How to search for a qualifier field?

Hello Experts,
I have a field of type Lookup[qualified flat] in the MDM main table. The lookup table has 5-6 fields, some are qualifier and some are non-qualifier. I want to perform a search which is combination of qualifier as well as non-qualifier fields of the lookup table.
For non-qualifier I have used FieldSearchDimension for non-qualifier field and QualifierSearchDimension for qualifier filed. But I am not getting the expected result. Could you please help.
Pictorially the scenarion is like:
MDM Main Table-> Field X(lookup[qualified flat])
Field X - Sub Field X1[qualifier - no]
- Sub Field X2[qualifier - yes]
Search criteria : Combination of Sub field X1 and sub field X2.
Thanks in anticipation!
Rakesh

Hi Rakesh,
Adopt a drill down mechanism while using a Qualified lookup search.
In Datamanager, search parameters for a qualified lookup table appear as 3 distinct boxes - one below the other -
Box 1 : Look ups in Non qualifiers and their values
Box 2 : Qualified field : Displays all the valid Qualified field values that exist for a main table record.
Box 3: Qualifiers and their Values.
In your case, Sub Field X1( Non Qualifier) will appear in Box 1 ; Sub Field X2 (qualifier) will appear in Box3.
To achieve the expected search you want follw the below steps in seq :
1. Select Sub Field X1( Non Qualifier) in Box 1 and then select its lookup value.
2. Select Sub Field X2 (qualifier) in Box3 and then select its lookup value.
You will have your combination search results visible. To cross check the selection you have made, select 'Search Selections' tab and verify.
Regards,
Vinay

Similar Messages

How to search for a fields ?

Hello,
I know it's an easy question but I've not find, how to search for a fields in Database on CR XI R2 ?
Thanks in advance

Hi Alexandre
Do you want to see which database fields you have inserted in Crystal Reports and in which section you have inserted what fields?
If yes then
-open formula editor
-In the right side pane expand Formatting Formulas.
-Expand all the sections one by one and it will show you database fields,formulas and all the objects used in the sections.
Hope this will clarify your doubts.
Regards
Asha.

How to search for a badi

how to search for a badi
srinivas.

Hi Srinivas,
Good
Check this link
/people/alwin.vandeput2/blog/2006/04/13/how-to-search-for-badis-trace-it
Run this program
*& Report ZNEGI16 *
REPORT ZNEGI16 .
TABLES : TSTC,
TADIR,
MODSAPT,
MODACT,
TRDIR,
TFDIR,
ENLFDIR,
SXS_ATTRT ,
TSTCT.
DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA : FIELD1(30).
DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS : P_TCODE LIKE TSTC-TCODE,
P_PGMNA LIKE TSTC-PGMNA .
DATA wa_tadir type tadir.
START-OF-SELECTION.
IF NOT P_TCODE IS INITIAL.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
ELSEIF NOT P_PGMNA IS INITIAL.
TSTC-PGMNA = P_PGMNA.
ENDIF.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR
WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR
WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR
WHERE FUNCNAME = TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
WHERE PGMID = 'R3TR'
AND OBJECT in ('SMOD', 'SXSD')
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT
WHERE SPRSL EQ SY-LANGU
AND TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(105) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
Sorting the internal Table
sort jtab by OBJECT.
data : wf_txt(60) type c,
wf_smod type i ,
wf_badi type i ,
wf_object2(30) type C.
clear : wf_smod, wf_badi , wf_object2.
Get the total SMOD.
LOOP AT JTAB into wa_tadir.
at first.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Enhancement/ Business Add-in',
41 SY-VLINE ,
42 'Description',
105 SY-VLINE.
WRITE:/(105) SY-ULINE.
endat.
clear wf_txt.
at new object.
if wa_tadir-object = 'SMOD'.
wf_object2 = 'Enhancement' .
elseif wa_tadir-object = 'SXSD'.
wf_object2 = ' Business Add-in'.
endif.
FORMAT COLOR COL_GROUP INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 wf_object2,
105 SY-VLINE.
endat.
case wa_tadir-object.
when 'SMOD'.
wf_smod = wf_smod + 1.
SELECT SINGLE MODTEXT into wf_txt
FROM MODSAPT
WHERE SPRSL = SY-LANGU
AND NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
when 'SXSD'.
For BADis
wf_badi = wf_badi + 1 .
select single TEXT into wf_txt
from SXS_ATTRT
where sprsl = sy-langu
and EXIT_NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED ON.
endcase.
WRITE:/1 SY-VLINE,
2 wa_tadir-OBJ_NAME hotspot on,
41 SY-VLINE ,
42 wf_txt,
105 SY-VLINE.
AT END OF object.
write : /(105) sy-ULINE.
ENDAT.
ENDLOOP.
WRITE:/(105) SY-ULINE.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No.of Exits:' , wf_smod.
WRITE:/ 'No.of BADis:' , wf_badi.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'No userexits or BADis exist'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
data : wf_object type tadir-object.
clear wf_object.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(8) EQ 'WA_TADIR'.
read table jtab with key obj_name = sy-lisel+1(20).
move jtab-object to wf_object.
case wf_object.
when 'SMOD'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
when 'SXSD'.
SET PARAMETER ID 'EXN' FIELD SY-LISEL+1(20).
CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
endcase.
Solution 2
1.Get the Package of the program name of the transaction.
2.Go to Transaction SE18.
3.Press F4 on the badi definition name.
4.Click the information systems button.
5.Give the Package name and press enter.
6.Select the BADI that is relevant to the application.
Good Luck and thanks
AK

Search for a unknown field

Hi friends,
Can u plz give me the tips thru which i can easily search for a field and know to which tables does that field belong to?
Suppose i want the posting date ..how to search for/
Appreciate if you can provide me any other tips that u feel useful to beginners.

Hi,
First of all when you required any field then you must first find the tcode in which it is present. We are having different modules like SD,MM, FI and so on. So you should come to know that to which module it belongs and what are the tcodes are related to it.
Then go to that respective tcode and place the cursor on that particular field and hit F1. Then go to technical information icon where you can find the table name,
program name, screen number and so on.
Reward points if useful.
Cheers,
Swamy Kunche

How to search for (new) BAdIs?

Hi,
I found some forum threads, blogs, and wikis in sdn about "How to search for BAdIs".
Here the list I found:
1. SE18 u2013 BADI Definition
2. SE81 u2013 Application Hierarchy
3. SPRO u2013 SAP IMG Reference
4. SE84 u2013 Object Navigator u2013 Repository Information System
5. SPAU_ENH (ECC6.0) u2013 Enhancements -> Simple or Composite (spots, implementations, sections, upgrades)
6. ST05 u2013 SQL Trace -> Buffer Trace
7. SE24 -> CL_EXITHANDLER -> Breakpoint at Method GET_INSTANCE -> Run Transaction -> Exit_name -> BADI name
The fastest ways are ST05 and SE24, I think. Are there such effective ways for the new, kernel based BAdIs? ST05 and CL_EXITHANDLER with debugger donu2019t work.
thanks in adavance,
Michael

Hi,
Missed one more method
The below steps should enable you to find any BADI related to any transaction in a matter of minutes.
Go to the transaction SE37 to find your function module.
Locate the function SXV_GET_CLIF_BY_NAME.
Put a breakpoint there.
Now open a new session.
Go to your transaction.
Goto the screen where you want to find any BADI available, it will stop in this function.
Double click on the function field EXIT_NAME.
That will give you name of the BADI that is provided in your transaction.
Again execute and it stop again and fill with new BADI name if any
Repeat the same step and you come to know how many BADI exist
Regards
Bala Krishna

How to search for file in jsp page

i need help on how to search for a file in a folder where there is a lot of subfolder.like how u search in a document in windows. i need a complete codes in jsp page.
thank you in advance.
Message was edited by:
n_dilah

no i need to do a search engine in jsp page which is the j2ee.
i type smth than tat file from any folder will appear the same way when u need to search your file in a document in windows.
well can u nice people tell me where i can get the codes bcos i stinks when it come to programming.
thank you very very very much.

How to search for a BADI in a transaction

Hi All,
Please let me know the steps to find a BADI for a transaction.
Thanks,
Jaffer Ali.S

check this.
u can find BADI's in different ways...
1>First go to any transaction->iN THE menu bar SYSTEM->STATUS->Get the program name ->double click->u will go to the program attached to the tcode.Now search term will be CALL CL_EXITHANDLER.Now u will get list of BADI'S available..
2>Goto SE24->Give class name as CL_EXITHANDLER->Display->double click on get_instance mathod->Now u will go inside the method->Now put break point on the cl_exithandler.Now go to any transaction code and pass dat..U will see that it will be stopped on the break point which u set on the cl_exithandler...In the exit name u can find list of badi's attached to the tcode..
There are multiple ways of searching for BADI.
Finding BADI Using CL_EXITHANDLER=>GET_INSTANCE
Finding BADI Using SQL Trace (TCODE-ST05).
Finding BADI Using Repository Information System (TCODE- SE84).
1. Go to the Transaction, for which we want to find the BADI, take the example of Transaction VD02. Click on System->Status. Double click on the program name. Once inside the program search for CL_EXITHANDLER=>GET_INSTANCE.
Make sure the radio button In main program is checked. A list of all the programs with call to the BADIs will be listed.
The export parameter EXIT_NAME for the method GET_INSTANCE of class CL_EXITHANDLER will have the user exit assigned to it. The changing parameter INSTANCE will have the interface assigned to it. Double click on the method to enter the source code.Definition of Instance would give you the Interface name.
2. Start transaction ST05 (Performance Analysis).
/people/alwin.vandeput2/blog/2006/04/13/how-to-search-for-badis-trace-it
3. Go to Maintain Transaction (TCODE- SE93).
Enter the Transaction VD02 for which you want to find BADI.
Click on the Display push buttons.
Get the Package Name. (Package VS in this case)
Go to TCode: SE84->Enhancements->Business Add-inns->Definition
Enter the Package Name and Execute.
Here you get a list of all the Enhancement BADIs for the given package MB.
The simplese way for finding BADI is
1. chooes Tcode Program & package for that Tcode.
2. Go to Tcode se18
3. Press F4
4. search by package or by program.
Regards
Kiran Sure

How To Search For a Specific File name?

Hello Everybody
How To Search For a File Like NewFile.txt in a Root Like C:\\
And If The File Is Found Open It And Write In It?

http://forum.java.sun.com/thread.jspa?threadID=5194090&messageID=9763314

How to search for a certain cross reference using its name in FM 11?

How to search for a certain cross reference using its name in FM 11?

Well, thank you. I am only using Find dialog box. By "name", I'd like to give an example. The background is FM 11 structured. I have an element "xref" which is used to make cross reference. Now In Chapter 1, there is a sentence like "This is an ODU for ...". I made a cross ref of the word "ODU" to its full name "outdoor unit" in Chapter 2 (in the same book). After this, the word "ODU" in the sentence in Chapter 1 will no longer be a plain text. So I no longer can use the find dialog box to search for "ODU" because it is already an xref rather than text. I am not if it's clear.

How to search for a particular word in a string?

How to search for a particular word in a string?
thanks for your help....

This works fine.
public class Foo {
    public static void main(String[] args) {
    String s = "Now is the time for all good...";
    String s2 = "the time";
    System.out.println(s.contains(s2));
    System.out.println(s.contains("for al"));
    System.out.println(s.contains("not here"));
}output:true
true
falseYou must have something else wrong in your code.
JJ

How to search for a particular word in a long document?

How to search for a particular word in a long document?

What program are you using to read the document?
Good luck.

How to search for a word in an email?

How to search for a particular word in an email in 'Mail'?

You can't search through email content using buil-in search
If you're using Gmail, you can use their native Google Mail app which will allow you to search through body content and server-stored emails.

How to search for password policy

Hello,
Using DS 5.2:
I've created a test policy, dn: cn=Test Policy,ou=People, o=xxx, o=isp. I can apply the policy, I can see the policy in my backup ldifs, but I can't figure out how to search for and display it (and eventually, delete it) either from the command line using ldapsearch or form within the admin gui. Any help?

What I would like to do is query my 8i instance for the current password policy
Can anyone provide a query to retrieve this info?connect as sys
in Oracle 8i and issue the command;
select object_name,object_type from all_objects where object_name like '%PASS%';
and
select object_name,object_type from all_objects where object_name like '%POLICY%';
I think , i'm not sure these policies would be transfered to 10g through migration except -if any- some of them are obsolete to 10g!!!!!
Regards,
Simon

How to search for upper/lower case using string using JAVA!!!?

-I am trying to write a program that will examine each letter in the string and count how many time the upper-case letter 'E' appears, and how many times the lower-case letter 'e' appears.
-I also have to use a JOptionPane.showMessageDialog() to tell the user how many upper and lower case e's were in the string.
-This will be repeated until the user types the word "Stop".
please help if you can
what i have so far:
[code]
public class Project0 {
public static void main(String[] args) {
String[] uppercase = {'E'};
String[] lowercase = {'e'};
String isOrIsNot, inputWord;
while (true) {
   // This line asks the user for input by popping out a single window
   // with text input
   inputWord = JOptionPane.showInputDialog(null, "Please enter a sentence");
   if ( inputWord.equals("stop") )
    System.exit(0);
   // if the inputWord is contained within uppercase or
   // lowercase return true
   if (wordIsThere(inputWord, lowercase))
    isOrIsNot = "Number of lower case e's: ";
   if (wordIsThere(inputword, uppercase))
     isOrIsNot = "number of upper case e's: ";
   // Output to a JOptionPane window whether the word is on the list or not
   JOptionPane.showMessageDialog(null, "The word " + inputWord + " " + isOrIsNot + " on the list.");
} //main
public static boolean wordIsThere(String findMe, String[] theList) {
for (int i=0; i<theList.length; ++i) {
   if (findMe.equals(theList[i])) return true;
return false;
} // wordIsThere
} // class Lab4Program1
[/code]

So what is your question? Do you get any errors? If so, post them. What doesn't work?
And crossposted: how to search for upper/lower case using string using JAVA!!!?

HT204266 how to search for a specific app eg tetris in the app store?

Hi is there anyone that can please help me on how to search for a specific app eg tetris in the app store? Thanks

Hi Friend,
You just write down the name of the app or for what the app is used for (eg, write down Notes and then will appear a lot of options), then download what you wish.
Hope it will be helpful

How to search for a qualifier field?

Similar Messages

Maybe you are looking for