How to secure CRM and BW reports thro Portal

The requirement as below
inputs....
1. CRM & BI 7 which will be accessed via portal.
2. User is created via portal and simultaneously backend CRM system
     also get updated with User details.
3. The users are assigned to Business Partners.
4. Business partner relationships maintained in CRM for a) bill to
party
     b poster
5. There will be using SSO to access the SAP CRM & BW.
BW Design
     a. Bw reports will be built on Authorization relevant
Characteristics
               i. bill to party
            ii. poster
     b. Web templates will be designed with respective queries attached
to them
     c. web templates will be launched via I views in the portal
Requirement........
a. when a user access the BW reports based on Authorization relevant
   characteristics, he should be able to view report values only for
the allowed
   business partner.
b. more no of users will be access these reports simultaneously
c. BEST method (sap security) to restrict users in BW to View only
     valid Business Partner reporting.

What always can be done is to develop a custom portlet which doesn't display anything but just does a call to wwlog_api.some_proc.
This portlet would be quite simple to make.

Similar Messages

How to secure iPhone and iPad when traveling abroad against xtra charges

How to secure iPhone and iPad when traveling abroad against xtra charges?

You can either put them in "Flight Mode" ( Found in settings. This feature disables 3G, 4G and Wifi), or you can go into your settings and turn off mobile networking ( also found in settings, this allows you to connect to wifi, but disables mobile networking)

How to pass username and password with the portal url

i want to access portal from my web site. i have created username and password fields in my web page. when submited , my portal page should open. so how to pass username and password with the portal url.

This is not straightforward; but it is doable.
First tell us about your portal version; portal 10.1.4 has a slightly different method of doing it and the pre-10g portals were completely different animals.
And if you are in AS Rel 2, then the most important document for you would probably be the following:
[Creating Deployment Specific Pages| http://download-west.oracle.com/docs/cd/B14099_19/idmanage.1012/b14078/custom.htm#i1015535]
You might want to use it in conjunction with some metalink notes about your portal version and such a login page.
hope that helps!
AMN

CRM Interactive Reports - CRM and BI Reporting client same

Hello all,
I am setting up CRM Interactive reports in CRM 7.0 wherein the CRM client and the BI Reporting client are both the same. I know it is not recommended by SAP, but our requirement is very less.
I am following the steps as mentioned in the Best Practices C41. But, when I am trying to set up a source SAP system in RSA1(Section 4.14 of C41), i get an error saying that 'Source system XXXCLNTYYY already exists'. This is the same system which has already come under the BI node in RSA1.
Since we are using the same client for both the systems, how do I rectify this error?
Please help!
Regards
Debolina

Dear Srinivas,
One of the purposes of CRM Interactive reporting is quick-enablement of frequently used reports. Ofcourse these differ in all aspects with BI reports. These are faster and accurate when the data population is small.
It is not suggested to use dedicated BI server for Interactive reporting.
Anyways we can use both Interactive and BI reports simultaneously as per your client's requirement.
Hope it helps.
Thanks
Vikas
Edited by: Vikas Patil on Jun 7, 2010 5:58 PM
Edited by: Vikas Patil on Jun 7, 2010 5:59 PM

How to Integrate Epic and Crystal Reports

Hi,
My hospital uses both Epic and Cerner Reporting. As a business objects admin I was asked to integrate Epic with Crystal Reports. I'm Using BOE XI 3.1 and Crystal Reports 2008, I want a planning to integrate my Crystal reports server with Epic reporting. Any ideas how can I start the integration and step by step procedure to follow while integration.
Edited by: nrkc@99 on Jan 27, 2012 9:02 PM

Hi,
You might need to create ODBC connection in BOBJ server to access EPIC.
Refer to below link
http://www.ehrreporting.com/2010/08/crystal-report-epic-clarity-schema/
Thanks,
Arjun

How to config CRM and BW for IIS SOluction Database

Dear Sir,
We upgrade CRM2.0c to CRM 5.0- and solution Dtabase is not working, I don't know how to config, some person said that it need to config from CRM and BW for this features. Please kindly advise.
Thank you and best regards,
Vimo

Hi,
It is not clear what you meaning about multiple environments. Do you mean these environments are in different directories or in the same directory ? If you mean environments in different dirs share the same cache, it is interesting why you need that.
If you do not use DB_PRIVATE to open the environment, the created cache will be on disk, in the environment directory, so it can be shared by multiple processes and multiple threads. Currently, the cache file is in the environment directory, and we do not support specifying a separate directory for cache only.
Regards,
Oracle Berkeley DB.

How enable Security Section and Features on pwa sharepoint 2013

Dear Friends
how enable all Features "Security Section and Features" on site project server 2013 "PWA" SITE
I did Type Command
set-spprojectpermissionmode
Mode ProjectServer and Mode sharepoint
but Not appear Security Section in PWA Settings
how im Fix a Problem :(( Tanks a milion

Hi Tahere,
I understand that you want to know how to enable all properties pwa setting like this Database Admin in PWA Setting.
However, it is better to have one question one thread, then it will help others who have the same question as the original one can solve their problem too.
In the meanwhile, as this issue is regarding to Project Server, I recommend to post your issue in Project forum:
https://social.technet.microsoft.com/Forums/office/en-US/home?forum=projserv2010setup.
More experts will assist you, then you will get more information relation to Project server.
In addition, if you think the answer above is helpful, please mark it as an answer and it will help others who have the same issue.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

How to use awr and addm reports

Hi,
to use awr and addm reports does we should have separate license or oracle server software license is enough.
which tool do we use to read this awr and addm reports in real time.
please give your valuable suggestions.
thank you!

Seeing as you seem to want to continue the discussion on someone else's old thread rather than your own one
AWR files in oracle
If i don't then it is difficult to find the queries thata re related to my application as most of those are the sysqueries, i just need schema specific queries in the SQL ordered by Elapsed Time section. Perhaps you are using the wrong tool?
A system-level report like AWR or ADDM is no use to you as it seems your application code is not significant at the system level.
You might want to consider tracing the sessions from your application using client_id or module to identify sessions belonging to your application then possibly use TRCSESS and TKPROF.

How to display custom forms or reports on portal pages?

Hi friends
I am new to Portal. I knew that we can create forms and reports in portal.
But how can i display a custom form ( ex: employee.fmb) on a portal page?
Thanks
Ravi

Are you meaning Oracle Forms Module and Oracle Reports?
If so
please check the following
Reports
http://download-uk.oracle.com/docs/cd/B14099_15/bi.1012/b14048/pbr_conf.htm#sthref494
Forms (you can only invoke forms using the SSO)
http://download-uk.oracle.com/docs/cd/B25016_02/doc/dl/web/B14032_02/security.htm#sthref42
Otherwise you can create your custom HTML form and report using the following technologies:
http://download-uk.oracle.com/docs/cd/B14099_15/portal.1014/b14135/pdg_matrix.htm#CHDJIEIH
Please refer also to:
http://download-uk.oracle.com/docs/cd/B14099_15/portal.1014/b14135/pdg_understand.htm#sthref35
Hope this helps
Cheers
Diego

How to pass Parameter to Oracle Report from portal

Dear All
I create a report use Oracle Report, and the file name is "Account.rdf"
This report have a start date parameter and a end date parameter. I put this
report to the report server, and then add a new entry to the cgicmd.dat file,
so i enter the URL into IE and pass the start date and end date parameters to
the report.
And now, i want to put this report into portal, but how can i config the
start date parameter and the end date parameter?? i want provide a interface
to the end-user, so user can select which date he want to display. It is
possible?? How can i config?? Would you give me some idea.
Thanks for your help.
Tony

You will have to Register your .rdf in Oracle Portal. The following document gives details.
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=170178.1

How to create YTD and MTD reports using Sql Server 2008 r2 report builder 3.0

Hi All,
How can I create YTD report from the below data. please help me
ProdA     ProdB     ProdC     Month    Year
10       50        40          January     2012
Data for full Year i.e. from Jan - December 2012
50      90      100        January       2013
Data for full Year i.e. from Jan - December 2013
90      40         30        January        2014
Data for full Year i.e. from Jan - Till Date 2014
MercuryMan

You can use a correlated subquery to calculate YTD in query behind. You can use APPLY operator for that
so something like
SELECT *
FROM Table t1
CROSS APPLY (SELECT SUM(ProdA) AS TotA,SM(prodB) AS TotB,SUM(prodC) AS TotC
FROM Table
WHERE Year = t.Year)t1
And show TotA,TotB and TotC in the required total row
Another method is to add required totals in SSRS by clicking on relevant group and choosing Add Total option
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

How to call the XML Publisher Report thro Standard PO Output for Comm.

Hi
We need to call our custom report(XML Publisher Report) from the standard PO Output for Communication Report.
There is a parameter(Purchase Order Layout) in PO Output for Communication in which we can see no. of standard reports. We want to add our custom report in that list so that when we will run this standard report by selecting our custom report for Purchase Order Layout parameter, we should get the output as per our Custom report.
Since PO Output for Communication is a Java Concurrent Program, we are not able to place our custom report in the list of Purchase Order layout Parameter.
Ram

Welcome to the forums !
Pl see if MOS Doc 305307.1 (How To Modify Print PO Report POXPOPDF With Custom Template) can help
HTH
Srini

How to Integrate CRM and R/3

Hi Folks,
We have installed SAP R/3 and CRM server for production environment. But what configuration need to do to integrate both servers. And which interface will communicate with both instances. Please help
Thanks in advance,
Chimsi

Chimis,
You need to decide where you need the integration touuch points between these systems. So, you need identify the business processes where the integration is happening.
A quick example in CRM - R/3 case could be Quotation to Sales order.
Regards,
Ravi
Note : Please reward points if this helps you.

Integration: how to best access and run SAP through Portal

We are currently using Oracle Portal for publishing reports directly from our EDW, for giving access to some applications and for delivering unstructured information.
In the future we are very likely to give our suppliers and employees access to reports and interfaces for conducting transactions straight into SAP. This is most likely done via a web GUI.
One way to do this of course is to implement the SAP Portals solution, the other is to keep using Oracle Portal and access SAP Portlets/iViews from there - the latter is to be preferred based on the cost of switching platforms, but we have also to take into account the cost of integration.
So to my question: What would be the best way to integrate these to systems? Has it been done before? Is Web Services the way to go? ???????

Ajax is a microsoft toolkit that the web site is using and is not compatible with Safari. They only support I.E. and windows.
From the Safari menu bar click Safari / Preferences then select the Advanced tab. Enable the Develop menu. In the Develop menu select User Agent and then try Internet Explorer 9.

How to Deactivate MENU and SYSTEM button in Portal.

Hello,
I have created a SAP transaction iView of Y Transaction. Now it showing me all the buttons and Transaction Box on selection screen in EP. My requirement is to have only EXECUTE rest buttons should be hide.
Some of the buttons I have controlled from ABAP Program.Like SAVE,CANCEL,BACK etc.
And T-Code Box I have controlled from ICF transaction.
Follows the route: sicf->sap->bc->gui->sap->its->webgui->GUI Configuration
~WEBGUI                                     1
~THEME                                     sl
~LOGIN
~PASSWORD
~NOHEADEROKCODE     1
Now Still it showing me MENU,SYSTEM and EXECUTE button.
I want to hide MENU and SYSTEM.
Please provide me the solution.Its really very important for me.Helpful answer definely be appreciate!
Regards,
Supriya.

Hi santosh,
Thanks.
I have already checked the related note.And I am getting only Execute button when I set the parameter
~WEBGUI_SIMPLE_TOOLBAR     32 .It hides other button as well.
But I have to show another T-Code in EP it should have all the buttons SAVE,CANCEL,BACK etc.
Therefore in one report I want to show only Execute Button and in another report it should show all the button Except T-Code box.
I have hide SAVE,CANCEL,BACK button from ABAP program,except Execute Button and T-Code Box from sicf Transaction.
But shows MENU and SYSTEM button which I want to hide.
Suggest me.
Regards,
Supriya.

How to secure CRM and BW reports thro Portal

Similar Messages

Maybe you are looking for