How to search the indexes in 11g Enterprise Manager Console
Hi,
After setting the Indexes using Java Embedding for a process, can you please tell me how to search the indexes in 11g Enterprise Manager Console for the particular process.In 10g BPEL Console we have the option of searching the Instances based on Indexes we already set at process level which is inbuilt in 10g. I need the same in 11g .
Thanks,
Sagar.
Hi Sagar,
You can define composite sensors in your composite.
Then you will get fields in enterprise manager of that composite instance.(the sensors you have defined will be displayed here)
You can enter the values based on what you want to search the instance. :)
Regards
PavanKumar.M
Similar Messages
-
How to replace self-signed certificate for enterprise manager console
Does anyone know how to change self-signed certificate for https access to Enterprise Manager console, which is issued during installation of Oracle 11g?
Well, this might not be much help, but for 10g, on AIX, docID 1171558.1 describes how to create a new certificate.
Not sure how relevant it will be for 11g, sorry :( -
Error in soa 11g enterprise manager console
I am getting this error, enterprise manager was working fine before,
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding addressr u able to login to the weblogic console??
if yes please check the listen address and port?/
and check in the deployments in the EM is in started mode or prepared mode.
rebounce the server it should be solved -
Strange problem with 10G using client installed enterprise manager console
I have successfully installed 10G on our SUSE linux 9.0 server, I have created 6 databases (standard edition of the database) and verified their parameter files, control files, and database files are in different locations --- all done at the server console. I created my DBA account on all 6 databases and logged into each one to verify their function.
I returned to my PC where I have installed the 10G client and where I have used the 8 and 9 enterprise manager console to manage my databases. I got the TNSNAMES file in order for the new databases. I logged into the first database and tested my workstation connectivity successfully , I logged into the second database and it said my password was incorrect. I ended up signing in on the second database with my first databases account password. (it then worked). I got fed up hopping around with the mystery with the password being stored somewhere in the enterprise manager java ? and logged in as system and changed all of my passwords. I then went up to the console and found that the only database that they changed on was the first one.
I returned to my workstation and started creating the data files and users and roles in the first database. I now on either workstation in my office, when logging in as ANY of the six database DBA accounts, can see all the objects I created in the first database.
I went to the server console and logged in and verified that the objects only exist in the first database. For some reason the enerprise manager console is really a problem. I have windows XP. Our database is on 10G but we are not taking advantage of grid control due to budget reasons (one server only).
I have heard there is a url based web management console at: http://serverip:5500/em, but it is not working currently in our environment and it will be up to our sys. engineers to release / open up that port through our DMZ. Ordinarily would this allow the kind of control that the old enterprise manager console would?
Is my installing the grid conrol product going to be "overkill" and not useful for me or should I install it?
Is there an alternative 10G version of the enterprise manager console for simpler environments like mine?
Is there a good explanation why my workstations are presenting "false" cached information above what is really in the database for objects unique to each database - ie: why are my #1 database objects showing up in EMC as objects in all databases and why is EMC managing/storing my passwords.?
I just need to get the best choice to manage my environment.
I know I have asked a lot of questions and I would appreciate any insight from someone who has encountered this before.fixed
- the alias in the TNSNAMES was correct but the actual database "service_name" was the first db - -- a long project / late night oversight. I also went into the sysman\ifiles\ and corrected the entry for the database there too where it had registered the settings for the wrong database. -
How to get the index of a h:column element?
Hi!
I'd like to know how to get the index of a <h:column> element.
Here is the code of what I'm trying to do:
<h:column>
<a:commandLink
value="#{familyAction.familyDocsByPrj}"
action="#{homeAction.search(ROW_INDEX)}"
reRender="rightAppPanel" />
</h:column>When clicking a row, I'd like to make a "search" depending on the selected row.
Does anybode know how to do that?
Thanks a lot :)Thanks a lot for all your answers! :)
I finally got to do something with my little knowledge =P
I created a new class containing all the data needed for the dataTable (including a "String id").
And that's what I get:
<h:column>
<a:commandLink
value="#{familyAction.familyDocsByPrj.name}"
action="#{homeAction.search(familyAction.familydocsByPrj.id)}"
reRender="rightAppPanel" />
</h:column> -
How to check the host name or rename the host name in Enterprise Manager
Hello,
How do i check the host name or rename the host name in Enterprise Manager for Oracle 11g?
Regards,
Ming Manthere is a shell script called chgip or something
like that is there . I used it for IAS. I beleive the
same is there for database too
Rajesh AlexIf there is, I have not been able to find it.
Off the top of my head, changing the host name involves at least the following (others feel free to add on):
For listener and connectivity
- listener.ora
- tnsnames.ora (on all clients as well)
- potentially ldap.ora (on all clients as well)
- init.ora parameter LOCAL_LISTENER
For admin using Enterprise Manager (starting 10g)
- the contents of the sysman schema
- the directory name of the OEM agent directory
- the directory name of the OEM OC4J config directory
- various config files in the OEM OC4J config directory
Oracle provides the emca to handle this last set.
In addition, the following refer to hosts that are [probably] not local
- init parameter REMOTE_LISTENER (usually just points to a tnsnames.ora entry naming remote hosts)
- init parm SMTP_OUT_SERVER
Again, adding to the list might be interesting. -
How to search the content of TPL files?
Hi. I have a folder with hundreds of template "tpl" files that I'm needing to search the file contents of but using the regular search of that folder is unable to search the content of the tpl files, is it possible to do so?
Thanks!,
WesleyI assume there's not a "scan all files" with Spotlight?
I don't think that would be possible in the specific case of content searches. Here's my understanding:
EasyFind searches the files themselves when it looks for content, which makes it slow but very flexible.
In contrast, Spotlight searches a pre-existing index when it looks for things - it can be instructed to search the index in various ways, but if the desired information is not in the index in the first place, it won't be found. Indexing the content of every file in the system is not feasible, so only the contents of certain file types get indexed. I found the following in [this Wikipedia article|http://en.wikipedia.org/wiki/Spotlight_%28software%29]:
Aside from basic information about each file like its name, size and timestamps, the mdimport daemon can also index the content of some files, when it has an Importer plug-in that tells it how the file content is formatted. Spotlight comes with importers for certain types of files, such as Microsoft Word, MP3, and PDF documents. Apple publishes APIs that allow developers to write Spotlight Importer plug-ins for their own file formats.[3]
So unless you'd care to write your own Spotlight Importer plug-in for tpl files, I think you are out of luck! -
How to use the index method for pathpoints object in illustrator through javascripts
hii...
am using Illustrator CS2 using javascripts...
how to use the index method for pathpoints object in illustrator through javascripts..Hi, what are you trying to do with path points?
CarlosCanto -
How to get the index of selected values in SelectManyChoice...
How to get the index of selected values in SelectManyChoice... the value which i get is coming when i submit the value second time
By using the given code i get the value of the selected indices, but problem here is i get the value when it get submits at the second time... First time the length of that int array is 0.
Second time it shows the value two times (i.e) First time submitted value and the second time submitted value. After that it works fine.. I have problem while clicking first time only..
The Following error also raises.. One multiselect is dependent on other multiselect.
DF_FACES-60098:Faces lifecycle receives unhandled exceptions in phase PROCESS_VALIDATIONS 3
java.lang.ArrayIndexOutOfBoundsException: 6
at oracle.adfinternal.view.faces.model.binding.FacesCtrlListBinding.findObjectFromIndex(FacesCtrlListBinding.java:334)
at oracle.adfinternal.view.faces.model.binding.FacesCtrlListBinding.getInputValue(FacesCtrlListBinding.java:199)
at oracle.jbo.uicli.binding.JUCtrlValueBinding.internalGet(JUCtrlValueBinding.java:2416)
at oracle.jbo.uicli.binding.JUCtrlListBinding.internalGet(JUCtrlListBinding.java:3717)
at oracle.adfinternal.view.faces.model.binding.FacesCtrlListBinding.internalGet(FacesCtrlListBinding.java:500)
at oracle.adf.model.binding.DCControlBinding.get(DCControlBinding.java:749)
at javax.el.MapELResolver.getValue(MapELResolver.java:164)
at com.sun.faces.el.DemuxCompositeELResolver._getValue(DemuxCompositeELResolver.java:176)
at com.sun.faces.el.DemuxCompositeELResolver.getValue(DemuxCompositeELResolver.java:203)
at com.sun.el.parser.AstValue.getValue(Unknown Source)
at com.sun.el.ValueExpressionImpl.getValue(Unknown Source) -
How to display the index of current desktop when enable multiple spaces
I was using 10.6 before and used to using Spaces and puts applications into different desktops.
Now I'm using 10.8 and I know that the Spaces has been integrated into Mission Control.
The problem is, I can see the current desktop on the top bar in 10.6, but in 10.8 I cannot see it so I usually forget where I am.
Does anyone know how to display the index of current desktop?Does anyone know how to display the index of current desktop?
Brute force - - I have written the number of the Desktop directly onto the wallpaper picture I am using for each Desktop (easy to do with Preview).
All Desktops are using different wallpaper photos, so they are easily recognized by the color scheme, and in the upper left corner is the number.
Regards
Léonie -
How to Return the Index of a Mouse-Selected Array Element in the View Interface of Diadem
Hello,
Does anybody have an idea of how to obtain the index of a mouse-selected array element in the View interface of Diadem??
Thanks!Hi Ovidius,
Keep explaining. The only way I know of to trap a selected cell value in VIEW is to embed into the desired VIEW area a second non-modal SUDialog that has a Table control or an XTable control displaying the values of certain data channels. There are callbacks in both table controls for cell selection, and you can configure the table control to allow only single cell selection if that's what you want. The regular table control will be easier to program, but the XTable control will perform much better for larger channels.
But what happens with that value the user selected? Is it used for a calculation? Is it added to a report? Why would the user select that cell in a table rather than selecting the corresponding feature in a graph with the crosshair cursor?
Brad Turpin
DIAdem Product Support Engineer
National Instruments -
How to search the batch?
hi gurus
how to search the batch?use batch search strategy
go to logisitic genral >batch management>batch management and stratefgy>
define selction rule
define sort sequence
define condition table
define acess sequence
define condition type
and maintin the sort rule and selction rule in condition type
assign the condition type to the batch search procedure
activate it for the movement type
create condition record in mbc1 -
Please guide how to search the Body to add more TAB in CIN Details.
Regards,
Manish JainI wanted to add more TAB in CIN details for Excise Range & Division address
-
How to start the enterprise Manager console in GUI based.
I am totally confuse while using oracle10g Enterprise Manager Console based. I can't able to get the administrator privileges. Even though I had the administrator privileges and password I knew. But while administrating through Enterprise Manager in 10g little bit confuse for me.
Help me .. I am here to hear a quick response as soon as possibleDBA database privilege is different from EM Administrator privilege. Check to ensure you have the right one.
-
Unable to drop Oracle Enterprise Manager console in Oracle 11g
Hello all,
I am trying to drop the Oracle Enterprise Manager console in Oracle 11g (Windows server 2008 32 bit). I am getting the following error.
D:\Oracle\Ora11G\BIN>emca -deconfig dbcontrol db -repos drop
STARTED EMCA at Jun 16, 2009 9:59:58 PM
EM Configuration Assistant, Version 11.1.0.7.0 Production
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Enter the following information:
Database SID: NM45
Listener port number: 1529
Password for SYS user:
Password for SYSMAN user:
Password for SYSMAN user:
Do you wish to continue? [yes(Y)/no(N)]: y
Jun 16, 2009 10:00:20 PM oracle.sysman.emcp.util.EMCALogManager addLogFileIntern
al
WARNING: Adding log file D:\Oracle\Ora11G\cfgtoollogs\emca\ENMSCSDB\emca_2009_06_16_22_00_20.log failed. Messages will not be logged in this file.
Jun 16, 2009 10:00:20 PM oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at D:\Oracle\Ora11G\cfgtoollogs\emca\ENMSCSDB\emca_2009_06_16_22_00_20.log.
Jun 16, 2009 10:00:21 PM oracle.sysman.emcp.util.DBControlUtil stopOMS
INFO: Stopping Database Control (this may take a while) ...
Jun 16, 2009 10:00:22 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Can't find file D:\Oracle\Ora11G\F1SMLFS_NM45\sysman\config\emoms.properties
Refer to the log file at D:\Oracle\Ora11G\cfgtoollogs\emca\ENMSCSDB\emca_2009_06_16_22_00_20.log for more details.
Could not complete the configuration. Refer to the log file at D:\Oracle\Ora11G\cfgtoollogs\emca\ENMSCSDB\emca_2009_06_16_22_00_20.log for more details.
D:\Oracle\Ora11G\BIN>
Even though the D:\Oracle\Ora11G\F1SMLFS_NM45\sysman\config\emoms.properties is exists in the disk. Any Idea.
In Oracle 9i " Enterprise manager Configuration Assistant" (Open “Start ---> Programs ----> Oracle - OraHome92 ---> Configuration and Migration
Tools -----> Enterprise manager Configuration Assistant) was present. Is there any replacement of this in Oracle 11g ?
Thanks
With Regards
Hemanthem_kec wrote:
Hello all,
I am trying to drop the Oracle Enterprise Manager console in Oracle 11g (Windows server 2008 32 bit). I am getting the following error.
D:\Oracle\Ora11G\BIN>emca -deconfig dbcontrol db -repos dropBefore this you shoud do :
ORACLE_HOME/bin/emca -x <sid>
ORACLE_HOME>/sysman/admin/emdrep/bin/RepManager <hostname> <listener_port> <sid> -action drop
Refer to the log file at D:\Oracle\Ora11G\cfgtoollogs\emca\ENMSCSDB\emca_2009_06_16_22_00_20.log for more details.did you check this log ?
Even though the D:\Oracle\Ora11G\F1SMLFS_NM45\sysman\config\emoms.properties is exists in the disk. Any Idea.yes. you could visit metalink and see 278100.1 How To Drop, Create And Recreate DB Control In A 10g Database
In Oracle 9i " Enterprise manager Configuration Assistant" (Open “Start ---> Programs ----> Oracle - OraHome92 ---> Configuration and Migration
Tools -----> Enterprise manager Configuration Assistant) was present. Is there any replacement of this in Oracle 11g ?
Thanksok
With Regards
Hemantbest regards
Maybe you are looking for
-
Error in Deploying java components - SAP NW CE 7.2 installation on Windows
Hi, I am installing NW CE 7.2 on a windows machine. I opted for custom installation. I get the below error at "Deploy java components step. Any clue on why is this happening and how to resolve ? <html> <head> </head> <body> <p> An error occurred whil
-
Itunes latest version makes it impossible to find the obscure songs I want. Apple also appears to have removed the ability to sort according to different columns like popularity, artist, album, song length, etc. Please help me find a way to find th
-
Mapping not working, but works in debug
Hi everyone, Got a strange problem with a simple mapping. The mapping does a Truncate of the target table and then must insert in that table from a view. The view via a dblink. When I run the mapping in debug everything seem fine, it does what it is
-
Reading a compress file in a jar. JarFile or JarInputStream?
I am trying to read a file out of a jar file. With the following code. Depending on where the file is I get different types of Objects returned. The file is quite big so I would like to compress it in the jar file. When I compress it I cannot use it.
-
Consignment settlement process MRKO
Hi, I am working on PO with consignment first time I have made OBYC setting for consignment KON , after that i hav ecreated PO migo and MB1B from consignment stock to own stock now i want to know the steps foe consignment seettlement how to do it wi