time start or to be started whenever an event is triggered.
Regards,
collysun -
How to Schedule SAP background job at OS Level
Hi All,
Can Anyone tell me how to Schedule SAP background job at OS Level (unix).
Regards,
AnilHi Anil,
I donu2019t know your requirements, anyway itu2019s possible to setup your SAP job in order to start after an event, and after that you can get the event triggered from the Operating System in the following way:
- log into you Operating System with the SIDadm user id (at the Operating System level) and go to directory /usr/sap/SID/SYS/exe/run
- Run the SAPEVT executable as follows:
sapevt YOUR_EVENT -t pf=/usr/sap/SID/SYS/profile/DEV_DVEBMGS00_server001 nr=01
This will raise the event, and cause the job scheduled within SAP to execute.
You can periodically execute this job with crontab.
Thanks,
Federico Biavati -
How to schedule the background job using current selection screen field val
Hello Friends,
How to schedule the background job using current selection screen field values.
after completion of the job the spool should be sent as a mail to SAP Inbox.
Is there any way to create the variant dynamically by reading the current selection screen values.
Thanks,
RaviHi,
To get the variant details you can use teh following FM.
'RS_VARIANT_CONTENTS'.
Regards,
Ankur Parab -
Hi
How to schedule a V3 job in ECC to execute at reqular intervals
ThanksHi
As already answered it could be scheduled using job control option relating to datasource in R/3 system.
In addition to these you can also set the V3 jobs if you have an external job controlling system which would execute V3 programs are regular interval as desired.
Various V3 programs as as:
RMBWV303 V3 job for Inventory
RMBWV312 V3 job for Deliveries
RMBWV313 V3 job for Invoices
RMBWV308 V3 job for Shipments
RMBWV318 V3 Job for Services
RMBWV311 V3 Job for Orders
RMBWV302 V3 Job for Purchase
Regards
Ashish -
Hi
Logically, we should be able to schedule multiple BDLS jobs for different selection of tables. But when I schedule second job, it either runs into error or completes without considering the table selection.
Is there any procedure for scheduling multiple BDLS jobs or the parallel BDLS execution functionality does not exist ?
Thanks & Regards
MadhuNo Roel,
I think I took the wrong term. We have several logical system landscapes in 1 maintenance cycle.
For instance:
Maintenance cycle 1 contains:
landscape R3
DEV
QAS
PRD
landscpae BW
BD0
BA0
BP0
landscape SRM
ED0
EA0
EP0
If I want to schedule an import job to import all transports of maintenance cycle 1 in all systems, I have in the above example to schedule 3 jobs. (1 in PRD, 1 in BP0 and 1 in EP0)
The question is whether I can do this by 1 action. Schedule the import of all PRD systems on the maintenance level in stead of the landscape levels separately.
kind regards,
David -
How to Schedule OWB Process Flows through OEM
Hi,
I have successfully created mappings and process flows for my project.
But now I want to schedule the process flows through OEM.
Following are my DB configurations..
OWB Version : 10g R1 (Oracle SID LVDSGDEV ) on windows
Runtime Owner: ATS_RUN_OWNER (Oracle SID LVDSGDEV )
Runtime User : ATS_RUN_USER (Oracle SID LVDSGDEV )
Work Flow Schema: OWF_MGR (Oracle SID LVDSGDEV)
Source & Target DB : 10g (Oracle SID LVRUNDEV) on windows
Process which I want to Schedule is....
Process Flow Location: ATS_LOC
Process Flow Name: PKG_DM
Process Name: BASE_LOAD
Can someone please suggest me, the procedure to schedule this process flow.....You may choose just to schedule the mapping directly through OEM. Create an OEM SQLPlus job that calls the script:
@c:\owb_home\owb\rtp\sqlplus_exec_template.sql;
Check the beginning of the sqlplus_exec_template.sql. It will show examples of the parameters it accepts and it has some documentation. It works nicely. -
ME05 How to schedule source list job with steps?
Can someone please give me instructions on how to create source list ME05 in background using "Steps"? I know how to create a background job in ME05 but need to have several jobs run back to back in the middle of the night. I am reluctant to shedule them at different times and would prefer to use the "Steps" function. Thanks for your input!
Hello
Steps:
First create variant for the report in normal execution mode (to provide input selection parameters in backgrpund)
1. Transaion code SM36
Give Job name you want created (Give some meaningful name) and Press enter
2. Give the ABAP program name
3. Select variant and save the selections
4. Come back to initial screen , select the Start condition button and provide the interval as per requirement to schedule the job and save.
5. Save the job.
Check the Job in SM37 and relase the Job.
warm regards
Rama -
How to schedule the background job if report have Presentation server files
Hi All,
I have searched the forums and found , the way for the scheduling the background job if report selection screen have the presentation server file input.
1. Using the Open data set method.
And my client is not OK with Open dataset way, it there any other way to do this, As we are using the EXCEL file.
Thanks and Regards,
BharaniHi,
As said above it is generally not possible. Since your client most obviously doesn't like graphical background I would recomend storing data as till now, but show it with your own report in more userfriendly way. For example:
- as ALV Grid
- in excel with use of OLE either as embedded in SAP or new window (check transaction OLE for example)
- with use of webdynpro
BR
Marcin Cholewczuk -
How to schedule a background job using the Event concept..?
Hi Folks,
I have a requirement that, I need a schedule a background job.
Once after the previous job successful only, new job should get triggered. How to go ahead with this..?
For Eg, I am scheduling a job called ZTEST periodically for 1 minute. If the job is not get completing with in 1 minute, I dont want to start my new job. Only after the success of my old job, I want my new job to run.
Waiting for ur replies.
Regards,
Savi.Hi,
You can use events that have already been defined, or you can create new events for scheduling background jobs.
If you wish to use new events, do the following to implement the event scheduling:
Define and transport the event as a user event with transaction SM62.
You must define only event IDs; event arguments are not defined in the R/3 System. Instead, you specify event arguments when you schedule a job to wait for an event and when you trigger the event.
If you define a new event, you must also transport it to your production systems. The event transaction does not have a connection to the transport system. Instead, you must create a transport request for the event yourself.
Do this to transport an event:
Create a transport request.
Start the editor in the transport request and enter the following:
R3TR TABU <table name> where table name is BTCSEV for a system event ID, BTCUEV for a user event ID.
Press F2 with the cursor on the table name to call up the screen for specifying the table entries to transport. In this screen, enter the event IDs that you have created.
Save and release the transport request. Ensure that it is imported into your production system(s).
To trigger an event, add:
the function module BP_EVENT_RAISE to your ABAP program, or
the program SAPEVT to your external script, batch file, or program.
When your programs execute these keywords, an event will be triggered in the R/3 background processing system. The event-based scheduler is started immediately. It in turn starts all jobs that were waiting upon the event, subject to normal background processing restrictions, such as the requirement that the job has been released to start.
Schedule the jobs that are to run when your events are triggered.
You can schedule jobs for one-time start or to be started whenever an event is triggered.
Regards,
Raj. -
How to schedule a print job in Lion.
I had snow leopard and when I upgraded to lion I can't figure out how to schedule print jobs. I use to be able to do work at night. Then print in the morning so I wouldnt disturb anyones sleep. How do I do it with Lion?
I have to agree that it's lame not having the Scheduled Printing as an option. I will reiterate that I too enjoyed "completing" a task to print in the morning in order to not disturb others while sleeping.
I've already sent Apple some Feedback. Hope it works and we can bring back this efficient option.
Here's the link to the Mac OS X Feedback page: http://www.apple.com/feedback/macosx.html
Cheers!
Maybe you are looking for
-
How to find the max data transfer rate(disk speed) supported by mobo?
I plan on replacing my current HDD with a new and bigger HDD. For this I need to know the max data transfer rate(disk speed) that my mobo will support. However, dmidecode is not telling me that. Am I missing something? Here's dmidecode: # dmidecode 2
-
I am unable to receive or send email from my IPAD. The error message says "Connection to server failed". Help!! geandreamer44
-
Image cropping before uploading an image
Hi all, I am using webcenter spaces 11.1.1.8.6. I have a requirement where i need an option to crop a image before uploading it. For example before a logged in user uploads his image he should be able to crop only a certain part of the image and uplo
-
Creative Cloud not installing on my mac. it says (Error code: A12E5)
Creative Cloud not installing on my mac. it says (Error code: A12E5). What do I do?
-
Why is video footage lost on ipad after creating an imovie?
Having created an imovie, why does video footage disappear , how can it be retrieved, any tips to prevent in future and while on the topic , how can a Dvd disc be created to create a hard copy of all imovies?