How to search for Key Figures in Query Designer 7.0?

Hi,
in BEx Query Designer 3.5 there was a search function to look after key figures or characteristics. Is there a search function in Query Designer 7.0?
Thanks.

Hi,
QD 3.x version has "Find" option to identify the KF and Characteristics,but the same is not available with QD 7.x.
Reason could be:
With QD 7.x,just by typing the starting letters of KF or Characteristics by Keyboard itself,it will highlight you the entries.Hence there is no explicit Find option provided.But in case of QD 3.x,they gave it explicitely.
Rgds,
Murali

Similar Messages

How to copy restricted key figures in query designer ?

hi,
i have created a query in query designer (BI 7.0).
How can i copy existing restricted key figures ? i can't find anything. i always have to create a new one, and then i have to do all the things like 'details of selection' etc.... manually. that CANNOT be, there MUST be a way to copy those key figures.
any ideas ?
best regards, Martin

Hi Martin,
Restricted key figures can be stored on the infoprovider basis . For which right click on the key figure (left hand side pane ), Select the necessary key figure and assign the restriction through characteristics combination, and give it a restriction and save it . Next tiem when you create query on the same info provider it should appear in the left hand side as readymade reusable piece .
Hope that helps.
Regards
Mr Kapadia

How to search in BI 7.1 query designer for the required key figures & chars

Hi All,
Can anyone plz tell me how to search in BI 7.1 query designer for the required key figures & characteristics. I have the query being built on a multiprovider which has many cubes.
So, i have a huge list of key figures and characteristics. I am not able to search for the required one by the name or the technical name.
How can we search and pick the required object from the enormous list of the Mutliprovider in the Bex Query Designer??
Thanks
Phani

There is not a search feature available. You have to do an educated guess under what dimension your infoobject could be and select.

Sort data by key figure in Query Designer

Hi Gurus,
Is it possible to sort a query according to a key figure from Query designer?
Thanks

Using condition TOP N is the solution

Currency translation for a restricted key figure in Query designer

Dear Experts,
In my query i am using a restricted Keyfigure (ZRKF1 which is reusable). I have to change the currency translation key of the restricted Key Figure from zcur1 to zcur2. I am not able to edit zrkf1 Currency translation in the properties( It is in gray colour) ,while i can do it for a normal keyfigure. if i edit zrkf1 then other queries will be affected. How should i solve this? Can i copy and paste the zrkf1 to zrkf2 in order to use zrkf2 with currency translation zcur2 in my query ? How can i coy and paste restricted key figure?
Thanks,
Riya

Hello Riya
I think you can't change the currency transaltion type for RKF... to change it in RKF just make the changes in the KF which you have used in RKF....
If you don't want to change the CURR translation type in KF1 than copy it paste it (KF2)and change in that KF2...now u can use KF2 in restricted KF...
Thanks
Tripple k

How to fill a Key figure at Query run time

Hi All,
I have a requirement where I have to fill a key figure while the query is running. This value is obtained by multiplying 2 attributes of a Material Master Data object.I could have used Formula Variable but there are two problems -
1. I have material in my info provider but not this Material Master Data object.
2. For a particular material, there are multiple rows in the Master Data object. And I have to pick only one row by applying some condition on a field of the MD object.
Please let me know if there is some way to implement this.

Hello,
You can obtain this using virtual KF. Create a KF and include in the cube on which report is built. Dont have any mapping/rule for the same.
Now write ur code using SMOD and populate this KF during runtime.
Regds,
Shashank

Restricted Key Figure in Query Designer

Hi,
I have defined a Input-Variable on the Characteristic 0PURCH_ORG (Purchasing Org.) in the Query Designer.
This Variable is Mandator and represents "Selection Option". Means, the user has to give the Input-Varaible for ex. 0010...0011.
Now my requirement is to define a restriced key figure where these Purchasing Org. from Input-Variable must exclude
in the restriced key figure. I cannot exclude the Input-Varaible in restriced Key Figure as it represents "Selection Option".
I tried to define a Customer-Exit Variable (Selection Option) on the Characteristic 0PURCH_ORG which should exclude the Input-Variable.
But the ABAP-Code for Customer-Exit Variable doesn't work.
Any clue, how I can solve this problem?
Thanks

Hi Moha Nan,
A variable of the type selection option can not be excluded therefore a variable exit is your only option. What is the current ABAP you have written and why doesn't it work? Maybe we can find the issue with the coding.
You need one variable of the type selection option and another one to read the first variable and reverse the option sign (from include to exclude).
Regards,
Alex.

Calculated Key Figures in Query Designer - translation

Hello Experts,
I created a few Caclulated Key Figure in the Query Designer. They have a GUID and a text description.
I would like to know:
1) How these CKF are represented in ABAP on the system and where I can find them - some database table ?
2) If I want the description to be available in many languages how can I handle this ?
Thanks a lot
Rado

Check this
Tables analysed by analyze_rsz_tables
Khaja

Creating a resticted Key Figure in Query Designer (3.5)

Hello, hope your all well!
I'm trying to create a restricted key figure that's related to the publication date of one of our titles.
I've tried to create a Structure that shows one text result if the publication date is the same or greater than 01.01.2008 and another if it's less. However, in my results it seems to be bringing two results for each line, one with each text result.
Could anyone point my in the right direction?
Have a fantastic weekend,
Rhys

Sorry, I'm new at this; what do you mean by inputs?
I'm trying to create something in the query designer that displays one text result if the result is lower than a certain number and another if higher,
Hope that makes sense.
Take care!
Rhys

Aggregation ---Settings of KF(Key Figure) in Query Designer

Hi,
What is the impact of the following setting in the query result
Query Designer>KF Definition>Edit-->Aggregation (TAB)
Exception Aggregation-->MAximum and
Ref Characterstic
Thanks

Hi,
To enable the calculation of key figures, the data from the InfoProvider has to be aggregated to the detail level of the query and formulas may also need to be calculated. The system has to aggregate using multiple characteristics. In regard to a selected characteristic, the system can aggregate with another rule for each key figure (exception aggregation).
http://help.sap.com/saphelp_nw04s/helpdata/en/75/21054da1392649948e5b94e4fc4bce/frameset.htm
Exception aggregation ?
http://help.sap.com/saphelp_nw04s/helpdata/en/43/53717c223a1bcde10000000a1553f7/content.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/47/4d6d902dbb22c5e10000000a42189d/content.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/47/5dfdca3ea9427fe10000000a42189d/content.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/d2/e0173f5ff48443e10000000a114084/frameset.htm
Rgs,
I.R.K

How to restrict for same char in Query designer

Hi Experts,
We have a requirement where we have to display the TRansfer amount
Where transfer from contract and transfer to contract
Sould not be equal.
Is there any way by which in query designer we can put condition on Chars.
Please suggest.
Thanks
Mayank

Hi,
As much I understood, you may create a replacement path variable on CHAR and convert the same in number/Key Figure.
You may put condition on this.
I hope it will help.
Thanks,
S

Error in total of Key figure in query designing

Dear Friends,
I am new at query designing & am stuck in a problem.
I have a CKF named Load in the column.
When I select District & Complaint No.in rows the result is some 100 rows and upon exporting the result in excel & summing up load the total comes out to be right..............................
BUT in web browser when i choose only District in the row and the result is a single row the sum of load displayed is incorrect.............wht cn b the possible reason of this??
Thnx in advance.

Hi Dear, i asume every districwise total also calculated. pls check onemoretime.
Regards
Amulu

Dynamic Texts from Bex ( for Key Figures ) not coming to WEBI Query

Hi Gurus,
We have a Query in BEx : Each Key figure column text changes dynamically - Like based on Present month
it will Display Month +1 Month +2 up to Month +12. Used dynamic Text variables .
But when i created the universe and Webi report , i am missing the text in the column for Key figures .
How should i get the column text in Webi which is same as in Bex : Points will be awarded for helpful
answers.
Thanks
Magge

Hi,
text variables with replacement path are supported in BO4.0, see following document: SAP BusinessObjects BI4 - Supported BEx Query Elements
As an example after entering 2012 in the prompts window, the name of the corresponding key figure will dynamically change:
After refreshing and selecting 2013, the column name will update:
Im not sure though if this is the case with unv universe access to BEx queries.
Best regards,
Victor

How to write conversion routine for key figure?

Our customer has this requirment:
we need to know the last time of some TV program in BEx report, If a TV program last 500 seconds, we need show the key figure like this: 00:08:20, If a TV program last 100000 seconds, we need show the key figure like 27:46:40 (27 hours and 46 minitues and 27 seconds), If we define a key figure as time, BW system will report a error that say it is not acceptable time. If we want to define a integer, but we need display it like hhmmss format. We know we can write conversion routine for char. but I don't how to write conversion routine for key figure.   Please give me any hint if any other solutions?
Edited by: SY DONG on Dec 2, 2010 3:36 AM

If you want to do in Transformation Layer :
You can use routine ...break up the seconds into minute hour and seconds
you will have to handle few cases in this:
let say your variable lv_seconds holds the number of seconds you want to convert to hour min and seconds
DATA: lv_seconds type i,
           lv_hrs type i,
          lv_sec type i,
          lv_min type i.
lv_hrs = lv_seconds / 3600
if lv_hrs >= 1.
lv_min = (lv_hrs - trunc(lv_hrs))*60
here again handle seconds if min >60.
else.
lv_hrs = '00'.
lv_min = lv_hrs*60
It is just hint ..how you can manipulate the seconds to get it...you will have to think about the complete algorithm
Regards,
RK

How to identify which key figure will the numeric pointer for deltas?

Hi All,
I have created a numeric pointer for generic extraction ? but how to identify which key figure will the numeric pointer will use for deltas ?
how to identify the key figures which is suitable for numeric pointer. And the generic extraction is based upon the copa table?
Can anyone suggest me how the numeric pointer works and how to identify deltas are carried out at numeric pointer?
Thanks
Pooja

Pooja,
If you are using a generic extractor which is based on COPA table, then numeric pointer may not be the suggested delta extraction mechanism.
A time stamp would be the better one to use. In a time stamp, you can give a lower limit value of 300 seconds.. so that it will try to fetch the missed records.
Moreover, a delta would be based on a character, preferably a time char.
In your requirement, try to figure out the character on whichdeltas will be based.
Sasi

How to search for Key Figures in Query Designer 7.0?

Similar Messages

Maybe you are looking for