How to search in MONI
Dear Friends,
1. There is a scenario FILE to IDOC.
2. In a day we are posting around 4 thousand IDOCs in R/3.
3. In MONI all messages are successful.
4. But in R/3 some IDOCs are in error.
Now our requirement is to find a particular message in MONI based on some value from IDOC for example. I know we can just open the message and can find it in payload but since there are 4 thousand messages therefore it is not possible to go one by one in each payload.
Can anyone suggest me how to make a search in MONI, or is there any other configuration setting by which I can make a search ?
Regards,
Sarvesh
Hi Sarvesh,
This is one of the Better way
have a look at the Time stamp in We05 of that Errored Idoc
& make a sort based on that time stamp at the time of SXI_MONITOR in XI
And also make a note of that Idoc Number from We02 and compare with that Idoc Number in Moni after u oped the payload by sorting the processed messages with that Time stamp
We will wait for other experts views also
Regards
Seshagiri
Similar Messages
-
how to search for a badi
srinivas.Hi Srinivas,
Good
Check this link
/people/alwin.vandeput2/blog/2006/04/13/how-to-search-for-badis-trace-it
Run this program
*& Report ZNEGI16 *
REPORT ZNEGI16 .
TABLES : TSTC,
TADIR,
MODSAPT,
MODACT,
TRDIR,
TFDIR,
ENLFDIR,
SXS_ATTRT ,
TSTCT.
DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA : FIELD1(30).
DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS : P_TCODE LIKE TSTC-TCODE,
P_PGMNA LIKE TSTC-PGMNA .
DATA wa_tadir type tadir.
START-OF-SELECTION.
IF NOT P_TCODE IS INITIAL.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
ELSEIF NOT P_PGMNA IS INITIAL.
TSTC-PGMNA = P_PGMNA.
ENDIF.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR
WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR
WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR
WHERE FUNCNAME = TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
WHERE PGMID = 'R3TR'
AND OBJECT in ('SMOD', 'SXSD')
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT
WHERE SPRSL EQ SY-LANGU
AND TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(105) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
Sorting the internal Table
sort jtab by OBJECT.
data : wf_txt(60) type c,
wf_smod type i ,
wf_badi type i ,
wf_object2(30) type C.
clear : wf_smod, wf_badi , wf_object2.
Get the total SMOD.
LOOP AT JTAB into wa_tadir.
at first.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Enhancement/ Business Add-in',
41 SY-VLINE ,
42 'Description',
105 SY-VLINE.
WRITE:/(105) SY-ULINE.
endat.
clear wf_txt.
at new object.
if wa_tadir-object = 'SMOD'.
wf_object2 = 'Enhancement' .
elseif wa_tadir-object = 'SXSD'.
wf_object2 = ' Business Add-in'.
endif.
FORMAT COLOR COL_GROUP INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 wf_object2,
105 SY-VLINE.
endat.
case wa_tadir-object.
when 'SMOD'.
wf_smod = wf_smod + 1.
SELECT SINGLE MODTEXT into wf_txt
FROM MODSAPT
WHERE SPRSL = SY-LANGU
AND NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
when 'SXSD'.
For BADis
wf_badi = wf_badi + 1 .
select single TEXT into wf_txt
from SXS_ATTRT
where sprsl = sy-langu
and EXIT_NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED ON.
endcase.
WRITE:/1 SY-VLINE,
2 wa_tadir-OBJ_NAME hotspot on,
41 SY-VLINE ,
42 wf_txt,
105 SY-VLINE.
AT END OF object.
write : /(105) sy-ULINE.
ENDAT.
ENDLOOP.
WRITE:/(105) SY-ULINE.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No.of Exits:' , wf_smod.
WRITE:/ 'No.of BADis:' , wf_badi.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'No userexits or BADis exist'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
data : wf_object type tadir-object.
clear wf_object.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(8) EQ 'WA_TADIR'.
read table jtab with key obj_name = sy-lisel+1(20).
move jtab-object to wf_object.
case wf_object.
when 'SMOD'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
when 'SXSD'.
SET PARAMETER ID 'EXN' FIELD SY-LISEL+1(20).
CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
endcase.
Solution 2
1.Get the Package of the program name of the transaction.
2.Go to Transaction SE18.
3.Press F4 on the badi definition name.
4.Click the information systems button.
5.Give the Package name and press enter.
6.Select the BADI that is relevant to the application.
Good Luck and thanks
AK -
How to search a specific topic in a forum?
How to search a specific topic in a forum? who can offer me a solution. I'm really appreciate it.
Enter something in the box next to the words Advanced Search at the upper right and click on the button to display a list of search hits. Then, in the box to the right of the list, click on the word help to bring this Search Help and Tips page up:
http://search.java.sun.com/search/java/help.jsp -
How to search whether a seat is available or not?
Hi,
I am developing a form in admin module for a call centre where there is a requirement to check whether a seat is available or not? The form contains a search window which the user enters the date in Location,catergory,From_date,to_date,time_from,time_to fields.
For example if he enters time_from as 06:00and time_from as 14:00 .That means the seat is occupied for 8 hours but is available for the remaining 16 hours. So the search result should show this seat also in the availability list. Every seat hava a unique seat_id.
another situation is a seat can be allocated between 22:00 and 06:00.That means it is crossing the day.That means that means in a day the seat is allocated from 00:00 - 06:00 and 22:00-23:59. How to search for this?
The seat can be allocated for any number of hours in a day. It can be 2 hours .3 hours or 4 hours....means there is no particular time slot system.
Can this be done using a sql query or plsql procedure?
can anybody help me in this regard
Thanking you,
DeekshitHi
U can use the following query in function.
SELECT CASE dumm
WHEN 'X'
THEN 'OK'
END
FROM (SELECT NVL (dummy, 'Y') dumm
FROM DUAL
WHERE TO_DATE (new_date_entered in varchar format, 'hh24:mi:ss') BETWEEN TO_DATE
(date_from in varchar format,
'hh24:mi:ss'
AND TO_DATE
(date_to in varchar format,
'hh24:mi:ss'
But need to b careful when the dates r changing. U can check dat by comparing time_from nd time_to values...in case of date change time_from value will be greater than time_to value(assumption==> seat can't be blocked for more than 12 hours). U can actually use the same query by reversing the conditions.. hope this will solve the problem
Message was edited by:
Arpit -
How to search the indexes in 11g Enterprise Manager Console
Hi,
After setting the Indexes using Java Embedding for a process, can you please tell me how to search the indexes in 11g Enterprise Manager Console for the particular process.In 10g BPEL Console we have the option of searching the Instances based on Indexes we already set at process level which is inbuilt in 10g. I need the same in 11g .
Thanks,
Sagar.Hi Sagar,
You can define composite sensors in your composite.
Then you will get fields in enterprise manager of that composite instance.(the sensors you have defined will be displayed here)
You can enter the values based on what you want to search the instance. :)
Regards
PavanKumar.M -
How to search a text in text area?
Hi All,
I want to search a text in the text area and it should be like searching by the Find Dialog Box with upward direction or downward direction with case sensitive option.
I know searching text in a file. But I dont know how to search in the above manner.
PLz help me.
Thanx in advance.
regardsOk, starting from the code you sent, I can help with the below code:
private void findText() {
// your searching stuff here...
}Regards. -
How to search for file in jsp page
i need help on how to search for a file in a folder where there is a lot of subfolder.like how u search in a document in windows. i need a complete codes in jsp page.
thank you in advance.
Message was edited by:
n_dilahno i need to do a search engine in jsp page which is the j2ee.
i type smth than tat file from any folder will appear the same way when u need to search your file in a document in windows.
well can u nice people tell me where i can get the codes bcos i stinks when it come to programming.
thank you very very very much. -
How to search a special string in txt file and return it's position in txt file?
How to search a special string in txt file and return it's position in txt file?
I just posted a solution for a similar question here: http://forums.ni.com/ni/board/message?board.id=170&view=by_date_ascending&message.id=362699#M362699
The top portion can search for the location of a string, while the bottom portion is to locate the position of a character. Both can search for a character.
The position of the character within the file is displayed in the indicator(s).
R -
How to search data from a context node.
Hi Friends,
Thanks for ur help for previous problem . I am facing some other problem i.e how to
search data from a context node.
i have a context node :-
Car(main node) which consist of details, owners, engine and Brand as its sub node.
the value attibutes of difft nodes are:-
Car- category
Details- Mileage, Price, registration_no, miles_used
owner - name, phnno,addrs
Brand - main_brand, co_brand
Engine- Bhp,Rpm
Now i have to apply a search criteria on the basis of price, miles_used .
pls help to implement that .
Thanks & regards
Pravin jhaHi PRAVIN,
What I can understand from your problem is that, you have a list with various properties and you want to display them and search them in your WD App. If I am correct, use the following approach:
Instead of using "details, owners, engine and Brand" Nodes, use the attributes inside the parent node. i.e in the node Car, add all the attributes viz. Mileage, Price, registration_no, miles_used, name, phnno,addr etc.
Now you can create a table of this node "Car" and can easily search on the basis of any criteria.
I hope this solves your issue. If you are looking for something else, please revert, I'll be happy to help you.
Cheers!!!
Umang -
How to search this value in oracle database to find out the table
Hi expert,
I know there is a value in oracle database, please show me how to search this value in oracle database to find out the table holding this value.
Many Thanks,918440 wrote:
Hi friends,
this question is really practical, I already know there is value from application saved in database, I want to search the whole database to figure out which table the value is contained.write SQL that writes SQL to query every table.
Handle: 918440
Status Level: Newbie
Registered: Mar 2, 2012
Total Posts: 20
Total Questions: 10 (10 unresolved)
why do you waste time here when you NEVER get any answer to any question you post? -
How to search records in a standard table with * ?
Hi everyone,
Can anyone tell me how to search records in a standard table with * ?
That is, in screen if user type * abc * for searching the records in which the field MC_STEXT contains 'abc'. What the code should be? How to complete the code below?
SELECT SINGLE objid FROM p1000 INTO p1000-objid,
WHERE MC_STEXT = ? .
Thanks!Hi
There are several way to do that, probably just as some guys wrote the easier way is to use LIKE in WHERE condition and the sign % instead of *:
V_STRING = '%ABC%'.
SELECT SINGLE objid FROM p1000 INTO p1000-objid,
WHERE MC_STEXT LIKE V_STRING.
U can also use a range (just like select-options):
RANGES: R_MC FOR P1000-MC_STEXT.
R_MC-LOW = 'ABC'.
R_MC(3) = 'ICP'.
APPEND R_MC.
SELECT SINGLE objid FROM p1000 INTO p1000-objid,
WHERE MC_STEXT IN R_MC.
Max -
How to search table in R3 and XI?
hi pals,
how to search table in R3..like if i go to se16..then if in enter *ara then f8 should give table details..is it right..
or se 16 i have to give ara like this..plz correct me how to search in se16 or other than this tcode se11 only...is it right...if any other way i can search table plz tell me...
thanks
RubanHi,
Please try these ...
1. Go to transaction SE11.
2. Enter Database table with KNA1.
3. Click on Display button.
4. System will display the detail components/fields of table KNA1.
5. Click on Contents button (CTRLShiftF10) to see contents of table KNA1.
Regards,
Ferry Lianto -
How to search a network/external hard drive in finder?
I use my Macbook at work where I am required to save all files I work on to a network hard drive on our server. I also have to be able to find and access files from the network drive for customers. In Snow Leapord I had the ability to type in the search bar in finder and it would search the entire network drive and find what I was looking for very quickly. Lots of people at work access the network drive, and every one of them has a different sense of organization. The ability to search is an absolute must in order to find anything. After upgrading to Lion, I discovered that the ability to search a networked or external hard drive has been removed. Lion only allows me to search my local hard drive in my Macbook. Does anyone know how to search a network hard drive in Lion? If not I am going to have to eat the 30 bucks and downgrade back to Snow Leopard. I have scoured through every little preference and option and have found nothing that even sounds remotely like it has anything to do with the search feature. Anyone please help, if not I am going to have to break out the time machine backups and remove this broken os from my computer.
system preferences, spotlight, privacy, add the network or external hard drive and then remove it from the privacy list. it should start to reindex this drive. You'll experience some slowness while this is happening and depending on how big your network is, it might take a really long time. But after that, you should be able to search in them as well. You can also organize what types of files show first so you can navigate to them easier.
hope this helps -
How to search for particular string in array?
I am struggling to figure out how to search array contents for a string and then delete the entry from the array if it is found.
The code for a program that allows the user to enter up to 20 inventory items (tools) is posted below; I apologize in advance for it as I am also not having much success grasping the concept of OOP and I am certain it is does not conform although it all compiles.
Anyway, if you can provide some assistance as to how to go about searching the array I would be most grateful. Many thanks in advance..
// ==========================================================
// Tool class
// Reads user input from keyboard and writes to text file a list of entered
// inventory items (tools)
// ==========================================================
import java.io.*;
import java.text.DecimalFormat;
public class Tool
private String name;
private double totalCost;
int units;
// int record;
double price;
// Constructor for Tool
public Tool(String toolName, int unitQty, double costPrice)
name = toolName;
units = unitQty;
price = costPrice;
public static void main( String args[] ) throws Exception
String file = "test.txt";
String input;
String item;
String addItem;
int choice = 0;
int recordNum = 1;
int qty;
double price;
boolean valid;
String toolName = "";
String itemQty = "";
String itemCost = "";
DecimalFormat fmt = new DecimalFormat("##0.00");
// Display menu options
System.out.println();
System.out.println(" 1. ENTER item(s) into inventory");
System.out.println(" 2. DELETE item(s) from inventory");
System.out.println(" 3. DISPLAY item(s) in inventory");
System.out.println();
System.out.println(" 9. QUIT program");
System.out.println();
System.out.println("==================================================");
System.out.println();
// Declare and initialize keyboard input stream
BufferedReader stdin = new BufferedReader(new InputStreamReader(System.in));
do
valid = false;
try
System.out.print(" Enter an option > ");
input = stdin.readLine();
choice = Integer.parseInt(input);
System.out.println();
valid = true;
catch(NumberFormatException exception)
System.out.println();
System.out.println(" Only numbers accepted. Try again.");
while (!valid);
while (choice != 1 && choice != 2 && choice != 9)
System.out.println(" Not a valid option. Try again.");
System.out.print(" Enter an option > ");
input = stdin.readLine();
choice = Integer.parseInt(input);
System.out.println();
if (choice == 1)
// Declare and initialize input file
FileWriter fileName = new FileWriter(file);
BufferedWriter bufferedWriter = new BufferedWriter(fileName);
PrintWriter dataFile = new PrintWriter(bufferedWriter);
do
addItem="Y";
System.out.print(" Enter item #" + recordNum + " name > ");
toolName = stdin.readLine();
if (toolName.length() > 15)
toolName = toolName.substring(0,15); // Convert to uppercase
toolName = toolName.toUpperCase();
dataFile.print (toolName + "\t");
do
valid = false;
try
// Prompt for item quantity
System.out.print(" Enter item #" + recordNum + " quantity > ");
itemQty = stdin.readLine();
// Parse integer as string
qty = Integer.parseInt (itemQty);
// Write item quantity to data file
dataFile.print(itemQty + "\t");
valid=true;
catch(NumberFormatException exception)
// Throw error for all non-integer input
System.out.println();
System.out.println(" Only whole numbers please. Try again.");
while (!valid);
do
valid = false;
try
// Prompt for item cost
System.out.print(" Enter item #" + recordNum + " cost (A$) > ");
itemCost = stdin.readLine();
// Parse float as string
price = Double.parseDouble(itemCost);
// Write item cost to data file
dataFile.println(fmt.format(price));
valid = true;
catch(NumberFormatException exception)
// Throw error for all non-number input (integers
// allowed)
System.out.println();
System.out.println(" Only numbers please. Try again.");
while (!valid);
// Prompt to add another item
System.out.println();
System.out.print(" Add another item? Y/N > ");
addItem = stdin.readLine();
while ((!addItem.equalsIgnoreCase("Y")) && (!addItem.equalsIgnoreCase("N")))
// Prompt for valid input if not Y or N
System.out.println();
System.out.println(" Not a valid option. Try again.");
System.out.print(" Add another item? Y/N > ");
addItem = stdin.readLine();
System.out.println();
// Increment record number by 1
recordNum++;
if (addItem.equalsIgnoreCase("N"))
System.out.println();
System.out.println(" The output file \"" + file + "\" has been saved.");
System.out.println();
System.out.println(" Quitting program.");
while (addItem.equalsIgnoreCase("Y"));
// Close input file
dataFile.close();
if (choice == 2)
try {
Read user input (array search string)
Search array
If match found, remove entry from array
Confirm "deletion" and display new array contents
catch block {
} // class
// ==========================================================
// ListToolDetails class
// Reads a text file into an array and displays contents as an inventory list
// ==========================================================
import java.io.*;
import java.util.StringTokenizer;
import java.text.DecimalFormat;
public class ListToolDetails {
// Declare variable
private Tool[] toolArray; // Reference to an array of objects of type Tool
private int toolCount;
public static void main(String args[]) throws Exception {
String line, name, file = "test.txt";
int units, count = 0, record = 1;
double price, total = 0;
DecimalFormat fmt = new DecimalFormat("##0.00");
final int MAX = 20;
Tool[] items = new Tool[MAX];
System.out.println("Inventory List");
System.out.println();
System.out.println("REC.#" + "\t" + "ITEM" + "\t" + "QTY" + "\t"
+ "PRICE" + "\t" + "TOTAL");
System.out.println("\t" + "\t" + "\t" + "\t" + "PRICE");
System.out.println();
try {
// Read a tab-delimited text file of inventory items
FileReader fr = new FileReader(file);
BufferedReader inFile = new BufferedReader(fr);
StringTokenizer tokenizer;
while ((line = inFile.readLine()) != null) {
tokenizer = new StringTokenizer(line, "\t");
name = tokenizer.nextToken();
try {
units = Integer.parseInt(tokenizer.nextToken());
price = Double.parseDouble(tokenizer.nextToken());
items[count++] = new Tool(name, units, price);
total = units * price;
} catch (NumberFormatException exception) {
System.out.println("Error in input. Line ignored:");
System.out.println(line);
System.out.print(" " + count + "\t");
System.out.print(line + "\t");
System.out.print(fmt.format(total));
System.out.println();
inFile.close();
} catch (FileNotFoundException exception) {
System.out.println("The file " + file + " was not found.");
} catch (IOException exception) {
System.out.println(exception);
System.out.println();
// Unfinished functionality for displaying "error" message if user tries to
// add more than 20 tools to inventory
public void addTool(Tool maxtools) {
if (toolCount < toolArray.length) {
toolArray[toolCount] = maxtools;
toolCount += 1;
} else {
System.out.print("Inventory is full. Cannot add new tools.");
// This should search inventory by string and remove/overwrite matching
// entry with null
public Tool getTool(int index) {
if (index < toolCount) {
return toolArray[index];
} else {
System.out
.println("That tool does not exist at this index location.");
return null;
} // classData file contents:
TOOL 1 1 1.21
TOOL 2 8 3.85
TOOL 3 35 6.92Ok, so you have an array of Strings. And if the string you are searching for is in the array, you need to remove it from the array.
Is that right?
Can you use an ArrayList<String> instead of a String[ ]?
To find it, you would just do:
for (String item : myArray){
if (item.equals(searchString){
// remove the element. Not trivial for arrays, very easy for ArrayList
}Heck, with an arraylist you might be able to do the following:
arrayList.remove(arrayList.indexOf(searchString));[edit]
the above assumes you are using 1.5
uses generics and for each loop
[edit2]
and kinda won't work it you have to use an array since you will need the array index to be able to remove it. See the previous post for that, then set the value in that array index to null.
Message was edited by:
BaltimoreJohn -
How to search a term in the source code
Hello ,
How to search a term in the source code. I have selection screen , on which a program name will be given and term to search. How can I proceed to know whether this term is available in the source code of the program
Thanks and regards,
SatyaHi naga,
1. one option is to retrive the source code of the requried program,
into internal table using the syntax READ REPORT (just see f1 help on it)
READ REPORT prog INTO itab [MAXIMUM WIDTH INTO wid].
2. Then we can loop / search the internal table for the required term.
regards,
amit m.
Maybe you are looking for
-
FM / BAPI Inbound delivery creation for a Purchase Order without material
Dear All, I have a requirement to create a Inbound Delivery for a Purchase order without material number. The Purchase Order has only Material text and no material number. Please let me know a BAPI or FM to create inbound delivery in this case where
-
Trouble with Macbook Air to VGA display using miniplug.
I purchased a plug that fits into the digital output and has a VGA female plug on the other end. I have connected this with a VGA cable to a monitor. I can see about half of the desktop (the default celestial stars picture) but no desktop Icons that
-
EA 3.0 returns error on compiling of package body
Hi, I got the following error Error: ORA-06550: line 1, column 64: PLS-00172: string literal too long when I was trying to compile package body. In previous version of SQL DEV the package is compiled without any problems. I have a procedure in packag
-
How do i copy The iMovie video from Mac, to iPad mini?
How do i copy The iMovie video from Mac, to iPad mini?
-
Having trouble with drawing a Car with TurtleGraphics
hey guys i need help on a program that should draw a car, erase it, and draw it again but in a different spot on the window. Now I have all of this except when the car is drawn again the wheels aren't moved with the car. Heres the main: import Turtle