How to schedule system defined info package in process chain?

Hi
How to schedule the system defined infopackage in process chain?
Regards
Saddy

Hi Saddy,
Hope the following links will give u a clear idea about process chains and clear ur doubts.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/events/sap-teched-03/using%20process%20chains%20in%20sap%20business%20information%20warehouse
Business Intelligence Old Forum (Read Only Archive)
http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/c08b3baaa59649e10000000a11402f/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/8da0cd90-0201-0010-2d9a-abab69f10045
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/19683495-0501-0010-4381-b31db6ece1e9
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/36693695-0501-0010-698a-a015c6aac9e1
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9936e790-0201-0010-f185-89d0377639db
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3507aa90-0201-0010-6891-d7df8c4722f7
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/263de690-0201-0010-bc9f-b65b3e7ba11c
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
****Assign Points if Helpful****
Regards,
Ravikanth.

Similar Messages

Info Package in Process Chain taking long time

Dear All,
Info Package in Process Chain having 0 records is taking 1 hr 5 mins to complete. Time out time is set to 10 mins.
Does any one of you know the reason why it is happening like this?
Regards.

When the info package status turns to green : final message is :
No data available
Diagnosis
The data request was a full update.
In this case, the corresponding table in the source system does not
contain any data.
System Response
Info IDoc received with status 8.
Procedure
Check the data basis in the source system.
Diagnosis
     The data request was a full update.
     o   In this case, the corresponding tab
             contain any data.
     o   System Response
             Info IDoc received with status
             Procedure
Check the data basis in the source system.
Analysis
========
No data available in the source system for this selection
No further action necessary
When the status was red, I checked BD87 and SM58 and there were no entries.
The corresponding job in sm37 took 869 seconds to complete. Below was the job Log.
Job started
DATASOURCE = 0CO_PC_02
Call customer enhancement BW_BTE_CALL_BW204010_E (BTE) with 0 records
Result of customer enhancement: 0 records
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 0 records
Result of customer enhancement: 0 records
IDOC: Info IDoc 2, IDoc No. 1345319, Duration 00:00:00
IDoc: Start = 24.10.2011 18:29:54, End = 24.10.2011 18:29:54
Synchronized transmission of info IDoc 3 (0 parallel tasks)
IDOC: Info IDoc 3, IDoc No. 1345330, Duration 00:00:00
IDoc: Start = 24.10.2011 18:44:18, End = 24.10.2011 18:44:18
Job finished.
PLease help.
Regards.

Info Package in Process Chain - Performance Issue

Dear All,
We have some Info Package in Process Chain which when triggered initially turns red, then again yellow, after sometime red/green. These status keeps changing and finally results in green status. These infopackage takes 15-30 mins to complete.
And the info package error message shows "Processing time overdue". The chain runs daily and this issue also occurs on a daily basis.
Does anyone one of you have an idea of how to deal with this performance issue?
Regards.

Hi
As you said--
"initially time out time was set to 10 mins, so it was turning red at 10 mins. Later i changed it to 30 mins, then it is turning red at 30 mins, this info package takes maximum 20 mins to complete.
thatsy i asked whether there will be any problem if we remove this time out time."
I guess, its not mandatory to include the timeout value. Just try to execute the IP without entering the timeout value.
It should work.
Let me know if this helps.
Regards
SaiPrasad

Info package in process chain

Hi experts,
I want to create process chain and have created a start process
variant.Now i want to include info package. I drag and dropped the
infopackage and tried to give the infopackage name but it is showing
that there are no infopackages in the bi system. I clicked on
create, a new session of bi system is opened.When i tried to drag
and drop the other objects like dtp it is showing all the dtps in bi
system.
Anyone please explain me how to include info package into a process chain.
Full points will be assigned.
Thanks & Regards,
V N.

Hi Beekay,
Thanks for the reply.
Points assigned.
Please clarify one more doubt.
Normally all say that Inventory data loading is different from other data
loadings. Can i know how and please give me a step by step
procedure for that. I have the data sources as 2lis_03_bf and
2lis_03_um.
Cheers,
V N.

Status of Info packages and process changes become yellow after Unicode con

Dear Friends,
We have been facing very critical issue in Production system after Unicode conversion.
Sequences of Details are provided for your reference.
1. We suspended all BW loads for 48(2 days) hours before Unicode starts and Handover the BW system to Basis.
2. Basis started doing Unicode conversion on BW and they found some standard jobs ( BI_* , Ex: BI_PROCESS_LOADING) which are released status and they assumed that these jobs would run any time so that they suspended all of them but they didnu2019t inform to BW team that they had done. We didnu2019t know that when they did that like pre-Unicode installation, during the Unicode conversion and post Unicode.
3. Basis handover the system to BW team for Unicode testing (we called five finger testing) and we didnu2019t find any issues in the testing. Again we handover the system to Basis for post installations settings for Unicode and back up things. That time we didnu2019t release any jobs to load data to BW because Basis didnu2019t inform us that we can start loads.
4. After post installation is done and basis told us that you can start loads from Monday. Entire Unicode activity had been done on weekend.
5. Before releasing all BW loads to run regularly, I found the all completed process chains status become yellow and I did further detailed analysis to find why; then found some more strange things those are as follows.
          1. Only info packages in process chains are become yellow and other process variants are fine like activation,
               DTPu2019s, index and DB stats.
          2. Requests in PSA which were completed successfully are become yellow.
          3. Info packages in the process chains are successfully completed are not updating correct status instead of green it
              showing yellow because of that other dependent objects are not triggering.
We all thought that suspension of standard jobs must have been caused the problem.
How can we change the status of IPs, PSA and process chains automatically?
We reactivate all PCu2019s and released to run tomorrow.
Could you please share your thoughts about the issue and help us resolve?
Thanks in Advance,
Nageswar.

Nageswar,
A couple of questions :
1. If your previous PC runs were in yellow status - it would not impact furute PC runs..
2. If your IPAKs are in yellow - then you might have an issue with deltas happening since the last status would have been shown as incomplete.
3. Suspension of the standard jobs will not affect the status since the jobs were suspended but not the actual loads i.e the loads were not stopped halfway but only the released jobs were stopped - you might have to schedule the process chains again to get back the old schedule.
Usually in a Unicode conversion - the data is exported out of the DB and imported back - this might have caused some inconsistency in the database for the RS tables used for the monitors.
Which version of BW are you in ..?
were there any errors in the export / import procedure for unicode conversion ?
As part of testing did you check if loads went through properly ..?
Was stats run on the tables after unicode ?
Also if possible regenerate all the indices on the files.
Rerun stats and indices for all RS* tables

How to create info area for process chains?

How to create info area for process chains?

Hi,
If I understand your question clearly, you want to assign display componets.
once you have created you chain you assign the components by clicking CTRL+F11
Regards,
Namrata

How to implement an abap program in a process chain

Hi,
I have an ABAP Program which uploads data into a table.
Now I want to implement this abap program in a process chain.
Please could anyone tell me how this can be done.
Thanks & Regards,
Sushanth H.S.

Hi,
A process chain is a background task for processing data into a BW instance .
I want to know how to integrate an abap program into the process chain.
Regards,
Sushanth H.S.

How i run that delta infopackage in my process chain

Hello Sir,
i have a delta infopackage which sciduled in a process chain but it does not pick any delta i have to manualy run repair full infopackage dally and then delta comes in to picture my target is a dso so it does't have any problem.
the datasourse is costamize
delta pointer is cal day
my question is how i run that delta infopackage in my process chain
Thanks...

Hi
IS the process type "delta infopackage " is executing in the process chain or not? Plz once check in SM37 Tcode . and Why r u running the repair full request infopackage . If u miss any delta records then only u have to run the repair full request . If delta records are not extracted then better to manually extract the delta infopackage.
Plz once check in SM37 Tcode whether the execute infopackage process step is running or not? or any error has occured in that PC.
Thanx & Regards,
RaviChandra

How to find a metachain name from local process chain id or name

how to find a metachain name from local process chain id or name

Hi Dwarakanath,
Please post your query in the correct topic space in SCN. For help, see this document:
Find Topic Spaces on SCN (Forums)
Thanks,
Kristen

Difference between Scheduled and released with respect to process chains

HI All,
I am Creating a cube in whcih I want to upload the current status of the process chain.
And the requirement is not to take those process chains whcih are scheduled and not released( only take those process chains whcih have status released)
for the same I dont know what is the difference between Scheduled and Released in respect of process Chains and also from whcih Database table I can get this information.
Please help.
Regards,
Ujjwal

Hi,
Job Status Scheduled means a job has been created and is ready to run but has not yet been triggered.
A release status means the created job has been triggered and is waiting for the opportunity to run. A job can be in released status when it is a periodic Job ( Where once the job is completed it goes to release status), when it is slated for future execution, or when there is a delay due to database overload.
Regards,
Pramod

How to extract System/Client Info from R/3

Hi All,
Can somebody tell me how do we get the system/client information along with our transaction data coming from two R/3 systems during extraction? If it is possible or not?
If yes in which R/3 table we can find that information?
Regards,
Pooja

Hi Pooja,
The Source System is very specific for each info package . So when you create a infoPackage you are aware about the source System. So add 0SOURSYSTEM in the infoSource and make it a constant value(hard code it).
Hope you got it
Regards
Happy Tony
<b>Points == Thanks</b>

How to delete system-defined attributes (e.g. author...)?

As title.
I can't find any ways to delete those system defined attributes like author, description and etc.
Thanks.

Thanks for your quick response. Which tool (iTunes?) would you recommend to use on the PC (Windows 7) to select the photos I want to delete?

How to identify an event that trigger a process chain.

Hi,
I have a process chain, which starts after the an event is triggered.
How to find out where this event is triggered.
Cheers
Senthil

Hi Senthil,
When it comes to event based chains there could be many scenarious:
1) There is an event collector which collects some events and then triggers the subsequent event.
In this case Right Click on the start variant of the process chain and then display scheduled Job. You get the released Job and then double click on that released Job it will show you the event that triggers this chain.
Then take this event and go to table RSEVENTHEAD and then place this event in field EVENT_OK then execute then in the field CHAIN_ID you get the name of the event collector. Then take this event collector in RSA1 --> Tools --> Event Collector and search it gives all the event collected in this.
2) The event based chain has no event collector and the event can be triggered from another chain or any other Job from the same system or any other system.
In those cases you need to be aware of the dependency but there is no hardcore rule to derive the event from where it triggers.
Also search the event in SM62 it could be of some use.
Cheers,
Neelesh Jain,

How do we raise an event to trigger process chain in BI

Hi Guru's,
I am having Oracle tables as one of my source systems, I developed the code using DBConnect.
Now i need to run my Process chain when ever table get data from downstream systems.
how do we raise an event to trigger the process chain in BI WHEN EVER ORACLE TABLE GET DATA?
Thanks in Advance,
Edited by: Naveen Kumar Kencha on Apr 2, 2008 11:21 PM
Edited by: Naveen Kumar Kencha on Apr 2, 2008 11:27 PM
Edited by: Naveen Kumar Kencha on Apr 2, 2008 11:27 PM

Hi Naveen,
i think we use ABAP program under general services to generate an event.
searching form gave me following threads which might be helpfull
1) explains Evenet generation [Event raising procedure]
other helpfull threads
[Standard tools for Event raising]
[Event in Process Chain]
i could get the process for triggering it weekly,,,it may giv u some help in resolving
change the Start Process (1st process) in your Process Chain to trigger it to start after the event. To do this, maintain the Start Process of your Process Chain. Select "Direct Scheduling" and click the "Change Selections" icon. This will bring up a Start Time window. Click the "After Event" icon and enter your event name. Also, click the "Periodic Job" (this will insure that all the jobs created for each process in the Process Chain will reschedule themselves after executing the first time). Now save the Start Process, and reactivate and schedule the Process Chain.
To execute the Process Chain, use transaction SM64 to trigger the event.
If you want to trigger the event in batch, you will need to create an ABAP program that calls function module BP_EVENT_RAISE (sample ABAP code is available in this forum if you search for "BP_EVENT_RAISE").
We create batch jobs where we call an external program called SAPEVT, located on the server, and I believe is available on all SAP clients, with the following parameter:
EVTID('WEEKLY_PROCESS') SID(PU3) NUMBER(00) EVTPARM()
This will trigger the event WEEKLY_PROCESS.
See if this helps.
regards,
NR

How to manage the "no data" loading in process chain

Hi,
I want to load some master data in delta mode with a process chain. The treatment works good except in one case.
If I have no data selected during the extraction ( cause the system doesn't find any data matching with the delta field ), the process chain appears in red as if some problems was encountered instead of giving a traffic light green.
How is it possible to manage this case of treatment as a normal treatment ?
Thanks for your help.

Marc,
in RSMO ,
Using Settings -> Evaluation of Requests ->
if no data is available in the system, the request
select Green (is Judged to be successful). this will cause the load to be successful if Zero records are fetched and the Process chain will not fail.
Cheers
Tushar

How to schedule system defined info package in process chain?

Similar Messages

Maybe you are looking for