How to search for Premiere Pro Help, tutorials, and so on

Use a custom-made search engine when searching for Premiere Pro information.
I'm always accepting input for how to make the custom search better.

Maybe this thread (or similar) should be a "sticky" ?
PS! I haven't looked "all over the place" so maybe it is in some kind of way??, at least I hope so...
Dag

Similar Messages

How to work with Premiere Pro cs5.5 and After Effects cs5 together?

I have edited my movie in premiere pro cs5.5 and made the rough cut. In premiere, i have edited the video, put in soundtrack and foley. Now, i need to add muzzle flashes & blood splatters in some scenes and final color correction using After Effects cs5.
When i import the premiere project in AE and make the changes, and then i export it back as premiere project. When i open this prmiere project, it shows vaious kind of errors and no changes are retained that i did in AE. Also, when i import the premiere project (which has 4 different sequences) in AE, all the media that has been imported in the premiere project also opens in AE making it difficult to organize the media.
How should i work now so that i add vfx and color correction using AE cs5?
I thought of exporting the video from Premiere pro and then open the video in AE and add vfx to some scenes and color correction to the full video and render it out again. But, this is the first time i am using AE and i am not sure if this is the best way. PLEASE HELP.
Or, i could import the whole project in AE, add vfx, do color correction AND then export to video from AE. But i think, it will be better if i export the video from Premiere as it has loads of options to choose from while exporting to a movie.
The dynamic link does not work between Premiere Pro Cs5.5 and After Effects cs5. Even if it does, its not working on my pc.
All the footage is in HD and i want the final result in best quality HD too. PLEASE Help!

If you are working between After Effects and Premiere Pro but with versions that are not the same number, you need to just work with movies rendered and exported as intermediate, lossless files.
Dynamic Link only works between After Effects and Premiere Pro of the same version number, and only when they are installed as part of the same suite.

How to search for data on the web and return to jsp

I need to collect data from a web site and return that data to my jsp file. The page should consist of a web page in which the user search for available flights then I conect to easyjet automatically fill in the form and return the result from easyjet.com to my jsp file..Do anyone know how can I do this?? I need to use java for this and not cgi..I found also some JavaScripts that can perform the same thing..Thanks...

Hi,
are you able to change dynamically the operation.url = "assets/data/shopping.xml";?
i need to do that based on the users input.
Thanks in advance,

Adobe Premiere Pro Help | Transferring and importing files

This question was posted in response to the following article: http://helpx.adobe.com/premiere-pro/using/transferring-importing-files.html

bonjour,
je possède une caméra "XDCAM EX1" et je travaille avec Adobe Première Pro 64bits et After Effects 64bits.
depuis que je suis passée de la CS5 à la CS6 les fichiers issue de ma caméra ne sont plus acceptés même avec "clip browser".
avez-vous une solution pour monter ces images?
cordialement

How to search for standard reports in sd and mm

Hi All ,
Wish yoy Happy Pongal ,
Pls provide me the information regarding how to see the standard reports for sd and mm in abap ,its urgent pls
thanku all bye ...

Hi,
The std programs are mention in these PDFs
SD
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CAARCSD/CAARCSD.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MYSAP/SR_SD.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMSD/BCBMTWFMSD.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOLISPLN/LOLISPLN.pdf
MM
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CAARCSD/CAARCSD.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSMAT/PSMAT.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CAARCMM/CAARCMM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MYSAP/SR_MM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MYSAP/SR_MM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMMM/BCBMTWFMMM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MYSAP/SR_MM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MMWMLVS/MMWMLVS.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MMISVE/MMISVE.pdf
Rgds,
Prakash

How to restore original Premiere Pro CC interface and how to drag video to timeline panel?

The trial version I downloaded does not have the video and audio tracks on the timeline panel. I tried playing around to find them but this is what happened instead.
May I know how to restore the original interface?
Also, how do I drag videos to the timeline panel when it does not have any audio or video track line that I can work with, unlike the CS6 version I was using?
Thank you.

Hi Erica,
To restore:
From the menu items choose Window > Workspace> Reset Workspace
To add video to the Timeline:
Select File > New > Sequence and create a sequence. Drag video to new sequence.
or
In the Project panel, drag your video to the New Item . This will create a sequence that best matches your clips properties.
Best,
Peter Garaway
Adobe
Premiere Pro

Running an update for Premiere Pro CC (2014) and the update has frozen at 42%

What do I need to do to get the update to resume? Or do I need to reinstall the update completely?

This is an open forum, not Adobe support... you may get better help from Adobe staff
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"

FAQ: How do I learn Premiere Pro?

If you're new to video editing, a good place to get started learning Premiere Pro is this article, which collects an ordered and curated set of high-quality materials from various sources:
Getting started with Adobe Premiere Pro
If you're an experienced video editor who is just beginning to learn Premiere Pro, this article is a good place to start:
resources for editors familiar with Final Cut Pro or Avid Media Composer
Here are recommended resources for learning more about Adobe Premiere Pro:
Premiere Pro Help documents and Help & Support pages in several languages
Community Help search for Premiere Pro
An Editor's Guide to Adobe Premiere Pro
Getting started with Premiere Pro CS5.5, by video2brain
Getting started with Premiere Pro CS6, by video2brain
Premiere Pro CS6: Learn By Video, by video2brain
Premiere Pro CS5: Learn By Video by video2brain
video tutorials on Adobe TV and Video Workshop
Premiere Pro CS5 Classroom in a Book
Premiere Pro team blog
Premiere Pro team Facebook page and Twitter feed
Best of Premiere Pro by Eran Stern
Jarle Leirpoll's PremierePro.net

Summertime1234 please see Launch CC apps after install - https://helpx.adobe.com/creative-cloud/help/launch-creative-cloud-apps.html for information on how to open Premiere Pro. You can also find more information about installing the Adobe Creative applications at Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html.

Packing and publishing C++ Plugins for Premiere Pro CC

Hi,
I'm not sure if this is the correct sub for this issue, but it looks like the best starting point for now. Please redirect me if there is a sub better suited for my case.
I'm developing C++ based (After Effects/Premiere Pro SDK) plugins for Premiere Pro CC and I'd like to publish those to be accessible via Adobe Exchange and therefore installable via the Extension Manager.
I know that the plugins need to be packaged as .ZXP and that all files need to be defined in a .MXI file with a corresponding target path.
Sadly every documentation and sample I found didn't contain examples or further details on how to that for Premiere Pro plugins.
One documentation contained product specific tokens that can be used in the .MXI, but Premiere Pro or After Effects weren't listed at all.
Is it even possible to correctly publish and install those plugins via the Extension Manager?
What about other prerequisites like C++ redistributables? Is it possible to install those together with the plugins?
Or what if there are routines that need to be run during installation or deinstallation, like activating and deactivating the plugin online?
And what is the most up-to-date place to go for information, documentation and samples relevant for CC extensions, plugins etc.? (The amount of seemingly outdated documents, examples and websites is slightly confusing.)
Regards,
Philipp

From my working manifest.xml and you need the blacklist,file to prevent After Effects from giving errors from trying to load your Premiere plug-in.
The <update url is optional.
<products>
<product minversion="7" name="Premiere" primary="true" version="7" maxversion="8.99"/>
</products>
<update url="http://www.xxx.com/MyProduct/FAQ/MyProductPR4.mxp"/>
<files>
<file source="MyProduct/.prm" destination="$applicationsupport64\Adobe\Common\Plug-ins\7.0\MediaCore" products="Premiere" platform="win"/>
<file source="MyProduct/.prm" destination="$applicationsupport64\Adobe\Common\Plug-ins\8.0\MediaCore" products="Premiere" platform="win"/>
<file source="PC/Blacklist After Effects.txt" destination="$applicationsupport64\Adobe\Common\Plug-ins\7.0\MediaCore" platform="win"/>
<file source="PC/Blacklist After Effects.txt" destination="$applicationsupport64\Adobe\Common\Plug-ins\8.0\MediaCore" platform="win"/>

Hi i was told to come to the support with the error number 16.... for some reason my premiere pro stopped working and i am still paying for i but i had to reinstall it, which i dont know how to do though

hi i was told to come to the support with the error number 16. for some reason my premiere pro stopped working and i am still paying for i but i had to reinstall it, which i dont know how to do though

Hi Omid,
Please refer to the help document below to fix the error 16:
Configuration error 16 | CC, CS
If the issue persists, please contact the support:
Contact Customer Care
Regards,
Sheena

How to download Adobe Premiere pro CS5 for windows to my new imac 27 inch

How to download Adobe Premiere pro CS5 for windows to my new imac 27 inch

IMHO Windows would be the place to start.
Why do you want to load CS5 for Windows?
Adobe does produce a version of CS5 that runs on OS X so that it would not be necessary for you to have to screw around with Windows. Personally that would be the way to go and avoid the hassles of Windows.
Allan

How to obtain Video and Non Video Serial Keys for Premiere Pro CS6

Discovered that certain codec presets (specifically the AVCHD codec) was not available for Premiere Pro CS6 installed under Creative Cloud for Enterprise.
Understand there are two different serial numbers for use in installation. One of these serial numbers is labeled "Video," and one is labeled "Non-Video.
Where are these serial numbers located? How are the serial numbers obtained?

Hello Ann,
Appreciate your reply..
Here is where some additional confusion arises (reference bottom part referring to Video Serial Keys) Adobe support said that these Video Keys are to be purchased from the reseller (which makes no sense)
Error "...a sequence that could not be opened"
So, if I understand from your replies and what I have read - it is of the belief that by de-activating and re-activating will address the issue of the missing codecs. Do you believe this to be correct as well?
Thank you

Graphics card HELP for premiere pro CC

So I've spent hours reading numerous forums in regards to what graphics card is best suitable for premiere pro cc that isn't overly priced (I.e. Quadro k4000 and 5000) I'm trying to stick in the 400-500 range for the PC I'm in the process of building. I need to know anyone's recommendations for a GOOD graphics card that isn't so expensive? I know they exist, I'm just not sure which fits best for premiere pro CC as well as the rest of adobe CC. I mean I hear people mentioning AMD vs quadro and GTX 680, etc. I know there's a list of approved cards from adobe, but that isn't what I'm looking for. I want one that will give excellent performance without emptying my wallet costing so much. Please, any suggestions are greatly appreciated, thanks guys!
-Andy

Actually, I tend to agree with cc. That i7-4770 cannot be overclocked at all - not even in a limited manner (outside of the normal turbo boosting) - to start with (the maximum multiplier on the Haswell i7 CPUs is permanently locked to its nominal stock setting or its maximum stock turbo setting, depending on how the motherboard BIOS reads the settings). Second, that i7 has only four physical cores (albeit with hyperthreading). Third, no single non-RAID 7200 RPM hard disk has a sustainable maximum transfer speed above 190 MB/s even on the outer tracks (where the transfer speed is typically highest). As a matter of fact, I tested my auxiliary PC that's equipped with an i5-2400 and 16GB of RAM, and tested it with both older-generation GPUs (a GTX 560 non-Ti and a GTX 560 Ti 448-core), and while the GTX 560 Ti 448-core did perform about 50 percent faster than the plain GTX 560 (39 seconds versus 59 seconds - or put it in converse, the GTX 560 performed one-third slower than the GTX 560 Ti 448) in the MPEG-2 DVD test of the PPBM6 suite, the real-world improvement does not come anywhere close to the benchmarked difference (with either GPU, the i5 system took between an hour and an hour and a half to convert 40 minutes of HD material to MPEG-2 DVD using the VBR 2-pass method). This means that with such longer material, the CPU and memory performance comes more into play.
Oh, did I forget to mention that Western Digital and its HGST subsidiary are the only brands that offer a consumer-level (desktop, as opposed to enterprise) 4TB hard drive that spins at 7200 RPM? (Seagate's 4TB hard drive spins at only 5900 RPM while Toshiba does not currently offer a consumer-level 4TB hard drive.) Outside of WD and HGST, you'll have to buy a much more expensive enterprise-level drive to even find a 4TB drive that spins at 7200 RPM.
And unfortunately, at current street prices, the lower-end GT/GTX 6xx series GPUs are just too expensive for their performance. In fact, the GTX 650 Ti Boost and the GTX 660 are both priced too close to that of a GTX 760 for their own good right now (unless you go for a card that's equipped with the less desirable 1GB VRAM configuration based on either of those GPUs).

Re: Adobe Premiere Pro Help | Trimming clips (CS6)

How do we access just the P Pro CS6 Help Reference instead of all this community content?

Regarding changes to Help, please read this document first: http://helpx.adobe.com/x-productkb/global/community-help.html
[Jeff Sengstack]
How do we access just the P Pro CS6 Help Reference instead of all this community content? When will Help arrive?
Jeff, this is the Help reference. It arrived the moment we shipped CS6. There is tons of new writing here for the CS6 trimming features here on this page. The documentation covers all the new features. I also have some tutorials plugged in. What is your specific complaint about the page for trimming in CS6? If there is a problem with the content being incorrect, or missing info, I can fix it. I cannot fix the way that the new Help system is designed, however, I can provide feedback to my superiors.
Also, we've been plugging in supporting community content into Help along with reference content for quite some time so that should be no surprise. We hope it is a help, rather than a hindrance. These articles and tutorials are from authors I worked with during prerelease, so tutorials are vetted, and the content is valid.
[Jim Simon]
Can't yet.
You can access the entire Help system for Premiere Pro here: http://helpx.adobe.com/premiere-pro/topics.html or just press F1. This page (called the "Topics Page"), although different in appearance, has very similar chapter topics that were found in the CS5/CS5.5 Help table of contents.
The only thing you cannot yet do is download the entire Help system as a PDF. That feature is coming next month: http://helpx.adobe.com/content/help/en/x-productkb/global/cs6-help-pdf-available-june.html
[shooternz]
I am kind of staggered that Adobe launched and released without Help Files for these CS6 products. Particularly in the case of SpeedGrade where I needed most Help. New and unfamiliar applications need Help Files for Users to get up to speed! Adobe are now relying on the cool Tutorial Videos (which have great value) but are hopeless in terms of such basics as "Setting Up" and trouble shooting. "RTFM"...What FM? I have put SpeedGrade on the backburner because of this. (I simply can not resolve some set up issues due to lack of available goto info.) May not get back to it for sometime actually.
That's not true, shooternz. Help files are available for every Adobe product. Just press F1. For Premiere Pro, the list of topics (table of contents) is here: http://helpx.adobe.com/premiere-pro/topics.html Keep in mind that this is a brand new Help system, and it took extra effort to complete the content and make sure that the system functioned properly. If there are any problems with the system, please let me know. For example, search needs to be improved and that is something we know about and are working on.
SpeedGrade Help is sparse because we just got the product 6 months ago. Given our time constraints, there simply was not enough time to develop a full Help system. On behalf of Adobe, I apologize for not being able to provide full documentation for SpeedGrade. I assure you, though, that a full set of Help documentation for SpeedGrade will be available later this year. In the mean time, if you have questions about SpeedGrade, check out the user-to-user forum here: http://forums.adobe.com/community/speedgrade
[Jeff Sengstack]
The issue is not how to access Help (pressing F1), it's how to access the old Help reference. The new Help system is community-oriented and does not include access to the old Help reference file.
Do you mean you want the CS5/CS5.5 Help without the CS6 content? It's available here on PDF: http://helpx.adobe.com/premiere-pro/archive.html
The "new community-oriented" Help is not new. We've been adding community content along with the reference content for some time now. If you mean to say the Help is only created by the community, that is totally incorrect. I am the writer for Premiere Pro, I include all the details of the new features, and I cull content to support the writing.
If one noodles around in community help, one will find bits and pieces of the old Help reference but no single source.
The previous Help content is included verbatim into current Help. It just has CS6 content added to it. It also "looks different" and is more search based. Again, search the PDF if you need to see the CS5/CS5.5 Help without CS6 content.
That is unfortunate, because Community Help is a cobbled-together, clumsy means to find solutions. Wheras, when using the old Help reference, it was a lot easier to quickly track down answers to basic questions.
I would really like to pinpoint what you are missing from CS5/CS5.5 Help. Why is it harder now to find what you need? The main differences I see is that there are no "next page" buttons, or hierarchy links. Is this what is bothering you? By the way, you can return to the topics page by clicking "Adobe Premere Pro Help" in the upper left of the page.
[Wodehouse]
I thought something had gone wrong with Master Collection installation because not a single product has any HELP guide!!!!
Help systems are no longer managed by the Community Help Client and are now handled by the Adobe Help Manager. There may be edge cases where Help might not appear in previous systems. Check the Adobe Help Manager and see if you can have access to the Help that you want. More on the Adobe Help Manager in this thread: http://forums.adobe.com/thread/1000134

FAQ: What are the best resources for Premiere Pro CS6?

Here are high quality resources for troubleshooting and tutorials related to Premiere Pro CS6.
Premiere Pro CS6 troubleshooting articles
Issue: I'm having trouble downloading and installing Premiere Pro CS6. What do I do?Answer: See troubleshooting documents, post in the appropriate forum, or contact support.
More info: http://blogs.adobe.com/aftereffects/2013/09/troubleshooting-issues-with-downloading-and-in stalling-after-effects.html
Issue: What are the system requirements for Premiere Pro CS6?See this article: http://helpx.adobe.com/premiere-pro/system-requirements.html#Adobe%20Premiere%20Pro%20CS6% 20system%20requirements
Issue: Why won't Premiere Pro CS6 play back AVCHD media?Answer: Update to Premiere Pro CS6 (6.0.5). Previous versions of CS6 had this issue.
More info: http://blogs.adobe.com/premierepro/2013/08/premiere-pro-cs6-6-0-4-update.html
Issue: Does Premiere Pro CS6 work with OS X 10.9 (Mavericks)?Answer: Yes, make sure you update to Premiere Pro CS6 (6.0.5)
More info: http://blogs.adobe.com/premierepro/2013/10/premiere-pro-and-mac-os-x-10-9-mavericks.html
Issue: Is there a trial available for Premiere Pro CS6?Answer: Yes, subscribe to the free version of Creative Cloud, then download the trial.
Issue: I'm having unexpected behavior in Premiere Pro CS6 and want to trash preferences. How do I do that?Answer: See this blog post: http://blogs.adobe.com/genesisproject/2011/02/premiere-pro-cs5-maintenance-two-great-tips. html#more-537
Issue: I'm getting errors related to QuickTime. What do I do?Answer: See this blog post for troubleshooting items related to QuickTime: http://blogs.adobe.com/aftereffects/2011/02/troubleshooting-quicktime-errors-with-after-ef fects.html
Premiere Pro CS6 tutorials
Issue: I'm new to Premiere Pro CS6. How do I get started?Answer: See this blog post: http://blogs.adobe.com/kevinmonahan/2011/05/20/getting-started-with-adobe-premiere-pro-cs4 -cs5-cs5-5/
Issue: I'm switching to Premiere Pro CS6 from Final Cut Pro 7. Are there any tips for me?Answer: See this article by Scott Simmons on Pro Video Coalition: http://provideocoalition.com/ssimmons/story/105_adobe_premiere_pro_cs6_questions_answered
Issue: I just switched to Premiere Pro CS6 from Final Cut Pro 7. Are there any missing features between the applications?Answer: See this article: http://provideocoalition.com/ssimmons/story/10_fcp_things_fcp_editors_might_be_missing_in_ adobe_premiere_pro_cs6
Issue: Are there any good, free Premiere Pro CS6 tutorials available?Answer: See these tutorials: http://library.creativecow.net/series/Premiere-Pro-Basics-CS6--above-with-Andrew-Devis
Issue: How do I optimize Premiere Pro CS6 for best performance?Answer: See this article: https://www.video2brain.com/en/courses/after-effects-premiere-pro-performance-workshop
Issue: How do I operate the multicam function in Premiere Pro CS6?See this article: http://provideocoalition.com/ssimmons/story/working_with_multicam_in_adobe_premiere_pro_cs 6

Hi ..
GO to website www.Apache.org
down load Apache tomcat server .
install it ...
Go to sun site
c and download jsp tutorials ...
Go to
(www.coreservlets.com)download book core servlets
u can find lots of nice books supported by sun on sunwebsite ...
Now u r equipped ....
start doing everything (R &D) on server ..
Join This JSP forum and ask any thing u didnt got ..or learn or get confused..
I thing once u go through this ..it will do all what u want
Hope it helps
Best of Luck :)
regds & take care

How to search for Premiere Pro Help, tutorials, and so on

Similar Messages

Maybe you are looking for