How to search for a device by IP Address in ACS 5.1

Hi,
I have over 800 devices added to the ACS 5.1. Now if i have to find a device for any purpose in the Network Resources>Network Devices and AAA Clients>. I can only filter using Name, NDG Location/Device Type, and description. Is there a way to find it with the IP Address?
Thanks

Similar Messages

How to search for BT device automatically every x seconds?

I have a Trust BT-2100p which came with the Toshiba Bluetooth software.
I can connect my Bluetooth remote control to my HTPC, but when I disconnect and want to reconnect again, I have to right click on the device, press "connect" and then "OK" in the popup window before it starts searching.
The whole point with the remote is that I don't need a keyboard or a mouse.
I can make a simple .bat-file that starts the connection automatically every x seconds, but it can't press the "OK" button.
Is there a way to make it search for the device automatically every x seconds?

HID devices are automatically connected as soon as a button was pressed on it. I checked the internet regarding your WII devices. The problem in your case is that this devices supports a none standard function which must be configured first in oder to reconnect by HID automatically. So this has to be done by the software which you mentioned. It has to configure the controller which should be used. This device support 4 of it.

Search For Bluetooth Devices

I dont know how to search for bluetooth devices on nokia e65. Need to set up a handsfree car kit with it. Where do i go on the phone to search for bluetooth devices??

Hi lindi9
Select Menu > Connect > Bluetooth.
1. When you activate Bluetooth for the first time, you are asked to give a name to your device. Give your device a unique name to make it easy to recognize if there are several Bluetooth devices in the vicinity.
2. Select Bluetooth > On.
3. Select My phone's visibility > Shown to all.
Happy to have helped forum in a small way with a Support Ratio = 37.0

I have iphone 6 with ios 8.1.1. The bluetooth pairs with my sony car radio and everything works fine. However, the iphone won't stop searching for other devices.

I have an iPhone 6 with ios 8.1.1 operating system. The Bluetooth pairs with my Sony car radio and works fine. However, the iPhone will not stop searching for other devices. This does not seem to affect anything, but I can't help but think it is using battery power.

One possibility:
How do you know it is searching for other devices? Because you opened Settings > Bluetooth?
Why is it searching for other devices? Because you opened Settings > Bluetooth?

Search for wireless devices display

Some how I managed to get up the circular display screen with a rotating line which displayed all available devices. Now its gone, and I cannot get it up. I left click on the taskbar icon and 'search for wireless devices' but only get the small display. anyone help please?

Hi again
I think that it is not the reason why you can not start this application. You can configure the wireless connection on two simply ways. First one is to use windows settings (like in your case) or you can use some client to do this. In this way the windows option must be disabled.
As far as I know the ConfigFree tool is no a client. This tool can help you to get more precise information about your LAN or wireless connection. Like you can see there you can create some profiles and enable or disable all hardware components that your unit use for communication with other external devices.

I have the new iphone 4S (this is my first iphone) I am having trouble connecting to my bluetooth device - the iphone is searching for the device but won't recognize it (my bluetooth device is a jawbone)

My iphone 4s does not recognize my bluetooth device - I don't know why
My bluetooth device is a jawbone and I have turned it on and sitting next to my iphone which is searching for bluetooth devices but will not recognize it
Not sure why

dugasgre wrote:
Thanks for the advice
I just tried turning the jawbone off and then turning it on and shaking it 4 times but the iphone 4s still won't recognize my jawbone
Do I need to unpair the jawbone from my blackberry first? And if so, how do I do that?
so after double shaking, is the ring flashing red +white? If it is not, then it is not in pairing mode. (I'm assuming you have the ERA) And you see nothing on the iphone? Nothing is found? Or is the device found, but not paired.
try placing the jawbone in pairing mode first, and then turn off/on the iphone blue tooth.
I don't think you need to unpair with the BB. But you can try. go to BB settings and there should be a way to forget the device.

Bluetoothe keeps searching for new devices

Hi everyone,
I have a BT connected problem with my Iphone 4S. In contrast to many here, I can connect with my headset (Jawbone) fine and my phone sees pretty much anything. However, once I activate BT, it will keep searching for new devices all the time and this eats the batter up pretty fast (by mid-day it is 50% gone, without my doing much, except for a few calls using my headset). Does anybody know how can BT stopped from looking for new devices unless directed to do so?
Many thanks and best regards,
Ed Moses

Solved : I changed the name of my Aperture Library and it works now…

How to search for file in jsp page

i need help on how to search for a file in a folder where there is a lot of subfolder.like how u search in a document in windows. i need a complete codes in jsp page.
thank you in advance.
Message was edited by:
n_dilah

no i need to do a search engine in jsp page which is the j2ee.
i type smth than tat file from any folder will appear the same way when u need to search your file in a document in windows.
well can u nice people tell me where i can get the codes bcos i stinks when it come to programming.
thank you very very very much.

How to search for a BADI in a transaction

Hi All,
Please let me know the steps to find a BADI for a transaction.
Thanks,
Jaffer Ali.S

check this.
u can find BADI's in different ways...
1>First go to any transaction->iN THE menu bar SYSTEM->STATUS->Get the program name ->double click->u will go to the program attached to the tcode.Now search term will be CALL CL_EXITHANDLER.Now u will get list of BADI'S available..
2>Goto SE24->Give class name as CL_EXITHANDLER->Display->double click on get_instance mathod->Now u will go inside the method->Now put break point on the cl_exithandler.Now go to any transaction code and pass dat..U will see that it will be stopped on the break point which u set on the cl_exithandler...In the exit name u can find list of badi's attached to the tcode..
There are multiple ways of searching for BADI.
Finding BADI Using CL_EXITHANDLER=>GET_INSTANCE
Finding BADI Using SQL Trace (TCODE-ST05).
Finding BADI Using Repository Information System (TCODE- SE84).
1. Go to the Transaction, for which we want to find the BADI, take the example of Transaction VD02. Click on System->Status. Double click on the program name. Once inside the program search for CL_EXITHANDLER=>GET_INSTANCE.
Make sure the radio button In main program is checked. A list of all the programs with call to the BADIs will be listed.
The export parameter EXIT_NAME for the method GET_INSTANCE of class CL_EXITHANDLER will have the user exit assigned to it. The changing parameter INSTANCE will have the interface assigned to it. Double click on the method to enter the source code.Definition of Instance would give you the Interface name.
2. Start transaction ST05 (Performance Analysis).
/people/alwin.vandeput2/blog/2006/04/13/how-to-search-for-badis-trace-it
3. Go to Maintain Transaction (TCODE- SE93).
Enter the Transaction VD02 for which you want to find BADI.
Click on the Display push buttons.
Get the Package Name. (Package VS in this case)
Go to TCode: SE84->Enhancements->Business Add-inns->Definition
Enter the Package Name and Execute.
Here you get a list of all the Enhancement BADIs for the given package MB.
The simplese way for finding BADI is
1. chooes Tcode Program & package for that Tcode.
2. Go to Tcode se18
3. Press F4
4. search by package or by program.
Regards
Kiran Sure

How To Search For a Specific File name?

Hello Everybody
How To Search For a File Like NewFile.txt in a Root Like C:\\
And If The File Is Found Open It And Write In It?

http://forum.java.sun.com/thread.jspa?threadID=5194090&messageID=9763314

How to search for a fields ?

Hello,
I know it's an easy question but I've not find, how to search for a fields in Database on CR XI R2 ?
Thanks in advance

Hi Alexandre
Do you want to see which database fields you have inserted in Crystal Reports and in which section you have inserted what fields?
If yes then
-open formula editor
-In the right side pane expand Formatting Formulas.
-Expand all the sections one by one and it will show you database fields,formulas and all the objects used in the sections.
Hope this will clarify your doubts.
Regards
Asha.

How to search for a certain cross reference using its name in FM 11?

How to search for a certain cross reference using its name in FM 11?

Well, thank you. I am only using Find dialog box. By "name", I'd like to give an example. The background is FM 11 structured. I have an element "xref" which is used to make cross reference. Now In Chapter 1, there is a sentence like "This is an ODU for ...". I made a cross ref of the word "ODU" to its full name "outdoor unit" in Chapter 2 (in the same book). After this, the word "ODU" in the sentence in Chapter 1 will no longer be a plain text. So I no longer can use the find dialog box to search for "ODU" because it is already an xref rather than text. I am not if it's clear.

How to search for a badi

how to search for a badi
srinivas.

Hi Srinivas,
Good
Check this link
/people/alwin.vandeput2/blog/2006/04/13/how-to-search-for-badis-trace-it
Run this program
*& Report ZNEGI16 *
REPORT ZNEGI16 .
TABLES : TSTC,
TADIR,
MODSAPT,
MODACT,
TRDIR,
TFDIR,
ENLFDIR,
SXS_ATTRT ,
TSTCT.
DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA : FIELD1(30).
DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS : P_TCODE LIKE TSTC-TCODE,
P_PGMNA LIKE TSTC-PGMNA .
DATA wa_tadir type tadir.
START-OF-SELECTION.
IF NOT P_TCODE IS INITIAL.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
ELSEIF NOT P_PGMNA IS INITIAL.
TSTC-PGMNA = P_PGMNA.
ENDIF.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR
WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR
WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR
WHERE FUNCNAME = TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
WHERE PGMID = 'R3TR'
AND OBJECT in ('SMOD', 'SXSD')
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT
WHERE SPRSL EQ SY-LANGU
AND TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(105) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
Sorting the internal Table
sort jtab by OBJECT.
data : wf_txt(60) type c,
wf_smod type i ,
wf_badi type i ,
wf_object2(30) type C.
clear : wf_smod, wf_badi , wf_object2.
Get the total SMOD.
LOOP AT JTAB into wa_tadir.
at first.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Enhancement/ Business Add-in',
41 SY-VLINE ,
42 'Description',
105 SY-VLINE.
WRITE:/(105) SY-ULINE.
endat.
clear wf_txt.
at new object.
if wa_tadir-object = 'SMOD'.
wf_object2 = 'Enhancement' .
elseif wa_tadir-object = 'SXSD'.
wf_object2 = ' Business Add-in'.
endif.
FORMAT COLOR COL_GROUP INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 wf_object2,
105 SY-VLINE.
endat.
case wa_tadir-object.
when 'SMOD'.
wf_smod = wf_smod + 1.
SELECT SINGLE MODTEXT into wf_txt
FROM MODSAPT
WHERE SPRSL = SY-LANGU
AND NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
when 'SXSD'.
For BADis
wf_badi = wf_badi + 1 .
select single TEXT into wf_txt
from SXS_ATTRT
where sprsl = sy-langu
and EXIT_NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED ON.
endcase.
WRITE:/1 SY-VLINE,
2 wa_tadir-OBJ_NAME hotspot on,
41 SY-VLINE ,
42 wf_txt,
105 SY-VLINE.
AT END OF object.
write : /(105) sy-ULINE.
ENDAT.
ENDLOOP.
WRITE:/(105) SY-ULINE.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No.of Exits:' , wf_smod.
WRITE:/ 'No.of BADis:' , wf_badi.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'No userexits or BADis exist'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
data : wf_object type tadir-object.
clear wf_object.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(8) EQ 'WA_TADIR'.
read table jtab with key obj_name = sy-lisel+1(20).
move jtab-object to wf_object.
case wf_object.
when 'SMOD'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
when 'SXSD'.
SET PARAMETER ID 'EXN' FIELD SY-LISEL+1(20).
CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
endcase.
Solution 2
1.Get the Package of the program name of the transaction.
2.Go to Transaction SE18.
3.Press F4 on the badi definition name.
4.Click the information systems button.
5.Give the Package name and press enter.
6.Select the BADI that is relevant to the application.
Good Luck and thanks
AK

How to search for a particular word in a string?

How to search for a particular word in a string?
thanks for your help....

This works fine.
public class Foo {
    public static void main(String[] args) {
    String s = "Now is the time for all good...";
    String s2 = "the time";
    System.out.println(s.contains(s2));
    System.out.println(s.contains("for al"));
    System.out.println(s.contains("not here"));
}output:true
true
falseYou must have something else wrong in your code.
JJ

How to search for a particular word in a long document?

How to search for a particular word in a long document?

What program are you using to read the document?
Good luck.

How to search for a device by IP Address in ACS 5.1

Similar Messages

Maybe you are looking for