How to search markers from multiple sequences

I'm trying to figure out a way to search marker keywords from multiple sequences within a single PrProj file. I have several sequences imported into a single project file, and each of the sequences have several markers with keywords. Is there a way to search all the markers from all the sequences without having to select each individual sequence and search each one?

Hi Charliepus,
Is there a technical reason why this fundamental feature is not available? a reason other than "because"? that's the reason I got from support chat. seriously, the lack of global marker search is like a dictionary out of alphabetical order.
I'm not sure the exact reason, but anything's possible with software. If you have a moment, feel free to create a feature request: http://adobe.ly/feature_request
I think it would be a great (if not necessary) update to this feature.
Thanks,
Kevin

Similar Messages

How to setup Compressor to create video from multiple sequences within FCP?

I am wondering how I can set compressor up to create videos from multiple sequences within FCP. When I click file -> export - > compressor for a sequence and go into the program, it doesn't allow me to go back into FCP. I just get a spinning beach ball. Is there no way to set it up so I can prep a bunch of fcp sequences within compressor and then click submit and walk away? I have over 100 sequences that need to be exported so it would be a little difficult to do this one at a time. Thanks.

Batch processing
*Step one. Make sure everything in every sequence is rendered.*
*Step two. Make a folder somewhere and name it something relevant.*
*Step three. In FCP select all you sequences that you want to compress and right click (option), choose Batch Export from the contextual menu.*
*Step three point one. In the batch export window click on settings and choose the folder you made in step two for the destination. Make sure Make Self-Contained is not check and include Audio and Video.*
*Step four. Click export in the batch window.*
Once that is done you can close FCP.
Now in Compressor
*Step five. Make a setting that will give you the output that you want (mpeg2, AC3, h.264, whatever). Make a destination for where you want to save the output.*
*Step six. Make a droplet from the settings you made in step five.*
You can quit Compressor now.
*Step seven. Take the files that you batch exported from FCP in step three and four and drop them on the droplet you made in step six.*
o| TOnyTOny |o

How to Search Email in Multiple Folders at Once?

Hi,
I know how to search email in one folder, but how to search email in multiple folders at once? The only way I can think of is to go to each folder and issue a search on each folder. But if there are 10 folders, I will have to run search function 10 times. I tried to just use the folder I got from getDefaultFolder ( ) to do the search and think that it maybe the root of all folders, but it doesn't work. I have to getFolder (each_folder) and search 10 times. Does anyone know how?
Thanks.

813270 wrote:
I just want to do a global search in all folders in the most efficient manner.Iterating or recursing over the folders is not "inefficient". It's the only way to search them all. And if the API provided a method to do that "all at once," that method would still have to be iterating or recursing anyway. It doesn't matter if it's your method or theirs that makes the multiple calls.
There is a major difference between issuing one search command as a global search and 10 search commands to all 10 folders because of all these round trip traffics.And you know this because you've profiled and measured? Or you're just assuming.
Now, if you're talking about the overhead of establishing 10 network connections vs. 1, then, yes, potentially it could make a difference. But that will most likely be dwarfed by the act of searching anyway.
When there's an obvious solution in front of you, don't just go assuming it's "inefficient."

How to search data from a context node.

Hi Friends,
Thanks for ur help for previous problem . I am facing some other problem i.e how to
search data from a context node.
i have a context node :-
Car(main node) which consist of details, owners, engine and Brand as its sub node.
the value attibutes of difft nodes are:-
Car- category
Details- Mileage, Price, registration_no, miles_used
owner - name, phnno,addrs
Brand - main_brand, co_brand
Engine- Bhp,Rpm
Now i have to apply a search criteria on the basis of price, miles_used .
pls help to implement that .
Thanks & regards
Pravin jha

Hi PRAVIN,
What I can understand from your problem is that, you have a list with various properties and you want to display them and search them in your WD App. If I am correct, use the following approach:
Instead of using "details, owners, engine and Brand" Nodes, use the attributes inside the parent node. i.e in the node Car, add all the attributes viz. Mileage, Price, registration_no, miles_used, name, phnno,addr etc.
Now you can create a table of this node "Car" and can easily search on the basis of any criteria.
I hope this solves your issue. If you are looking for something else, please revert, I'll be happy to help you.
Cheers!!!
Umang

How to pickup files from multiple directories

Hi all,
How to pickup files from multiple directories and send it to two different folders at target
Ex:
files\xi\us\US.txt
files\xi\uk\UK.txt
i need to pick up the above mentioned two files and send it to the following paths
app1\files\us\download\US.txt
app1\files\uk\download\UK.txt
US.txt has to goto US folder and UK.txt has to goto UK folder only
Regards

Hi,
To pick form multiple folders, select Advanced Mode for file selection in file adapter..
there u can specify directory name/file names
Refer
/people/mickael.huchet/blog/2006/09/18/xipi-how-to-exclude-files-in-a-sender-file-adapter
To put those files at multiple folders write a command line arguments for this.. go through this weblog...
/people/michal.krawczyk2/blog/2005/08/17/xi-operation-system-command--error-catching
XI/PI: Command line sample functions
/people/michal.krawczyk2/blog/2007/02/08/xipi-command-line-sample-functions
Hope this will help you....
Regds,
Pinangshuk.

How do I select from multiple schema's

How do I select from multiple schema's
Tried:
SELECT * FROM schema1.table1, schema2.table2
WHERE schema1.table1.column1 = schema2.table2.column2;
Errored......

Thanks
We finally got in touch with our DBA and he said the same thing.
SELECT t1.*,
t2.*
FROM schema1.table1 t1,
schema2.table2 t2
WHERE t1.column1 = t2.column2;
I'll try it afther I finish a task my boss just gave me.
BRB then.

"CLOSED":How to plan inventory from multiple orgs simultaneously using MRP?

Hello everybody,
How to plan inventory from multiple organizations simultaneously using SCP?
My customer found that in supply chain planning (MRP) system always plans in single manufacturing organization, say, ATC, firstly. If set in organization item master, the source type as 'Inventory' and the source organization as another trading organization name, say, ANX. if there is insufficient inventory in ATC, SCP-MRP would plan in ANX, disregard of the inventory exist in ANX for the item.
But for some items, there are both inventory in ATC and ANX and we want plan BOTH their inventory simultaneously instad of firstly ATC and then ANX.
Is there any standard function in Oracle that can do so? I found that the sourcing rule cannot help in this case.
A simple test case is described in
https://gtcr.oracle.com/gtcr-dir/gtcr_4607/5580425.992/Alternative_to_plan_multi-org_MRP.doc
Thanks
Catalina
Message was edited by:
user447176

Catalina,
Net the inventory simultaneously? Its not quite clear what your client wants.
Even in the old SCP, you can use sourcing rules to first net inventory in org1 and then net the inventory in org 2 via a transfer from rule. The key point is it is always incremental based on where you place teh demand and then you provide source to fill that demand.
One restriction that ASCP still has up to 11.5.10 is that you can only have sourcing rules going in one direction. This means that you can't have a rule that sources ORG1 from ORG2 for item A, then have the revers in ORG2 sourcing from ORG1. That won't work, ASCP will randomly ignore one of the rules.
The best choice may be to use GOP with a sourcing split % so that yo do consider the inventory in both orgs when demanding the order, but it would still be done by checking ORG1 then ORG2.
Hope this helps.
Kevin Creel

How to import photos from multiple iphoto libraries to iPad

How do I import photos from multiple iPhoto libraries from my iMac to the new iPad? I have 4 different iPhoto Libraries on my iMac.
I can import photos from iPhoto library 1, to the iPad, but when I import photos from iPhoto Library 2, created on my iMac to the iPad,
it deletes the original photos that I imported from the first iPhoto Library and replaces them with the import from library 2.
I only want to import selected photos from each library to my iPad. Can someone plese help me?

As Ralph has suggested, if you want to sync photos from your computer, you must include all photos that you want to sync - with each and every sync. You cannot import photos from another Main photo folder on the computer. You must create an all-in-one photo library in iPhoto and sync from that folder. You can select one level of sub folders from within that main folder, but all of those folders must be included in the main folder - in your case it is in iPhoto. That is just how the sync process works with Photos.
I don't know how using third party apps affects the photos that you have already synced from iPhoto, but take a look at these apps in this Google search. Maybe Wifi transfer is the way to go for you.
http://www.google.com/search?q=wifi%20photo%20transfer%20computer%20to%20iPad

How to print to video multiple sequences

I currently utilize FCP4 HD. How can I print to tape/video multiple sequences without nesting?
G4 Power Mac Desktop Mac OS X (10.3.9) FCP4 HD

David,
I respectfully disagree. I call 'nesting' the merging of all clips in a selected group into one quasi-clip (Sequence->Nest Items). Sort of like like merging layers in Photoshop with the difference being that in FCP you can still access individual clips or layers in a nest by double-clicking to open the nest in it's own Sequence.
You can apply a filter globally to a nest by dropping the filter on the nest - the filter will affect every clip within the nest. You can't do that with the copy & paste method.
The copy & paste method doesn't merge anything; all clips and layers remain as they did in the Sequence from which they were copied.
Calling that method 'nesting' would only serve to confuse people because they are two distinctly different actions and treated differently by FCP.
-DH

How to extract data from multiple tables (always got errors)

Dear Experts,
I have a simple mapping to extract data from multiple tables as a source (A, B, C) to a target table (X). Below is the picture:
(Sources)....(Target)
A----------------***
B----------------X
C----------------***
Sample Source Data:
Table A:
ColA1
100
200
etc
Table B:
ColB1 ColB2 ColB3
10 Y Ten
20 Y Twenty
30 Y Thirty
etc
Table C:
ColC1 ColC2
11
12
13
etc
Target table (X) should be (just has 1 group INGRP1):
ColA1 ColB1 ColB3 ColC1
100 10 Ten 11
100 10 Ten 12
100 20 Twenty 21
etc
Scenarios:
1. Directly map from A, B, C to X. Unable to map with error message: "API8003: Connection target attribute group is already connected to an incompatible data source. Use a Joiner or Set operator to join the upstream data first before connecting it into this operator."
2. Map each source to Expression Operator and then map from each Expression to target table. I am able to map all attributes successfully but got error when validating it with message: "VLD-1104: Attributes flowing into TEST.EXPR_SRC.INGRP1 have different data sources."
How can I achieve the correct mapping for this purpose?
Use Joiner? I have no key to join the sources
Use Set? The sources have different number of columns
Thanks in advance
Prat

Thanks Nico,
I think it will results data like this:
100 10 Ten 11
200 20 Twenty 12
300 30 Thirty 13
etc
and not the expected:
100 10 Ten 11
100 10 Ten 12
100 20 Twenty 21
etc
But it inspired me to solve this by adding key expression in each source table (B & C) to be joined to table A with this formula:
100+TRUNC(INGRP1.COLB1,-2)
Regards
Prat

JDBC-XI-FILE scenario. How to extract data from multiple tables

Hi,
At this moment I didn't have the access for XI system. So here I have some silly question. Could you please clarify the same ??
If I got to extract data from single table using JDBC adapter I can put the below query in communication channel
SELECT *FROM orders WHERE new='true'.
But if I got to extract data from multiple tables, logic to be used should be like as shown below. ( from previous thread------prabhu).
SELECT <Table_2>.EID, <Table_2>.FName, <Table_2>.LName, <Table_1>.REC_DAT, <Table_1>.DESCRP
FROM <Table_1> INNER JOIN <Table_2> on
<Table_1>.CARDNO = <Table_2>.CARD
where REC_DAT = <condition>
union
SELECT <Table_2>.EID, <Table_2>.FName, <Table_2>.LName, <Table_1>.REC_DAT, <Table_1>.DESCRP
FROM <Table_1> INNER JOIN <Table_2> on
<Table_1>.CARDNO = <Table_2>.CARD
where REC_DAT = <condition>
But my query is ........how to put the above entire code in one line. (i.e in Qery place of communication channel ) ??
Thanks
Kumar

Hi Palnati,
You either use a select query with join or a stored procedure which will contain the logic to extract the data from multiple tables. But, the limitation in case of stored procedure is u can hv only one selct query in it.
You write ur actual query provided in the parameter 'Query SQL Statement". u can also wrt a stored procedure in it. Also, u can provide a update statement in it which will update a certain flag so tht u don selct the data again.
Check the following link
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm">http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm</a>
Regards,
Akshay
Message was edited by:
Akshay Salunke

How to retrieve "KeyValue" from multiple Shape paths then "SetValue" to Mask path Keyframes?

Hello AEScriptsComm.,..
i have one question (hopefully the tutorer will answer soon), which is the goal and reason i'm learning ExtendScripts:
I have a few dozen Adobe Illustrator, imported Shape Layers with paths "Created..from Vector Layers" in AEffects.
In order to use a .jsxbin script to change every path to the same number of verticies for animating, i must 1st convert them to Keyframes on the same Mask Path property.
1) i hoped to please be shown\sent an example showing how to,..
a) Get\Retrieve "KeyValue" from multiple, single (Shape Layers):Outlines > Contents > Group > Path > Path as shown in screenshot "4-CreateShapeFromVecLyr2Outlines.JPG",
and then,..
b) "SetValue" from those paths into Mask > Mask Path keyframes also in screenshot "1-ExtendScript_ShapePathsTOMaskPathKeyframes.JPG"?
Really appreciate any help soon as time allows,
Jeff

Hello Xavier,
esp. with my limited experience i can't determine how your concise script works.
Because it 1st errors esp. with undefines i'm thinking at best its incomplete (or algorithm) to give me the gist and i'm to fill in the blanks, which i am doing with the sort of working code example pasted below.
Its written with every definition, declaration and initialization completed, so a novice like me can read the manuals, rev. eng. pertinant script(s), then with fragmented code and understanding quickly connecting to form a complete custom script, as we've all done.
like this:
var comp = app.project.activeItem:
var layer = comp.layers.addSolid([1,1,1,], layerName, comp.width, comp.height, 1.0, comp,duration);
therefore,..
var CompLayerSolid = app.project.activeItem.layers.addSolid([1,1,1,], layerName, comp.width, comp.height, 1.0, comp,duration);
..then with such direct access in other essentials, i can substitute compatible properties, methods, parameters etc. and remaining code that affect the layer objects i need to control simultaneously. Also thereby learning more complex code quickly enough to use.
Only, i hoped to save time here by those already familiar.
But by comparison your script without declarations or many references in AE's CS6 Scripting Guide and online, i can't decipher or understand,
although you wrote this more complete segment at CCow:
"shapeLayer.content.addProperty("ADBE Vector Graphic - Fill");",
..in which is the addProperty i 1st looked for in your script after erroring with "ShapeLayer is undefined"
But i could'nt find a ref. to either .content or content. anywhere in ExtendScript, nor "targetLayer.mask", and "targetLayer" i found once in ref. to ExtendScript as an AE layer name. So perhaps their your variables?, you see i can't determine or use.
i don't know that was'nt meant, maybe a bit to tell me do my own research?, no offence, can't confirm that without reply, hope you will, but my research is why i'm here and your probably advanced script could only help with your assistance.
Thanks anyway,
Cheers.
function()
var comp = app.project.activeItem;
var masksLayer = comp.selectedLayers[0];
var masksGroup = masksLayer.property("ADBE Mask Parade");
app.beginUndoGroup(rd_MasksToShapesData.scriptName);
// Create an empty shape lay
// Get the mask layer's pixel aspect; if layer has no source, use comp's pixel aspect
var pixelAspect = (masksLayer.source != null) ? masksLayer.source.pixelAspect : 1.0; //copixelAspect;
// Iterate over the masks layer's masks, converting their paths to shape paths
var mask, maskPath, vertices;
for (var m=1; m<=masksGroup.numProperties; m++)
var suffix = " Shapes";
var shapeLayer = comp.layers.addShape();
shapeLayer.name = masksLayer.name.substr(0,31-suffix.length) + suffix;
shapeLayer.moveBefore(masksLayer);
var shapeLayerContents = shapeLayer.property("ADBE Root Vectors Group");
var shapeGroup = shapeLayerContents; //.addProperty("ADBE Vector Group");
//shapeGroup.name = "Masks";
var shapePathGroup, shapePath, shapePathData;
// Get mask info
mask = masksGroup.property(m);
maskPath = mask.property("ADBE Mask Shape");
// Create new shape path using mask info
shapePathGroup = shapeGroup.addProperty("ADBE Vector Shape - Group");
shapePathGroup.name = mask.name;
shapePath = shapePathGroup.property("ADBE Vector Shape");
shapePathData = new Shape();
// ...adjust mask vertices (x axis) by pixel aspect
vertices = new Array();
for (var v=0; v<maskPath.value.vertices.length; v++){
vertices[vertices.length] = [maskPath.value.vertices[v][0] * pixelAspect, maskPath.value.vertices[v][1]];
shapePathData.vertices = vertices;
shapePathData.inTangents = maskPath.value.inTangents;
shapePathData.outTangents = maskPath.value.outTangents;
shapePathData.closed = maskPath.value.closed;
shapePath.setValue(shapePathData);
shapeLayer.transform.anchorPoint.setValue(masksLayer.transform.anchorPoint.value);
shapeLayer.transform.position.setValue(masksLayer.transform.position.value);
shapeLayer.transform.scale.setValue(masksLayer.transform.scale.value);
if (masksLayer.threeDLayer)
shapeLayer.threeDLayer = true;
shapeLayer.transform.xRotation.setValue(masksLayer.transform.xRotation.value);
shapeLayer.transform.yRotation.setValue(masksLayer.transform.yRotation.value);
shapeLayer.transform.zRotation.setValue(masksLayer.transform.zRotation.value);
shapeLayer.transform.orientation.setValue(masksLayer.transform.orientation.value);
else
shapeLayer.transform.rotation.setValue(masksLayer.transform.rotation.value);
shapeLayer.transform.opacity.setValue(masksLayer.transform.opacity.value);
// Match the mask layer's transfor
// Mute the mask layer
masksLayer.enabled = false;
app.endUndoGroup();

How to select data from multiple dropdowns(HTMLDB)

Hi,
How to get the data from multiple dropdowns in the same report. Both the dropdowns are gerring data from the same table.
Ex:
abc-1st dropdown
pqr-2nd dropdown.
when abc and pqr are blank, it should display all records by default. If abc="some value" and pqr is empty then it should display all values corresponding to abc.
Regards,
Pallavi

Pallavi,
I think this might be something you are looking for:
http://htmldb.oracle.com/pls/otn/f?p=31517:99
There are some examples on how to modify your SQL to get it working the way you want.
Denes Kubicek

How to manage photos from multiple accounts

Hi,
i am trying to solve one problem. I have one iMAC where i have two user profiles connected to different AppleIDs. Next to it there are two iPhones and two iPads. I am trying to find out, how to manage photos from all these devices using one account on iMAC. Second question is if there is any finction in iPhoto that can publish images to NAS server? Second alternative for me is to byu iCloud drive space and use Family sharing for publishing photos. Bellow text schema is attached, it is only my idea and i dont know if this could work like this. Did anyone somehow solved this configuration? Thanks

I can see the screenshot if I double click on it. However, here is it again. Being Halloween maybe it'll show.

How to submit data from multiple Input Ports in single SUBMIT button click

Hi,
I am in SPS8.
What exactly steps I need to perform to submit data from multiple Input Ports.
I couldn't able to submit One input Form and one Input Table to BAPI data service in single SUBMIT button click.
I debugged the VC application in SPS8.
While debugging, I found that when I click the SUBMIT button in the Input Form, Only data in that Input
form are being passed to the BAPI, But not the Table Form data.
If I click on the SUBMIT button in another Input Table, Only data from that table is being passed to the BAPI, but not the Input form data.
Essentially I need to submit both of them in one SUBMIT button.
Thanks,
Ramakrishna

Ramakrishna,
From the word document that you sent to me the steps you are missing to map the appropriate information into the BAPI is first you are not mapping all data rows into the table input port. To do this double click on the input table view and change your selection mode from single to multiple. Then when you click on your link between the BAPI and your input table you will see a new option appears under data mapping "Mapping Scope" select All Data Rows.
That's the first part of the problem to get the BAPI to recognize both the inputs coming from the form and the table eliminate the submit button from the form. Drag and drop a link from the output port of the table view to the Input port of the BAPI. Double click on the link between the BAPI and the table view and open the expressions editor for the two fields:
1/ Automatic Source
2/ SKIP_ITEMS_WITH_ERROR
On the hierarchical folder structure on the right expand expand the Data Fields node to find the fields from the form and map them accordingly.
Now when you hit the submit button on your table it should pass the BAPI all the parameters from both the form and the table.
Hope this helps,
Cheers,
Scott

How to search markers from multiple sequences

Similar Messages

Maybe you are looking for