How to Schedule Multiple projects
Hi All,
I hav a scenario in which there are almost 50 projects live in the system and suddenly 2 new projects come up which are to be taken at priority no.2 & 3 w.r.t the 50 present. These two projects would be consuming the existing resources. Is there a way by which the system would reschedule these two along with the other 50 and assign priority to these.
Regards
Abhishek
hi abhishek,
i am learning sap-ps , plz send me any PS end user or config documents as it would help me in my carrer .
regards
pushpa
Similar Messages
-
VS2013 Community Edition : How to add multiple projects in one solution?
I am an experienced .Net developer. I am using Visual Studio since 2005.
Yesterday, I just installed “Visual Studio 2013 Community Edition”. Suddenly I came to know that I can’t add multiple projects to a solution. Even a project does not have
solution !!
I had also tried to create a blank Visual Studio solution and then tried to add projects to that solution. But after creation of project, it will not be added to that solution.
Infact it even doesn’t have solution !!
How can I add multiple projects to a solution in VS2013 Community Edition?Glad to see the problem was resolved. Thank you for sharing the solution here.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
How can a Multiple Projects in P6 can be linked to One Project in Unifier
Hello Team,
Can anyone help me with some solution to link Multiple Projects in P6 to a One Project in Unifier
Regards,
AvinashHi Avinash,
Hope you well.
Not sure if this is answering your question correctly but you can set each P6 schedule to link to a specific Unifier schedule sheet in a Unifier project. You can have a number of schedule sheets in a Unifier project however only one schedule sheet can be the master schedule sheet.
Hope this helps. -
How to use multiple projects in single application :)
Hai ,
I ve to use single .portal for accessing multiple projects in a application. if i create two new projects in a application i cant able to use .portlet file of one project to display in another .portal . is there any way to display both the project .portlet files in a single portal. :)not really.. sorry
Kunal Mittal -
How to Select Multiple Projects?
Another: "Wait a sec -- you mean Aperture still can't...?" question...
So I'm in the Inspector's Projects tab. I've just created and named a new sub-folder, into which I want to drag several dozen projects. I've tried Cmd-clicking; I've tried Shift-clicking. But so far I only seem to be able to select (and then drag) one Project at a time.
Does this mean, in the above scenario, I have to select, drag, and drop each of my 47 (or however many) Projects into that new sub-folder separately -- one at a time?
Please tell me there's a way to select multiple Projects (and multiple Folders for that matter) in order to do some quick re-organizing/re-arranging in the Inspector. Or is this going to be yet another should've-been-there-in-the-Beta-version Feature Request?
Thanks,
John Bertram
TorontoI'm also frustrated by not being able to select multiple projects. I guess we should leave feedback.
-
Can't figure out how to open multiple projects in imovie
I want to copy clips from one project into another. I've read you simply open the two projects and drag clips from one to the other. I may be missing something quite basic, but I cannot figure out how to get two projects open at once. If I open from the project list, I can only choose one. What am I missing????
Open the project that you want to take video from, select the frames that you want to include in your other project, and Edit > Copy (or Command-C). Return to your Projects list, select the project you want to add the frames to, move the playhead to the point where you want the frames to be inserted, and Edit > Paste (Command-V).
-
Hi
Logically, we should be able to schedule multiple BDLS jobs for different selection of tables. But when I schedule second job, it either runs into error or completes without considering the table selection.
Is there any procedure for scheduling multiple BDLS jobs or the parallel BDLS execution functionality does not exist ?
Thanks & Regards
MadhuNo Roel,
I think I took the wrong term. We have several logical system landscapes in 1 maintenance cycle.
For instance:
Maintenance cycle 1 contains:
landscape R3
DEV
QAS
PRD
landscpae BW
BD0
BA0
BP0
landscape SRM
ED0
EA0
EP0
If I want to schedule an import job to import all transports of maintenance cycle 1 in all systems, I have in the above example to schedule 3 jobs. (1 in PRD, 1 in BP0 and 1 in EP0)
The question is whether I can do this by 1 action. Schedule the import of all PRD systems on the maintenance level in stead of the landscape levels separately.
kind regards,
David -
How to schedule multiple reports with different local to change static field language ?
Hi all,
we have requirement that we will place multiple schedule request on same server ,This schedule request will be different local setting with parameter value like: en-GB,en-US,Chinese...etc .We used translation Manager for this and it takes this parameter and change report language for static fields.
problem is that ,on server it is not working properly,we tested for one report .if we pass prompt value to change local setting in report the we need to log off and login again in CMC to reflect new local or on BI Launchpad we need to refresh page then it shows new language.
How we can do this with multiple scheduled report which will have different local value like en-GB,en-US,Chinese,German....?These schedule request are getting placed in server by one user .
Please help us with sample code.
Thanks
MadanHi,
The only approach I can think of is to create a template report which uses variables
For each column you would need to variable
v_columnAName and v_columnAValue
v_columnAName would have a if statement in it
=if([client]="clientA" or [client]="clientC";NameOf([firstName]);if([client]="clientB";NameOf([SSN]);NameOf([lastName]));
v_columnA would have a if statement in it
=if([client]="clientA" or [client]="clientC";[firstName];if([client]="clientB";[SSN],[lastName]));
This would only work when you had a small set of clients.
This might be more managable if it was done in the universe
Regards
Alan -
How to schedule multiple backup job through windows server backup in windows server 2008 R2
hi expert,
need your help, In my small environment I am using windows 2008 R2 as a domain controller. and installed windows server feature for backup.
Now i want to create backup at a different time.
1. System state backup at 5.00 PM on saturday only
2. finance and hr data backup on daily basis at 5.00 PM.
so how i create different job schedule through windows server backup.
Regards,
Triyambak
Regards, TriyambakScenario #1
The following command will create a Task Scheduler task named
DailyFolder1Backup with the start time of 23:00.
This task will run DAILY with the HIGHESTprivileges. It will run the Windows Server Backup CLI to backup
g:\folder1 to target volume
F:.
SCHTASKS /Create /SC DAILY /TN
DailyFolder1Backup /RL HIGHEST /ST 23:00/TR
"wbadmin start backup –backupTarget:F: -include:g\folder1
-vsscopy -quiet"
Scenario #2
The following command will create a Task Scheduler task named
DailyFolder2Backup with the start time of 24:00.
This task will run DAILY with the HIGHESTprivileges. It will run the Windows Server Backup CLI to backup
h:\folder2 to target volume
F:.
SCHTASKS /Create /SC DAILY /TN
DailyFolder2Backup/RL HIGHEST /ST 24:00/TR
"wbadmin start backup –backupTarget:F: -include:h:\folder2
-vsscopy -quiet"
Please feel free to let us know if you have any question or concern.
Please VOTE as HELPFUL if the post helps you and remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread. -
How to schedule multiple wakes up with Terminal
Hello,
I would like to schedule mutliple wakes up for my iMac, in order to keep the network connection, because after 6 hours of innactivity, it disconnects.
I've read that I could type:
pmset [repeat] [wake] [<MTWRFSU> <6:00:00>]
That way, eveyday at 6am it will wake from sleep. But is it possible to add other ones? If I want to wake my iMac every 4 hours during the day. And if so, how can I manage those settings if I want to remove some schedule wakes?
Regards,You should be able to do this with either Carbon Copy Cloner or SuperDuper!, which allow you to set up scheduled backups:
http://www.bombich.com/index.html
http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html
I use both, but prefer CCC as it also clones the Recovery HD. -
How to schedule multiple imports in one time?
Hi all,
I've got a simple question, which hopefully has a simple answer
Is it possible in the task list (trx SCMA) to schedule imports for all attached logical systems to that maintenance cycle in 1 time, in stead of scheduling imports for each logical system separately?
We've got 10 logical systems in 1 maintenance cycle. And the imports have to be scheduled on the same timings for all of these systems, so eg. from today untill the 14th of June we want a daily import in all attached logical systems of that maintenance cycle.
Is this possible to do this in 1 action?
kind regards,
DavidNo Roel,
I think I took the wrong term. We have several logical system landscapes in 1 maintenance cycle.
For instance:
Maintenance cycle 1 contains:
landscape R3
DEV
QAS
PRD
landscpae BW
BD0
BA0
BP0
landscape SRM
ED0
EA0
EP0
If I want to schedule an import job to import all transports of maintenance cycle 1 in all systems, I have in the above example to schedule 3 jobs. (1 in PRD, 1 in BP0 and 1 in EP0)
The question is whether I can do this by 1 action. Schedule the import of all PRD systems on the maintenance level in stead of the landscape levels separately.
kind regards,
David -
How to handle multiple projects in SingleProject?
hi........Every one.
i have more than 3 projects in Xcode.
i want to merge all projects into a single project & run a single Main project only out of all.
and then user can have choose perticulerProject(app) that will work automatically.
Thanks Inadvance
SrikanthSerlets are already threaded. The application container instantiates the servlet, then uses this instance in a new thread for every use.
This is the reason that you should use (almost) no instance variables in a Servlet, but rather that (almost) everything should be local to the method. -
Multiple Project Scheduling for the project at a same time
Hi Experts,
Is it possible to schedule multiple projects together at a same time. As my client is having more than 5 customer project running all together and he wants to schedule all the projects together so that there is no dates overlapping for similar activities for multiple project. As the activities are dependent on labour and machine and at one particular time the resource could be devoted either on one activity of the project.
I look forward for your revert
Thanks and Regards
SimonHi
One more thing, when i am changing the dates of the activity due to delay from customer end, then where can i see the comparison of old dates and new dates.. though i can see the report in CJ29 but when i change the date in the activity then in the report it shows new date in the new and old date column and does not display the old date in report in the old date column..
Please let me know if i need to do any configuration for that
Regards
Simon -
Menu or keystroke for opening multiple projects simultaneously?
Pages 52-53 of the Getting Started Guide describe how to open multiple projects using the mouse and keyboard together.
It wasn't obvious to me from the user interface that you could even do that, until reading that part of the manual. Has anyone found a keystroke or a menu (or popup menu) that will let you open multiple projects like this (in tabs or separate browsers)? Or do you always have to do the Option/Command-click thingy? (Right-clicking on a project both selects a project and has no menu items for opening the project, which is not what I would expect.)Pages 52-53 of the Getting Started Guide describe how
to open multiple projects using the mouse and
keyboard together.
It wasn't obvious to me from the user interface that
you could even do that, until reading that part of
the manual. Has anyone found a keystroke or a menu
(or popup menu) that will let you open multiple
projects like this (in tabs or separate browsers)? Or
do you always have to do the Option/Command-click
thingy? (Right-clicking on a project both selects a
project and has no menu items for opening the
project, which is not what I would expect.)
I don't think there is a key combo for that, I think the mouse is the only path. Scrolling up or down in the project list always goes to the next project and no modfier keys seem availiable to leave the previous one open... I would be tricky because it would be hard to have a good interface that would let you select non-adjoining projects (since you'd have t skip over other ones without making them active). -
How can I share a *.java source file across multiple projects in NetBeans?
I'm sure this simple and a pretty common operation but how can I share a *.java source file across multiple projects in NetBeans? Right now I keep cut, coping and pasting the same source file between multiple projects to re-use the same code. But I could I make this source file a library file or something like that so that I could access it from any project. I assume this would be a generic operation but I mentioned NetBeans for clarity. Thanks.
fiebigc wrote:
I know I mentioned NetBeans but I'm most interested in the generic method for creating a library of source files that I can call into whatever program I am developing. I've done such a thing in C using header files and such but I'm trying to get a direction on how this is accomplished in Java. I'm sorry if I could edit the title I would. If anyone wants to be specific about NetBeans I welcome that too.
Edited by: fiebigc on Jun 20, 2008 5:57 PM
>I know I mentioned NetBeans but I'm most interested in the generic method for creating a library of source files that I can call into whatever program I am developing. I've done such a thing in C using header files and such but I'm trying to get a direction on how this is accomplished in Java. I'm sorry if I could edit the title I would. If anyone wants to be specific about NetBeans I welcome that too.
Edited by: fiebigc on Jun 20, 2008 5:57 PM
Create a class library.
Write your code, compile it to .class files, put those class files in a .jar file and include the jar file in the classpath whenever you want to compile a project against it.
Maybe you are looking for
-
Blue Screen and Sound Problems, In Desperate Need of Assistance
About a week and a half ago, my computer officially stopped showing anything on the display when I tried to start it up. It had been doing it on and off for a long time, but I would eventually get it to display. Not this time... My husband and I took
-
How to delete one perticular message from a user and not the whole messages
hi i would like to know how can i delete a single message sent by a person and not the complete list of message received by me from the same person also how can i forward a message received by me
-
How to return to the same PLACE on a page after you link to another page
If you are on a long page that contains links, if you click on the link, go to the new page, read, then return to the first page, you are dropped at the top of the page, not where you left from as FF3.* did. It matters because some pages I use have h
-
Force a pdf to open in web browser
Is there a way to make a media (pdf file) open in a web browser rather then download?
-
Carry-forward Calculating Data, but not Updating
Currently having difficulty in getting results to generate for the Balance Carryforward in BPC 7.0M version. Receiving the following in the log message after the logic is executed: Executing SPCOPYOPENING [FINANCE], [ACTUAL], [LC], [SPSCOPE_808950]