How to search for a process chain in RSPC ?

Hi,
Is there any way that i can find a process chain by giving the name of the variant.
I know that i can click on the DTP and from there i can go to the process chain if i know the DTP.
But here my problem is that i have a program which is calling a process chain now i what to what this process chain is doing.
Is there any way to find it?
Thanks in advance.
Reagrds,
Raghu

Hi Surendra,
Thanks for the inputs. Thanks for sharing some useful table names.
But this haven't solved my issue.
I have the below mentioned code in a program.
CALL FUNCTION 'RSPC_CHAIN_START'
       EXPORTING
         I_CHAIN             = 'YPC_VARIANT_FOODS'
       I_T_VARIABLES       =
       I_SYNCHRONOUS       =
       I_SIMULATE          =
       I_NOPLAN            =
      IMPORTING
        E_LOGID             = LOGID.
Now i want to see the Process chain ( 'YPC_VARIANT_FOODS' ) in RSPC.
Actually 'YPC_VARIANT_FOODS' is a variant.
Any way to achieve this?
Thanks,
Raghu

Similar Messages

How to check the parent process chain of a meta chain

Hello Friends,
Recently I joined a new project, which is of environment BW 3.0. I am trying to find the dependent process chain's parent, but could'nt able to find them. I went through all the process chains manually to check whther the dependent process chain is mentioned in them, but could'nt find any......
Can any of you help me to know how to find the parent process chain of a meta chain ?
I really appreciate your time, will be awarding points to any answers.......
Thanks,

Hello Radhan,
thanks for your quick reply. I searched the table based on your advice, but i could'nt get the parent process chain's name. Can you throw some more ideas please..........
Thanks,

Any ideas on this plan for a process chain?

Hi,
I have 6 ODSes. I load these on a daily basis with 6 different flat files. ODS1, ODS2 and ODS3 needs to be loaded first before ODS4, ODS5, ODS6.
Once all six ODSes are loaded, they are then aggregated based on some two key fields to and loaded into a cube. Npw I want to automate the process.
Can you please check if my plan for the process chain is right:
1. Start Process:
direct Scheduling
Change Selections:
Start date & Time
Period Jobs: check
Periodic Values: Daily
Restrictions: Always execute job
2. Indexes:(this flows into the first 3 ODSes)
Delete indexes
3. Load Data:
Load Data ODS1
Load Data ODS2
Load Data ODS3
4. Activate ODS1
5. Activate ODS2
6. Activate ODS3
(? What do I setup here so that the following will be loaded only if ODS1, ODS2 and ODS3 are successful)
7.Load Data
Load Data ODS4
Load Data ODS5
Load Data ODS6
8.Delete Indexes
9. Load Data
Load data from ODS1, ODS2, ODS3, ODS4, ODS5, ODS6 to the CUBE
10.Activate Cube (?Needs to activate cube? Is there a process type like that of activate ODS)
11. Create Index (Hm, will the Delete and create indexes in this plan take apply to both ODS and Cube)
Thanks, I will lovr to get hint from you. How do I factor in PSA? i.e. To always go to PSA then to ODS and Cube?

Hi,
1.Start the process.(as per your requirement)
2. Load the data to ODS in parallel (ODS1 , ODS2 & ODS 3)
3. Activate the three ODS , with separate ODS activation process type.
4.Put an AND condition
5. load data to ODS4 ,5 and 6
6. Activate ods4 ,5, & 6.
7. delete index for cube
8. load different data from ods to cube
9. create index.
                start
load ODS1 -- Load oDS2 -- Load ods 3
Activate ODS1 - Activate oDS2 - Activate ODS3
                 AND (process)
Load oDS4      load ods5    load ODS 6
Activate oDS4 Activate ODS5 Activate ODS 6
                 AND
          Delete the index
           Load data from different ODS to cube
            Create Index
   there is no concept of activating the cube .. it is only applicable to ods.
Regards,
Siva.

How to create document in process chain

Hi,
can u plz tell me how to create document in process chain and wat i need to edit the text for particular info package when document.

Hi Anil,
Goto Tcode:RSPC and select your load data process type where you have to right click on the process chain and select Select create message,there are three types of messages
1>Successful
2>Error
3>Always
If you already created message then go to maintain message
Where you have two buttons
1>is for Edit Document
2>Maintain Recpiants
Goto Edit Document and put your comment and set their mail address in Mail recipiants.
Note there are 2 types of messages you can kept at execution of infopackage process type.
If load is successful send the mesaage to recipients
If load is failed send the message to mail recipt.
It would help you.

Explain: how to include Infospoke in Process Chain where destination is DB

Explain: how to include Infospoke in Process Chain where destination is local machine database [NOT Flatfile]

Hi vijay,
First you create an Infospoke with destination as a DB table in your local BI or BW Machine. Now add this infospoke by going through below steps.
1. Call up the process chain maintenance. Choose This graphic is explained in the accompanying text Process Chain Maintenance from the Administrator Workbench toolbar. The Process Chain Maintenance Planning View screen appears.
2. In the left-hand screen area of the required This graphic is explained in the accompanying text display component, navigate to the process chain in which you want to insert your InfoSpoke. Double-click to select it. The system displays the process chain plan view in the right-hand side of the screen.
If no suitable process chain is available, you need to create a new process chain. You can find additional information under Creating a Process Chain.
3. To insert a process for extraction by means of an InfoSpoke, choose This graphic is explained in the accompanying text Process Types in the left-hand area of the screen. The system now displays the process categories available.
4.In the process category Loading Process and Post Processing, choose the application process type This graphic is explained in the accompanying text Data Export into External Systems.
5.Insert the Data Export into External Systems application type with Drag&Drop into the process chain. The dialog box for inserting a process variant appears.
6.In the Process Variant field, enter the name of the InfoSpoke that you want to include in the process chain, or select it by means of the input help.
Once You have added the infospoke you have to write a program which will fetch the database table that you filled and transfer the data fetched to other legacy system with the help of XI System
For more information on how to infospoke on 3rd party pls find the link below
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5f12a03d-0401-0010-d9a7-a55552cbe9da
Hope this help
Harish

Implementing a custom process type for a process chain

I have created a custom process type for a process chain that allows a user to send back a failure or error status when calling an ABAP program. I copied the class that is used from the existing ABAP process type as a template.
The process type works fine, I just cannot find out how to recreate the documentation for my custom type using free text. When you maintain the process type there is a field for the documentation object, but I can't find where in SAP to implement this.
I have tried looking at the document maintenance using SE61 and looking into the class documentation from SE24 with no success. The only detail that is provided in the SAP help portal is:
"If necessary, assign a documentation type and a docu. object to the process type. The docu object can be called up via F1 in the process chain maintenance overview tree. "
Does anyone out there have any experience with this that can push me in the right direction?
Thanks,
Eddie

You can create and maintain system documentation from transaction SE61. This is how you would create documentation for a process type or if you wanted to create a book. <a href="http://help.sap.com/saphelp_nw04/helpdata/en/a4/d47df949e111d189730000e8322d00/frameset.htm">more info</a>
Here are the steps to make your documentation similar to that used for the ABAP process type:
From transaction SE61:
-Create a document of type TX (either from scratch or by copying RSPC_ABAP which is used for the SAP-delivered ABAP process type)
-Make any changes you need. I suggest downloading the document in ITF format and make the changes in a basic text editor and then uploading your changed document. It's a little easier to tell what is going on that way.
Now on to transaction RSPC.
Once you save your changes, go to RSPC and select on any chain you have to get into the "plan and check views of process chain maintenance." Then just go to Settings -> Maintain Process Types.
From here you can select your process type, select TX from the document type dropdown, and then enter the name of your document in the docu. object field.
Hope that helps.

How can we set a process chain to trigger the nodes w/o manual intervention

SDNers,
We have a Master PC which has the loading & activation of some Hierarchies.Wats happening is some of the hier activations are failing (we got track of the root cause as well) and the nodes below are not getting triggered automatically, eventhough they have been designed to get triggered irrespective of success or failure of this hierarchy activation. The chain prompts for the u2018Status change & trigger the following eventsu2019 opo-up and only when it was said u2018yesu2019, the subsequent node gets triggered in the chain. If this manual intervention was not there, the Chain gets struck at the activation node, whic is running in yellow status for long, though a short dump - error has already been thrown.
My query is how can we set a process chain not to anticipate the manual intervention of chnaging the status & trigger events pop-up

Hi ravi,
i'm not sure abt the query but what i got thru ur qustion is u have to automtaically go to the next load/step even the proceess chain fails in the step......
for that we have the same master meta chains with link of so many local chains...for this even if there are some interventions/fails in between the process chains it never gets stopped....
it goes to the next step and we'll work, analyse and finish the failed load manually....the next day it'll be
fine...
b4 to this make sure that there is no dependency for the previous loads....
And now the solution i found for this is in the process chain design itself.......
while giving the links itself we'll be getting the options as status RED,GREEN and RED(or)GREEN.....now if u got for the third option the event goes to the next step even it is unsuceesful....
rgds,
nkr.

How can u know the process chain total time, individual time?

Hi guru's
How can u know the process chain total time, individual time?
and what options will available in sm37?
Thanks
prabha reddy

Hi Prabha
Iam not very sure about total time and individual times.
But you can go to tcode rspcm for monitoring the daily process chains. it gives you details like 1. status 2.start date & time 3. Log ID of each process chain.
or you can go to log view of particular individual chain to know how long it has run.
SM37: tcode for simple job selection.
here you check the status of job.
you can select for certain conditions like
1. scheduled
2. released
3. ready
4.active
5. cancelled
Assign points if it was helpful
Revert back if you need further info/
regards
AP

How can we delete a process chain?

Dear Ones,
By Mistake I have converted an infopackage group into process chain in Quality system. How can we delete a process chain?
Thanks,
Raj

Hi Bhanu,
I've doubt that what is the difference between cancel with core and cancel without core with respect to process chain.
Could you please advice how do we start a process chain daily without using the schedular window for transaction data.
Thanks in advance...
Amarnath.

How to search for file in jsp page

i need help on how to search for a file in a folder where there is a lot of subfolder.like how u search in a document in windows. i need a complete codes in jsp page.
thank you in advance.
Message was edited by:
n_dilah

no i need to do a search engine in jsp page which is the j2ee.
i type smth than tat file from any folder will appear the same way when u need to search your file in a document in windows.
well can u nice people tell me where i can get the codes bcos i stinks when it come to programming.
thank you very very very much.

How to stop the running process chain

How to stop the running process chains or infopackges...just qm status change is enought?

BI - SM 37 - Kill the Job
ECC - SM 50 - Kill the job

How to search for a BADI in a transaction

Hi All,
Please let me know the steps to find a BADI for a transaction.
Thanks,
Jaffer Ali.S

check this.
u can find BADI's in different ways...
1>First go to any transaction->iN THE menu bar SYSTEM->STATUS->Get the program name ->double click->u will go to the program attached to the tcode.Now search term will be CALL CL_EXITHANDLER.Now u will get list of BADI'S available..
2>Goto SE24->Give class name as CL_EXITHANDLER->Display->double click on get_instance mathod->Now u will go inside the method->Now put break point on the cl_exithandler.Now go to any transaction code and pass dat..U will see that it will be stopped on the break point which u set on the cl_exithandler...In the exit name u can find list of badi's attached to the tcode..
There are multiple ways of searching for BADI.
Finding BADI Using CL_EXITHANDLER=>GET_INSTANCE
Finding BADI Using SQL Trace (TCODE-ST05).
Finding BADI Using Repository Information System (TCODE- SE84).
1. Go to the Transaction, for which we want to find the BADI, take the example of Transaction VD02. Click on System->Status. Double click on the program name. Once inside the program search for CL_EXITHANDLER=>GET_INSTANCE.
Make sure the radio button In main program is checked. A list of all the programs with call to the BADIs will be listed.
The export parameter EXIT_NAME for the method GET_INSTANCE of class CL_EXITHANDLER will have the user exit assigned to it. The changing parameter INSTANCE will have the interface assigned to it. Double click on the method to enter the source code.Definition of Instance would give you the Interface name.
2. Start transaction ST05 (Performance Analysis).
/people/alwin.vandeput2/blog/2006/04/13/how-to-search-for-badis-trace-it
3. Go to Maintain Transaction (TCODE- SE93).
Enter the Transaction VD02 for which you want to find BADI.
Click on the Display push buttons.
Get the Package Name. (Package VS in this case)
Go to TCode: SE84->Enhancements->Business Add-inns->Definition
Enter the Package Name and Execute.
Here you get a list of all the Enhancement BADIs for the given package MB.
The simplese way for finding BADI is
1. chooes Tcode Program & package for that Tcode.
2. Go to Tcode se18
3. Press F4
4. search by package or by program.
Regards
Kiran Sure

How To Search For a Specific File name?

Hello Everybody
How To Search For a File Like NewFile.txt in a Root Like C:\\
And If The File Is Found Open It And Write In It?

http://forum.java.sun.com/thread.jspa?threadID=5194090&messageID=9763314

How to search for a fields ?

Hello,
I know it's an easy question but I've not find, how to search for a fields in Database on CR XI R2 ?
Thanks in advance

Hi Alexandre
Do you want to see which database fields you have inserted in Crystal Reports and in which section you have inserted what fields?
If yes then
-open formula editor
-In the right side pane expand Formatting Formulas.
-Expand all the sections one by one and it will show you database fields,formulas and all the objects used in the sections.
Hope this will clarify your doubts.
Regards
Asha.

How to search for a certain cross reference using its name in FM 11?

How to search for a certain cross reference using its name in FM 11?

Well, thank you. I am only using Find dialog box. By "name", I'd like to give an example. The background is FM 11 structured. I have an element "xref" which is used to make cross reference. Now In Chapter 1, there is a sentence like "This is an ODU for ...". I made a cross ref of the word "ODU" to its full name "outdoor unit" in Chapter 2 (in the same book). After this, the word "ODU" in the sentence in Chapter 1 will no longer be a plain text. So I no longer can use the find dialog box to search for "ODU" because it is already an xref rather than text. I am not if it's clear.

How to search for a process chain in RSPC ?

Similar Messages

Maybe you are looking for