HOW TO SEARCH THE WEB ON SMART TV?

Hello.
You can follow the steps mentioned on the below link to access and use the Internet Browser of the TV.
https://us.en.kb.sony.com/app/answers/detail/a_id/33768/c/65%2C66/kw/33768
Regards,
ColbyP

Hi seyfo,
Welcome to Sony Community!
Thank you for your message. Kindly check the applications list one by one and you can also refresh the internet content of your TV. For best assistance with your concern. We kindly recommend visiting our Sony Global Web site for information on contacting the Sony Support Center in your region at http://www.sony.net/SonyInfo/Support/.
Thanks!
Jerome
If my post answers your question, please mark it as "Accept as Solution"

Similar Messages

Search the Web box to the right of my address bar disappeared, how do I get it back?

The "Search the Web box to the right of my address bar disappeared. How do I get it back?

It is gone in the new version of Safari and the Safari in Mountain Lion. You cannot get it back.
Search is now done inside the adress bar, so you did not lose the search functionally. The location has changed.

I am trying to search the web when I click on Firefox Icon this message shows up Offline Mode Fire Fox is currently in offline mode and can not browse web how do I fix this?

I am trying to search the web when I click on Firefox Icon this message shows up Offline Mode Fire Fox is currently in offline mode and can not browse web how do I fix this?

Firefox does not have a built-in "Run" option on downloads for security reasons. If you "Run" an item, your anti-virus/anti-spyware may not have an opportunity to fully examine the contents until it is already installed on your hard drive. Result: damage, if infected, is already installed on your system.
With that in mind, you can install the following add-on, but you accept the risk mentioned above ('''NOTE:''' the developer has not updated this product -- OR any of his other 7 extensions -- to be compatible beyond Firefox 3.6.x; therefore, when you upgrade to a more current version of Firefox, you may lose the functionality of the add-on if the developer does not update it.):
*https://addons.mozilla.org/en-US/firefox/addon/opendownload/
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You need to update some plug-ins:
*Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]

I want google as my search engine, not Bing. How do I make Google the default search engine in the "Search the Web" feature of the search bar; or, how do I remove the "Search the Web" feature of the search bar so that "Google" can be default?

I want google as my search engine, not Bing. But no matter what I do in "Manage Search Engines," Firefox seems to reset to "Search the Web," which uses Bing.
How do I make Google the default search engine in the "Search the Web" feature of the search bar; or, how do I remove the "Search the Web" feature of the search bar so that "Google" can be default? When I move "Search the Web" down and "Google" up, the search bar resets every time Firefox reloads.

Sometime Bing is not located in the Add/Remove programs section of the control panel.
6 Easy Steps to Remove Bing from Mozilla Firefox:
1. Click on the "inverted triangle" located to the right of the orange Bing icon.
2. Select the option "Manage Search Engines...". (A pop-up window will appear titled "Manage Search Engine List.)
3. Select "Bing".
4. Click the "Remove" button.
5. Select the desired search engine from the list.
6. Click "OK"
All Done.... :-)
Happy Searching...
Long version: https://support.mozilla.com/en-US/kb/Search%20bar?s=bing&as=s

I would like to add to the Safari toolbar on my ipad 5 IOS 6 machine. I have searched the web and find some instructions to do this but the words and pictures do not match what I can see. I am beginning to think this is not a capabilty of the ipad 5

I would like to add to the Safari toolbar on my ipad 5 IOS 6 machine. I have searched the web and find some instructions to do this but the words and pictures do not match what I can see. I am beginning to think this is not a capabilty of the ipad 5 but perhaps for a Mac computer running Safari. Does anyone know if it is possible to add tools to the toolbar on the latest version of iPad OS & Safari Browser? If so please tell me how. Thanks

You cannot customize the Safari toolbar on the iPad.
What you can do on the iPad is go to Settings>Safari>Always show Bookmarks Bar>On and that will add a bookmarks bar on to the Safari browser.

Help reqd for searching the web

Hi
The code which i have written to search the web
ctx_ddl.create_preference('my_url','URL_DATASTORE');
ctx_ddl.set_attribute('my_url','HTTP_PROXY','www-proxy.us.oracle.com');
ctx_ddl.set_attribute('my_url','NO_PROXY','us.oracle.com');
ctx_ddl.set_attribute('my_url','Timeout','300');
create table urls(id number primary key, docs varchar2(2000));
create index datastores_text on urls ( docs )
indextype is ctxsys.context parameters ( 'Datastore my_url' ); I made a small change in the table inserted like this
insert into urls values(111555,'http://www.oracle.com')
When i recreated the index I got the error like this
ERROR at line 1:
ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
ORA-20000: Oracle Text error:
ORA-00600: internal error code, arguments: [kghfrf1], [0x0], [], [], [], [],
ORA-06512: at "CTXSYS.DRUE", line 157
ORA-06512: at "CTXSYS.TEXTINDEXMETHODS", line 176
When i checked the ctx_user_index_errors table i didnt get much info.
My qn. is
1. What is the problem is there any more setting should i use (using Oracle 9i AS)
1. And if i want search only in Html section of the domain where should set the path.
2. If i put a html section group and filter <h1>, will this be a problem in searching
documents.
Thanx
K P Hari

Not a direct answer to your problem I know, but I noticed you posted a few days ago asking whether there was a crawler available. I would suggest you check out Oracle UltraSearch to see if it will meet your needs better than creating an index like you are doing. I think you'll be pleasantly surprised at how easy the setup is!

Why does Siri always give me Jillian Ye when searching the web?

I have enjoyed using Siri on my new iPhone 5. However, anytime Siri asks me if I would like her to search the web for something she always comes back with the contact information for a Jillian Ye. I have yet to actually have her truly search the web. Is this normal? If not, how can I get it to cha

If you are still having problems you want to look at this conversation....
Still not managed to sort it out when you ask Siri to do a search for something when it asks you... "do you want me to search the web for...".... "It comes back with a non helpful response of... "I thought so"
I am sure that its the way you ask it.... Didn't used to be like this... I think it may have been a update. Very anoying https://discussions.apple.com/message/20201974#20201974
https://discussions.apple.com/message/20201974#20201974

My hp pavilion g series won't search the Web after downloading window 10

I downloaded window 10 and my laptop would start but will not log on or search the Web.

Hi there
Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel. I understand that you are having trouble with log on and web functionality. I am happy to help. Please post the full product number for your notebook. See the following, if you need help with that information.
How Do I Find My Model Number or Product Number?
What operating system did you have before installing Windows 10?Did you have any network problems before the upgrade? Also did you do the upgrade process or a clean installation of windows 10? When you mentioned a logon problem, do you mean to get onto your computer or to get onto a website?Are you connected to your network properly, and is it a wireless or cabled connection? Please let me know.

Hello I don't know who to complain to as you do not appear to have a complaints department, despite searching the web, I trust you can pass this to relevant department for action, as I'm very angry over my recent repair. Following my issue relating to a

Hello
I don't know who to complain to as you do not appear to have a complaints department, despite searching the web, I trust you can pass this to relevant department for action, as I'm very angry over my recent repair.
Following my issue relating to a blank screen 2 weeks ago, your advisor arranged for my iMac to collected by Amsys, for repair and return, this was done and it was returned to me last Tuesday, onWednesday I set up my iMac again and instantly realised I had problems, much worse than before. I called Amsys to inform them of the issue of the computer being very very slow and unable to open iPhoto and pages, and document listing would not show up, plus I had no sound on the mac.They informed me that they had only replaced the video card and what they had done would have not affected the computers performance. He suggested I reinstall OSX again which I did, but this made no difference to the programs, so I called you.
Your technician on the phone was very good as they have always been, and made an appointment for me to go into the Milton Keynes Apple store the next day at 1 pm, which I did.
The gentleman on the Genius Bar was very good and was able to run tests on the iMac in my presence, and diagnosed immediately an issue with the sound problem, and advised me that this could not be fixed while I wait and I would need to leave it for repair. I made him aware of the previous repair, and he was able to see via your system, the list of logged issues I have had with this since purchasing in September 2012. I'm sure you can see from the way you record all calls and issues the problems I have had.
Today I called to ask if my iMac would soon be ready for collection, I was told the repairs had been completed and it was being tested. However to my dismay, I learned of another serious issue relating to the repair carried out by Amsys. I was informed that 6 screws were missing from the the iMac internally, which caused me much distress and concern, they also told me I had to wait even longer as the screws had to be ordered and installed on arrival before I could collect it.
My issues here are: I trusted the Amsys repairer as it was arranged and recommend by you, it is very evident they are not competent to repair, as they have caused more problems with my iMac on its return, despite enclosing a checklist, fully ticked showing everything working well, it clearly wasn't ! Plus the issue of missing parts (screws) during the repair, I have already expressed my disgust with Amsys, by email and had a response, within the hour, apologising and told me they were looking into this.
This where I stand on this, I have not had my iMac for almost two weeks and I do not know when I will get it back. I'm also very worried about what other damage has been caused by Amsys and the quality of my iMac now. I want to know what you, Apple is going to do about this ? I have already been very inconvenienced by this and until now I have been a very loyal apple customer with 2 iPads, and 4 iPhones in our household, not to mention the iMac.
I feel I have been very let down by this experience, on my iMac, which cost a lot of money, I have also lost a lot of money with lost work and unable to carry out my business without it, and I will be seeking compensation.
I trust you will take this complaint seriously and pass it to the relevant department for action.
Yours sincerely
Des Withey
Sent from my iPad
On 26 Feb 2014, at 11:44, Apple Support <[email protected]> wrote:
Thanks for contacting us.
Thanks for contacting Apple Support. If you need more help later, you can open the case below or start a new support request online.
Case ID:
Open this case
Sincerely,
Apple Support
Get help online
Visit Apple Support to learn more about your product, download software updates, and much more.
Join the conversation
Find and share solutions with Apple users around the world.
TM and copyright © 2014 Apple Inc. 1 Infinite Loop, MS 96-DM, Cupertino, CA 95014.
All Rights Reserved / Privacy Policy / Apple Support / Give us feedback
On behalf of Apple Distribution International

Call Apple Customer Relations - 1-800-275-2273. Ask politely & firmly that you want to be transferred to Customer Relations. Tell them exactly what you stated in your post.
GOOD LUCK!
These are user-to-user forums where everyday folk (volunteers) post questions and offer answers (technical support) to each other.

How to create the web template

Hi BW Experts,
how to create the web template.....!
I just want to know what is the use of Web template. i want to display the report
in WEB-UI screen ( sap-crm 7.0 portal ) can any one help me please how to proceed ...!
Thanks
shahina..!

Hiu2026
Steps to follow to create WAD in WEB Template in 3.5 or 7.0 u2026u2026..
Go to All programs and select your web application designer
Select the button to create a new page in WAD
Select the chart and place in the layout
Next goto Data provider Target and select your query
Give your report name in the given data provider screen
Select your query in History/find/Favourites/Infoareas button
Select your query in this screen and click OPEN
Now we can see the data provider is assigned to the chart.
To edit the chart you have to right click on the chart
After right click on it we will find another screen where we can edit all the settings
In this screen we can find NEXT click button to change our settings
In this screen we can state the tasks (Title, units, values, range)
In this screen we can change our background /validity/color
In this screen we can add values to the chart
In this screen we can add validity/positions/order/axis types to the chart
In this screen we can change the global settings/and overview of the chart.
This screen shows that we have customized the chart successfully
After successful creation of the chart we have to save the chart
Save your chart in your favorites by giving the description and technical name in the given block.
Now execute your WAD by selecting the execute button
The BEx Web Application Designer is a desktop application for creating Web applications with BW-specific contents. Using the BEx Web Application Designer, you can create an HTML page that contains contents such as various tables, charts or maps. This HTML page (Web application) provides the basis for not only Web applications with complex interaction, but also for Web cockpits and iViews.
http://help.sap.com/saphelp_nw04/helpdata/en/1a/456a3badc1b315e10000000a114084/content.htm
Web Application Designer for Beginners
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/749a4622-0a01-0010-36bf-b6b30a2a3a22
Web Application Solutions: A Designer's Guide
http://www.lukew.com/resources/webapplicationsolutions.pdf
http://sap.ittoolbox.com/groups/technical-functional/sap-solution-manager/bw-web-application-designer-1955944
Feautures of WAD in 7.0
http://help.sap.com/saphelp_nw70/helpdata/en/88/4d354277dcb26be10000000a155106/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5c46376d-0601-0010-83bf-c4f5f140e3d6

How to search the indexes in 11g Enterprise Manager Console

Hi,
After setting the Indexes using Java Embedding for a process, can you please tell me how to search the indexes in 11g Enterprise Manager Console for the particular process.In 10g BPEL Console we have the option of searching the Instances based on Indexes we already set at process level which is inbuilt in 10g. I need the same in 11g .
Thanks,
Sagar.

Hi Sagar,
You can define composite sensors in your composite.
Then you will get fields in enterprise manager of that composite instance.(the sensors you have defined will be displayed here)
You can enter the values based on what you want to search the instance. :)
Regards
PavanKumar.M

How to Customize the Web item " Text Elements"in WAD

Hi All,
Can any one let me know how to customize the web item TEXT ELEMENTS. When we place the web item Text element in the web template, it displays the query details and the info provider details.
I question is I do not want to list all the list that is displayed in the text elements. I want to see only part of the list....can any one whether this is possible or not..if possible how...?
Thanks in Advance,
Hash

yes you need to specify the variable name
<object>
         <param name="OWNER" value="SAP_BW"/>
         <param name="CMD" value="GET_ITEM"/>
         <param name="NAME" value="TEXTELEMENTS_1"/>
         <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_TEXT_ELEMENTS"/>
         <param name="DATA_PROVIDER" value="DATAPROVIDER_1"/>
         <param name="GENERATE_CAPTION" value="BORDER"/>
         <param name="GENERATE_LINKS" value=""/>
         <param name="SHOW_COMMON_ELEMENTS" value=""/>
        <b> <param name="ELEMENT_TYPE_1" value="VARIABLE"/>
         <param name="ELEMENT_NAME_1" value="0H_CCTR"/></b>         ITEM:            TEXTELEMENTS_1
</object>
Regards
Raja

How to config the web.xml file, when I use Richfaces + RI 1.2?

Hi there:
I want to use Richfaces + RI 1.2 to build a project. I don`t know how to config the web.xml file.
By the way, my web server is Tomcat 6.0, my JDK's version is 6u6. I don`t want to use the facelets.
thanks.
lxm

just add this before *</web-app>*
<context-param>
     <param-name>org.richfaces.SKIN</param-name>
     <param-value>blueSky</param-value>
</context-param>
<filter>
     <display-name>RichFaces Filter</display-name>
     <filter-name>richfaces</filter-name>
     <filter-class>org.ajax4jsf.Filter</filter-class>
</filter>
<filter-mapping>
     <filter-name>richfaces</filter-name>
     <servlet-name>Faces Servlet</servlet-name>
     <dispatcher>REQUEST</dispatcher>
     <dispatcher>FORWARD</dispatcher>
     <dispatcher>INCLUDE</dispatcher>
</filter-mapping>

Since Monday, Firefox times out when I search the web and I have not changed anything with the system.

I was able to search the web as late as Sunday. But since Monday I am unable to. I have changed nothing. Bookmarks, email, Facebook work. Can search on laptop using the router, so internet connection is fine. The new google search on FB doesn't work either. Nor does searching with Chrome or IE. Have reset Firefox, restarted the computer, restored computer to previous Saturday. All I get when searching is This operation timed out.

I think you must to a clean re-install, this means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!
Thank you.

Google App, lost the ability to search the web using voice, any ideas?

I have Iphone 4 and upgraded to IOS6, in the Google App, I have lost the ability to search the web using voice, any ideas?

#30 - Deck recognition after Tiger Upgrade:
Shane's Stock Answer #30:
http://discussions.apple.com/thread.jspa?messageID=1063600&#1063600
The credit for this goes to Bob Sidebotham:
I was just walked through a repair procedure by an Apple Care person, and it fixed my camera recognition problems (I have a Canon XL1 and sometime after installing Tiger, then 10.4.1, various patches (including Quicktime 7.1) and the latest Desktop Video patch, I've been unable to use the camera with Final Cut Express, and attempts to capture would result in a FCE crash).
The workaround is to download Quicktime manually, after removing the "receipts" which indicate that it is loaded. Specifically, I was told to do the following:
1. Navigate to Library -> Receipts on your main drive (not from your personal folder).
2. Remove all files of the form QuickTime*.pkg, where "*" is a version number. E.g. QuickTime600.pkg, QuickTime650.pkg, Quicktime700.pkg and QuickTime701.pkg. This simply tells your system that those packages are not installed.
3. Go to http://www.apple.com/quicktime/downloads and click on the "download Quicktime" link. DO NOT USE THE AUTOMATIC UPDATE UTILITY. Download QuickTimeInstallerX.dmg. Double click this file (probably on your desktop) and then invoke the installer by double clicking QuickTime701.pkg.
4. After your computer reboots, you should be able to restart FCP and see your camera.
Shane

HOW TO SEARCH THE WEB ON SMART TV?

Similar Messages

Maybe you are looking for