How to search the entire catalog
Question: I've got loads of folders in my library, and they span over several pages on the Folders section in the Library module. But, when I want to search for a photo using the Library filter, I need to always first, move my mouse and click manually over the Folders section to the top Parent folder before I can do a search on the entire catalog.
I was wondering how you go about searching the entire catalog, but with a quicker solution? I don't want to always have to find the most parent folder and click on it before I do a search across the entire library.
Thanks in advance!
shaibn wrote:
Question: I've got loads of folders in my library, and they span over several pages on the Folders section in the Library module.
Maybe time to think about re-organising folders into sub-folders? I got into the same position, and then created folders for each year, so I don't see individual folders unless I want to:
If you do that, remember to do it from inside Lightroom (just drag folders around) or Lightroom gets thoroughly confused.
Similar Messages
-
How to search the indexes in 11g Enterprise Manager Console
Hi,
After setting the Indexes using Java Embedding for a process, can you please tell me how to search the indexes in 11g Enterprise Manager Console for the particular process.In 10g BPEL Console we have the option of searching the Instances based on Indexes we already set at process level which is inbuilt in 10g. I need the same in 11g .
Thanks,
Sagar.Hi Sagar,
You can define composite sensors in your composite.
Then you will get fields in enterprise manager of that composite instance.(the sensors you have defined will be displayed here)
You can enter the values based on what you want to search the instance. :)
Regards
PavanKumar.M -
Photoshop Elements 10 will not allow me to back up the entire catalog.
Photoshop 10 will not allow me to back up the entire catalog. During its initial set up, when it runs the space needed, it stops at 18% and will not go beyond that
Here is what I am doing. In Elments Orgainizer, I am going to FILE, then selecting Back Up Catalgo to CD,DVD or Hard Drive, then I select- Full Back Up, then it goes to Calculate Total Media Space and that is where is stops at 18%Thanks for the response
My OS is Win 7 Home Prem
The catalog is over 60GB and over 31,000 images
There are only a few videos in the catalog
I am backing up to a hard drive that is a 2TB drive
I can not even get to select the drive, as the system stops as it calculates the amount of space needed. -
How to install the Recovery Catalog
Hi:
How to install the recovery catalog? I used the following commands from the menu and it didn't work:
connect rman/rman
@?/rdbms/admin/catrman
There is no catrman.sql exists.
Thank you very much.If you are using Oracle8i, make sure your compatibility is set to at least 8.1.0 and you are connected to the catalog database. Then type create catalog; at the RMAN command line.
-
How to download the entire creative suite
how to download the entire creative suite cs6 design suite and web premium from download center?
Go to http://www.adobe.com/go/tryincopy and click the Download button. The Adobe Download Assistant will popup and handle it from there.
-
How to make the entire project in the project server 2013 reschedule؟
How to make the entire project in the project server 2013 reschedule ?
Because item %compelet related to reschedule
In this photo it is known there are no items update projectHi,
In PWA, you do not have the feature to update the project plan in one click, meaning marking as completed the work before the status date or reschedule after the status date the remaining work. Either you have to use Project Pro, or edit individually the
assignments with the actual work (if not comming from timesheets) and remaining work.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller | -
How to display the entire application in two different languages in apex
Hi,
How to display the entire application in two different languages in apex...
For example i need to display each item in both English and Hindi..
To achieve this initially i have the select the language otherwise the item label alone ll be displayed in both languages ...
Anyhow how it ll be apex is it possible
Regards,
PavanHi pars,
http://www.packtpub.com/sites/default/files/1346-chapter-6-creating-multilingual-apex-applications.pdf?utm_source=packtp…
In this link also i struck in
In page 10 of that document
The application is now ready to be translated. Everything is in place to run it in any language imaginable.To ca ll the application in another language, change the URL of your application to the following:
http://yourdomain:port/pls/apex/f?p=&APP_ID.:&PAGE_ID.:&SESSION_ID.:LANG:NO::FSP_LANGUAGE_PREFERENCE:nl
This example will call the chosen page in the application and show it in the Dutch language instead of in English. To select another language change the property nl at the end of the URL to your desired language code.
Thanks alot for ur suggestions.kindly provide more inputs.............. -
How to recompile the entire schema's INVALID objects in one go?
Hi,
How to recompile the entire schema's invalid database objects (such as package, function, procedure, trigger etc) in one go?
Please advise.
Thank you.I often use this SQL.
select 'Alter ' || OBJECT_TYPE || ' ' || OBJECT_NAME || ' compile;' as DDL
from user_objects
where STATUS = 'INVALID';I sometimes use this SQL.
declare
WK_InvalidCount pls_Integer :=0;
WK_PrevInvalidCount pls_Integer :=0;
begin
loop
for rec_work in (select a.object_type,a.object_name from user_objects a ,user_object_size b
where a.status='INVALID' and a.object_name=b.name order by b.code_size
) loop
dbms_ddl.alter_compile(rec_work.object_type,user,rec_work.object_name);
DBMS_Output.Put_Line(rec_work.object_name || 'is recompiles');
end loop;
select count(*) into WK_InvalidCount from user_objects where status='INVALID';
if WK_InvalidCount=0 then
DBMS_Output.Put_Line('InvalidObject none');
exit;
elsif WK_InvalidCount != WK_PrevInvalidCount then
WK_PrevInvalidCount := WK_InvalidCount;
else
DBMS_Output.Put_Line('InvalidObjects remain' || to_char(WK_InvalidCount));
exit;
end if;
end loop;
end;
/ -
How to refresh the filed catalog of POWL
Hi all,
How to refresh the field catalog of POWL? The requirement is that the result list should meet the selection/query criteria. Even the system has executed the mehod GET_FIELD_CATALOG in feeder class, the filed catalog still keep the the original look. I have to switch to other query and then reswith back, then the field catalog changed to the new one.
Thanks & best regards
JuliaHello,
When you refresh the query, only then it goes to the method you have mentioned.
Also when you switch between the query, you have to do the refresh manually or there is personalization for query, On every visit of page, This option is avaible from 7.02 release.
Best regards,R
Rohit -
How to search the batch?
hi gurus
how to search the batch?use batch search strategy
go to logisitic genral >batch management>batch management and stratefgy>
define selction rule
define sort sequence
define condition table
define acess sequence
define condition type
and maintin the sort rule and selction rule in condition type
assign the condition type to the batch search procedure
activate it for the movement type
create condition record in mbc1 -
Please guide how to search the Body to add more TAB in CIN Details.
Regards,
Manish JainI wanted to add more TAB in CIN details for Excise Range & Division address
-
My email won't send as when it was set up an extra letter was accidentally inserted in the address. I need to know how to remove the entire email address and start a fresh.
Launch Mail.app, select Mail > Preferences... > Accounts and select the account you need to edit in the left column.
The receiving information will be displayed for the selected Account, with a pop-up selector for the Outgoing Mail Server (SMTP) toward the bottom. That selector shows which mail server will be used with this account; to send mail.
Click and hold on that selector, and scroll down (holding the mouse or trackpad clicked) to Edit Mail Server List... and you'll get a sheet dropping down with the mail servers listed.
Select the problematic mail server, and edit it using the Account Information and Advanced items on that sheet. -
Keyword search of entire catalog
I have many of my photos tagged. When I do a keyword search, it only searches the current directory - not even the sub-directories. How do I get the search to go through my entire catalog?
You are probably trying to do this in Folder Location View.
You need to switch to Thumbnail View.
Both views can be seen from the Display Menu.
http://help.adobe.com/en_US/elementsorganizer/using/WSE9967EB0-E0BB-40c5-BC75-CB3C3FCEA70B _WIN.html -
How to delete the entire calendar app
There are recurring events in my calendar that I cannot delete. When I click on the event, edit is not an option, so I never get to a screen that offers a delete option. Instead it offers me to say 'maybe' or 'decline' or 'accept.' I have tried "searching" for the first time the event was entered so I can delete that....to no avail.
So what I'd like to do is just delete the entire calendar and start over. How to do that?
<Edited by Host>Is this a synced calendar or just on the phone?
For a synced calendar, you will need to go to the Settings App > Mail,Contacts,Calendar and remove it from there.
For a calendar on the device, open the calendar app > Calendars > Seelct the calendar(s) in question (tap on the blue arrow to the right) > scroll down and tap Delete Calendar.
You might find the user guide helpful: http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
Message was edited by: James Ward4 -
How to get the entire database from remote server to my server
Hi,
I am running a web application with sample data. Now i need to access the original data through this application. But the original data is located in the other server which is located in Mumbai.
Now i need the copy of that database to my system(Chennai). with minimum effort.
It is very urgent...
Thanks in advance...
Chaitanya.Hi
Nicolas is right. You can also take advantage of exp/imp utility. That would not only get the entire db in one file but also the size will be a fraction of the entire db size.You can search for DataPump (that uses expdp and impdp) utility to expedite the export/import process.
For simple exp/imp you can do the following.
From Remote site(MUMBAI) issue
ORACLE_HOME\BIN\exp file=c:\fulldbexp09sept05.dmp log=c:\fulldbexp09sept05log.log FULL=Y userid=system/pwd@connectstringOfyourdb
Get a copy of fulldbexp09sept05.dmp and place it on your local drive in Chennai
On Local Site (Chennai)
ORACLE_HOME\BIN\imp file=fulldbexp09sept05.dmp log=fulldbimp09sept05 FULL=Y userid=system/pwd@connectstringOfyourlocaldb
By this you can take advantage of having a different db name on remote and local sites. This is a fairly easy exercise. You just need to be sure that in your TNSNAMES.ORA you have correctly defined the connectString for your db.
PS: Create a database on local server with default settings.
Make use of following to create appropriate tablespaces and users if you desire ie.
1. On Remote Site open SQLPLUS session and issue this command to find out the tablespaces, datafiles and their sizes
SQL>SELECT SUBSTR(file_name,1,60) FILE_NAME, tablespace_name, bytes
FROM dba_data_files
GROUP BY tablespace_name, file_name;
Now create the tablespaces on local sites using the result of the above query.
2. On Remote Site open SQLPLUS session and issue this command to spool user creation script.
SQL>spool c:\createuserscript.lst
SQL> SELECT 'CREATE USER ||' IDENTIFIED BY VALUES '||'"'||PASSWORD||'"'||' DEFAULT TABLESPACE '||DEFAULT_TABLESPACE||' TEMPORARY TABLESPACE '||TEMPORARY_TABLESPACE||';'
FROM dba_users
WHERE username NOT IN ('SYS','SYSTEM')
ORDER BY username;
SQL>spool off
Now edit this createuserscript using any editor and replace " with '. Copy this file to the local server and run it using @. This will create appropriate users.
Let me know if you have any problems.
Regards
Adnan Mashhadi
Nicolas I am not sure as how to eliminate the " in my script. Any comment will be appreciated.
Maybe you are looking for
-
The first day I got it, it was fine. Then when I woke up the next day which was less than 12 hours after hooking it up, it wouldn't connect..it let me type a couple of characters to my password, but then literally stopped. My trackpad has yet to have
-
when trying to send a comment to discussion sites I get an error message that says "Firefox has blocked this site" actions offered "allow" or "X". When I enter "allow" it ignores the command and the message disappears. A lot of wasted thought and typ
-
Crystal Reports and SAP Function Modules
Hi Am very new to Crystal Reports. Am developing a new report. my question is can I link a SAP FM on crystal and will it display the results on the FM on crystal.
-
We have installed JES2005Q1 on solaris 10, and it worked well. But after setting some configrations on WEB server admin console and apply changes, the server.xml has been changed automatically, returning to original unconfigured version, many items s
-
Sliding a bookmark link into the body of an email
Everything was working fine until the update yesterday. Now I cannot slide a link into the body of my Hotmail emails. The long URL appears in black ink when what was always the blue renamed link that I use. Also, the Properties do not come up any lon