How to search for an event in calendar application

Can someone provide steps to search for an event in the calendar application? I had tried using the magnifying glass option on the phone but this immediately takes me to the internet. I have tried using the edit button but there is no search options.  I tried doing this while the calendar application was open.  Any help would be greatly appreciated.

OOPS!!
I posted my question in the wrong community

Similar Messages

  • I have a iphone 5. How do I search for a event from 2013 under search? I do have "all events" selected

    I have a iphone 5. How do I search for a event from 2013 under search? I do have "all events" selected

    I would check, but I believe I have read that the calendar only lets you search back in the current year. You might find additional information about that in the User Guide. http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
    What happens if you go back to a month in 2013, do you see a date with any events in it? I'm not saying the calendar is deleting data, just that you cannot search earlier than the current year.

  • How to Set A Default Start Time For New Events In Calendar?

    How to Set A Default Start Time For New Events In Calendar?

    John,
    Thanks for that suggestion - could not get it to work. However, I did manage a different approach. I finally determined the sequence of events in terms of how the various events and listeners fire (I think).
    Basically, the CalendarActivityListener fires, followed by the listener associated with the Calendar object's Create facet, followed finally by the CalendarEventListener - the final is where the TriggerEvent is available and then finally, control is passed to the popup/dialog in the Create facet. So, my approach of trying to set/get the TriggerDate in the user's HTTP session was doomed to failure because it was being get before it had been set :(
    Anyway, I ended up adding a bit of code to the CalendarEvent listener - it grabs the current BindingContext, navigates through the DCBindingContainer to derive an Iterator for the ViewObject which drives the calendar and then grabs the currently active row. I then do a few tests to make sure we're working with a "new" row because I don't want to alter start & end dates associated with an existing calendar entry and then I define the Start and End dates to be the Trigger Date.
    Works just fine. Snippet from the listener follows
    BindingContext bindingContext = BindingContext.getCurrent();+
    *if ( bindingContext != null )    {*+
    DCBindingContainer dcBindings = (DCBindingContainer) bindingContext.getCurrentBindingsEntry();+
    DCIteratorBinding iterator = dcBindings.findIteratorBinding("EventsView1Iterator");+
    Row currentRow = iterator.getCurrentRow();+
    if ( currentRow.getAttribute("StartDate") == null)+
    currentRow.setAttribute("StartDate", calendarEvent.getTriggerDate());+
    if (currentRow.getAttribute("EndDate")==null)+
    currentRow.setAttribute("EndDate", calendarEvent.getTriggerDate());+
    *}*

  • IPhone calendar faile to search for future events more than 1 year

    Dear guys,
    I can't search for future events more than 1 year later.
    Is it a common scenario?
    Many thanks!

    Dear guys,
    I can't search for future events more than 1 year later.
    Is it a common scenario?
    Many thanks!

  • How do I enter an event in Calendar and repeat it every 3rd day

    How do I enter an event in Calendar and repeat it every 3rd day

    Hello PatrickMaryAnn,
    Thanks for the question, and welcome to Apple Support Communities.
    When editing or creating an event, choose Repeat > Custom… - then choose "Daily" and enter Every 3 days.
    Calendar: Update or delete an event
    http://support.apple.com/kb/PH11509
    Thanks,
    Matt M.

  • How to search for file in jsp page

    i need help on how to search for a file in a folder where there is a lot of subfolder.like how u search in a document in windows. i need a complete codes in jsp page.
    thank you in advance.
    Message was edited by:
    n_dilah

    no i need to do a search engine in jsp page which is the j2ee.
    i type smth than tat file from any folder will appear the same way when u need to search your file in a document in windows.
    well can u nice people tell me where i can get the codes bcos i stinks when it come to programming.
    thank you very very very much.

  • How to search for a BADI in a transaction

    Hi All,
    Please let me know the steps to find a BADI for a transaction.
    Thanks,
    Jaffer Ali.S

    check this.
    u can find BADI's in different ways...
    1>First go to any transaction->iN THE menu bar SYSTEM->STATUS->Get the program name ->double click->u will go to the program attached to the tcode.Now search term will be CALL CL_EXITHANDLER.Now u will get list of BADI'S available..
    2>Goto SE24->Give class name as CL_EXITHANDLER->Display->double click on get_instance mathod->Now u will go inside the method->Now put break point on the cl_exithandler.Now go to any transaction code and pass dat..U will see that it will be stopped on the break point which u set on the cl_exithandler...In the exit name u can find list of badi's attached to the tcode..
    There are multiple ways of searching for BADI.
    • Finding BADI Using CL_EXITHANDLER=>GET_INSTANCE
    • Finding BADI Using SQL Trace (TCODE-ST05).
    • Finding BADI Using Repository Information System (TCODE- SE84).
    1. Go to the Transaction, for which we want to find the BADI, take the example of Transaction VD02. Click on System->Status. Double click on the program name. Once inside the program search for ‘CL_EXITHANDLER=>GET_INSTANCE’.
    Make sure the radio button “In main program” is checked. A list of all the programs with call to the BADI’s will be listed.
    The export parameter ‘EXIT_NAME’ for the method GET_INSTANCE of class CL_EXITHANDLER will have the user exit assigned to it. The changing parameter ‘INSTANCE’ will have the interface assigned to it. Double click on the method to enter the source code.Definition of Instance would give you the Interface name.
    2. Start transaction ST05 (Performance Analysis).
    /people/alwin.vandeput2/blog/2006/04/13/how-to-search-for-badis-trace-it
    3. Go to “Maintain Transaction” (TCODE- SE93).
    Enter the Transaction VD02 for which you want to find BADI.
    Click on the Display push buttons.
    Get the Package Name. (Package VS in this case)
    Go to TCode: SE84->Enhancements->Business Add-inns->Definition
    Enter the Package Name and Execute.
    Here you get a list of all the Enhancement BADI’s for the given package MB.
    The simplese way for finding BADI is
    1. chooes Tcode Program & package for that Tcode.
    2. Go to Tcode se18
    3. Press F4
    4. search by package or by program.
    Regards
    Kiran Sure

  • How To Search For a Specific File name?

    Hello Everybody
    How To Search For a File Like NewFile.txt in a Root Like C:\\
    And If The File Is Found Open It And Write In It?

    http://forum.java.sun.com/thread.jspa?threadID=5194090&messageID=9763314

  • How to search for a fields ?

    Hello,
    I know it's an easy question but I've not find, how to search for a fields in Database on CR XI R2 ?
    Thanks in advance

    Hi Alexandre
    Do you want to see which database fields you have inserted in Crystal Reports and in which section you have inserted what fields?
    If yes then
    -open formula editor
    -In the right side pane expand Formatting Formulas.
    -Expand all the sections one by one and it will show you database fields,formulas and all the objects used in the sections.
    Hope this will clarify your doubts.
    Regards
    Asha.

  • How to search for a certain cross reference using its name in FM 11?

    How to search for a certain cross reference using its name in FM 11?

    Well, thank you. I am only using Find dialog box. By "name", I'd like to give an example. The background is FM 11 structured. I have an element "xref" which is used to make cross reference. Now In Chapter 1, there is a sentence like "This is an ODU for ...". I made a cross ref of the word "ODU" to its full name "outdoor unit" in Chapter 2 (in the same book). After this, the word "ODU" in the sentence in Chapter 1 will no longer be a plain text. So I no longer can use the find dialog box to search for "ODU" because it is already an xref rather than text. I am not if it's clear.

  • How to search for a badi

    how to search for a badi
    srinivas.

    Hi Srinivas,
    Good
    Check this link
    /people/alwin.vandeput2/blog/2006/04/13/how-to-search-for-badis-trace-it
    Run this program
    *& Report ZNEGI16 *
    REPORT ZNEGI16 .
    TABLES : TSTC,
    TADIR,
    MODSAPT,
    MODACT,
    TRDIR,
    TFDIR,
    ENLFDIR,
    SXS_ATTRT ,
    TSTCT.
    DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
    DATA : FIELD1(30).
    DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.
    PARAMETERS : P_TCODE LIKE TSTC-TCODE,
    P_PGMNA LIKE TSTC-PGMNA .
    DATA wa_tadir type tadir.
    START-OF-SELECTION.
    IF NOT P_TCODE IS INITIAL.
    SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
    ELSEIF NOT P_PGMNA IS INITIAL.
    TSTC-PGMNA = P_PGMNA.
    ENDIF.
    IF SY-SUBRC EQ 0.
    SELECT SINGLE * FROM TADIR
    WHERE PGMID = 'R3TR'
    AND OBJECT = 'PROG'
    AND OBJ_NAME = TSTC-PGMNA.
    MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
    IF SY-SUBRC NE 0.
    SELECT SINGLE * FROM TRDIR
    WHERE NAME = TSTC-PGMNA.
    IF TRDIR-SUBC EQ 'F'.
    SELECT SINGLE * FROM TFDIR
    WHERE PNAME = TSTC-PGMNA.
    SELECT SINGLE * FROM ENLFDIR
    WHERE FUNCNAME = TFDIR-FUNCNAME.
    SELECT SINGLE * FROM TADIR
    WHERE PGMID = 'R3TR'
    AND OBJECT = 'FUGR'
    AND OBJ_NAME EQ ENLFDIR-AREA.
    MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
    ENDIF.
    ENDIF.
    SELECT * FROM TADIR INTO TABLE JTAB
    WHERE PGMID = 'R3TR'
    AND OBJECT in ('SMOD', 'SXSD')
    AND DEVCLASS = V_DEVCLASS.
    SELECT SINGLE * FROM TSTCT
    WHERE SPRSL EQ SY-LANGU
    AND TCODE EQ P_TCODE.
    FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
    WRITE:/(19) 'Transaction Code - ',
    20(20) P_TCODE,
    45(50) TSTCT-TTEXT.
    SKIP.
    IF NOT JTAB[] IS INITIAL.
    WRITE:/(105) SY-ULINE.
    FORMAT COLOR COL_HEADING INTENSIFIED ON.
    Sorting the internal Table
    sort jtab by OBJECT.
    data : wf_txt(60) type c,
    wf_smod type i ,
    wf_badi type i ,
    wf_object2(30) type C.
    clear : wf_smod, wf_badi , wf_object2.
    Get the total SMOD.
    LOOP AT JTAB into wa_tadir.
    at first.
    FORMAT COLOR COL_HEADING INTENSIFIED ON.
    WRITE:/1 SY-VLINE,
    2 'Enhancement/ Business Add-in',
    41 SY-VLINE ,
    42 'Description',
    105 SY-VLINE.
    WRITE:/(105) SY-ULINE.
    endat.
    clear wf_txt.
    at new object.
    if wa_tadir-object = 'SMOD'.
    wf_object2 = 'Enhancement' .
    elseif wa_tadir-object = 'SXSD'.
    wf_object2 = ' Business Add-in'.
    endif.
    FORMAT COLOR COL_GROUP INTENSIFIED ON.
    WRITE:/1 SY-VLINE,
    2 wf_object2,
    105 SY-VLINE.
    endat.
    case wa_tadir-object.
    when 'SMOD'.
    wf_smod = wf_smod + 1.
    SELECT SINGLE MODTEXT into wf_txt
    FROM MODSAPT
    WHERE SPRSL = SY-LANGU
    AND NAME = wa_tadir-OBJ_NAME.
    FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
    when 'SXSD'.
    For BADis
    wf_badi = wf_badi + 1 .
    select single TEXT into wf_txt
    from SXS_ATTRT
    where sprsl = sy-langu
    and EXIT_NAME = wa_tadir-OBJ_NAME.
    FORMAT COLOR COL_NORMAL INTENSIFIED ON.
    endcase.
    WRITE:/1 SY-VLINE,
    2 wa_tadir-OBJ_NAME hotspot on,
    41 SY-VLINE ,
    42 wf_txt,
    105 SY-VLINE.
    AT END OF object.
    write : /(105) sy-ULINE.
    ENDAT.
    ENDLOOP.
    WRITE:/(105) SY-ULINE.
    SKIP.
    FORMAT COLOR COL_TOTAL INTENSIFIED ON.
    WRITE:/ 'No.of Exits:' , wf_smod.
    WRITE:/ 'No.of BADis:' , wf_badi.
    ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(105) 'No userexits or BADis exist'.
    ENDIF.
    ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(105) 'Transaction does not exist'.
    ENDIF.
    AT LINE-SELECTION.
    data : wf_object type tadir-object.
    clear wf_object.
    GET CURSOR FIELD FIELD1.
    CHECK FIELD1(8) EQ 'WA_TADIR'.
    read table jtab with key obj_name = sy-lisel+1(20).
    move jtab-object to wf_object.
    case wf_object.
    when 'SMOD'.
    SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
    CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
    when 'SXSD'.
    SET PARAMETER ID 'EXN' FIELD SY-LISEL+1(20).
    CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
    endcase.
    Solution 2
    1.Get the Package of the program name of the transaction.
    2.Go to Transaction SE18.
    3.Press F4 on the badi definition name.
    4.Click the information systems button.
    5.Give the Package name and press enter.
    6.Select the BADI that is relevant to the application.
    Good Luck and thanks
    AK

  • How to search for a particular word in a string?

    How to search for a particular word in a string?
    thanks for your help....

    This works fine.
    public class Foo {
        public static void main(String[] args) {
        String s = "Now is the time for all good...";
        String s2 = "the time";
        System.out.println(s.contains(s2));
        System.out.println(s.contains("for al"));
        System.out.println(s.contains("not here"));
    }output:true
    true
    falseYou must have something else wrong in your code.
    JJ

  • How to search for a particular word in a long document?

    How to search for a particular word in a long document?

    What program are you using to read the document?
    Good luck.

  • How to search for a word in an email?

    How to search for a particular word in an email in 'Mail'?

    You can't search through email content using buil-in search
    If you're using Gmail, you can use their native Google Mail app which will allow you to search through body content and server-stored emails.

  • How to search for password policy

    Hello,
    Using DS 5.2:
    I've created a test policy, dn: cn=Test Policy,ou=People, o=xxx, o=isp. I can apply the policy, I can see the policy in my backup ldifs, but I can't figure out how to search for and display it (and eventually, delete it) either from the command line using ldapsearch or form within the admin gui. Any help?

    What I would like to do is query my 8i instance for the current password policy
    Can anyone provide a query to retrieve this info?connect as sys
    in Oracle 8i and issue the command;
    select object_name,object_type from all_objects where object_name like '%PASS%';
    and
    select object_name,object_type from all_objects where object_name like '%POLICY%';
    I think , i'm not sure these policies would be transfered to 10g through migration except -if any- some of them are obsolete to 10g!!!!!
    Regards,
    Simon

Maybe you are looking for

  • How to set F4 help for an inputfiled of BSP page?

    hi friends, I have to set F4 help for a Field in my BSP page. for this i am doing like this. Oninitialization Event.... tables : t001p ,pa0001 ,t554t. data : begin of it,         awart like t554t-awart,         atext like t554t-atext,        end of i

  • IPad - after software upgrade the APN settings keep resetting by themselves. There are multilple accounts of this happening. Please help.

    Hello, I have a problem with an iPad 2. After the software upgrade to iOS 5 the APN settings keep resetting all by themselves (I set the APN, I get out of the setting by pressing the back arrow on the top left of the screen, I get back in there and t

  • How to split video into chunks for web?

    Hi all, I have a movie trailer that needs to be split into chunks for the web, to be played as a flash file, I have never done this, so my question is at what level do i do this, the timeline?, is there a program that does it?, can flash do it automa

  • ORA-01017: OS Authentication on Red Hat Linux 6.2 and Oracle 11gR2

    Hello I am trying to eanble OS Authentication on Oracle 11.2.0.3 installed on a Red Hat Linux Server 6.2 and it just does not work. When I try to login I always get the error ORA-01017: invalid username/password; logon denied I have set the following

  • Help with proxy settin

    when i try to sync my songs with windows media player it says error: WMP can't access this file the file might be in use, you might not have access to this file or your proxy settings might not be correct. and the same for when I used zenvision m sof